config M32R
bool
default y
+ select HAVE_IDE
+ select HAVE_OPROFILE
+ select INIT_ALL_POSSIBLE
config SBUS
bool
-config UID16
+config GENERIC_ISA_DMA
bool
- default n
+ default y
-config GENERIC_ISA_DMA
+config ZONE_DMA
bool
default y
bool
default y
+config NO_IOPORT
+ def_bool y
+
+config NO_DMA
+ def_bool y
+
+config HZ
+ int
+ default 100
+
source "init/Kconfig"
+source "kernel/Kconfig.freezer"
+
menu "Processor type and features"
config PLAT_USRV
bool "uServer"
+ select PLAT_HAS_INT1ICU
config PLAT_M32700UT
bool "M32700UT"
+ select PLAT_HAS_INT0ICU
+ select PLAT_HAS_INT1ICU
+ select PLAT_HAS_INT2ICU
help
The M3T-M32700UT is an evaluation board based on uT-Engine
specification. This board has an M32700 (Chaos) evaluation chip.
config PLAT_OPSPUT
bool "OPSPUT"
+ select PLAT_HAS_INT0ICU
+ select PLAT_HAS_INT1ICU
+ select PLAT_HAS_INT2ICU
help
The OPSPUT is an evaluation board based on uT-Engine
specification. This board has a OPSP-REP chip.
config PLAT_MAPPI3
bool "Mappi-III(M3A-2170)"
+config PLAT_M32104UT
+ bool "M32104UT"
+ select PLAT_HAS_INT1ICU
+ help
+ The M3T-M32104UT is an reference board based on uT-Engine
+ specification. This board has a M32104 chip.
+
endchoice
choice
config CHIP_M32102
bool "M32102"
+config CHIP_M32104
+ bool "M32104"
+ depends on PLAT_M32104UT
+
config CHIP_VDEC2
bool "VDEC2"
config ISA_M32R
bool
- depends on CHIP_M32102
+ depends on CHIP_M32102 || CHIP_M32104
default y
config ISA_M32R2
depends on CHIP_M32700 || CHIP_OPSP
default y
+config PLAT_HAS_INT0ICU
+ bool
+ default n
+
+config PLAT_HAS_INT1ICU
+ bool
+ default n
+
+config PLAT_HAS_INT2ICU
+ bool
+ default n
+
config BUS_CLOCK
int "Bus Clock [Hz] (integer)"
default "70000000" if PLAT_MAPPI
default "50000000" if PLAT_MAPPI3
default "50000000" if PLAT_M32700UT
default "50000000" if PLAT_OPSPUT
+ default "54000000" if PLAT_M32104UT
default "33333333" if PLAT_OAKS32R
default "20000000" if PLAT_MAPPI2
default "08000000" if PLAT_USRV
default "08000000" if PLAT_M32700UT
default "08000000" if PLAT_OPSPUT
+ default "04000000" if PLAT_M32104UT
default "01000000" if PLAT_OAKS32R
config MEMORY_SIZE
default "02000000" if PLAT_USRV
default "01000000" if PLAT_M32700UT
default "01000000" if PLAT_OPSPUT
+ default "01000000" if PLAT_M32104UT
default "00800000" if PLAT_OAKS32R
-config NOHIGHMEM
- bool
- default y
-
config ARCH_DISCONTIGMEM_ENABLE
bool "Internal RAM Support"
- depends on CHIP_M32700 || CHIP_M32102 || CHIP_VDEC2 || CHIP_OPSP
+ depends on CHIP_M32700 || CHIP_M32102 || CHIP_VDEC2 || CHIP_OPSP || CHIP_M32104
default y
source "mm/Kconfig"
config IRAM_START
hex "Internal memory start address (hex)"
- default "00f00000"
- depends on (CHIP_M32700 || CHIP_M32102 || CHIP_VDEC2 || CHIP_OPSP) && DISCONTIGMEM
+ default "00f00000" if !CHIP_M32104
+ default "00700000" if CHIP_M32104
+ depends on (CHIP_M32700 || CHIP_M32102 || CHIP_VDEC2 || CHIP_OPSP || CHIP_M32104) && DISCONTIGMEM
config IRAM_SIZE
hex "Internal memory size (hex)"
- depends on (CHIP_M32700 || CHIP_M32102 || CHIP_VDEC2 || CHIP_OPSP) && DISCONTIGMEM
+ depends on (CHIP_M32700 || CHIP_M32102 || CHIP_VDEC2 || CHIP_OPSP || CHIP_M32104) && DISCONTIGMEM
default "00080000" if CHIP_M32700
- default "00010000" if CHIP_M32102 || CHIP_OPSP
+ default "00010000" if CHIP_M32102 || CHIP_OPSP || CHIP_M32104
default "00008000" if CHIP_VDEC2
#
# Define implied options from the CPU selection here
#
+config GENERIC_LOCKBREAK
+ bool
+ default y
+ depends on SMP && PREEMPT
+
config RWSEM_GENERIC_SPINLOCK
bool
depends on M32R
bool
default n
+config ARCH_HAS_ILOG2_U32
+ bool
+ default n
+
+config ARCH_HAS_ILOG2_U64
+ bool
+ default n
+
+config GENERIC_FIND_NEXT_BIT
+ bool
+ default y
+
+config GENERIC_HWEIGHT
+ bool
+ default y
+
config GENERIC_CALIBRATE_DELAY
bool
default y
+config SCHED_OMIT_FRAME_POINTER
+ bool
+ default y
+
config PREEMPT
bool "Preemptible Kernel"
help
Say Y here if you are building a kernel for a desktop, embedded
or real-time system. Say N if you are unsure.
-config HAVE_DEC_LOCK
- bool
- depends on (SMP || PREEMPT)
- default n
-
config SMP
bool "Symmetric multi-processing support"
+ select USE_GENERIC_SMP_HELPERS
---help---
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
Management" code will be disabled if you say Y here.
- See also the <file:Documentation/smp.tex>,
- <file:Documentation/smp.txt> and the SMP-HOWTO available at
+ See also the SMP-HOWTO available at
<http://www.linuxdoc.org/docs.html#howto>.
If you don't know what to do here, say N.
# Common NUMA Features
config NUMA
bool "Numa Memory Allocation Support"
- depends on SMP
+ depends on SMP && BROKEN
default n
+config NODES_SHIFT
+ int
+ default "1"
+ depends on NEED_MULTIPLE_NODES
+
# turning this on wastes a bunch of space.
# Summit needs it only when NUMA is on
config BOOT_IOREMAP
config PCI
bool "PCI support"
+ depends on BROKEN
default n
help
Find out whether you have a PCI motherboard. PCI is the name of a
your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
VESA. If you have PCI, say Y, otherwise N.
- The PCI-HOWTO, available from
- <http://www.linuxdoc.org/docs.html#howto>, contains valuable
- information about which PCI hardware does work under Linux and which
- doesn't.
-
choice
prompt "PCI access mode"
depends on PCI
source "drivers/pci/Kconfig"
config ISA
- bool "ISA support"
- help
- Find out whether you have ISA slots on your motherboard. ISA is the
- name of a bus system, i.e. the way the CPU talks to the other stuff
- inside your box. If you have ISA, say Y, otherwise N.
+ bool
source "drivers/pcmcia/Kconfig"
source "fs/Kconfig"
-source "arch/m32r/oprofile/Kconfig"
-
source "arch/m32r/Kconfig.debug"
source "security/Kconfig"