powerpc/ps3: Update ps3_defconfig

[safe/jmp/linux-2.6] / arch / mips / Kconfig

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index c2b4cd5..29e8692 100644 (file)
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -5,8 +5,11 @@ config MIPS
        select HAVE_IDE
        select HAVE_OPROFILE
        select HAVE_ARCH_KGDB
-       # Horrible source of confusion.  Die, die, die ...
-       select EMBEDDED
+       select HAVE_FUNCTION_TRACER
+       select HAVE_FUNCTION_TRACE_MCOUNT_TEST
+       select HAVE_DYNAMIC_FTRACE
+       select HAVE_FTRACE_MCOUNT_RECORD
+       select HAVE_FUNCTION_GRAPH_TRACER
        select RTC_LIB if !MACH_LOONGSON
 
 mainmenu "Linux/MIPS Kernel Configuration"
@@ -38,30 +41,13 @@ config AR7
        select SYS_SUPPORTS_32BIT_KERNEL
        select SYS_SUPPORTS_LITTLE_ENDIAN
        select SYS_SUPPORTS_ZBOOT_UART16550
-       select GENERIC_GPIO
+       select ARCH_REQUIRE_GPIOLIB
        select GCD
        select VLYNQ
        help
          Support for the Texas Instruments AR7 System-on-a-Chip
          family: TNETD7100, 7200 and 7300.
 
-config BASLER_EXCITE
-       bool "Basler eXcite smart camera"
-       select CEVT_R4K
-       select CSRC_R4K
-       select DMA_COHERENT
-       select HW_HAS_PCI
-       select IRQ_CPU
-       select IRQ_CPU_RM7K
-       select IRQ_CPU_RM9K
-       select MIPS_RM9122
-       select SYS_HAS_CPU_RM9000
-       select SYS_SUPPORTS_32BIT_KERNEL
-       select SYS_SUPPORTS_BIG_ENDIAN
-       help
-         The eXcite is a smart camera platform manufactured by
-         Basler Vision Technologies AG.
-
 config BCM47XX
        bool "BCM47XX based boards"
        select CEVT_R4K
@@ -194,7 +180,7 @@ config LASAT
 
 config MACH_LOONGSON
        bool "Loongson family of machines"
-       select SYS_SUPPORTS_ZBOOT_UART16550
+       select SYS_SUPPORTS_ZBOOT
        help
          This enables the support of Loongson family of machines.
 
@@ -338,6 +324,24 @@ config PMC_YOSEMITE
          Yosemite is an evaluation board for the RM9000x2 processor
          manufactured by PMC-Sierra.
 
+config POWERTV
+       bool "Cisco PowerTV"
+       select BOOT_ELF32
+       select CEVT_R4K
+       select CPU_MIPSR2_IRQ_VI
+       select CPU_MIPSR2_IRQ_EI
+       select CSRC_POWERTV
+       select DMA_NONCOHERENT
+       select HW_HAS_PCI
+       select SYS_HAS_EARLY_PRINTK
+       select SYS_HAS_CPU_MIPS32_R2
+       select SYS_SUPPORTS_32BIT_KERNEL
+       select SYS_SUPPORTS_BIG_ENDIAN
+       select SYS_SUPPORTS_HIGHMEM
+       select USB_OHCI_LITTLE_ENDIAN
+       help
+         This enables support for the Cisco PowerTV Platform.
+
 config SGI_IP22
        bool "SGI IP22 (Indy/Indigo2)"
        select ARC
@@ -678,11 +682,11 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
 endchoice
 
 source "arch/mips/alchemy/Kconfig"
-source "arch/mips/basler/excite/Kconfig"
 source "arch/mips/bcm63xx/Kconfig"
 source "arch/mips/jazz/Kconfig"
 source "arch/mips/lasat/Kconfig"
 source "arch/mips/pmc-sierra/Kconfig"
+source "arch/mips/powertv/Kconfig"
 source "arch/mips/sgi-ip27/Kconfig"
 source "arch/mips/sibyte/Kconfig"
 source "arch/mips/txx9/Kconfig"
@@ -782,6 +786,9 @@ config CSRC_BCM1480
 config CSRC_IOASIC
        bool
 
+config CSRC_POWERTV
+       bool
+
 config CSRC_R4K_LIB
        bool
 
@@ -805,25 +812,11 @@ config DMA_COHERENT
 
 config DMA_NONCOHERENT
        bool
-       select DMA_NEED_PCI_MAP_STATE
+       select NEED_DMA_MAP_STATE
 
-config DMA_NEED_PCI_MAP_STATE
+config NEED_DMA_MAP_STATE
        bool
 
-config EARLY_PRINTK
-       bool "Early printk" if EMBEDDED && DEBUG_KERNEL
-       depends on SYS_HAS_EARLY_PRINTK
-       default y
-       help
-         This option enables special console drivers which allow the kernel
-         to print messages very early in the bootup process.
-
-         This is useful for kernel debugging when your machine crashes very
-         early before the console code is initialized. For normal operation,
-         it is not recommended because it looks ugly on some machines and
-         doesn't cooperate with an X server. You should normally say N here,
-         unless you want to debug such a crash.
-
 config SYS_HAS_EARLY_PRINTK
        bool
 
@@ -1302,7 +1295,6 @@ config CPU_CAVIUM_OCTEON
        select SYS_SUPPORTS_SMP
        select NR_CPUS_DEFAULT_16
        select WEAK_ORDERING
-       select WEAK_REORDERING_BEYOND_LLSC
        select CPU_SUPPORTS_HIGHMEM
        select CPU_SUPPORTS_HUGEPAGES
        help
@@ -1318,6 +1310,7 @@ config SYS_SUPPORTS_ZBOOT
        select HAVE_KERNEL_GZIP
        select HAVE_KERNEL_BZIP2
        select HAVE_KERNEL_LZMA
+       select HAVE_KERNEL_LZO
 
 config SYS_SUPPORTS_ZBOOT_UART16550
        bool
@@ -1334,6 +1327,9 @@ config SYS_HAS_CPU_LOONGSON2E
 
 config SYS_HAS_CPU_LOONGSON2F
        bool
+       select CPU_SUPPORTS_CPUFREQ
+       select CPU_SUPPORTS_ADDRWINCFG if 64BIT
+       select CPU_SUPPORTS_UNCACHED_ACCELERATED
 
 config SYS_HAS_CPU_MIPS32_R1
        bool
@@ -1443,8 +1439,14 @@ config CPU_SUPPORTS_32BIT_KERNEL
        bool
 config CPU_SUPPORTS_64BIT_KERNEL
        bool
+config CPU_SUPPORTS_CPUFREQ
+       bool
+config CPU_SUPPORTS_ADDRWINCFG
+       bool
 config CPU_SUPPORTS_HUGEPAGES
        bool
+config CPU_SUPPORTS_UNCACHED_ACCELERATED
+       bool
 config MIPS_PGD_C0_CONTEXT
        bool
        default y if 64BIT && CPU_MIPSR2
@@ -1723,6 +1725,9 @@ config SB1_PASS_2_1_WORKAROUNDS
 config 64BIT_PHYS_ADDR
        bool
 
+config ARCH_PHYS_ADDR_T_64BIT
+       def_bool 64BIT_PHYS_ADDR
+
 config CPU_HAS_SMARTMIPS
        depends on SYS_SUPPORTS_SMARTMIPS
        bool "Support for the SmartMIPS ASE"
@@ -2130,6 +2135,7 @@ config MMU
 
 config I8253
        bool
+       select MIPS_EXTERNAL_TIMER
 
 config ZONE_DMA32
        bool
@@ -2206,6 +2212,8 @@ source "kernel/power/Kconfig"
 
 endmenu
 
+source "arch/mips/kernel/cpufreq/Kconfig"
+
 source "net/Kconfig"
 
 source "drivers/Kconfig"