* Derived from i386 and Alpha versions.
*/
-#include <linux/config.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/ptrace.h>
+#include <linux/tracehook.h>
#include <linux/sched.h>
#include <linux/signal.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/stddef.h>
#include <linux/tty.h>
#include <linux/binfmts.h>
# define GET_SIGSET(k,u) __get_user((k)->sig[0], &(u)->sig[0])
#endif
-long
-ia64_rt_sigsuspend (sigset_t __user *uset, size_t sigsetsize, struct sigscratch *scr)
-{
- sigset_t oldset, set;
-
- /* XXX: Don't preclude handling different sized sigset_t's. */
- if (sigsetsize != sizeof(sigset_t))
- return -EINVAL;
-
- if (!access_ok(VERIFY_READ, uset, sigsetsize))
- return -EFAULT;
-
- if (GET_SIGSET(&set, uset))
- return -EFAULT;
-
- sigdelsetmask(&set, ~_BLOCKABLE);
-
- spin_lock_irq(¤t->sighand->siglock);
- {
- oldset = current->blocked;
- current->blocked = set;
- recalc_sigpending();
- }
- spin_unlock_irq(¤t->sighand->siglock);
-
- /*
- * The return below usually returns to the signal handler. We need to
- * pre-set the correct error code here to ensure that the right values
- * get saved in sigcontext by ia64_do_signal.
- */
- scr->pt.r8 = EINTR;
- scr->pt.r10 = -1;
-
- while (1) {
- current->state = TASK_INTERRUPTIBLE;
- schedule();
- if (ia64_do_signal(&oldset, scr, 1))
- return -EINTR;
- }
-}
-
asmlinkage long
sys_sigaltstack (const stack_t __user *uss, stack_t __user *uoss, long arg2,
long arg3, long arg4, long arg5, long arg6, long arg7,
if ((flags & IA64_SC_FLAG_FPH_VALID) != 0) {
struct ia64_psr *psr = ia64_psr(&scr->pt);
- __copy_from_user(current->thread.fph, &sc->sc_fr[32], 96*16);
+ err |= __copy_from_user(current->thread.fph, &sc->sc_fr[32], 96*16);
psr->mfh = 0; /* drop signal handler's fph contents... */
preempt_disable();
if (psr->dfh)
si.si_signo = SIGSEGV;
si.si_errno = 0;
si.si_code = SI_KERNEL;
- si.si_pid = current->pid;
- si.si_uid = current->uid;
+ si.si_pid = task_pid_vnr(current);
+ si.si_uid = current_uid();
si.si_addr = sc;
force_sig_info(SIGSEGV, &si, current);
return retval;
setup_sigcontext (struct sigcontext __user *sc, sigset_t *mask, struct sigscratch *scr)
{
unsigned long flags = 0, ifs, cfm, nat;
- long err;
+ long err = 0;
ifs = scr->pt.cr_ifs;
ia64_flush_fph(current);
if ((current->thread.flags & IA64_THREAD_FPH_VALID)) {
flags |= IA64_SC_FLAG_FPH_VALID;
- __copy_to_user(&sc->sc_fr[32], current->thread.fph, 96*16);
+ err = __copy_to_user(&sc->sc_fr[32], current->thread.fph, 96*16);
}
nat = ia64_get_scratch_nat_bits(&scr->pt, scr->scratch_unat);
- err = __put_user(flags, &sc->sc_flags);
+ err |= __put_user(flags, &sc->sc_flags);
err |= __put_user(nat, &sc->sc_nat);
err |= PUT_SIGSET(mask, &sc->sc_mask);
err |= __put_user(cfm, &sc->sc_cfm);
err |= __copy_to_user(&sc->sc_gr[15], &scr->pt.r15, 8); /* r15 */
err |= __put_user(scr->pt.cr_iip + ia64_psr(&scr->pt)->ri, &sc->sc_ip);
- if (flags & IA64_SC_FLAG_IN_SYSCALL) {
- /* Clear scratch registers if the signal interrupted a system call. */
- err |= __put_user(0, &sc->sc_ar_ccv); /* ar.ccv */
- err |= __put_user(0, &sc->sc_br[7]); /* b7 */
- err |= __put_user(0, &sc->sc_gr[14]); /* r14 */
- err |= __clear_user(&sc->sc_ar25, 2*8); /* ar.csd & ar.ssd */
- err |= __clear_user(&sc->sc_gr[2], 2*8); /* r2-r3 */
- err |= __clear_user(&sc->sc_gr[16], 16*8); /* r16-r31 */
- } else {
+ if (!(flags & IA64_SC_FLAG_IN_SYSCALL)) {
/* Copy scratch regs to sigcontext if the signal didn't interrupt a syscall. */
err |= __put_user(scr->pt.ar_ccv, &sc->sc_ar_ccv); /* ar.ccv */
err |= __put_user(scr->pt.b7, &sc->sc_br[7]); /* b7 */
si.si_signo = SIGSEGV;
si.si_errno = 0;
si.si_code = SI_KERNEL;
- si.si_pid = current->pid;
- si.si_uid = current->uid;
+ si.si_pid = task_pid_vnr(current);
+ si.si_uid = current_uid();
si.si_addr = addr;
force_sig_info(SIGSEGV, &si, current);
return 0;
struct sigscratch *scr)
{
extern char __kernel_sigtramp[];
- unsigned long tramp_addr, new_rbs = 0;
+ unsigned long tramp_addr, new_rbs = 0, new_sp;
struct sigframe __user *frame;
long err;
- frame = (void __user *) scr->pt.r12;
+ new_sp = scr->pt.r12;
tramp_addr = (unsigned long) __kernel_sigtramp;
- if ((ka->sa.sa_flags & SA_ONSTACK) && sas_ss_flags((unsigned long) frame) == 0) {
- frame = (void __user *) ((current->sas_ss_sp + current->sas_ss_size)
- & ~(STACK_ALIGN - 1));
- /*
- * We need to check for the register stack being on the signal stack
- * separately, because it's switched separately (memory stack is switched
- * in the kernel, register stack is switched in the signal trampoline).
- */
- if (!rbs_on_sig_stack(scr->pt.ar_bspstore))
- new_rbs = (current->sas_ss_sp + sizeof(long) - 1) & ~(sizeof(long) - 1);
+ if (ka->sa.sa_flags & SA_ONSTACK) {
+ int onstack = sas_ss_flags(new_sp);
+
+ if (onstack == 0) {
+ new_sp = current->sas_ss_sp + current->sas_ss_size;
+ /*
+ * We need to check for the register stack being on the
+ * signal stack separately, because it's switched
+ * separately (memory stack is switched in the kernel,
+ * register stack is switched in the signal trampoline).
+ */
+ if (!rbs_on_sig_stack(scr->pt.ar_bspstore))
+ new_rbs = ALIGN(current->sas_ss_sp,
+ sizeof(long));
+ } else if (onstack == SS_ONSTACK) {
+ unsigned long check_sp;
+
+ /*
+ * If we are on the alternate signal stack and would
+ * overflow it, don't. Return an always-bogus address
+ * instead so we will die with SIGSEGV.
+ */
+ check_sp = (new_sp - sizeof(*frame)) & -STACK_ALIGN;
+ if (!likely(on_sig_stack(check_sp)))
+ return force_sigsegv_info(sig, (void __user *)
+ check_sp);
+ }
}
- frame = (void __user *) frame - ((sizeof(*frame) + STACK_ALIGN - 1) & ~(STACK_ALIGN - 1));
+ frame = (void __user *) ((new_sp - sizeof(*frame)) & -STACK_ALIGN);
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
return force_sigsegv_info(sig, frame);
if (!setup_frame(sig, ka, info, oldset, scr))
return 0;
- if (!(ka->sa.sa_flags & SA_NODEFER)) {
- spin_lock_irq(¤t->sighand->siglock);
- {
- sigorsets(¤t->blocked, ¤t->blocked, &ka->sa.sa_mask);
- sigaddset(¤t->blocked, sig);
- recalc_sigpending();
- }
- spin_unlock_irq(¤t->sighand->siglock);
- }
+ spin_lock_irq(¤t->sighand->siglock);
+ sigorsets(¤t->blocked, ¤t->blocked, &ka->sa.sa_mask);
+ if (!(ka->sa.sa_flags & SA_NODEFER))
+ sigaddset(¤t->blocked, sig);
+ recalc_sigpending();
+ spin_unlock_irq(¤t->sighand->siglock);
+
+ /*
+ * Let tracing know that we've done the handler setup.
+ */
+ tracehook_signal_handler(sig, info, ka, &scr->pt,
+ test_thread_flag(TIF_SINGLESTEP));
+
return 1;
}
* Note that `init' is a special process: it doesn't get signals it doesn't want to
* handle. Thus you cannot kill init even with a SIGKILL even by mistake.
*/
-long
-ia64_do_signal (sigset_t *oldset, struct sigscratch *scr, long in_syscall)
+void
+ia64_do_signal (struct sigscratch *scr, long in_syscall)
{
struct k_sigaction ka;
+ sigset_t *oldset;
siginfo_t info;
long restart = in_syscall;
long errno = scr->pt.r8;
* doing anything if so.
*/
if (!user_mode(&scr->pt))
- return 0;
+ return;
- if (!oldset)
+ if (current_thread_info()->status & TS_RESTORE_SIGMASK)
+ oldset = ¤t->saved_sigmask;
+ else
oldset = ¤t->blocked;
/*
* Whee! Actually deliver the signal. If the delivery failed, we need to
* continue to iterate in this loop so we can deliver the SIGSEGV...
*/
- if (handle_signal(signr, &ka, &info, oldset, scr))
- return 1;
+ if (handle_signal(signr, &ka, &info, oldset, scr)) {
+ /*
+ * A signal was successfully delivered; the saved
+ * sigmask will have been stored in the signal frame,
+ * and will be restored by sigreturn, so we can simply
+ * clear the TS_RESTORE_SIGMASK flag.
+ */
+ current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
+ return;
+ }
}
/* Did we come from a system call? */
}
}
}
- return 0;
-}
-
-/* Set a delayed signal that was detected in MCA/INIT/NMI/PMI context where it
- * could not be delivered. It is important that the target process is not
- * allowed to do any more work in user space. Possible cases for the target
- * process:
- *
- * - It is sleeping and will wake up soon. Store the data in the current task,
- * the signal will be sent when the current task returns from the next
- * interrupt.
- *
- * - It is running in user context. Store the data in the current task, the
- * signal will be sent when the current task returns from the next interrupt.
- *
- * - It is running in kernel context on this or another cpu and will return to
- * user context. Store the data in the target task, the signal will be sent
- * to itself when the target task returns to user space.
- *
- * - It is running in kernel context on this cpu and will sleep before
- * returning to user context. Because this is also the current task, the
- * signal will not get delivered and the task could sleep indefinitely.
- * Store the data in the idle task for this cpu, the signal will be sent
- * after the idle task processes its next interrupt.
- *
- * To cover all cases, store the data in the target task, the current task and
- * the idle task on this cpu. Whatever happens, the signal will be delivered
- * to the target task before it can do any useful user space work. Multiple
- * deliveries have no unwanted side effects.
- *
- * Note: This code is executed in MCA/INIT/NMI/PMI context, with interrupts
- * disabled. It must not take any locks nor use kernel structures or services
- * that require locks.
- */
-/* To ensure that we get the right pid, check its start time. To avoid extra
- * include files in thread_info.h, convert the task start_time to unsigned long,
- * giving us a cycle time of > 580 years.
- */
-static inline unsigned long
-start_time_ul(const struct task_struct *t)
-{
- return t->start_time.tv_sec * NSEC_PER_SEC + t->start_time.tv_nsec;
-}
-
-void
-set_sigdelayed(pid_t pid, int signo, int code, void __user *addr)
-{
- struct task_struct *t;
- unsigned long start_time = 0;
- int i;
-
- for (i = 1; i <= 3; ++i) {
- switch (i) {
- case 1:
- t = find_task_by_pid(pid);
- if (t)
- start_time = start_time_ul(t);
- break;
- case 2:
- t = current;
- break;
- default:
- t = idle_task(smp_processor_id());
- break;
- }
-
- if (!t)
- return;
- t->thread_info->sigdelayed.signo = signo;
- t->thread_info->sigdelayed.code = code;
- t->thread_info->sigdelayed.addr = addr;
- t->thread_info->sigdelayed.start_time = start_time;
- t->thread_info->sigdelayed.pid = pid;
- wmb();
- set_tsk_thread_flag(t, TIF_SIGDELAYED);
+ /* if there's no signal to deliver, we just put the saved sigmask
+ * back */
+ if (current_thread_info()->status & TS_RESTORE_SIGMASK) {
+ current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
+ sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
}
}
-
-/* Called from entry.S when it detects TIF_SIGDELAYED, a delayed signal that
- * was detected in MCA/INIT/NMI/PMI context where it could not be delivered.
- */
-
-void
-do_sigdelayed(void)
-{
- struct siginfo siginfo;
- pid_t pid;
- struct task_struct *t;
-
- clear_thread_flag(TIF_SIGDELAYED);
- memset(&siginfo, 0, sizeof(siginfo));
- siginfo.si_signo = current_thread_info()->sigdelayed.signo;
- siginfo.si_code = current_thread_info()->sigdelayed.code;
- siginfo.si_addr = current_thread_info()->sigdelayed.addr;
- pid = current_thread_info()->sigdelayed.pid;
- t = find_task_by_pid(pid);
- if (!t)
- return;
- if (current_thread_info()->sigdelayed.start_time != start_time_ul(t))
- return;
- force_sig_info(siginfo.si_signo, &siginfo, t);
-}