config M68K
bool
default y
+ select HAVE_AOUT
+ select HAVE_IDE
config MMU
bool
config ARCH_MAY_HAVE_PC_FDC
bool
- depends on Q40 || (BROKEN && SUN3X)
+ depends on BROKEN && (Q40 || SUN3X)
default y
config NO_IOPORT
config NO_DMA
def_bool SUN3
+config HZ
+ int
+ default 100
+
+config GENERIC_TIME
+ def_bool y
+
+config ARCH_USES_GETTIMEOFFSET
+ def_bool y
+
mainmenu "Linux/68k Kernel Configuration"
source "init/Kconfig"
+source "kernel/Kconfig.freezer"
+
menu "Platform dependent setup"
config EISA
To compile this driver as modules, choose M here: the
modules will be called pcmcia_core and ds.
-config SUN3
- bool "Sun3 support"
- select M68020
- select MMU_SUN3 if MMU
- help
- This option enables support for the Sun 3 series of workstations
- (3/50, 3/60, 3/1xx, 3/2xx systems). Enabling this option requires
- that all other hardware types must be disabled, as Sun 3 kernels
- are incompatible with all other m68k targets (including Sun 3x!).
-
- If you don't want to compile a kernel exclusively for a Sun 3, say N.
-
config AMIGA
bool "Amiga support"
- depends on !MMU_SUN3
+ select MMU_MOTOROLA if MMU
help
This option enables support for the Amiga series of computers. If
you plan to use this kernel on an Amiga, say Y here and browse the
config ATARI
bool "Atari support"
- depends on !MMU_SUN3
+ select MMU_MOTOROLA if MMU
help
This option enables support for the 68000-based Atari series of
computers (including the TT, Falcon and Medusa). If you plan to use
this kernel on an Atari, say Y here and browse the material
available in <file:Documentation/m68k>; otherwise say N.
-config HADES
- bool "Hades support"
- depends on ATARI && BROKEN
- help
- This option enables support for the Hades Atari clone. If you plan
- to use this kernel on a Hades, say Y here; otherwise say N.
-
-config PCI
- bool
- depends on HADES
- default y
- help
- Find out whether you have a PCI motherboard. PCI is the name of a
- bus system, i.e. the way the CPU talks to the other stuff inside
- your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
- VESA. If you have PCI, say Y, otherwise N.
-
config MAC
bool "Macintosh support"
- depends on !MMU_SUN3
+ select MMU_MOTOROLA if MMU
help
This option enables support for the Apple Macintosh series of
computers (yes, there is experimental support now, at least for part
config APOLLO
bool "Apollo support"
- depends on !MMU_SUN3
+ select MMU_MOTOROLA if MMU
help
Say Y here if you want to run Linux on an MC680x0-based Apollo
Domain workstation such as the DN3500.
config VME
bool "VME (Motorola and BVM) support"
- depends on !MMU_SUN3
+ select MMU_MOTOROLA if MMU
help
Say Y here if you want to build a kernel for a 680x0 based VME
board. Boards currently supported include Motorola boards MVME147,
config HP300
bool "HP9000/300 and HP9000/400 support"
- depends on !MMU_SUN3
+ select MMU_MOTOROLA if MMU
help
This option enables support for the HP9000/300 and HP9000/400 series
of workstations. Support for these machines is still somewhat
config SUN3X
bool "Sun3x support"
- depends on !MMU_SUN3
+ select MMU_MOTOROLA if MMU
select M68030
help
This option enables support for the Sun 3x series of workstations.
config Q40
bool "Q40/Q60 support"
- depends on !MMU_SUN3
+ select MMU_MOTOROLA if MMU
help
The Q40 is a Motorola 68040-based successor to the Sinclair QL
manufactured in Germany. There is an official Q40 home page at
Q60. Select your CPU below. For 68LC060 don't forget to enable FPU
emulation.
+config SUN3
+ bool "Sun3 support"
+ depends on !MMU_MOTOROLA
+ select MMU_SUN3 if MMU
+ select M68020
+ help
+ This option enables support for the Sun 3 series of workstations
+ (3/50, 3/60, 3/1xx, 3/2xx systems). Enabling this option requires
+ that all other hardware types must be disabled, as Sun 3 kernels
+ are incompatible with all other m68k targets (including Sun 3x!).
+
+ If you don't want to compile a kernel exclusively for a Sun 3, say N.
+
comment "Processor type"
config M68020
config MMU_MOTOROLA
bool
- depends on MMU && !MMU_SUN3
- default y
config MMU_SUN3
bool
+ depends on MMU && !MMU_MOTOROLA
config M68KFPU_EMU
bool "Math emulation support (EXPERIMENTAL)"
correct rounding, the emulator can (often) do the same but this
extra calculation can cost quite some time, so you can disable
it here. The emulator will then "only" calculate with a 64 bit
- mantissa and round slightly incorrect, what is more then enough
+ mantissa and round slightly incorrect, what is more than enough
for normal usage.
config M68KFPU_EMU_ONLY
Note for Falcon users: You also have an MFP port, it's just not
wired to the outside... But you could use the port under Linux.
-config ATARI_SCC
- tristate "Atari SCC serial support"
- depends on ATARI
- ---help---
- If you have serial ports based on a Zilog SCC chip (Modem2, Serial2,
- LAN) and like to use them under Linux, say Y. All built-in SCC's are
- supported (TT, MegaSTE, Falcon), and also the ST-ESCC. If you have
- two connectors for channel A (Serial2 and LAN), they are visible as
- two separate devices.
-
- To compile this driver as a module, choose M here.
-
-config ATARI_SCC_DMA
- bool "Atari SCC serial DMA support"
- depends on ATARI_SCC
- help
- This enables DMA support for receiving data on channel A of the SCC.
- If you have a TT you may say Y here and read
- drivers/char/atari_SCC.README. All other users should say N here,
- because only the TT has SCC-DMA, even if your machine keeps claiming
- so at boot time.
-
config ATARI_MIDI
tristate "Atari MIDI serial support"
depends on ATARI
To compile this driver as a module, choose M here.
-config WHIPPET_SERIAL
- tristate "Hisoft Whippet PCMCIA serial support"
- depends on AMIGA_PCMCIA
- help
- HiSoft has a web page at <http://www.hisoft.co.uk/>, but there
- is no listing for the Whippet in their Amiga section.
-
config MULTIFACE_III_TTY
tristate "Multiface Card III serial support"
depends on AMIGA
Say Y to enable doing IP over the parallel port on your GVP
IO-Extender card, N otherwise.
-config MAC_SCC
- tristate "Macintosh serial support"
- depends on MAC
-
config MAC_HID
bool
depends on INPUT_ADBHID
default y
-config ADB_KEYBOARD
- bool "Support for ADB keyboard (old driver)"
- depends on MAC && !INPUT_ADBHID
- help
- This option allows you to use an ADB keyboard attached to your
- machine. Note that this disables any other (ie. PS/2) keyboard
- support, even if your machine is physically capable of using both at
- the same time.
-
- If you use an ADB keyboard (4 pin connector), say Y here.
- If you use a PS/2 keyboard (6 pin connector), say N here.
-
config HPDCA
tristate "HP DCA serial support"
depends on DIO && SERIAL_8250
config MVME147_SCC
bool "SCC support for MVME147 serial ports"
- depends on MVME147
+ depends on MVME147 && BROKEN
help
This is the driver for the serial ports on the Motorola MVME147
boards. Everyone using one of these boards should say Y here.
config MVME162_SCC
bool "SCC support for MVME162 serial ports"
- depends on MVME16x
+ depends on MVME16x && BROKEN
help
This is the driver for the serial ports on the Motorola MVME162 and
172 boards. Everyone using one of these boards should say Y here.
config BVME6000_SCC
bool "SCC support for BVME6000 serial ports"
- depends on BVME6000
+ depends on BVME6000 && BROKEN
help
This is the driver for the serial ports on the BVME4000 and BVME6000
boards from BVM Ltd. Everyone using one of these boards should say
config SERIAL_CONSOLE
bool "Support for serial port console"
- depends on (AMIGA || ATARI || MAC || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_SCC=y || ATARI_MIDI=y || MAC_SCC=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL)
+ depends on (AMIGA || ATARI || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_MIDI=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL)
---help---
If you say Y here, it will be possible to use a serial port as the
system console (the system console is the device which receives all
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff