* Processor capabilities determination functions.
*
* Copyright (C) xxxx the Anonymous
+ * Copyright (C) 1994 - 2006 Ralf Baechle
* Copyright (C) 2003, 2004 Maciej W. Rozycki
- * Copyright (C) 1994 - 2003 Ralf Baechle
* Copyright (C) 2001, 2004 MIPS Inc.
*
* This program is free software; you can redistribute it and/or
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
-#include <linux/config.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/ptrace.h>
#include <linux/stddef.h>
+#include <asm/bugs.h>
#include <asm/cpu.h>
#include <asm/fpu.h>
#include <asm/mipsregs.h>
#include <asm/system.h>
+#include <asm/watch.h>
/*
* Not all of the MIPS CPUs have the "wait" instruction available. Moreover,
static void r39xx_wait(void)
{
- unsigned long cfg = read_c0_conf();
- write_c0_conf(cfg | TX39_CONF_HALT);
+ local_irq_disable();
+ if (!need_resched())
+ write_c0_conf(read_c0_conf() | TX39_CONF_HALT);
+ local_irq_enable();
}
-static void r4k_wait(void)
+extern void r4k_wait(void);
+
+/*
+ * This variant is preferable as it allows testing need_resched and going to
+ * sleep depending on the outcome atomically. Unfortunately the "It is
+ * implementation-dependent whether the pipeline restarts when a non-enabled
+ * interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes
+ * using this version a gamble.
+ */
+void r4k_wait_irqoff(void)
+{
+ local_irq_disable();
+ if (!need_resched())
+ __asm__(" .set push \n"
+ " .set mips3 \n"
+ " wait \n"
+ " .set pop \n");
+ local_irq_enable();
+ __asm__(" .globl __pastwait \n"
+ "__pastwait: \n");
+ return;
+}
+
+/*
+ * The RM7000 variant has to handle erratum 38. The workaround is to not
+ * have any pending stores when the WAIT instruction is executed.
+ */
+static void rm7k_wait_irqoff(void)
{
- __asm__(".set\tmips3\n\t"
- "wait\n\t"
- ".set\tmips0");
+ local_irq_disable();
+ if (!need_resched())
+ __asm__(
+ " .set push \n"
+ " .set mips3 \n"
+ " .set noat \n"
+ " mfc0 $1, $12 \n"
+ " sync \n"
+ " mtc0 $1, $12 # stalls until W stage \n"
+ " wait \n"
+ " mtc0 $1, $12 # stalls until W stage \n"
+ " .set pop \n");
+ local_irq_enable();
}
/* The Au1xxx wait is available only if using 32khz counter or
static void au1k_wait(void)
{
+ if (!allow_au1k_wait)
+ return;
+
/* using the wait instruction makes CP0 counter unusable */
- __asm__(".set mips3\n\t"
- "cache 0x14, 0(%0)\n\t"
- "cache 0x14, 32(%0)\n\t"
- "sync\n\t"
- "nop\n\t"
- "wait\n\t"
- "nop\n\t"
- "nop\n\t"
- "nop\n\t"
- "nop\n\t"
- ".set mips0\n\t"
+ __asm__(" .set mips3 \n"
+ " cache 0x14, 0(%0) \n"
+ " cache 0x14, 32(%0) \n"
+ " sync \n"
+ " nop \n"
+ " wait \n"
+ " nop \n"
+ " nop \n"
+ " nop \n"
+ " nop \n"
+ " .set mips0 \n"
: : "r" (au1k_wait));
}
static int __initdata nowait = 0;
-int __init wait_disable(char *s)
+static int __init wait_disable(char *s)
{
nowait = 1;
__setup("nowait", wait_disable);
-static inline void check_wait(void)
+void __init check_wait(void)
{
struct cpuinfo_mips *c = ¤t_cpu_data;
- printk("Checking for 'wait' instruction... ");
if (nowait) {
- printk (" disabled.\n");
+ printk("Wait instruction disabled.\n");
return;
}
case CPU_R3081:
case CPU_R3081E:
cpu_wait = r3081_wait;
- printk(" available.\n");
break;
case CPU_TX3927:
cpu_wait = r39xx_wait;
- printk(" available.\n");
break;
case CPU_R4200:
/* case CPU_R4300: */
case CPU_R4650:
case CPU_R4700:
case CPU_R5000:
+ case CPU_R5500:
case CPU_NEVADA:
- case CPU_RM7000:
- case CPU_RM9000:
- case CPU_TX49XX:
case CPU_4KC:
case CPU_4KEC:
case CPU_4KSC:
case CPU_5KC:
-/* case CPU_20KC:*/
- case CPU_24K:
case CPU_25KF:
+ case CPU_PR4450:
+ case CPU_BCM3302:
+ case CPU_CAVIUM_OCTEON:
+ cpu_wait = r4k_wait;
+ break;
+
+ case CPU_RM7000:
+ cpu_wait = rm7k_wait_irqoff;
+ break;
+
+ case CPU_24K:
case CPU_34K:
+ case CPU_1004K:
cpu_wait = r4k_wait;
- printk(" available.\n");
- break;
- case CPU_AU1000:
- case CPU_AU1100:
- case CPU_AU1500:
- case CPU_AU1550:
- case CPU_AU1200:
- if (allow_au1k_wait) {
- cpu_wait = au1k_wait;
- printk(" available.\n");
- } else
- printk(" unavailable.\n");
+ if (read_c0_config7() & MIPS_CONF7_WII)
+ cpu_wait = r4k_wait_irqoff;
+ break;
+
+ case CPU_74K:
+ cpu_wait = r4k_wait;
+ if ((c->processor_id & 0xff) >= PRID_REV_ENCODE_332(2, 1, 0))
+ cpu_wait = r4k_wait_irqoff;
+ break;
+
+ case CPU_TX49XX:
+ cpu_wait = r4k_wait_irqoff;
+ break;
+ case CPU_ALCHEMY:
+ cpu_wait = au1k_wait;
+ break;
+ case CPU_20KC:
+ /*
+ * WAIT on Rev1.0 has E1, E2, E3 and E16.
+ * WAIT on Rev2.0 and Rev3.0 has E16.
+ * Rev3.1 WAIT is nop, why bother
+ */
+ if ((c->processor_id & 0xff) <= 0x64)
+ break;
+
+ /*
+ * Another rev is incremeting c0_count at a reduced clock
+ * rate while in WAIT mode. So we basically have the choice
+ * between using the cp0 timer as clocksource or avoiding
+ * the WAIT instruction. Until more details are known,
+ * disable the use of WAIT for 20Kc entirely.
+ cpu_wait = r4k_wait;
+ */
+ break;
+ case CPU_RM9000:
+ if ((c->processor_id & 0x00ff) >= 0x40)
+ cpu_wait = r4k_wait;
+ break;
+ default:
+ break;
+ }
+}
+
+static inline void check_errata(void)
+{
+ struct cpuinfo_mips *c = ¤t_cpu_data;
+
+ switch (c->cputype) {
+ case CPU_34K:
+ /*
+ * Erratum "RPS May Cause Incorrect Instruction Execution"
+ * This code only handles VPE0, any SMP/SMTC/RTOS code
+ * making use of VPE1 will be responsable for that VPE.
+ */
+ if ((c->processor_id & PRID_REV_MASK) <= PRID_REV_34K_V1_0_2)
+ write_c0_config7(read_c0_config7() | MIPS_CONF7_RPS);
break;
default:
- printk(" unavailable.\n");
break;
}
}
void __init check_bugs32(void)
{
- check_wait();
+ check_errata();
}
/*
return ((cpu_get_fpu_id() & 0xff00) != FPIR_IMP_NONE);
}
-#define R4K_OPTS (MIPS_CPU_TLB | MIPS_CPU_4KEX | MIPS_CPU_4KTLB \
+#define R4K_OPTS (MIPS_CPU_TLB | MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE \
| MIPS_CPU_COUNTER)
-static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
+static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
{
switch (c->processor_id & 0xff00) {
case PRID_IMP_R2000:
c->cputype = CPU_R2000;
+ __cpu_name[cpu] = "R2000";
c->isa_level = MIPS_CPU_ISA_I;
- c->options = MIPS_CPU_TLB | MIPS_CPU_NOFPUEX;
+ c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE |
+ MIPS_CPU_NOFPUEX;
if (__cpu_has_fpu())
c->options |= MIPS_CPU_FPU;
c->tlbsize = 64;
break;
case PRID_IMP_R3000:
- if ((c->processor_id & 0xff) == PRID_REV_R3000A)
- if (cpu_has_confreg())
+ if ((c->processor_id & 0xff) == PRID_REV_R3000A) {
+ if (cpu_has_confreg()) {
c->cputype = CPU_R3081E;
- else
+ __cpu_name[cpu] = "R3081";
+ } else {
c->cputype = CPU_R3000A;
- else
+ __cpu_name[cpu] = "R3000A";
+ }
+ break;
+ } else {
c->cputype = CPU_R3000;
+ __cpu_name[cpu] = "R3000";
+ }
c->isa_level = MIPS_CPU_ISA_I;
- c->options = MIPS_CPU_TLB | MIPS_CPU_NOFPUEX;
+ c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE |
+ MIPS_CPU_NOFPUEX;
if (__cpu_has_fpu())
c->options |= MIPS_CPU_FPU;
c->tlbsize = 64;
break;
case PRID_IMP_R4000:
if (read_c0_config() & CONF_SC) {
- if ((c->processor_id & 0xff) >= PRID_REV_R4400)
+ if ((c->processor_id & 0xff) >= PRID_REV_R4400) {
c->cputype = CPU_R4400PC;
- else
+ __cpu_name[cpu] = "R4400PC";
+ } else {
c->cputype = CPU_R4000PC;
+ __cpu_name[cpu] = "R4000PC";
+ }
} else {
- if ((c->processor_id & 0xff) >= PRID_REV_R4400)
+ if ((c->processor_id & 0xff) >= PRID_REV_R4400) {
c->cputype = CPU_R4400SC;
- else
+ __cpu_name[cpu] = "R4400SC";
+ } else {
c->cputype = CPU_R4000SC;
+ __cpu_name[cpu] = "R4000SC";
+ }
}
c->isa_level = MIPS_CPU_ISA_III;
switch (c->processor_id & 0xf0) {
case PRID_REV_VR4111:
c->cputype = CPU_VR4111;
+ __cpu_name[cpu] = "NEC VR4111";
break;
case PRID_REV_VR4121:
c->cputype = CPU_VR4121;
+ __cpu_name[cpu] = "NEC VR4121";
break;
case PRID_REV_VR4122:
- if ((c->processor_id & 0xf) < 0x3)
+ if ((c->processor_id & 0xf) < 0x3) {
c->cputype = CPU_VR4122;
- else
+ __cpu_name[cpu] = "NEC VR4122";
+ } else {
c->cputype = CPU_VR4181A;
+ __cpu_name[cpu] = "NEC VR4181A";
+ }
break;
case PRID_REV_VR4130:
- if ((c->processor_id & 0xf) < 0x4)
+ if ((c->processor_id & 0xf) < 0x4) {
c->cputype = CPU_VR4131;
- else
+ __cpu_name[cpu] = "NEC VR4131";
+ } else {
c->cputype = CPU_VR4133;
+ __cpu_name[cpu] = "NEC VR4133";
+ }
break;
default:
printk(KERN_INFO "Unexpected CPU of NEC VR4100 series\n");
c->cputype = CPU_VR41XX;
+ __cpu_name[cpu] = "NEC Vr41xx";
break;
}
c->isa_level = MIPS_CPU_ISA_III;
break;
case PRID_IMP_R4300:
c->cputype = CPU_R4300;
+ __cpu_name[cpu] = "R4300";
c->isa_level = MIPS_CPU_ISA_III;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_LLSC;
break;
case PRID_IMP_R4600:
c->cputype = CPU_R4600;
+ __cpu_name[cpu] = "R4600";
c->isa_level = MIPS_CPU_ISA_III;
- c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_LLSC;
+ c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
+ MIPS_CPU_LLSC;
c->tlbsize = 48;
break;
#if 0
* for documentation. Commented out because it shares
* it's c0_prid id number with the TX3900.
*/
- c->cputype = CPU_R4650;
+ c->cputype = CPU_R4650;
+ __cpu_name[cpu] = "R4650";
c->isa_level = MIPS_CPU_ISA_III;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_LLSC;
c->tlbsize = 48;
#endif
case PRID_IMP_TX39:
c->isa_level = MIPS_CPU_ISA_I;
- c->options = MIPS_CPU_TLB;
+ c->options = MIPS_CPU_TLB | MIPS_CPU_TX39_CACHE;
if ((c->processor_id & 0xf0) == (PRID_REV_TX3927 & 0xf0)) {
c->cputype = CPU_TX3927;
+ __cpu_name[cpu] = "TX3927";
c->tlbsize = 64;
} else {
switch (c->processor_id & 0xff) {
case PRID_REV_TX3912:
c->cputype = CPU_TX3912;
+ __cpu_name[cpu] = "TX3912";
c->tlbsize = 32;
break;
case PRID_REV_TX3922:
c->cputype = CPU_TX3922;
+ __cpu_name[cpu] = "TX3922";
c->tlbsize = 64;
break;
- default:
- c->cputype = CPU_UNKNOWN;
- break;
}
}
break;
case PRID_IMP_R4700:
c->cputype = CPU_R4700;
+ __cpu_name[cpu] = "R4700";
c->isa_level = MIPS_CPU_ISA_III;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_LLSC;
break;
case PRID_IMP_TX49:
c->cputype = CPU_TX49XX;
+ __cpu_name[cpu] = "R49XX";
c->isa_level = MIPS_CPU_ISA_III;
c->options = R4K_OPTS | MIPS_CPU_LLSC;
if (!(c->processor_id & 0x08))
break;
case PRID_IMP_R5000:
c->cputype = CPU_R5000;
+ __cpu_name[cpu] = "R5000";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_LLSC;
break;
case PRID_IMP_R5432:
c->cputype = CPU_R5432;
+ __cpu_name[cpu] = "R5432";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_WATCH | MIPS_CPU_LLSC;
break;
case PRID_IMP_R5500:
c->cputype = CPU_R5500;
+ __cpu_name[cpu] = "R5500";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_WATCH | MIPS_CPU_LLSC;
break;
case PRID_IMP_NEVADA:
c->cputype = CPU_NEVADA;
+ __cpu_name[cpu] = "Nevada";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_DIVEC | MIPS_CPU_LLSC;
break;
case PRID_IMP_R6000:
c->cputype = CPU_R6000;
+ __cpu_name[cpu] = "R6000";
c->isa_level = MIPS_CPU_ISA_II;
c->options = MIPS_CPU_TLB | MIPS_CPU_FPU |
MIPS_CPU_LLSC;
break;
case PRID_IMP_R6000A:
c->cputype = CPU_R6000A;
+ __cpu_name[cpu] = "R6000A";
c->isa_level = MIPS_CPU_ISA_II;
c->options = MIPS_CPU_TLB | MIPS_CPU_FPU |
MIPS_CPU_LLSC;
break;
case PRID_IMP_RM7000:
c->cputype = CPU_RM7000;
+ __cpu_name[cpu] = "RM7000";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_LLSC;
break;
case PRID_IMP_RM9000:
c->cputype = CPU_RM9000;
+ __cpu_name[cpu] = "RM9000";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_LLSC;
break;
case PRID_IMP_R8000:
c->cputype = CPU_R8000;
+ __cpu_name[cpu] = "RM8000";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
MIPS_CPU_FPU | MIPS_CPU_32FPR |
break;
case PRID_IMP_R10000:
c->cputype = CPU_R10000;
+ __cpu_name[cpu] = "R10000";
c->isa_level = MIPS_CPU_ISA_IV;
- c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
+ c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
MIPS_CPU_LLSC;
break;
case PRID_IMP_R12000:
c->cputype = CPU_R12000;
+ __cpu_name[cpu] = "R12000";
c->isa_level = MIPS_CPU_ISA_IV;
- c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
+ c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
+ MIPS_CPU_FPU | MIPS_CPU_32FPR |
+ MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
+ MIPS_CPU_LLSC;
+ c->tlbsize = 64;
+ break;
+ case PRID_IMP_R14000:
+ c->cputype = CPU_R14000;
+ __cpu_name[cpu] = "R14000";
+ c->isa_level = MIPS_CPU_ISA_IV;
+ c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
MIPS_CPU_LLSC;
c->tlbsize = 64;
break;
+ case PRID_IMP_LOONGSON2:
+ c->cputype = CPU_LOONGSON2;
+ __cpu_name[cpu] = "ICT Loongson-2";
+ c->isa_level = MIPS_CPU_ISA_III;
+ c->options = R4K_OPTS |
+ MIPS_CPU_FPU | MIPS_CPU_LLSC |
+ MIPS_CPU_32FPR;
+ c->tlbsize = 64;
+ break;
}
}
+static char unknown_isa[] __cpuinitdata = KERN_ERR \
+ "Unsupported ISA type, c0.config0: %d.";
+
static inline unsigned int decode_config0(struct cpuinfo_mips *c)
{
unsigned int config0;
config0 = read_c0_config();
if (((config0 & MIPS_CONF_MT) >> 7) == 1)
- c->options |= MIPS_CPU_TLB | MIPS_CPU_4KTLB;
+ c->options |= MIPS_CPU_TLB;
isa = (config0 & MIPS_CONF_AT) >> 13;
switch (isa) {
case 0:
- c->isa_level = MIPS_CPU_ISA_M32;
+ switch ((config0 & MIPS_CONF_AR) >> 10) {
+ case 0:
+ c->isa_level = MIPS_CPU_ISA_M32R1;
+ break;
+ case 1:
+ c->isa_level = MIPS_CPU_ISA_M32R2;
+ break;
+ default:
+ goto unknown;
+ }
break;
case 2:
- c->isa_level = MIPS_CPU_ISA_M64;
+ switch ((config0 & MIPS_CONF_AR) >> 10) {
+ case 0:
+ c->isa_level = MIPS_CPU_ISA_M64R1;
+ break;
+ case 1:
+ c->isa_level = MIPS_CPU_ISA_M64R2;
+ break;
+ default:
+ goto unknown;
+ }
break;
default:
- panic("Unsupported ISA type, cp0.config0.at: %d.", isa);
+ goto unknown;
}
return config0 & MIPS_CONF_M;
+
+unknown:
+ panic(unknown_isa, config0);
}
static inline unsigned int decode_config1(struct cpuinfo_mips *c)
if (config3 & MIPS_CONF3_VEIC)
c->options |= MIPS_CPU_VEIC;
if (config3 & MIPS_CONF3_MT)
- c->ases |= MIPS_ASE_MIPSMT;
+ c->ases |= MIPS_ASE_MIPSMT;
+ if (config3 & MIPS_CONF3_ULRI)
+ c->options |= MIPS_CPU_ULRI;
return config3 & MIPS_CONF_M;
}
-static inline void decode_configs(struct cpuinfo_mips *c)
+static void __cpuinit decode_configs(struct cpuinfo_mips *c)
{
+ int ok;
+
/* MIPS32 or MIPS64 compliant CPU. */
- c->options = MIPS_CPU_4KEX | MIPS_CPU_COUNTER | MIPS_CPU_DIVEC |
- MIPS_CPU_LLSC | MIPS_CPU_MCHECK;
+ c->options = MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE | MIPS_CPU_COUNTER |
+ MIPS_CPU_DIVEC | MIPS_CPU_LLSC | MIPS_CPU_MCHECK;
c->scache.flags = MIPS_CACHE_NOT_PRESENT;
- /* Read Config registers. */
- if (!decode_config0(c))
- return; /* actually worth a panic() */
- if (!decode_config1(c))
- return;
- if (!decode_config2(c))
- return;
- if (!decode_config3(c))
- return;
+ ok = decode_config0(c); /* Read Config registers. */
+ BUG_ON(!ok); /* Arch spec violation! */
+ if (ok)
+ ok = decode_config1(c);
+ if (ok)
+ ok = decode_config2(c);
+ if (ok)
+ ok = decode_config3(c);
+
+ mips_probe_watch_registers(c);
}
-static inline void cpu_probe_mips(struct cpuinfo_mips *c)
+#ifdef CONFIG_CPU_MIPSR2
+extern void spram_config(void);
+#else
+static inline void spram_config(void) {}
+#endif
+
+static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu)
{
decode_configs(c);
switch (c->processor_id & 0xff00) {
case PRID_IMP_4KC:
c->cputype = CPU_4KC;
+ __cpu_name[cpu] = "MIPS 4Kc";
break;
case PRID_IMP_4KEC:
c->cputype = CPU_4KEC;
+ __cpu_name[cpu] = "MIPS 4KEc";
break;
case PRID_IMP_4KECR2:
c->cputype = CPU_4KEC;
+ __cpu_name[cpu] = "MIPS 4KEc";
break;
case PRID_IMP_4KSC:
+ case PRID_IMP_4KSD:
c->cputype = CPU_4KSC;
+ __cpu_name[cpu] = "MIPS 4KSc";
break;
case PRID_IMP_5KC:
c->cputype = CPU_5KC;
+ __cpu_name[cpu] = "MIPS 5Kc";
break;
case PRID_IMP_20KC:
c->cputype = CPU_20KC;
+ __cpu_name[cpu] = "MIPS 20Kc";
break;
case PRID_IMP_24K:
case PRID_IMP_24KE:
c->cputype = CPU_24K;
+ __cpu_name[cpu] = "MIPS 24Kc";
break;
case PRID_IMP_25KF:
c->cputype = CPU_25KF;
- /* Probe for L2 cache */
- c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT;
+ __cpu_name[cpu] = "MIPS 25Kc";
break;
case PRID_IMP_34K:
c->cputype = CPU_34K;
- c->isa_level = MIPS_CPU_ISA_M32;
+ __cpu_name[cpu] = "MIPS 34Kc";
+ break;
+ case PRID_IMP_74K:
+ c->cputype = CPU_74K;
+ __cpu_name[cpu] = "MIPS 74Kc";
+ break;
+ case PRID_IMP_1004K:
+ c->cputype = CPU_1004K;
+ __cpu_name[cpu] = "MIPS 1004Kc";
break;
}
+
+ spram_config();
}
-static inline void cpu_probe_alchemy(struct cpuinfo_mips *c)
+static inline void cpu_probe_alchemy(struct cpuinfo_mips *c, unsigned int cpu)
{
decode_configs(c);
switch (c->processor_id & 0xff00) {
case PRID_IMP_AU1_REV1:
case PRID_IMP_AU1_REV2:
+ c->cputype = CPU_ALCHEMY;
switch ((c->processor_id >> 24) & 0xff) {
case 0:
- c->cputype = CPU_AU1000;
+ __cpu_name[cpu] = "Au1000";
break;
case 1:
- c->cputype = CPU_AU1500;
+ __cpu_name[cpu] = "Au1500";
break;
case 2:
- c->cputype = CPU_AU1100;
+ __cpu_name[cpu] = "Au1100";
break;
case 3:
- c->cputype = CPU_AU1550;
+ __cpu_name[cpu] = "Au1550";
break;
case 4:
- c->cputype = CPU_AU1200;
+ __cpu_name[cpu] = "Au1200";
+ if ((c->processor_id & 0xff) == 2)
+ __cpu_name[cpu] = "Au1250";
+ break;
+ case 5:
+ __cpu_name[cpu] = "Au1210";
break;
default:
- panic("Unknown Au Core!");
+ __cpu_name[cpu] = "Au1xxx";
break;
}
break;
}
}
-static inline void cpu_probe_sibyte(struct cpuinfo_mips *c)
+static inline void cpu_probe_sibyte(struct cpuinfo_mips *c, unsigned int cpu)
{
decode_configs(c);
+
switch (c->processor_id & 0xff00) {
case PRID_IMP_SB1:
c->cputype = CPU_SB1;
-#ifdef CONFIG_SB1_PASS_1_WORKAROUNDS
+ __cpu_name[cpu] = "SiByte SB1";
/* FPU in pass1 is known to have issues. */
- c->options &= ~(MIPS_CPU_FPU | MIPS_CPU_32FPR);
-#endif
+ if ((c->processor_id & 0xff) < 0x02)
+ c->options &= ~(MIPS_CPU_FPU | MIPS_CPU_32FPR);
+ break;
+ case PRID_IMP_SB1A:
+ c->cputype = CPU_SB1A;
+ __cpu_name[cpu] = "SiByte SB1A";
break;
}
}
-static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c)
+static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c, unsigned int cpu)
{
decode_configs(c);
switch (c->processor_id & 0xff00) {
case PRID_IMP_SR71000:
c->cputype = CPU_SR71000;
+ __cpu_name[cpu] = "Sandcraft SR71000";
c->scache.ways = 8;
c->tlbsize = 64;
break;
}
}
-__init void cpu_probe(void)
+static inline void cpu_probe_nxp(struct cpuinfo_mips *c, unsigned int cpu)
+{
+ decode_configs(c);
+ switch (c->processor_id & 0xff00) {
+ case PRID_IMP_PR4450:
+ c->cputype = CPU_PR4450;
+ __cpu_name[cpu] = "Philips PR4450";
+ c->isa_level = MIPS_CPU_ISA_M32R1;
+ break;
+ }
+}
+
+static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
+{
+ decode_configs(c);
+ switch (c->processor_id & 0xff00) {
+ case PRID_IMP_BCM3302:
+ c->cputype = CPU_BCM3302;
+ __cpu_name[cpu] = "Broadcom BCM3302";
+ break;
+ case PRID_IMP_BCM4710:
+ c->cputype = CPU_BCM4710;
+ __cpu_name[cpu] = "Broadcom BCM4710";
+ break;
+ }
+}
+
+static inline void cpu_probe_cavium(struct cpuinfo_mips *c, unsigned int cpu)
+{
+ decode_configs(c);
+ switch (c->processor_id & 0xff00) {
+ case PRID_IMP_CAVIUM_CN38XX:
+ case PRID_IMP_CAVIUM_CN31XX:
+ case PRID_IMP_CAVIUM_CN30XX:
+ case PRID_IMP_CAVIUM_CN58XX:
+ case PRID_IMP_CAVIUM_CN56XX:
+ case PRID_IMP_CAVIUM_CN50XX:
+ case PRID_IMP_CAVIUM_CN52XX:
+ c->cputype = CPU_CAVIUM_OCTEON;
+ __cpu_name[cpu] = "Cavium Octeon";
+ break;
+ default:
+ printk(KERN_INFO "Unknown Octeon chip!\n");
+ c->cputype = CPU_UNKNOWN;
+ break;
+ }
+}
+
+const char *__cpu_name[NR_CPUS];
+
+__cpuinit void cpu_probe(void)
{
struct cpuinfo_mips *c = ¤t_cpu_data;
+ unsigned int cpu = smp_processor_id();
c->processor_id = PRID_IMP_UNKNOWN;
c->fpu_id = FPIR_IMP_NONE;
c->processor_id = read_c0_prid();
switch (c->processor_id & 0xff0000) {
case PRID_COMP_LEGACY:
- cpu_probe_legacy(c);
+ cpu_probe_legacy(c, cpu);
break;
case PRID_COMP_MIPS:
- cpu_probe_mips(c);
+ cpu_probe_mips(c, cpu);
break;
case PRID_COMP_ALCHEMY:
- cpu_probe_alchemy(c);
+ cpu_probe_alchemy(c, cpu);
break;
case PRID_COMP_SIBYTE:
- cpu_probe_sibyte(c);
+ cpu_probe_sibyte(c, cpu);
+ break;
+ case PRID_COMP_BROADCOM:
+ cpu_probe_broadcom(c, cpu);
break;
case PRID_COMP_SANDCRAFT:
- cpu_probe_sandcraft(c);
+ cpu_probe_sandcraft(c, cpu);
+ break;
+ case PRID_COMP_NXP:
+ cpu_probe_nxp(c, cpu);
+ break;
+ case PRID_COMP_CAVIUM:
+ cpu_probe_cavium(c, cpu);
break;
- default:
- c->cputype = CPU_UNKNOWN;
}
+
+ BUG_ON(!__cpu_name[cpu]);
+ BUG_ON(c->cputype == CPU_UNKNOWN);
+
+ /*
+ * Platform code can force the cpu type to optimize code
+ * generation. In that case be sure the cpu type is correctly
+ * manually setup otherwise it could trigger some nasty bugs.
+ */
+ BUG_ON(current_cpu_type() != c->cputype);
+
if (c->options & MIPS_CPU_FPU) {
c->fpu_id = cpu_get_fpu_id();
- if (c->isa_level == MIPS_CPU_ISA_M32 ||
- c->isa_level == MIPS_CPU_ISA_M64) {
+ if (c->isa_level == MIPS_CPU_ISA_M32R1 ||
+ c->isa_level == MIPS_CPU_ISA_M32R2 ||
+ c->isa_level == MIPS_CPU_ISA_M64R1 ||
+ c->isa_level == MIPS_CPU_ISA_M64R2) {
if (c->fpu_id & MIPS_FPIR_3D)
c->ases |= MIPS_ASE_MIPS3D;
}
}
+
+ if (cpu_has_mips_r2)
+ c->srsets = ((read_c0_srsctl() >> 26) & 0x0f) + 1;
+ else
+ c->srsets = 1;
}
-__init void cpu_report(void)
+__cpuinit void cpu_report(void)
{
struct cpuinfo_mips *c = ¤t_cpu_data;
- printk("CPU revision is: %08x\n", c->processor_id);
+ printk(KERN_INFO "CPU revision is: %08x (%s)\n",
+ c->processor_id, cpu_name_string());
if (c->options & MIPS_CPU_FPU)
- printk("FPU revision is: %08x\n", c->fpu_id);
+ printk(KERN_INFO "FPU revision is: %08x\n", c->fpu_id);
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff