* Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
* Copyright (c) 2003, 2004 Maciej W. Rozycki
*
- * Common time service routines for MIPS machines. See
- * Documentation/mips/time.README.
+ * Common time service routines for MIPS machines.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
+#include <linux/bug.h>
+#include <linux/clockchips.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/time.h>
#include <linux/timex.h>
#include <linux/smp.h>
-#include <linux/kernel_stat.h>
#include <linux/spinlock.h>
-#include <linux/interrupt.h>
#include <linux/module.h>
-#include <asm/bootinfo.h>
-#include <asm/cache.h>
-#include <asm/compiler.h>
-#include <asm/cpu.h>
#include <asm/cpu-features.h>
#include <asm/div64.h>
-#include <asm/sections.h>
+#include <asm/smtc_ipi.h>
#include <asm/time.h>
/*
- * The integer part of the number of usecs per jiffy is taken from tick,
- * but the fractional part is not recorded, so we calculate it using the
- * initial value of HZ. This aids systems where tick isn't really an
- * integer (e.g. for HZ = 128).
- */
-#define USECS_PER_JIFFY TICK_SIZE
-#define USECS_PER_JIFFY_FRAC ((unsigned long)(u32)((1000000ULL << 32) / HZ))
-
-#define TICK_SIZE (tick_nsec / 1000)
-
-/*
* forward reference
*/
-extern volatile unsigned long wall_jiffies;
-
DEFINE_SPINLOCK(rtc_lock);
+EXPORT_SYMBOL(rtc_lock);
-/*
- * By default we provide the null RTC ops
- */
-static unsigned long null_rtc_get_time(void)
-{
- return mktime(2000, 1, 1, 0, 0, 0);
-}
-
-static int null_rtc_set_time(unsigned long sec)
+int __weak rtc_mips_set_time(unsigned long sec)
{
return 0;
}
+EXPORT_SYMBOL(rtc_mips_set_time);
-unsigned long (*rtc_mips_get_time)(void) = null_rtc_get_time;
-int (*rtc_mips_set_time)(unsigned long) = null_rtc_set_time;
-int (*rtc_mips_set_mmss)(unsigned long);
-
-
-/* usecs per counter cycle, shifted to left by 32 bits */
-static unsigned int sll32_usecs_per_cycle;
-
-/* how many counter cycles in a jiffy */
-static unsigned long cycles_per_jiffy __read_mostly;
-
-/* Cycle counter value at the previous timer interrupt.. */
-static unsigned int timerhi, timerlo;
-
-/* expirelo is the count value for next CPU timer interrupt */
-static unsigned int expirelo;
-
-
-/*
- * Null timer ack for systems not needing one (e.g. i8254).
- */
-static void null_timer_ack(void) { /* nothing */ }
-
-/*
- * Null high precision timer functions for systems lacking one.
- */
-static unsigned int null_hpt_read(void)
+int __weak rtc_mips_set_mmss(unsigned long nowtime)
{
- return 0;
+ return rtc_mips_set_time(nowtime);
}
-static void null_hpt_init(unsigned int count)
+int update_persistent_clock(struct timespec now)
{
- /* nothing */
-}
-
-
-/*
- * Timer ack for an R4k-compatible timer of a known frequency.
- */
-static void c0_timer_ack(void)
-{
- unsigned int count;
-
-#ifndef CONFIG_SOC_PNX8550 /* pnx8550 resets to zero */
- /* Ack this timer interrupt and set the next one. */
- expirelo += cycles_per_jiffy;
-#endif
- write_c0_compare(expirelo);
-
- /* Check to see if we have missed any timer interrupts. */
- while (((count = read_c0_count()) - expirelo) < 0x7fffffff) {
- /* missed_timer_count++; */
- expirelo = count + cycles_per_jiffy;
- write_c0_compare(expirelo);
- }
+ return rtc_mips_set_mmss(now.tv_sec);
}
/*
* High precision timer functions for a R4k-compatible timer.
*/
-static unsigned int c0_hpt_read(void)
+static cycle_t c0_hpt_read(void)
{
return read_c0_count();
}
-/* For use solely as a high precision timer. */
-static void c0_hpt_init(unsigned int count)
-{
- write_c0_count(read_c0_count() - count);
-}
-
-/* For use both as a high precision timer and an interrupt source. */
-static void c0_hpt_timer_init(unsigned int count)
-{
- count = read_c0_count() - count;
- expirelo = (count / cycles_per_jiffy + 1) * cycles_per_jiffy;
- write_c0_count(expirelo - cycles_per_jiffy);
- write_c0_compare(expirelo);
- write_c0_count(count);
-}
-
int (*mips_timer_state)(void);
-void (*mips_timer_ack)(void);
-unsigned int (*mips_hpt_read)(void);
-void (*mips_hpt_init)(unsigned int);
-
-
-/*
- * This version of gettimeofday has microsecond resolution and better than
- * microsecond precision on fast machines with cycle counter.
- */
-void do_gettimeofday(struct timeval *tv)
-{
- unsigned long seq;
- unsigned long lost;
- unsigned long usec, sec;
- unsigned long max_ntp_tick;
-
- do {
- seq = read_seqbegin(&xtime_lock);
-
- usec = do_gettimeoffset();
-
- lost = jiffies - wall_jiffies;
-
- /*
- * If time_adjust is negative then NTP is slowing the clock
- * so make sure not to go into next possible interval.
- * Better to lose some accuracy than have time go backwards..
- */
- if (unlikely(time_adjust < 0)) {
- max_ntp_tick = (USEC_PER_SEC / HZ) - tickadj;
- usec = min(usec, max_ntp_tick);
-
- if (lost)
- usec += lost * max_ntp_tick;
- } else if (unlikely(lost))
- usec += lost * (USEC_PER_SEC / HZ);
-
- sec = xtime.tv_sec;
- usec += (xtime.tv_nsec / 1000);
-
- } while (read_seqretry(&xtime_lock, seq));
-
- while (usec >= 1000000) {
- usec -= 1000000;
- sec++;
- }
-
- tv->tv_sec = sec;
- tv->tv_usec = usec;
-}
-EXPORT_SYMBOL(do_gettimeofday);
-
-int do_settimeofday(struct timespec *tv)
-{
- time_t wtm_sec, sec = tv->tv_sec;
- long wtm_nsec, nsec = tv->tv_nsec;
-
- if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
- return -EINVAL;
-
- write_seqlock_irq(&xtime_lock);
-
- /*
- * This is revolting. We need to set "xtime" correctly. However,
- * the value in this location is the value at the most recent update
- * of wall time. Discover what correction gettimeofday() would have
- * made, and then undo it!
- */
- nsec -= do_gettimeoffset() * NSEC_PER_USEC;
- nsec -= (jiffies - wall_jiffies) * tick_nsec;
-
- wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
- wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
-
- set_normalized_timespec(&xtime, sec, nsec);
- set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
-
- ntp_clear();
- write_sequnlock_irq(&xtime_lock);
- clock_was_set();
- return 0;
-}
-
-EXPORT_SYMBOL(do_settimeofday);
-
-/*
- * Gettimeoffset routines. These routines returns the time duration
- * since last timer interrupt in usecs.
- *
- * If the exact CPU counter frequency is known, use fixed_rate_gettimeoffset.
- * Otherwise use calibrate_gettimeoffset()
- *
- * If the CPU does not have the counter register, you can either supply
- * your own gettimeoffset() routine, or use null_gettimeoffset(), which
- * gives the same resolution as HZ.
- */
-
-static unsigned long null_gettimeoffset(void)
+int null_perf_irq(void)
{
return 0;
}
-
-/* The function pointer to one of the gettimeoffset funcs. */
-unsigned long (*do_gettimeoffset)(void) = null_gettimeoffset;
-
-
-static unsigned long fixed_rate_gettimeoffset(void)
-{
- u32 count;
- unsigned long res;
-
- /* Get last timer tick in absolute kernel time */
- count = mips_hpt_read();
-
- /* .. relative to previous jiffy (32 bits is enough) */
- count -= timerlo;
-
- __asm__("multu %1,%2"
- : "=h" (res)
- : "r" (count), "r" (sll32_usecs_per_cycle)
- : "lo", GCC_REG_ACCUM);
-
- /*
- * Due to possible jiffies inconsistencies, we need to check
- * the result so that we'll get a timer that is monotonic.
- */
- if (res >= USECS_PER_JIFFY)
- res = USECS_PER_JIFFY - 1;
-
- return res;
-}
-
-
-/*
- * Cached "1/(clocks per usec) * 2^32" value.
- * It has to be recalculated once each jiffy.
- */
-static unsigned long cached_quotient;
-
-/* Last jiffy when calibrate_divXX_gettimeoffset() was called. */
-static unsigned long last_jiffies;
-
-/*
- * This is moved from dec/time.c:do_ioasic_gettimeoffset() by Maciej.
- */
-static unsigned long calibrate_div32_gettimeoffset(void)
-{
- u32 count;
- unsigned long res, tmp;
- unsigned long quotient;
-
- tmp = jiffies;
-
- quotient = cached_quotient;
-
- if (last_jiffies != tmp) {
- last_jiffies = tmp;
- if (last_jiffies != 0) {
- unsigned long r0;
- do_div64_32(r0, timerhi, timerlo, tmp);
- do_div64_32(quotient, USECS_PER_JIFFY,
- USECS_PER_JIFFY_FRAC, r0);
- cached_quotient = quotient;
- }
- }
-
- /* Get last timer tick in absolute kernel time */
- count = mips_hpt_read();
-
- /* .. relative to previous jiffy (32 bits is enough) */
- count -= timerlo;
-
- __asm__("multu %1,%2"
- : "=h" (res)
- : "r" (count), "r" (quotient)
- : "lo", GCC_REG_ACCUM);
-
- /*
- * Due to possible jiffies inconsistencies, we need to check
- * the result so that we'll get a timer that is monotonic.
- */
- if (res >= USECS_PER_JIFFY)
- res = USECS_PER_JIFFY - 1;
-
- return res;
-}
-
-static unsigned long calibrate_div64_gettimeoffset(void)
-{
- u32 count;
- unsigned long res, tmp;
- unsigned long quotient;
-
- tmp = jiffies;
-
- quotient = cached_quotient;
-
- if (last_jiffies != tmp) {
- last_jiffies = tmp;
- if (last_jiffies) {
- unsigned long r0;
- __asm__(".set push\n\t"
- ".set mips3\n\t"
- "lwu %0,%3\n\t"
- "dsll32 %1,%2,0\n\t"
- "or %1,%1,%0\n\t"
- "ddivu $0,%1,%4\n\t"
- "mflo %1\n\t"
- "dsll32 %0,%5,0\n\t"
- "or %0,%0,%6\n\t"
- "ddivu $0,%0,%1\n\t"
- "mflo %0\n\t"
- ".set pop"
- : "=&r" (quotient), "=&r" (r0)
- : "r" (timerhi), "m" (timerlo),
- "r" (tmp), "r" (USECS_PER_JIFFY),
- "r" (USECS_PER_JIFFY_FRAC)
- : "hi", "lo", GCC_REG_ACCUM);
- cached_quotient = quotient;
- }
- }
-
- /* Get last timer tick in absolute kernel time */
- count = mips_hpt_read();
-
- /* .. relative to previous jiffy (32 bits is enough) */
- count -= timerlo;
-
- __asm__("multu %1,%2"
- : "=h" (res)
- : "r" (count), "r" (quotient)
- : "lo", GCC_REG_ACCUM);
-
- /*
- * Due to possible jiffies inconsistencies, we need to check
- * the result so that we'll get a timer that is monotonic.
- */
- if (res >= USECS_PER_JIFFY)
- res = USECS_PER_JIFFY - 1;
-
- return res;
-}
-
-
-/* last time when xtime and rtc are sync'ed up */
-static long last_rtc_update;
-
-/*
- * local_timer_interrupt() does profiling and process accounting
- * on a per-CPU basis.
- *
- * In UP mode, it is invoked from the (global) timer_interrupt.
- *
- * In SMP mode, it might invoked by per-CPU timer interrupt, or
- * a broadcasted inter-processor interrupt which itself is triggered
- * by the global timer interrupt.
- */
-void local_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-{
- if (current->pid)
- profile_tick(CPU_PROFILING, regs);
- update_process_times(user_mode(regs));
-}
-
-/*
- * High-level timer interrupt service routines. This function
- * is set as irqaction->handler and is invoked through do_IRQ.
- */
-irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-{
- unsigned long j;
- unsigned int count;
-
- write_seqlock(&xtime_lock);
-
- count = mips_hpt_read();
- mips_timer_ack();
-
- /* Update timerhi/timerlo for intra-jiffy calibration. */
- timerhi += count < timerlo; /* Wrap around */
- timerlo = count;
-
- /*
- * call the generic timer interrupt handling
- */
- do_timer(regs);
-
- /*
- * If we have an externally synchronized Linux clock, then update
- * CMOS clock accordingly every ~11 minutes. rtc_mips_set_time() has to be
- * called as close as possible to 500 ms before the new second starts.
- */
- if (ntp_synced() &&
- xtime.tv_sec > last_rtc_update + 660 &&
- (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
- (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) {
- if (rtc_mips_set_mmss(xtime.tv_sec) == 0) {
- last_rtc_update = xtime.tv_sec;
- } else {
- /* do it again in 60 s */
- last_rtc_update = xtime.tv_sec - 600;
- }
- }
-
- /*
- * If jiffies has overflown in this timer_interrupt, we must
- * update the timer[hi]/[lo] to make fast gettimeoffset funcs
- * quotient calc still valid. -arca
- *
- * The first timer interrupt comes late as interrupts are
- * enabled long after timers are initialized. Therefore the
- * high precision timer is fast, leading to wrong gettimeoffset()
- * calculations. We deal with it by setting it based on the
- * number of its ticks between the second and the third interrupt.
- * That is still somewhat imprecise, but it's a good estimate.
- * --macro
- */
- j = jiffies;
- if (j < 4) {
- static unsigned int prev_count;
- static int hpt_initialized;
-
- switch (j) {
- case 0:
- timerhi = timerlo = 0;
- mips_hpt_init(count);
- break;
- case 2:
- prev_count = count;
- break;
- case 3:
- if (!hpt_initialized) {
- unsigned int c3 = 3 * (count - prev_count);
-
- timerhi = 0;
- timerlo = c3;
- mips_hpt_init(count - c3);
- hpt_initialized = 1;
- }
- break;
- default:
- break;
- }
- }
-
- write_sequnlock(&xtime_lock);
-
- /*
- * In UP mode, we call local_timer_interrupt() to do profiling
- * and process accouting.
- *
- * In SMP mode, local_timer_interrupt() is invoked by appropriate
- * low-level local timer interrupt handler.
- */
- local_timer_interrupt(irq, dev_id, regs);
-
- return IRQ_HANDLED;
-}
-
-int null_perf_irq(struct pt_regs *regs)
-{
- return 0;
-}
-
-int (*perf_irq)(struct pt_regs *regs) = null_perf_irq;
-
EXPORT_SYMBOL(null_perf_irq);
-EXPORT_SYMBOL(perf_irq);
-
-asmlinkage void ll_timer_interrupt(int irq, struct pt_regs *regs)
-{
- int r2 = cpu_has_mips_r2;
-
- irq_enter();
- kstat_this_cpu.irqs[irq]++;
-
- /*
- * Suckage alert:
- * Before R2 of the architecture there was no way to see if a
- * performance counter interrupt was pending, so we have to run the
- * performance counter interrupt handler anyway.
- */
- if (!r2 || (read_c0_cause() & (1 << 26)))
- if (perf_irq(regs))
- goto out;
- /* we keep interrupt disabled all the time */
- if (!r2 || (read_c0_cause() & (1 << 30)))
- timer_interrupt(irq, NULL, regs);
+int (*perf_irq)(void) = null_perf_irq;
-out:
- irq_exit();
-}
-
-asmlinkage void ll_local_timer_interrupt(int irq, struct pt_regs *regs)
-{
- irq_enter();
- if (smp_processor_id() != 0)
- kstat_this_cpu.irqs[irq]++;
-
- /* we keep interrupt disabled all the time */
- local_timer_interrupt(irq, NULL, regs);
-
- irq_exit();
-}
+EXPORT_SYMBOL(perf_irq);
/*
* time_init() - it does the following things.
*
- * 1) board_time_init() -
+ * 1) plat_time_init() -
* a) (optional) set up RTC routines,
* b) (optional) calibrate and set the mips_hpt_frequency
- * (only needed if you intended to use fixed_rate_gettimeoffset
- * or use cpu counter as timer interrupt source)
- * 2) setup xtime based on rtc_mips_get_time().
- * 3) choose a appropriate gettimeoffset routine.
- * 4) calculate a couple of cached variables for later usage
- * 5) board_timer_setup() -
- * a) (optional) over-write any choices made above by time_init().
- * b) machine specific code should setup the timer irqaction.
- * c) enable the timer interrupt
+ * (only needed if you intended to use cpu counter as timer interrupt
+ * source)
+ * 2) calculate a couple of cached variables for later usage
*/
-void (*board_time_init)(void);
-void (*board_timer_setup)(struct irqaction *irq);
-
unsigned int mips_hpt_frequency;
-static struct irqaction timer_irqaction = {
- .handler = timer_interrupt,
- .flags = SA_INTERRUPT,
- .name = "timer",
+static struct clocksource clocksource_mips = {
+ .name = "MIPS",
+ .read = c0_hpt_read,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
static unsigned int __init calibrate_hpt(void)
{
- u64 frequency;
- u32 hpt_start, hpt_end, hpt_count, hz;
+ cycle_t frequency, hpt_start, hpt_end, hpt_count, hz;
const int loops = HZ / 10;
int log_2_loops = 0;
* during the calculated number of periods between timer
* interrupts.
*/
- hpt_start = mips_hpt_read();
+ hpt_start = clocksource_mips.read();
do {
while (mips_timer_state());
while (!mips_timer_state());
} while (--i);
- hpt_end = mips_hpt_read();
+ hpt_end = clocksource_mips.read();
- hpt_count = hpt_end - hpt_start;
+ hpt_count = (hpt_end - hpt_start) & clocksource_mips.mask;
hz = HZ;
- frequency = (u64)hpt_count * (u64)hz;
+ frequency = hpt_count * hz;
return frequency >> log_2_loops;
}
-void __init time_init(void)
+void __init clocksource_set_clock(struct clocksource *cs, unsigned int clock)
{
- if (board_time_init)
- board_time_init();
-
- if (!rtc_mips_set_mmss)
- rtc_mips_set_mmss = rtc_mips_set_time;
-
- xtime.tv_sec = rtc_mips_get_time();
- xtime.tv_nsec = 0;
-
- set_normalized_timespec(&wall_to_monotonic,
- -xtime.tv_sec, -xtime.tv_nsec);
-
- /* Choose appropriate high precision timer routines. */
- if (!cpu_has_counter && !mips_hpt_read) {
- /* No high precision timer -- sorry. */
- mips_hpt_read = null_hpt_read;
- mips_hpt_init = null_hpt_init;
- } else if (!mips_hpt_frequency && !mips_timer_state) {
- /* A high precision timer of unknown frequency. */
- if (!mips_hpt_read) {
- /* No external high precision timer -- use R4k. */
- mips_hpt_read = c0_hpt_read;
- mips_hpt_init = c0_hpt_init;
- }
-
- if (cpu_has_mips32r1 || cpu_has_mips32r2 ||
- (current_cpu_data.isa_level == MIPS_CPU_ISA_I) ||
- (current_cpu_data.isa_level == MIPS_CPU_ISA_II))
- /*
- * We need to calibrate the counter but we don't have
- * 64-bit division.
- */
- do_gettimeoffset = calibrate_div32_gettimeoffset;
- else
- /*
- * We need to calibrate the counter but we *do* have
- * 64-bit division.
- */
- do_gettimeoffset = calibrate_div64_gettimeoffset;
- } else {
- /* We know counter frequency. Or we can get it. */
- if (!mips_hpt_read) {
- /* No external high precision timer -- use R4k. */
- mips_hpt_read = c0_hpt_read;
-
- if (mips_timer_state)
- mips_hpt_init = c0_hpt_init;
- else {
- /* No external timer interrupt -- use R4k. */
- mips_hpt_init = c0_hpt_timer_init;
- mips_timer_ack = c0_timer_ack;
- }
- }
- if (!mips_hpt_frequency)
- mips_hpt_frequency = calibrate_hpt();
-
- do_gettimeoffset = fixed_rate_gettimeoffset;
-
- /* Calculate cache parameters. */
- cycles_per_jiffy = (mips_hpt_frequency + HZ / 2) / HZ;
+ u64 temp;
+ u32 shift;
- /* sll32_usecs_per_cycle = 10^6 * 2^32 / mips_counter_freq */
- do_div64_32(sll32_usecs_per_cycle,
- 1000000, mips_hpt_frequency / 2,
- mips_hpt_frequency);
-
- /* Report the high precision timer rate for a reference. */
- printk("Using %u.%03u MHz high precision timer.\n",
- ((mips_hpt_frequency + 500) / 1000) / 1000,
- ((mips_hpt_frequency + 500) / 1000) % 1000);
+ /* Find a shift value */
+ for (shift = 32; shift > 0; shift--) {
+ temp = (u64) NSEC_PER_SEC << shift;
+ do_div(temp, clock);
+ if ((temp >> 32) == 0)
+ break;
}
-
- if (!mips_timer_ack)
- /* No timer interrupt ack (e.g. i8254). */
- mips_timer_ack = null_timer_ack;
-
- /* This sets up the high precision timer for the first interrupt. */
- mips_hpt_init(mips_hpt_read());
-
- /*
- * Call board specific timer interrupt setup.
- *
- * this pointer must be setup in machine setup routine.
- *
- * Even if a machine chooses to use a low-level timer interrupt,
- * it still needs to setup the timer_irqaction.
- * In that case, it might be better to set timer_irqaction.handler
- * to be NULL function so that we are sure the high-level code
- * is not invoked accidentally.
- */
- board_timer_setup(&timer_irqaction);
+ cs->shift = shift;
+ cs->mult = (u32) temp;
}
-#define FEBRUARY 2
-#define STARTOFTIME 1970
-#define SECDAY 86400L
-#define SECYR (SECDAY * 365)
-#define leapyear(y) ((!((y) % 4) && ((y) % 100)) || !((y) % 400))
-#define days_in_year(y) (leapyear(y) ? 366 : 365)
-#define days_in_month(m) (month_days[(m) - 1])
+void __cpuinit clockevent_set_clock(struct clock_event_device *cd,
+ unsigned int clock)
+{
+ u64 temp;
+ u32 shift;
-static int month_days[12] = {
- 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31
-};
+ /* Find a shift value */
+ for (shift = 32; shift > 0; shift--) {
+ temp = (u64) clock << shift;
+ do_div(temp, NSEC_PER_SEC);
+ if ((temp >> 32) == 0)
+ break;
+ }
+ cd->shift = shift;
+ cd->mult = (u32) temp;
+}
-void to_tm(unsigned long tim, struct rtc_time *tm)
+static void __init init_mips_clocksource(void)
{
- long hms, day, gday;
- int i;
+ /* Calclate a somewhat reasonable rating value */
+ clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000;
- gday = day = tim / SECDAY;
- hms = tim % SECDAY;
+ clocksource_set_clock(&clocksource_mips, mips_hpt_frequency);
- /* Hours, minutes, seconds are easy */
- tm->tm_hour = hms / 3600;
- tm->tm_min = (hms % 3600) / 60;
- tm->tm_sec = (hms % 3600) % 60;
+ clocksource_register(&clocksource_mips);
+}
- /* Number of years in days */
- for (i = STARTOFTIME; day >= days_in_year(i); i++)
- day -= days_in_year(i);
- tm->tm_year = i;
+void __init __weak plat_time_init(void)
+{
+}
- /* Number of months in days left */
- if (leapyear(tm->tm_year))
- days_in_month(FEBRUARY) = 29;
- for (i = 1; day >= days_in_month(i); i++)
- day -= days_in_month(i);
- days_in_month(FEBRUARY) = 28;
- tm->tm_mon = i - 1; /* tm_mon starts from 0 to 11 */
+/*
+ * This function exists in order to cause an error due to a duplicate
+ * definition if platform code should have its own implementation. The hook
+ * to use instead is plat_time_init. plat_time_init does not receive the
+ * irqaction pointer argument anymore. This is because any function which
+ * initializes an interrupt timer now takes care of its own request_irq rsp.
+ * setup_irq calls and each clock_event_device should use its own
+ * struct irqrequest.
+ */
+void __init plat_timer_setup(void)
+{
+ BUG();
+}
- /* Days are what is left over (+1) from all that. */
- tm->tm_mday = day + 1;
+void __init time_init(void)
+{
+ plat_time_init();
- /*
- * Determine the day of week
- */
- tm->tm_wday = (gday + 4) % 7; /* 1970/1/1 was Thursday */
-}
+ if (cpu_has_counter && (mips_hpt_frequency || mips_timer_state)) {
+ /* We know counter frequency. Or we can get it. */
+ if (!mips_hpt_frequency)
+ mips_hpt_frequency = calibrate_hpt();
-EXPORT_SYMBOL(rtc_lock);
-EXPORT_SYMBOL(to_tm);
-EXPORT_SYMBOL(rtc_mips_set_time);
-EXPORT_SYMBOL(rtc_mips_get_time);
+ /* Report the high precision timer rate for a reference. */
+ printk("Using %u.%03u MHz high precision timer.\n",
+ ((mips_hpt_frequency + 500) / 1000) / 1000,
+ ((mips_hpt_frequency + 500) / 1000) % 1000);
+ init_mips_clocksource();
+ }
-unsigned long long sched_clock(void)
-{
- return (unsigned long long)jiffies*(1000000000/HZ);
+ mips_clockevent_init();
}