* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 1999,2001-2005 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (C) 1999,2001-2006 Silicon Graphics, Inc. All rights reserved.
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/kdev_t.h>
#include <linux/string.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
#include <linux/console.h>
#include <linux/timex.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/acpi.h>
#include <linux/compiler.h>
-#include <linux/sched.h>
#include <linux/root_dev.h>
#include <linux/nodemask.h>
#include <linux/pm.h>
+#include <linux/efi.h>
#include <asm/io.h>
#include <asm/sal.h>
extern unsigned long last_time_offset;
extern void (*ia64_mark_idle) (int);
extern void snidle(int);
-extern unsigned char acpi_kbd_controller_present;
unsigned long sn_rtc_cycles_per_second;
EXPORT_SYMBOL(sn_rtc_cycles_per_second);
DEFINE_PER_CPU(struct sn_hub_info_s, __sn_hub_info);
EXPORT_PER_CPU_SYMBOL(__sn_hub_info);
-DEFINE_PER_CPU(short, __sn_cnodeid_to_nasid[MAX_NUMNODES]);
+DEFINE_PER_CPU(short [MAX_COMPACT_NODES], __sn_cnodeid_to_nasid);
EXPORT_PER_CPU_SYMBOL(__sn_cnodeid_to_nasid);
DEFINE_PER_CPU(struct nodepda_s *, __sn_nodepda);
};
/*
- * This is here so we can use the CMOS detection in ide-probe.c to
- * determine what drives are present. In theory, we don't need this
- * as the auto-detection could be done via ide-probe.c:do_probe() but
- * in practice that would be much slower, which is painful when
- * running in the simulator. Note that passing zeroes in DRIVE_INFO
- * is sufficient (the IDE driver will autodetect the drive geometry).
- */
-#ifdef CONFIG_IA64_GENERIC
-extern char drive_info[4 * 16];
-#else
-char drive_info[4 * 16];
-#endif
-
-/*
* This routine can only be used during init, since
* smp_boot_data is an init data structure.
* We have to use smp_boot_data.cpu_phys_id to find
int i;
int nid;
- nid = pxm_to_nid_map[pxm];
+ nid = pxm_to_node(pxm);
for (i = 0; i < num_node_memblks; i++) {
if (node_memblk[i].nid == nid) {
return NASID_GET(node_memblk[i].start_paddr);
* IO on SN2 is done via SAL calls, early_printk won't work without this.
*
* This code duplicates some of the ACPI table parsing that is in efi.c & sal.c.
- * Any changes to those file may have to be made hereas well.
+ * Any changes to those file may have to be made here as well.
*/
efi_systab = (efi_system_table_t *) __va(ia64_boot_param->efi_systab);
config_tables = __va(efi_systab->tables);
}
extern int platform_intr_list[];
-static int __initdata shub_1_1_found = 0;
+static int __cpuinitdata shub_1_1_found;
/*
* sn_check_for_wars
* Set flag for enabling shub specific wars
*/
-static inline int __init is_shub_1_1(int nasid)
+static inline int __cpuinit is_shub_1_1(int nasid)
{
unsigned long id;
int rev;
return rev <= 2;
}
-static void __init sn_check_for_wars(void)
+static void __cpuinit sn_check_for_wars(void)
{
int cnode;
}
}
+/*
+ * Scan the EFI PCDP table (if it exists) for an acceptable VGA console
+ * output device. If one exists, pick it and set sn_legacy_{io,mem} to
+ * reflect the bus offsets needed to address it.
+ *
+ * Since pcdp support in SN is not supported in the 2.4 kernel (or at least
+ * the one lbs is based on) just declare the needed structs here.
+ *
+ * Reference spec http://www.dig64.org/specifications/DIG64_PCDPv20.pdf
+ *
+ * Returns 0 if no acceptable vga is found, !0 otherwise.
+ *
+ * Note: This stuff is duped here because Altix requires the PCDP to
+ * locate a usable VGA device due to lack of proper ACPI support. Structures
+ * could be used from drivers/firmware/pcdp.h, but it was decided that moving
+ * this file to a more public location just for Altix use was undesirable.
+ */
+
+struct hcdp_uart_desc {
+ u8 pad[45];
+};
+
+struct pcdp {
+ u8 signature[4]; /* should be 'HCDP' */
+ u32 length;
+ u8 rev; /* should be >=3 for pcdp, <3 for hcdp */
+ u8 sum;
+ u8 oem_id[6];
+ u64 oem_tableid;
+ u32 oem_rev;
+ u32 creator_id;
+ u32 creator_rev;
+ u32 num_type0;
+ struct hcdp_uart_desc uart[0]; /* num_type0 of these */
+ /* pcdp descriptors follow */
+} __attribute__((packed));
+
+struct pcdp_device_desc {
+ u8 type;
+ u8 primary;
+ u16 length;
+ u16 index;
+ /* interconnect specific structure follows */
+ /* device specific structure follows that */
+} __attribute__((packed));
+
+struct pcdp_interface_pci {
+ u8 type; /* 1 == pci */
+ u8 reserved;
+ u16 length;
+ u8 segment;
+ u8 bus;
+ u8 dev;
+ u8 fun;
+ u16 devid;
+ u16 vendid;
+ u32 acpi_interrupt;
+ u64 mmio_tra;
+ u64 ioport_tra;
+ u8 flags;
+ u8 translation;
+} __attribute__((packed));
+
+struct pcdp_vga_device {
+ u8 num_eas_desc;
+ /* ACPI Extended Address Space Desc follows */
+} __attribute__((packed));
+
+/* from pcdp_device_desc.primary */
+#define PCDP_PRIMARY_CONSOLE 0x01
+
+/* from pcdp_device_desc.type */
+#define PCDP_CONSOLE_INOUT 0x0
+#define PCDP_CONSOLE_DEBUG 0x1
+#define PCDP_CONSOLE_OUT 0x2
+#define PCDP_CONSOLE_IN 0x3
+#define PCDP_CONSOLE_TYPE_VGA 0x8
+
+#define PCDP_CONSOLE_VGA (PCDP_CONSOLE_TYPE_VGA | PCDP_CONSOLE_OUT)
+
+/* from pcdp_interface_pci.type */
+#define PCDP_IF_PCI 1
+
+/* from pcdp_interface_pci.translation */
+#define PCDP_PCI_TRANS_IOPORT 0x02
+#define PCDP_PCI_TRANS_MMIO 0x01
+
+#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
+static void
+sn_scan_pcdp(void)
+{
+ u8 *bp;
+ struct pcdp *pcdp;
+ struct pcdp_device_desc device;
+ struct pcdp_interface_pci if_pci;
+ extern struct efi efi;
+
+ if (efi.hcdp == EFI_INVALID_TABLE_ADDR)
+ return; /* no hcdp/pcdp table */
+
+ pcdp = __va(efi.hcdp);
+
+ if (pcdp->rev < 3)
+ return; /* only support PCDP (rev >= 3) */
+
+ for (bp = (u8 *)&pcdp->uart[pcdp->num_type0];
+ bp < (u8 *)pcdp + pcdp->length;
+ bp += device.length) {
+ memcpy(&device, bp, sizeof(device));
+ if (! (device.primary & PCDP_PRIMARY_CONSOLE))
+ continue; /* not primary console */
+
+ if (device.type != PCDP_CONSOLE_VGA)
+ continue; /* not VGA descriptor */
+
+ memcpy(&if_pci, bp+sizeof(device), sizeof(if_pci));
+ if (if_pci.type != PCDP_IF_PCI)
+ continue; /* not PCI interconnect */
+
+ if (if_pci.translation & PCDP_PCI_TRANS_IOPORT)
+ vga_console_iobase = if_pci.ioport_tra;
+
+ if (if_pci.translation & PCDP_PCI_TRANS_MMIO)
+ vga_console_membase =
+ if_pci.mmio_tra | __IA64_UNCACHED_OFFSET;
+
+ break; /* once we find the primary, we're done */
+ }
+}
+#endif
+
+static unsigned long sn2_rtc_initial;
+
/**
* sn_setup - SN platform setup routine
* @cmdline_p: kernel command line
u32 version = sn_sal_rev();
extern void sn_cpu_init(void);
+ sn2_rtc_initial = rtc_time();
ia64_sn_plat_set_error_handling_features(); // obsolete
ia64_sn_set_os_feature(OSF_MCA_SLV_TO_OS_INIT_SLV);
ia64_sn_set_os_feature(OSF_FEAT_LOG_SBES);
+ /*
+ * Note: The calls to notify the PROM of ACPI and PCI Segment
+ * support must be done prior to acpi_load_tables(), as
+ * an ACPI capable PROM will rebuild the DSDT as result
+ * of the call.
+ */
+ ia64_sn_set_os_feature(OSF_PCISEGMENT_ENABLE);
+ ia64_sn_set_os_feature(OSF_ACPI_ENABLE);
+ /* Load the new DSDT and SSDT tables into the global table list. */
+ acpi_table_init();
#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
/*
- * If there was a primary vga adapter identified through the
- * EFI PCDP table, make it the preferred console. Otherwise
- * zero out conswitchp.
+ * Handle SN vga console.
+ *
+ * SN systems do not have enough ACPI table information
+ * being passed from prom to identify VGA adapters and the legacy
+ * addresses to access them. Until that is done, SN systems rely
+ * on the PCDP table to identify the primary VGA console if one
+ * exists.
+ *
+ * However, kernel PCDP support is optional, and even if it is built
+ * into the kernel, it will not be used if the boot cmdline contains
+ * console= directives.
+ *
+ * So, to work around this mess, we duplicate some of the PCDP code
+ * here so that the primary VGA console (as defined by PCDP) will
+ * work on SN systems even if a different console (e.g. serial) is
+ * selected on the boot line (or CONFIG_EFI_PCDP is off).
*/
+ if (! vga_console_membase)
+ sn_scan_pcdp();
+
+ /*
+ * Setup legacy IO space.
+ * vga_console_iobase maps to PCI IO Space address 0 on the
+ * bus containing the VGA console.
+ */
+ if (vga_console_iobase) {
+ io_space[0].mmio_base =
+ (unsigned long) ioremap(vga_console_iobase, 0);
+ io_space[0].sparse = 0;
+ }
+
if (vga_console_membase) {
/* usable vga ... make tty0 the preferred default console */
- add_preferred_console("tty", 0, NULL);
+ if (!strstr(*cmdline_p, "console="))
+ add_preferred_console("tty", 0, NULL);
} else {
printk(KERN_DEBUG "SGI: Disabling VGA console\n");
+ if (!strstr(*cmdline_p, "console="))
+ add_preferred_console("ttySG", 0, NULL);
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
#else
*/
build_cnode_tables();
- /*
- * Old PROMs do not provide an ACPI FADT. Disable legacy keyboard
- * support here so we don't have to listen to failed keyboard probe
- * messages.
- */
- if (version <= 0x0209 && acpi_kbd_controller_present) {
- printk(KERN_INFO "Disabling legacy keyboard support as prom "
- "is too old and doesn't provide FADT\n");
- acpi_kbd_controller_present = 0;
- }
-
- printk("SGI SAL version %x.%02x\n", version >> 8, version & 0x00FF);
-
status =
ia64_sal_freq_base(SAL_FREQ_BASE_REALTIME_CLOCK, &ticks_per_sec,
&drift);
platform_intr_list[ACPI_INTERRUPT_CPEI] = IA64_CPE_VECTOR;
+ printk("SGI SAL version %x.%02x\n", version >> 8, version & 0x00FF);
+
/*
* we set the default root device to /dev/hda
* to make simulation easy
* for sn.
*/
pm_power_off = ia64_sn_power_down;
+ current->thread.flags |= IA64_THREAD_MIGRATION;
}
/**
for_each_online_node(cnode) {
nodepdaindr[cnode] =
alloc_bootmem_node(NODE_DATA(cnode), sizeof(nodepda_t));
- memset(nodepdaindr[cnode], 0, sizeof(nodepda_t));
memset(nodepdaindr[cnode]->phys_cpuid, -1,
sizeof(nodepdaindr[cnode]->phys_cpuid));
spin_lock_init(&nodepdaindr[cnode]->ptc_lock);
/*
* Allocate & initialize nodepda for TIOs. For now, put them on node 0.
*/
- for (cnode = num_online_nodes(); cnode < num_cnodes; cnode++) {
+ for (cnode = num_online_nodes(); cnode < num_cnodes; cnode++)
nodepdaindr[cnode] =
alloc_bootmem_node(NODE_DATA(0), sizeof(nodepda_t));
- memset(nodepdaindr[cnode], 0, sizeof(nodepda_t));
- }
/*
* Now copy the array of nodepda pointers to each nodepda.
* Also sets up a few fields in the nodepda. Also known as
* platform_cpu_init() by the ia64 machvec code.
*/
-void __init sn_cpu_init(void)
+void __cpuinit sn_cpu_init(void)
{
int cpuid;
int cpuphyid;
int slice;
int cnode;
int i;
- static int wars_have_been_checked;
+ static int wars_have_been_checked, set_cpu0_number;
- if (smp_processor_id() == 0 && IS_MEDUSA()) {
+ cpuid = smp_processor_id();
+ if (cpuid == 0 && IS_MEDUSA()) {
if (ia64_sn_is_fake_prom())
sn_prom_type = 2;
else
sn_prom_type = 1;
- printk("Running on medusa with %s PROM\n", (sn_prom_type == 1) ? "real" : "fake");
+ printk(KERN_INFO "Running on medusa with %s PROM\n",
+ (sn_prom_type == 1) ? "real" : "fake");
}
memset(pda, 0, sizeof(pda));
- if (ia64_sn_get_sn_info(0, &sn_hub_info->shub2, &sn_hub_info->nasid_bitmask, &sn_hub_info->nasid_shift,
- &sn_system_size, &sn_sharing_domain_size, &sn_partition_id,
- &sn_coherency_id, &sn_region_size))
+ if (ia64_sn_get_sn_info(0, &sn_hub_info->shub2,
+ &sn_hub_info->nasid_bitmask,
+ &sn_hub_info->nasid_shift,
+ &sn_system_size, &sn_sharing_domain_size,
+ &sn_partition_id, &sn_coherency_id,
+ &sn_region_size))
BUG();
sn_hub_info->as_shift = sn_hub_info->nasid_shift - 2;
/*
+ * Don't check status. The SAL call is not supported on all PROMs
+ * but a failure is harmless.
+ * Architechtuallly, cpu_init is always called twice on cpu 0. We
+ * should set cpu_number on cpu 0 once.
+ */
+ if (cpuid == 0) {
+ if (!set_cpu0_number) {
+ (void) ia64_sn_set_cpu_number(cpuid);
+ set_cpu0_number = 1;
+ }
+ } else
+ (void) ia64_sn_set_cpu_number(cpuid);
+
+ /*
* The boot cpu makes this call again after platform initialization is
* complete.
*/
if (ia64_sn_get_prom_feature_set(i, &sn_prom_features[i]) != 0)
break;
- cpuid = smp_processor_id();
cpuphyid = get_sapicid();
if (ia64_sn_get_sapic_info(cpuphyid, &nasid, &subnode, &slice))
SH2_PIO_WRITE_STATUS_1, SH2_PIO_WRITE_STATUS_3};
u64 *pio;
pio = is_shub1() ? pio1 : pio2;
- pda->pio_write_status_addr = (volatile unsigned long *) LOCAL_MMR_ADDR(pio[slice]);
+ pda->pio_write_status_addr =
+ (volatile unsigned long *)GLOBAL_MMR_ADDR(nasid, pio[slice]);
pda->pio_write_status_val = is_shub1() ? SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_MASK : 0;
}
* cnode == node for all C & M bricks.
*/
for_each_online_node(node) {
- nasid = pxm_to_nasid(nid_to_pxm_map[node]);
+ nasid = pxm_to_nasid(node_to_pxm(node));
sn_cnodeid_to_nasid[node] = nasid;
physical_node_map[nasid] = node;
}
for_each_online_node(node) {
kl_config_hdr_t *klgraph_header;
nasid = cnodeid_to_nasid(node);
- if ((klgraph_header = ia64_sn_get_klconfig_addr(nasid)) == NULL)
- BUG();
+ klgraph_header = ia64_sn_get_klconfig_addr(nasid);
+ BUG_ON(klgraph_header == NULL);
brd = NODE_OFFSET_TO_LBOARD(nasid, klgraph_header->ch_board_info);
while (brd) {
if (board_needs_cnode(brd->brd_type) && physical_node_map[brd->brd_nasid] < 0) {
{
long cpu;
- for (cpu=0; cpu < NR_CPUS; cpu++)
+ for (cpu = 0; cpu < nr_cpu_ids; cpu++)
if (cpuid_to_nasid(cpu) == nasid &&
cpuid_to_slice(cpu) == slice)
return cpu;
return 0;
return test_bit(id, sn_prom_features);
}
+
+void
+sn_kernel_launch_event(void)
+{
+ /* ignore status until we understand possible failure, if any*/
+ if (ia64_sn_kernel_launch_event())
+ printk(KERN_ERR "KEXEC is not supported in this PROM, Please update the PROM.\n");
+}
EXPORT_SYMBOL(sn_prom_feature_available);