menu "Machine selection"
+config ZONE_DMA
+ bool
+
choice
prompt "System type"
default SGI_IP22
bool "4G Systems MTX-1 board"
select DMA_NONCOHERENT
select HW_HAS_PCI
+ select RESOURCES_64BIT if PCI
select SOC_AU1500
select SYS_HAS_CPU_MIPS32_R1
select SYS_SUPPORTS_LITTLE_ENDIAN
select SOC_AU1000
select DMA_NONCOHERENT
select HW_HAS_PCI
+ select RESOURCES_64BIT if PCI
select SWAP_IO_SPACE
select SYS_HAS_CPU_MIPS32_R1
select SYS_SUPPORTS_LITTLE_ENDIAN
select SOC_AU1100
select DMA_NONCOHERENT
select HW_HAS_PCI
+ select RESOURCES_64BIT if PCI
select SWAP_IO_SPACE
select SYS_HAS_CPU_MIPS32_R1
select SYS_SUPPORTS_LITTLE_ENDIAN
select SOC_AU1500
select DMA_NONCOHERENT
select HW_HAS_PCI
+ select RESOURCES_64BIT if PCI
select SYS_HAS_CPU_MIPS32_R1
select SYS_SUPPORTS_LITTLE_ENDIAN
select DMA_NONCOHERENT
select HW_HAS_PCI
select MIPS_DISABLE_OBSOLETE_IDE
+ select RESOURCES_64BIT if PCI
select SYS_HAS_CPU_MIPS32_R1
select SYS_SUPPORTS_LITTLE_ENDIAN
select SOC_AU1200
select DMA_NONCOHERENT
select MIPS_DISABLE_OBSOLETE_IDE
+ select RESOURCES_64BIT if PCI
select SYS_HAS_CPU_MIPS32_R1
select SYS_SUPPORTS_LITTLE_ENDIAN
select SOC_AU1000
select DMA_NONCOHERENT
select HW_HAS_PCI
+ select RESOURCES_64BIT if PCI
select SYS_HAS_CPU_MIPS32_R1
select SYS_SUPPORTS_LITTLE_ENDIAN
select DMA_NONCOHERENT
select HW_HAS_PCI
select MIPS_DISABLE_OBSOLETE_IDE
+ select RESOURCES_64BIT if PCI
select SYS_HAS_CPU_MIPS32_R1
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_LITTLE_ENDIAN
select HW_HAS_PCI
select DMA_NONCOHERENT
select MIPS_DISABLE_OBSOLETE_IDE
+ select RESOURCES_64BIT if PCI
select SYS_HAS_CPU_MIPS32_R1
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_LITTLE_ENDIAN
config BASLER_EXCITE
- bool "Basler eXcite smart camera support"
+ bool "Basler eXcite smart camera"
select DMA_COHERENT
select HW_HAS_PCI
select IRQ_CPU
select IRQ_CPU_RM7K
select IRQ_CPU_RM9K
- select SERIAL_RM9000
+ select MIPS_RM9122
select SYS_HAS_CPU_RM9000
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_KGDB
help
The eXcite is a smart camera platform manufactured by
- Basler Vision Technologies AG
+ Basler Vision Technologies AG.
config BASLER_EXCITE_PROTOTYPE
bool "Support for pre-release units"
select HW_HAS_PCI
select I8259
select IRQ_CPU
- select MIPS_GT64111
+ select PCI_GT64XXX_PCI0
select SYS_HAS_CPU_NEVADA
+ select SYS_HAS_EARLY_PRINTK
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
select SYS_SUPPORTS_LITTLE_ENDIAN
+ select GENERIC_HARDIRQS_NO__DO_IRQ
config MACH_DECSTATION
bool "DECstations"
select BOOT_ELF32
select DMA_NONCOHERENT
- select EARLY_PRINTK
+ select SYS_HAS_EARLY_PRINTK
select IRQ_CPU
select SYS_HAS_CPU_R3000
select SYS_HAS_CPU_R4X00
depends on EXPERIMENTAL
select DMA_NONCOHERENT
select HW_HAS_PCI
- select MIPS_GT64120
+ select PCI_GT64XXX_PCI0
select SYS_HAS_CPU_R5000
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_KGDB
help
This is an evaluation board based on the Galileo GT-64120
single-chip system controller that contains a MIPS R5000 compatible
<http://www.marvell.com/>. Say Y here if you wish to build a
kernel for this platform.
-config MIPS_EV96100
- bool "Galileo EV96100 Evaluation board (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select IRQ_CPU
- select MIPS_GT96100
- select RM7000_CPU_SCACHE
- select SWAP_IO_SPACE
- select SYS_HAS_CPU_R5000
- select SYS_HAS_CPU_RM7000
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
- select SYS_SUPPORTS_BIG_ENDIAN
- help
- This is an evaluation board based on the Galileo GT-96100 LAN/WAN
- communications controllers containing a MIPS R5000 compatible core
- running at 83MHz. Their website is <http://www.marvell.com/>. Say Y
- here if you wish to build a kernel for this platform.
-
-config MIPS_IVR
- bool "Globespan IVR board"
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select ITE_BOARD_GEN
- select SYS_HAS_CPU_NEVADA
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
- select SYS_SUPPORTS_LITTLE_ENDIAN
- help
- This is an evaluation board built by Globespan to showcase thir
- iVR (Internet Video Recorder) design. It utilizes a QED RM5231
- R5000 MIPS core. More information can be found out their website
- located at <http://www.globespan.net/>. Say Y here if you wish to
- build a kernel for this platform.
-
-config MIPS_ITE8172
- bool "ITE 8172G board"
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select ITE_BOARD_GEN
- select SYS_HAS_CPU_R5432
- select SYS_HAS_CPU_NEVADA
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
- select SYS_SUPPORTS_LITTLE_ENDIAN
- help
- Ths is an evaluation board made by ITE <http://www.ite.com.tw/>
- with ATX form factor that utilizes a MIPS R5000 to work with its
- ITE8172G companion internet appliance chip. The MIPS core can be
- either a NEC Vr5432 or QED RM5231. Say Y here if you wish to build
- a kernel for this platform.
-
config MACH_JAZZ
bool "Jazz family of machines"
select ARC
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
select SYS_SUPPORTS_100HZ
+ select GENERIC_HARDIRQS_NO__DO_IRQ
help
This a family of machines based on the MIPS R4030 chipset which was
used by several vendors to build RISC/os and Windows NT workstations.
config LASAT
bool "LASAT Networks platforms"
select DMA_NONCOHERENT
+ select SYS_HAS_EARLY_PRINTK
select HW_HAS_PCI
- select MIPS_GT64120
+ select PCI_GT64XXX_PCI0
select MIPS_NILE4
select R5000_CPU_SCACHE
select SYS_HAS_CPU_R5000
select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+ select SYS_SUPPORTS_64BIT_KERNEL if BROKEN
select SYS_SUPPORTS_LITTLE_ENDIAN
+ select GENERIC_HARDIRQS_NO__DO_IRQ
config MIPS_ATLAS
bool "MIPS Atlas board"
select BOOT_ELF32
select DMA_NONCOHERENT
+ select SYS_HAS_EARLY_PRINTK
select IRQ_CPU
select HW_HAS_PCI
select MIPS_BOARDS_GEN
select MIPS_BONITO64
- select MIPS_GT64120
+ select PCI_GT64XXX_PCI0
select MIPS_MSC
select RM7000_CPU_SCACHE
select SWAP_IO_SPACE
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_MULTITHREADING if EXPERIMENTAL
+ select SYS_SUPPORTS_SMARTMIPS
+ select GENERIC_HARDIRQS_NO__DO_IRQ
help
This enables support for the MIPS Technologies Atlas evaluation
board.
select BOOT_ELF32
select HAVE_STD_PC_SERIAL_PORT
select DMA_NONCOHERENT
- select IRQ_CPU
select GENERIC_ISA_DMA
+ select IRQ_CPU
select HW_HAS_PCI
select I8259
select MIPS_BOARDS_GEN
select MIPS_BONITO64
- select MIPS_GT64120
+ select MIPS_CPU_SCACHE
+ select PCI_GT64XXX_PCI0
select MIPS_MSC
select SWAP_IO_SPACE
select SYS_HAS_CPU_MIPS32_R1
select SYS_HAS_CPU_MIPS64_R1
select SYS_HAS_CPU_NEVADA
select SYS_HAS_CPU_RM7000
+ select SYS_HAS_EARLY_PRINTK
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_MULTITHREADING
+ select SYS_SUPPORTS_SMARTMIPS
help
This enables support for the MIPS Technologies Malta evaluation
board.
depends on EXPERIMENTAL
select IRQ_CPU
select DMA_NONCOHERENT
+ select SYS_HAS_EARLY_PRINTK
select MIPS_BOARDS_GEN
select SYS_HAS_CPU_MIPS32_R1
select SYS_HAS_CPU_MIPS32_R2
select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_SMARTMIPS
help
This enables support for the MIPS Technologies SEAD evaluation
board.
select BOOT_ELF32
select DMA_NONCOHERENT
select HW_HAS_PCI
- select MIPS_GT64120
+ select PCI_GT64XXX_PCI0
select SWAP_IO_SPACE
select SYS_HAS_CPU_MIPS32_R1
select SYS_HAS_CPU_MIPS32_R2
config MIPS_SIM
bool 'MIPS simulator (MIPSsim)'
select DMA_NONCOHERENT
+ select SYS_HAS_EARLY_PRINTK
select IRQ_CPU
select SYS_HAS_CPU_MIPS32_R1
select SYS_HAS_CPU_MIPS32_R2
+ select SYS_HAS_EARLY_PRINTK
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_LITTLE_ENDIAN
select RM7000_CPU_SCACHE
select SWAP_IO_SPACE
select SYS_HAS_CPU_RM9000
+ select SYS_HAS_EARLY_PRINTK
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_KGDB
help
The Jaguar ATX is a MIPS-based Single Board Computer (SBC) made by
Momentum Computer <http://www.momenco.com/>.
select HW_HAS_PCI
select IRQ_CPU
select IRQ_CPU_RM7K
- select MIPS_GT64120
+ select PCI_GT64XXX_PCI0
select RM7000_CPU_SCACHE
select SWAP_IO_SPACE
select SYS_HAS_CPU_RM7000
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_KGDB
help
The Ocelot is a MIPS-based Single Board Computer (SBC) made by
Momentum Computer <http://www.momenco.com/>.
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
+ select GENERIC_HARDIRQS_NO__DO_IRQ
help
The Ocelot is a MIPS-based Single Board Computer (SBC) made by
Momentum Computer <http://www.momenco.com/>.
select SWAP_IO_SPACE
select SYS_HAS_CPU_RM7000
select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL if BROKEN
select SYS_SUPPORTS_BIG_ENDIAN
help
The Ocelot is a MIPS-based Single Board Computer (SBC) made by
select SOC_AU1500
select SYS_SUPPORTS_LITTLE_ENDIAN
-config PNX8550_V2PCI
- bool "Philips PNX8550 based Viper2-PCI board"
- depends on BROKEN
+config PNX8550_JBS
+ bool "Philips PNX8550 based JBS board"
select PNX8550
select SYS_SUPPORTS_LITTLE_ENDIAN
-config PNX8550_JBS
- bool "Philips PNX8550 based JBS board"
- depends on BROKEN
+config PNX8550_STB810
+ bool "Support for Philips PNX8550 based STB810 board"
select PNX8550
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_CPU_R5432
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+ select SYS_SUPPORTS_KGDB
+ select SYS_SUPPORTS_KGDB
select SYS_SUPPORTS_LITTLE_ENDIAN
help
This enables support for the R5432-based NEC DDB Vrc-5477,
ether port USB, AC97, PCI, etc.
config MACH_VR41XX
- bool "NEC VR41XX-based machines"
+ bool "NEC VR4100 series based machines"
select SYS_HAS_CPU_VR41XX
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+ select GENERIC_HARDIRQS_NO__DO_IRQ
config PMC_YOSEMITE
bool "PMC-Sierra Yosemite eval board"
select IRQ_CPU_RM9K
select SWAP_IO_SPACE
select SYS_HAS_CPU_RM9000
+ select SYS_HAS_EARLY_PRINTK
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_HIGHMEM
+ select SYS_SUPPORTS_KGDB
+ select SYS_SUPPORTS_SMP
help
Yosemite is an evaluation board for the RM9000x2 processor
manufactured by PMC-Sierra.
select SYS_HAS_CPU_MIPS32_R1
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select ARCH_SPARSEMEM_ENABLE
+ select GENERIC_HARDIRQS_NO__DO_IRQ
+ select NR_CPUS_DEFAULT_1
+ select SYS_SUPPORTS_SMP
help
Qemu is a software emulator which among other architectures also
can simulate a MIPS32 4Kc system. This patch adds support for the
select HW_HAS_EISA
select IP22_CPU_SCACHE
select IRQ_CPU
- select NO_ISA if ISA
+ select GENERIC_ISA_DMA_SUPPORT_BROKEN
select SWAP_IO_SPACE
select SYS_HAS_CPU_R4X00
select SYS_HAS_CPU_R5000
+ select SYS_HAS_EARLY_PRINTK
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select ARC64
select BOOT_ELF64
select DMA_IP27
+ select SYS_HAS_EARLY_PRINTK
select HW_HAS_PCI
+ select NR_CPUS_DEFAULT_64
select PCI_DOMAINS
select SYS_HAS_CPU_R10000
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_KGDB
select SYS_SUPPORTS_NUMA
+ select SYS_SUPPORTS_SMP
+ select GENERIC_HARDIRQS_NO__DO_IRQ
help
This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics
workstations. To compile a Linux kernel that runs on these, say Y
select ARC
select ARC32
select BOOT_ELF32
- select OWN_DMA
- select DMA_IP32
select DMA_NONCOHERENT
select HW_HAS_PCI
select R5000_CPU_SCACHE
bool "Sibyte BCM91480B-BigSur"
select BOOT_ELF32
select DMA_COHERENT
+ select NR_CPUS_DEFAULT_4
select PCI_DOMAINS
select SIBYTE_BCM1x80
select SWAP_IO_SPACE
bool "Sibyte BCM91250A-SWARM"
select BOOT_ELF32
select DMA_COHERENT
+ select NR_CPUS_DEFAULT_2
select SIBYTE_SB1250
select SWAP_IO_SPACE
select SYS_HAS_CPU_SB1
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_HIGHMEM
+ select SYS_SUPPORTS_KGDB
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_SENTOSA
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
+ select NR_CPUS_DEFAULT_2
select SIBYTE_SB1250
select SWAP_IO_SPACE
select SYS_HAS_CPU_SB1
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
+ select NR_CPUS_DEFAULT_2
select SIBYTE_SB1250
select SWAP_IO_SPACE
select SYS_HAS_CPU_SB1
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
+ select NR_CPUS_DEFAULT_2
select SIBYTE_SB1250
select SWAP_IO_SPACE
select SYS_HAS_CPU_SB1
select SYS_SUPPORTS_HIGHMEM
select SYS_SUPPORTS_LITTLE_ENDIAN
-config SNI_RM200_PCI
- bool "SNI RM200 PCI"
+config SNI_RM
+ bool "SNI RM200/300/400"
select ARC if CPU_LITTLE_ENDIAN
select ARC32 if CPU_LITTLE_ENDIAN
select ARCH_MAY_HAVE_PC_FDC
select BOOT_ELF32
select DMA_NONCOHERENT
select GENERIC_ISA_DMA
- select HAVE_STD_PC_SERIAL_PORT
select HW_HAS_EISA
select HW_HAS_PCI
+ select IRQ_CPU
select I8253
select I8259
select ISA
select SWAP_IO_SPACE if CPU_BIG_ENDIAN
select SYS_HAS_CPU_R4X00
select SYS_HAS_CPU_R5000
+ select SYS_HAS_CPU_R10000
select R5000_CPU_SCACHE
+ select SYS_HAS_EARLY_PRINTK
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_HIGHMEM
select SYS_SUPPORTS_LITTLE_ENDIAN
help
- The SNI RM200 PCI was a MIPS-based platform manufactured by Siemens
- Nixdorf Informationssysteme (SNI), parent company of Pyramid
+ The SNI RM200/300/400 are MIPS-based machines manufactured by
+ Siemens Nixdorf Informationssysteme (SNI), parent company of Pyramid
Technology and now in turn merged with Fujitsu. Say Y here to
support this machine type.
select SWAP_IO_SPACE
select SYS_HAS_CPU_TX39XX
select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_BIG_ENDIAN
select TOSHIBA_BOARDS
+ select GENERIC_HARDIRQS_NO__DO_IRQ
config TOSHIBA_RBTX4927
bool "Toshiba TBTX49[23]7 board"
select HAS_TXX9_SERIAL
select HW_HAS_PCI
select I8259
- select ISA
select SWAP_IO_SPACE
select SYS_HAS_CPU_TX49XX
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_KGDB
select TOSHIBA_BOARDS
+ select GENERIC_HARDIRQS_NO__DO_IRQ
help
This Toshiba board is based on the TX4927 processor. Say Y here to
support this machine type
select HAS_TXX9_SERIAL
select HW_HAS_PCI
select I8259
- select ISA
select SWAP_IO_SPACE
select SYS_HAS_CPU_TX49XX
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_KGDB
select TOSHIBA_BOARDS
+ select GENERIC_HARDIRQS_NO__DO_IRQ
help
This Toshiba board is based on the TX4938 processor. Say Y here to
support this machine type
source "arch/mips/ddb5xxx/Kconfig"
source "arch/mips/gt64120/ev64120/Kconfig"
source "arch/mips/jazz/Kconfig"
-source "arch/mips/ite-boards/Kconfig"
source "arch/mips/lasat/Kconfig"
source "arch/mips/momentum/Kconfig"
source "arch/mips/pmc-sierra/Kconfig"
source "arch/mips/tx4938/Kconfig"
source "arch/mips/vr41xx/Kconfig"
source "arch/mips/philips/pnx8550/common/Kconfig"
-source "arch/mips/cobalt/Kconfig"
endmenu
config RWSEM_XCHGADD_ALGORITHM
bool
+config ARCH_HAS_ILOG2_U32
+ bool
+ default n
+
+config ARCH_HAS_ILOG2_U64
+ bool
+ default n
+
config GENERIC_FIND_NEXT_BIT
bool
default y
bool
default y
+config GENERIC_TIME
+ bool
+ default y
+
config SCHED_NO_NO_OMIT_FRAME_POINTER
bool
default y
+config GENERIC_HARDIRQS_NO__DO_IRQ
+ bool
+ default n
+
#
# Select some configuration options automatically based on user selections.
#
config DMA_NEED_PCI_MAP_STATE
bool
-config OWN_DMA
- bool
-
config EARLY_PRINTK
+ bool "Early printk" if EMBEDDED && DEBUG_KERNEL
+ depends on SYS_HAS_EARLY_PRINTK
+ default y
+ help
+ This option enables special console drivers which allow the kernel
+ to print messages very early in the bootup process.
+
+ This is useful for kernel debugging when your machine crashes very
+ early before the console code is initialized. For normal operation
+ it is not recommended because it looks on some machines ugly and
+ oesn't cooperate with an X server. You should normally N here,
+ unless you want to debug such a crash.
+
+config SYS_HAS_EARLY_PRINTK
bool
config GENERIC_ISA_DMA
bool
+ select ZONE_DMA
config I8259
bool
config MIPS_DISABLE_OBSOLETE_IDE
bool
+config GENERIC_ISA_DMA_SUPPORT_BROKEN
+ bool
+ select ZONE_DMA
+
#
-# Endianess selection. Suffiently obscure so many users don't know what to
+# Endianess selection. Sufficiently obscure so many users don't know what to
# answer,so we try hard to limit the available choices. Also the use of a
# choice statement should be more obvious to the user.
#
help
Some MIPS machines can be configured for either little or big endian
byte order. These modes require different kernels and a different
- Linux distribution. In general there is one prefered byteorder for a
+ Linux distribution. In general there is one preferred byteorder for a
particular system but some systems are just as commonly used in the
one or the other endianess.
endchoice
+config SYS_SUPPORTS_APM_EMULATION
+ bool
+
config SYS_SUPPORTS_BIG_ENDIAN
bool
config DDB5XXX_COMMON
bool
+ select SYS_SUPPORTS_KGDB
config MIPS_BOARDS_GEN
bool
-config MIPS_GT64111
- bool
-
-config MIPS_GT64120
+config PCI_GT64XXX_PCI0
bool
config MIPS_TX3927
bool
select HAS_TXX9_SERIAL
-config PCI_MARVELL
+config MIPS_RM9122
bool
+ select SERIAL_RM9000
+ select GPI_RM9000
+ select WDT_RM9000
-config ITE_BOARD_GEN
+config PCI_MARVELL
bool
config SOC_AU1000
bool
select SYS_HAS_CPU_MIPS32_R1
select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_APM_EMULATION
+ select SYS_SUPPORTS_KGDB
+
+config SERIAL_RM9000
+ bool
config PNX8550
bool
select DMA_NONCOHERENT
select HW_HAS_PCI
select SYS_HAS_CPU_MIPS32_R1
+ select SYS_HAS_EARLY_PRINTK
select SYS_SUPPORTS_32BIT_KERNEL
+ select GENERIC_HARDIRQS_NO__DO_IRQ
+ select SYS_SUPPORTS_KGDB
config SWAP_IO_SPACE
bool
depends on MARKEINS
default y
+config SERIAL_RM9000
+ bool
+
+config GPI_RM9000
+ bool
+
+config WDT_RM9000
+ bool
+
#
# Unfortunately not all GT64120 systems run the chip at the same clock.
# As the user for the clock rate and try to minimize the available options.
config ARC32
bool
-config AU1X00_USB_DEVICE
- bool
- depends on MIPS_PB1500 || MIPS_PB1100 || MIPS_PB1000
- default n
-
-config MIPS_GT96100
- bool
- select MIPS_GT64120
-
-config IT8172_CIR
- bool
- depends on MIPS_ITE8172 || MIPS_IVR
- default y
-
-config IT8712
- bool
- depends on MIPS_ITE8172
- default y
-
config BOOT_ELF32
bool
config MIPS_L1_CACHE_SHIFT
int
- default "4" if MACH_DECSTATION
+ default "4" if MACH_DECSTATION || SNI_RM
default "7" if SGI_IP27
default "5"
config ARC_CONSOLE
bool "ARC console support"
- depends on SGI_IP22 || SNI_RM200_PCI
+ depends on SGI_IP22 || (SNI_RM && CPU_LITTLE_ENDIAN)
config ARC_MEMORY
bool
- depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP32
+ depends on MACH_JAZZ || SNI_RM || SGI_IP32
default y
config ARC_PROMLIB
bool
- depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP22 || SGI_IP32
+ depends on MACH_JAZZ || SNI_RM || SGI_IP22 || SGI_IP32
default y
config ARC64
select CPU_SUPPORTS_32BIT_KERNEL
help
MIPS Technologies R6000 and R6000A series processors. Note these
- processors are extremly rare and the support for them is incomplete.
+ processors are extremely rare and the support for them is incomplete.
config CPU_NEVADA
bool "RM52xx"
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
+ select WEAK_ORDERING
config CPU_SB1
bool "SB1"
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
+ select WEAK_ORDERING
endchoice
config SYS_HAS_CPU_SB1
bool
+config WEAK_ORDERING
+ bool
endmenu
#
-# These two indicate any levelof the MIPS32 and MIPS64 architecture
+# These two indicate any level of the MIPS32 and MIPS64 architecture
#
config CPU_MIPS32
bool
default y if CPU_MIPS64_R1 || CPU_MIPS64_R2
#
-# These two indicate the revision of the architecture, either 32 bot 64 bit.
+# These two indicate the revision of the architecture, either Release 1 or Release 2
#
config CPU_MIPSR1
bool
bool
select BOARD_SCACHE
+#
+# Support for a MIPS32 / MIPS64 style S-caches
+#
+config MIPS_CPU_SCACHE
+ bool
+ select BOARD_SCACHE
+
config R5000_CPU_SCACHE
bool
select BOARD_SCACHE
config CPU_HAS_PREFETCH
bool
-config MIPS_MT
- bool "Enable MIPS MT"
- depends on CPU_MIPS32_R2
- #depends on CPU_MIPS64_R2 # later ...
-
choice
prompt "MIPS MT options"
- depends on MIPS_MT
-config MIPS_MT_SMTC
- bool "SMTC: Use all TCs on all VPEs for SMP"
+config MIPS_MT_DISABLED
+ bool "Disable multithreading support."
+ help
+ Use this option if your workload can't take advantage of
+ MIPS hardware multithreading support. On systems that don't have
+ the option of an MT-enabled processor this option will be the only
+ option in this menu.
+
+config MIPS_MT_SMP
+ bool "Use 1 TC on each available VPE for SMP"
+ depends on SYS_SUPPORTS_MULTITHREADING
select CPU_MIPSR2_IRQ_VI
select CPU_MIPSR2_SRS
+ select MIPS_MT
+ select NR_CPUS_DEFAULT_2
select SMP
+ select SYS_SUPPORTS_SMP
+ help
+ This is a kernel model which is also known a VSMP or lately
+ has been marketesed into SMVP.
-config MIPS_MT_SMP
- bool "Use 1 TC on each available VPE for SMP"
+config MIPS_MT_SMTC
+ bool "SMTC: Use all TCs on all VPEs for SMP"
+ depends on CPU_MIPS32_R2
+ #depends on CPU_MIPS64_R2 # once there is hardware ...
+ depends on SYS_SUPPORTS_MULTITHREADING
+ select CPU_MIPSR2_IRQ_VI
+ select CPU_MIPSR2_SRS
+ select MIPS_MT
+ select NR_CPUS_DEFAULT_8
select SMP
+ select SYS_SUPPORTS_SMP
+ help
+ This is a kernel model which is known a SMTC or lately has been
+ marketesed into SMVP.
config MIPS_VPE_LOADER
bool "VPE loader support."
- depends on MIPS_MT
+ depends on SYS_SUPPORTS_MULTITHREADING
+ select MIPS_MT
help
Includes a loader for loading an elf relocatable object
onto another VPE and running it.
endchoice
+config MIPS_MT
+ bool
+
+config SYS_SUPPORTS_MULTITHREADING
+ bool
+
config MIPS_MT_FPAFF
bool "Dynamic FPU affinity for FP-intensive threads"
depends on MIPS_MT
default y
+config MIPS_MT_SMTC_INSTANT_REPLAY
+ bool "Low-latency Dispatch of Deferred SMTC IPIs"
+ depends on MIPS_MT_SMTC && !PREEMPT
+ default y
+ help
+ SMTC pseudo-interrupts between TCs are deferred and queued
+ if the target TC is interrupt-inhibited (IXMT). In the first
+ SMTC prototypes, these queued IPIs were serviced on return
+ to user mode, or on entry into the kernel idle loop. The
+ INSTANT_REPLAY option dispatches them as part of local_irq_restore()
+ processing, which adds runtime overhead (hence the option to turn
+ it off), but ensures that IPIs are handled promptly even under
+ heavy I/O interrupt load.
+
config MIPS_VPE_LOADER_TOM
bool "Load VPE program into memory hidden from linux"
depends on MIPS_VPE_LOADER
config CPU_HAS_LLSC
bool
+config CPU_HAS_SMARTMIPS
+ depends on SYS_SUPPORTS_SMARTMIPS
+ bool "Support for the SmartMIPS ASE"
+ help
+ SmartMIPS is a extension of the MIPS32 architecture aimed at
+ increased security at both hardware and software level for
+ smartcards. Enabling this option will allow proper use of the
+ SmartMIPS instructions by Linux applications. However a kernel with
+ this option will not work on a MIPS core without SmartMIPS core. If
+ you don't know you probably don't have SmartMIPS and should say N
+ here.
+
config CPU_HAS_WB
bool
+#
+# Vectored interrupt mode is an R2 feature
+#
config CPU_MIPSR2_IRQ_VI
- bool "Vectored interrupt mode"
- depends on CPU_MIPSR2
- help
- Vectored interrupt mode allowing faster dispatching of interrupts.
- The board support code needs to be written to take advantage of this
- mode. Compatibility code is included to allow the kernel to run on
- a CPU that does not support vectored interrupts. It's safe to
- say Y here.
+ bool
+#
+# Extended interrupt mode is an R2 feature
+#
config CPU_MIPSR2_IRQ_EI
- bool "External interrupt controller mode"
- depends on CPU_MIPSR2
- help
- Extended interrupt mode takes advantage of an external interrupt
- controller to allow fast dispatching from many possible interrupt
- sources. Say N unless you know that external interrupt support is
- required.
+ bool
+#
+# Shadow registers are an R2 feature
+#
config CPU_MIPSR2_SRS
- bool "Make shadow set registers available for interrupt handlers"
- depends on CPU_MIPSR2_IRQ_VI || CPU_MIPSR2_IRQ_EI
- help
- Allow the kernel to use shadow register sets for fast interrupts.
- Interrupt handlers must be specially written to use shadow sets.
- Say N unless you know that shadow register set upport is needed.
+ bool
config CPU_HAS_SYNC
bool
bool
default y
+config IRQ_PER_CPU
+ bool
+
#
# - Highmem only makes sense for the 32-bit kernel.
# - The current highmem code will only work properly on physically indexed
config SYS_SUPPORTS_HIGHMEM
bool
+config SYS_SUPPORTS_SMARTMIPS
+ bool
+
config ARCH_FLATMEM_ENABLE
def_bool y
depends on !NUMA
or have huge holes in the physical address space for other reasons.
See <file:Documentation/vm/numa> for more.
+config ARCH_SPARSEMEM_ENABLE
+ bool
+ select SPARSEMEM_STATIC
+
config NUMA
bool "NUMA Support"
depends on SYS_SUPPORTS_NUMA
config SMP
bool "Multi-Processing support"
- depends on CPU_RM9000 || ((SIBYTE_BCM1x80 || SIBYTE_BCM1x55 || SIBYTE_SB1250 || QEMU) && !SIBYTE_STANDALONE) || SGI_IP27 || MIPS_MT_SMP || MIPS_MT_SMTC
- ---help---
+ depends on SYS_SUPPORTS_SMP
+ select IRQ_PER_CPU
+ help
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
you have a system with more than one CPU, say Y.
If you don't know what to do here, say N.
+config SYS_SUPPORTS_SMP
+ bool
+
+config NR_CPUS_DEFAULT_1
+ bool
+
+config NR_CPUS_DEFAULT_2
+ bool
+
+config NR_CPUS_DEFAULT_4
+ bool
+
+config NR_CPUS_DEFAULT_8
+ bool
+
+config NR_CPUS_DEFAULT_16
+ bool
+
+config NR_CPUS_DEFAULT_32
+ bool
+
+config NR_CPUS_DEFAULT_64
+ bool
+
config NR_CPUS
int "Maximum number of CPUs (2-64)"
- range 2 64
+ range 1 64 if NR_CPUS_DEFAULT_1
depends on SMP
- default "64" if SGI_IP27
- default "2"
+ default "1" if NR_CPUS_DEFAULT_1
+ default "2" if NR_CPUS_DEFAULT_2
+ default "4" if NR_CPUS_DEFAULT_4
+ default "8" if NR_CPUS_DEFAULT_8
+ default "16" if NR_CPUS_DEFAULT_16
+ default "32" if NR_CPUS_DEFAULT_32
+ default "64" if NR_CPUS_DEFAULT_64
help
This allows you to specify the maximum number of CPUs which this
kernel will support. The maximum supported value is 32 for 32-bit
kernel and 64 for 64-bit kernels; the minimum value which makes
- sense is 2.
+ sense is 1 for Qemu (useful only for kernel debugging purposes)
+ and 2 for all others.
This is purely to save memory - each supported CPU adds
- approximately eight kilobytes to the kernel image.
+ approximately eight kilobytes to the kernel image. For best
+ performance should round up your number of processors to the next
+ power of two.
#
# Timer Interrupt Frequency Configuration
source "kernel/Kconfig.preempt"
-config RTC_DS1742
- bool "DS1742 BRAM/RTC support"
- depends on TOSHIBA_JMR3927 || TOSHIBA_RBTX4927
-
config MIPS_INSANE_LARGE
bool "Support for large 64-bit configurations"
depends on CPU_R10000 && 64BIT
This will result in additional memory usage, so it is not
recommended for normal users.
+config KEXEC
+ bool "Kexec system call (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ help
+ kexec is a system call that implements the ability to shutdown your
+ current kernel, and to start another kernel. It is like a reboot
+ but it is indepedent of the system firmware. And like a reboot
+ you can start any kernel with it, not just Linux.
+
+ The name comes from the similiarity to the exec system call.
+
+ It is an ongoing process to be certain the hardware in a machine
+ is properly shutdown, so do not be surprised if this code does not
+ initially work for you. It may help to enable device hotplugging
+ support. As of this writing the exact hardware interface is
+ strongly in flux, so no good recommendation can be made.
+
+config SECCOMP
+ bool "Enable seccomp to safely compute untrusted bytecode"
+ depends on PROC_FS && BROKEN
+ default y
+ help
+ This kernel feature is useful for number crunching applications
+ that may need to compute untrusted bytecode during their
+ execution. By using pipes or other transports made available to
+ the process as file descriptors supporting the read/write
+ syscalls, it's possible to isolate those applications in
+ their own address space using seccomp. Once seccomp is
+ enabled via /proc/<pid>/seccomp, it cannot be disabled
+ and the task is only allowed to execute a few safe syscalls
+ defined by each seccomp mode.
+
+ If unsure, say Y. Only embedded should say N here.
+
endmenu
config RWSEM_GENERIC_SPINLOCK
bool
default y
+config LOCKDEP_SUPPORT
+ bool
+ default y
+
+config STACKTRACE_SUPPORT
+ bool
+ default y
+
source "init/Kconfig"
menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)"
config ISA
bool
-config NO_ISA
- bool
-
config EISA
bool "EISA support"
depends on HW_HAS_EISA
select ISA
+ select GENERIC_ISA_DMA
---help---
The Extended Industry Standard Architecture (EISA) bus was
developed as an open alternative to the IBM MicroChannel bus.
depends on MIPS32_COMPAT
default y
+config SYSVIPC_COMPAT
+ bool
+ depends on COMPAT && SYSVIPC
+ default y
+
config MIPS32_O32
bool "Kernel support for o32 binaries"
depends on MIPS32_COMPAT
bool
default y if MIPS32_O32 || MIPS32_N32
-config SECCOMP
- bool "Enable seccomp to safely compute untrusted bytecode"
- depends on PROC_FS && BROKEN
- default y
- help
- This kernel feature is useful for number crunching applications
- that may need to compute untrusted bytecode during their
- execution. By using pipes or other transports made available to
- the process as file descriptors supporting the read/write
- syscalls, it's possible to isolate those applications in
- their own address space using seccomp. Once seccomp is
- enabled via /proc/<pid>/seccomp, it cannot be disabled
- and the task is only allowed to execute a few safe syscalls
- defined by each seccomp mode.
+endmenu
- If unsure, say Y. Only embedded should say N here.
+menu "Power management options"
-config PM
- bool "Power Management support (EXPERIMENTAL)"
- depends on EXPERIMENTAL && SOC_AU1X00
-
-config APM
- tristate "Advanced Power Management Emulation"
- depends on PM
- ---help---
- APM is a BIOS specification for saving power using several different
- techniques. This is mostly useful for battery powered systems with
- APM compliant BIOSes. If you say Y here, the system time will be
- reset after a RESUME operation, the /proc/apm device will provide
- battery status information, and user-space programs will receive
- notification of APM "events" (e.g. battery status change).
-
- In order to use APM, you will need supporting software. For location
- and more information, read <file:Documentation/pm.txt> and the
- Battery Powered Linux mini-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- This driver does not spin down disk drives (see the hdparm(8)
- manpage ("man 8 hdparm") for that), and it doesn't turn off
- VESA-compliant "green" monitors.
-
- Generally, if you don't have a battery in your machine, there isn't
- much point in using this driver and you should say N. If you get
- random kernel OOPSes or reboots that don't seem to be related to
- anything, try disabling/enabling this option (or disabling/enabling
- APM in your BIOS).
+source "kernel/power/Kconfig"
endmenu
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff