#include <asm/mca.h>
#include <asm/meminit.h>
#include <asm/page.h>
+#include <asm/paravirt.h>
+#include <asm/paravirt_patch.h>
#include <asm/patch.h>
#include <asm/pgtable.h>
#include <asm/processor.h>
#include <asm/setup.h>
#include <asm/smp.h>
#include <asm/system.h>
+#include <asm/tlbflush.h>
#include <asm/unistd.h>
#include <asm/hpsim.h>
EXPORT_SYMBOL(__per_cpu_offset);
#endif
-extern void ia64_setup_printk_clock(void);
-
-DEFINE_PER_CPU(struct cpuinfo_ia64, cpu_info);
+DEFINE_PER_CPU(struct cpuinfo_ia64, ia64_cpu_info);
DEFINE_PER_CPU(unsigned long, local_per_cpu_offset);
unsigned long ia64_cycles_per_usec;
struct ia64_boot_param *ia64_boot_param;
.name = "Kernel code",
.flags = IORESOURCE_BUSY | IORESOURCE_MEM
};
-extern char _text[], _end[], _etext[];
+
+static struct resource bss_resource = {
+ .name = "Kernel bss",
+ .flags = IORESOURCE_BUSY | IORESOURCE_MEM
+};
unsigned long ia64_max_cacheline_size;
*/
#define I_CACHE_STRIDE_SHIFT 5 /* Safest way to go: 32 bytes by 32 bytes */
unsigned long ia64_i_cache_stride_shift = ~0;
+/*
+ * "clflush_cache_range()" needs to know what processor dependent stride size to
+ * use when it flushes cache lines including both d-cache and i-cache.
+ */
+/* Safest way to go: 32 bytes by 32 bytes */
+#define CACHE_STRIDE_SHIFT 5
+unsigned long ia64_cache_stride_shift = ~0;
/*
* The merge_mask variable needs to be set to (max(iommu_page_size(iommu)) - 1). This
* This routine does not assume the incoming segments are sorted.
*/
int __init
-filter_rsvd_memory (unsigned long start, unsigned long end, void *arg)
+filter_rsvd_memory (u64 start, u64 end, void *arg)
{
- unsigned long range_start, range_end, prev_start;
+ u64 range_start, range_end, prev_start;
void (*func)(unsigned long, unsigned long, int);
int i;
return 0;
}
+/*
+ * Similar to "filter_rsvd_memory()", but the reserved memory ranges
+ * are not filtered out.
+ */
+int __init
+filter_memory(u64 start, u64 end, void *arg)
+{
+ void (*func)(unsigned long, unsigned long, int);
+
+#if IGNORE_PFN0
+ if (start == PAGE_OFFSET) {
+ printk(KERN_WARNING "warning: skipping physical page 0\n");
+ start += PAGE_SIZE;
+ if (start >= end)
+ return 0;
+ }
+#endif
+ func = arg;
+ if (start < end)
+ call_pernode_memory(__pa(start), end - start, func);
+ return 0;
+}
+
static void __init
sort_regions (struct rsvd_region *rsvd_region, int max)
{
code_resource.start = ia64_tpa(_text);
code_resource.end = ia64_tpa(_etext) - 1;
data_resource.start = ia64_tpa(_etext);
- data_resource.end = ia64_tpa(_end) - 1;
- efi_initialize_iomem_resources(&code_resource, &data_resource);
+ data_resource.end = ia64_tpa(_edata) - 1;
+ bss_resource.start = ia64_tpa(__bss_start);
+ bss_resource.end = ia64_tpa(_end) - 1;
+ efi_initialize_iomem_resources(&code_resource, &data_resource,
+ &bss_resource);
return 0;
}
__initcall(register_memory);
+
+#ifdef CONFIG_KEXEC
+
+/*
+ * This function checks if the reserved crashkernel is allowed on the specific
+ * IA64 machine flavour. Machines without an IO TLB use swiotlb and require
+ * some memory below 4 GB (i.e. in 32 bit area), see the implementation of
+ * lib/swiotlb.c. The hpzx1 architecture has an IO TLB but cannot use that
+ * in kdump case. See the comment in sba_init() in sba_iommu.c.
+ *
+ * So, the only machvec that really supports loading the kdump kernel
+ * over 4 GB is "sn2".
+ */
+static int __init check_crashkernel_memory(unsigned long pbase, size_t size)
+{
+ if (ia64_platform_is("sn2") || ia64_platform_is("uv"))
+ return 1;
+ else
+ return pbase < (1UL << 32);
+}
+
+static void __init setup_crashkernel(unsigned long total, int *n)
+{
+ unsigned long long base = 0, size = 0;
+ int ret;
+
+ ret = parse_crashkernel(boot_command_line, total,
+ &size, &base);
+ if (ret == 0 && size > 0) {
+ if (!base) {
+ sort_regions(rsvd_region, *n);
+ base = kdump_find_rsvd_region(size,
+ rsvd_region, *n);
+ }
+
+ if (!check_crashkernel_memory(base, size)) {
+ pr_warning("crashkernel: There would be kdump memory "
+ "at %ld GB but this is unusable because it "
+ "must\nbe below 4 GB. Change the memory "
+ "configuration of the machine.\n",
+ (unsigned long)(base >> 30));
+ return;
+ }
+
+ if (base != ~0UL) {
+ printk(KERN_INFO "Reserving %ldMB of memory at %ldMB "
+ "for crashkernel (System RAM: %ldMB)\n",
+ (unsigned long)(size >> 20),
+ (unsigned long)(base >> 20),
+ (unsigned long)(total >> 20));
+ rsvd_region[*n].start =
+ (unsigned long)__va(base);
+ rsvd_region[*n].end =
+ (unsigned long)__va(base + size);
+ (*n)++;
+ crashk_res.start = base;
+ crashk_res.end = base + size - 1;
+ }
+ }
+ efi_memmap_res.start = ia64_boot_param->efi_memmap;
+ efi_memmap_res.end = efi_memmap_res.start +
+ ia64_boot_param->efi_memmap_size;
+ boot_param_res.start = __pa(ia64_boot_param);
+ boot_param_res.end = boot_param_res.start +
+ sizeof(*ia64_boot_param);
+}
+#else
+static inline void __init setup_crashkernel(unsigned long total, int *n)
+{}
+#endif
+
/**
* reserve_memory - setup reserved memory areas
*
* Setup the reserved memory areas set aside for the boot parameters,
* initrd, etc. There are currently %IA64_MAX_RSVD_REGIONS defined,
- * see include/asm-ia64/meminit.h if you need to define more.
+ * see arch/ia64/include/asm/meminit.h if you need to define more.
*/
void __init
reserve_memory (void)
{
int n = 0;
+ unsigned long total_memory;
/*
* none of the entries in this table overlap
rsvd_region[n].end = (unsigned long) ia64_imva(_end);
n++;
+ n += paravirt_reserve_memory(&rsvd_region[n]);
+
#ifdef CONFIG_BLK_DEV_INITRD
if (ia64_boot_param->initrd_start) {
rsvd_region[n].start = (unsigned long)__va(ia64_boot_param->initrd_start);
}
#endif
-#ifdef CONFIG_PROC_VMCORE
+#ifdef CONFIG_CRASH_DUMP
if (reserve_elfcorehdr(&rsvd_region[n].start,
&rsvd_region[n].end) == 0)
n++;
#endif
- efi_memmap_init(&rsvd_region[n].start, &rsvd_region[n].end);
+ total_memory = efi_memmap_init(&rsvd_region[n].start, &rsvd_region[n].end);
n++;
-#ifdef CONFIG_KEXEC
- /* crashkernel=size@offset specifies the size to reserve for a crash
- * kernel. If offset is 0, then it is determined automatically.
- * By reserving this memory we guarantee that linux never set's it
- * up as a DMA target.Useful for holding code to do something
- * appropriate after a kernel panic.
- */
- {
- char *from = strstr(boot_command_line, "crashkernel=");
- unsigned long base, size;
- if (from) {
- size = memparse(from + 12, &from);
- if (*from == '@')
- base = memparse(from+1, &from);
- else
- base = 0;
- if (size) {
- if (!base) {
- sort_regions(rsvd_region, n);
- base = kdump_find_rsvd_region(size,
- rsvd_region, n);
- }
- if (base != ~0UL) {
- rsvd_region[n].start =
- (unsigned long)__va(base);
- rsvd_region[n].end =
- (unsigned long)__va(base + size);
- n++;
- crashk_res.start = base;
- crashk_res.end = base + size - 1;
- }
- }
- }
- efi_memmap_res.start = ia64_boot_param->efi_memmap;
- efi_memmap_res.end = efi_memmap_res.start +
- ia64_boot_param->efi_memmap_size;
- boot_param_res.start = __pa(ia64_boot_param);
- boot_param_res.end = boot_param_res.start +
- sizeof(*ia64_boot_param);
- }
-#endif
+ setup_crashkernel(total_memory, &n);
+
/* end of memory marker */
rsvd_region[n].start = ~0UL;
rsvd_region[n].end = ~0UL;
initrd_start = (unsigned long)__va(ia64_boot_param->initrd_start);
initrd_end = initrd_start+ia64_boot_param->initrd_size;
- printk(KERN_INFO "Initial ramdisk at: 0x%lx (%lu bytes)\n",
+ printk(KERN_INFO "Initial ramdisk at: 0x%lx (%llu bytes)\n",
initrd_start, ia64_boot_param->initrd_size);
}
#endif
#endif
}
-#ifdef CONFIG_SMP
-static void __init
-check_for_logical_procs (void)
-{
- pal_logical_to_physical_t info;
- s64 status;
-
- status = ia64_pal_logical_to_phys(0, &info);
- if (status == -1) {
- printk(KERN_INFO "No logical to physical processor mapping "
- "available\n");
- return;
- }
- if (status) {
- printk(KERN_ERR "ia64_pal_logical_to_phys failed with %ld\n",
- status);
- return;
- }
- /*
- * Total number of siblings that BSP has. Though not all of them
- * may have booted successfully. The correct number of siblings
- * booted is in info.overview_num_log.
- */
- smp_num_siblings = info.overview_tpc;
- smp_num_cpucores = info.overview_cpp;
-}
-#endif
-
static __initdata int nomca;
static __init int setup_nomca(char *s)
{
}
early_param("nomca", setup_nomca);
-#ifdef CONFIG_PROC_VMCORE
+/*
+ * Note: elfcorehdr_addr is not just limited to vmcore. It is also used by
+ * is_kdump_kernel() to determine if we are booting after a panic. Hence
+ * ifdef it under CONFIG_CRASH_DUMP and not CONFIG_PROC_VMCORE.
+ */
+#ifdef CONFIG_CRASH_DUMP
/* elfcorehdr= specifies the location of elf core header
* stored by the crashed kernel.
*/
}
early_param("elfcorehdr", parse_elfcorehdr);
-int __init reserve_elfcorehdr(unsigned long *start, unsigned long *end)
+int __init reserve_elfcorehdr(u64 *start, u64 *end)
{
- unsigned long length;
+ u64 length;
/* We get the address using the kernel command line,
* but the size is extracted from the EFI tables.
* to work properly.
*/
- if (elfcorehdr_addr >= ELFCORE_ADDR_MAX)
+ if (!is_vmcore_usable())
return -EINVAL;
if ((length = vmcore_find_descriptor_size(elfcorehdr_addr)) == 0) {
- elfcorehdr_addr = ELFCORE_ADDR_MAX;
+ vmcore_unusable();
return -EINVAL;
}
{
unw_init();
+ paravirt_arch_setup_early();
+
ia64_patch_vtop((u64) __start___vtop_patchlist, (u64) __end___vtop_patchlist);
+ paravirt_patch_apply();
*cmdline_p = __va(ia64_boot_param->command_line);
strlcpy(boot_command_line, *cmdline_p, COMMAND_LINE_SIZE);
#ifdef CONFIG_ACPI
/* Initialize the ACPI boot-time table parser */
acpi_table_init();
+ early_acpi_boot_init();
# ifdef CONFIG_ACPI_NUMA
acpi_numa_init();
-# endif
-#else
-# ifdef CONFIG_SMP
- smp_build_cpu_map(); /* happens, e.g., with the Ski simulator */
+# ifdef CONFIG_ACPI_HOTPLUG_CPU
+ prefill_possible_map();
+# endif
+ per_cpu_scan_finalize((cpus_weight(early_cpu_possible_map) == 0 ?
+ 32 : cpus_weight(early_cpu_possible_map)),
+ additional_cpus > 0 ? additional_cpus : 0);
# endif
#endif /* CONFIG_APCI_BOOT */
+#ifdef CONFIG_SMP
+ smp_build_cpu_map();
+#endif
find_memory();
/* process SAL system table: */
ia64_sal_init(__va(efi.sal_systab));
- ia64_setup_printk_clock();
+#ifdef CONFIG_ITANIUM
+ ia64_patch_rse((u64) __start___rse_patchlist, (u64) __end___rse_patchlist);
+#else
+ {
+ unsigned long num_phys_stacked;
+
+ if (ia64_pal_rse_info(&num_phys_stacked, 0) == 0 && num_phys_stacked > 96)
+ ia64_patch_rse((u64) __start___rse_patchlist, (u64) __end___rse_patchlist);
+ }
+#endif
#ifdef CONFIG_SMP
cpu_physical_id(0) = hard_smp_processor_id();
- check_for_logical_procs();
- if (smp_num_cpucores > 1)
- printk(KERN_INFO
- "cpu package is Multi-Core capable: number of cores=%d\n",
- smp_num_cpucores);
- if (smp_num_siblings > 1)
- printk(KERN_INFO
- "cpu package is Multi-Threading capable: number of siblings=%d\n",
- smp_num_siblings);
#endif
cpu_init(); /* initialize the bootstrap CPU */
mmu_context_init(); /* initialize context_id bitmap */
- check_sal_cache_flush();
-
#ifdef CONFIG_ACPI
acpi_boot_init();
#endif
+ paravirt_banner();
+ paravirt_arch_setup_console(cmdline_p);
+
#ifdef CONFIG_VT
if (!conswitchp) {
# if defined(CONFIG_DUMMY_CONSOLE)
#endif
/* enable IA-64 Machine Check Abort Handling unless disabled */
+ if (paravirt_arch_setup_nomca())
+ nomca = 1;
if (!nomca)
ia64_mca_init();
platform_setup(cmdline_p);
+#ifndef CONFIG_IA64_HP_SIM
+ check_sal_cache_flush();
+#endif
paging_init();
}
lpj*HZ/500000, (lpj*HZ/5000) % 100);
#ifdef CONFIG_SMP
seq_printf(m, "siblings : %u\n", cpus_weight(cpu_core_map[cpunum]));
+ if (c->socket_id != -1)
+ seq_printf(m, "physical id: %u\n", c->socket_id);
if (c->threads_per_core > 1 || c->cores_per_socket > 1)
seq_printf(m,
- "physical id: %u\n"
- "core id : %u\n"
- "thread id : %u\n",
- c->socket_id, c->core_id, c->thread_id);
+ "core id : %u\n"
+ "thread id : %u\n",
+ c->core_id, c->thread_id);
#endif
seq_printf(m,"\n");
c_start (struct seq_file *m, loff_t *pos)
{
#ifdef CONFIG_SMP
- while (*pos < NR_CPUS && !cpu_isset(*pos, cpu_online_map))
+ while (*pos < nr_cpu_ids && !cpu_online(*pos))
++*pos;
#endif
- return *pos < NR_CPUS ? cpu_data(*pos) : NULL;
+ return *pos < nr_cpu_ids ? cpu_data(*pos) : NULL;
}
static void *
{
}
-struct seq_operations cpuinfo_op = {
+const struct seq_operations cpuinfo_op = {
.start = c_start,
.next = c_next,
.stop = c_stop,
if (overflow++ == 0)
printk(KERN_ERR
"%s: Table overflow. Some processor model information will be missing\n",
- __FUNCTION__);
+ __func__);
return "Unknown";
}
c->socket_id = -1;
identify_siblings(c);
+
+ if (c->threads_per_core > smp_num_siblings)
+ smp_num_siblings = c->threads_per_core;
#endif
c->ppn = cpuid.field.ppn;
c->number = cpuid.field.number;
c->unimpl_pa_mask = ~((1L<<63) | ((1L << phys_addr_size) - 1));
}
-void __init
-setup_per_cpu_areas (void)
-{
- /* start_kernel() requires this... */
-#ifdef CONFIG_ACPI_HOTPLUG_CPU
- prefill_possible_map();
-#endif
-}
-
/*
- * Calculate the max. cache line size.
+ * Do the following calculations:
*
- * In addition, the minimum of the i-cache stride sizes is calculated for
- * "flush_icache_range()".
+ * 1. the max. cache line size.
+ * 2. the minimum of the i-cache stride sizes for "flush_icache_range()".
+ * 3. the minimum of the cache stride sizes for "clflush_cache_range()".
*/
static void __cpuinit
-get_max_cacheline_size (void)
+get_cache_info(void)
{
unsigned long line_size, max = 1;
- u64 l, levels, unique_caches;
- pal_cache_config_info_t cci;
- s64 status;
+ unsigned long l, levels, unique_caches;
+ pal_cache_config_info_t cci;
+ long status;
status = ia64_pal_cache_summary(&levels, &unique_caches);
if (status != 0) {
printk(KERN_ERR "%s: ia64_pal_cache_summary() failed (status=%ld)\n",
- __FUNCTION__, status);
+ __func__, status);
max = SMP_CACHE_BYTES;
/* Safest setup for "flush_icache_range()" */
ia64_i_cache_stride_shift = I_CACHE_STRIDE_SHIFT;
+ /* Safest setup for "clflush_cache_range()" */
+ ia64_cache_stride_shift = CACHE_STRIDE_SHIFT;
goto out;
}
for (l = 0; l < levels; ++l) {
- status = ia64_pal_cache_config_info(l, /* cache_type (data_or_unified)= */ 2,
- &cci);
+ /* cache_type (data_or_unified)=2 */
+ status = ia64_pal_cache_config_info(l, 2, &cci);
if (status != 0) {
- printk(KERN_ERR
- "%s: ia64_pal_cache_config_info(l=%lu, 2) failed (status=%ld)\n",
- __FUNCTION__, l, status);
+ printk(KERN_ERR "%s: ia64_pal_cache_config_info"
+ "(l=%lu, 2) failed (status=%ld)\n",
+ __func__, l, status);
max = SMP_CACHE_BYTES;
/* The safest setup for "flush_icache_range()" */
cci.pcci_stride = I_CACHE_STRIDE_SHIFT;
+ /* The safest setup for "clflush_cache_range()" */
+ ia64_cache_stride_shift = CACHE_STRIDE_SHIFT;
cci.pcci_unified = 1;
+ } else {
+ if (cci.pcci_stride < ia64_cache_stride_shift)
+ ia64_cache_stride_shift = cci.pcci_stride;
+
+ line_size = 1 << cci.pcci_line_size;
+ if (line_size > max)
+ max = line_size;
}
- line_size = 1 << cci.pcci_line_size;
- if (line_size > max)
- max = line_size;
+
if (!cci.pcci_unified) {
- status = ia64_pal_cache_config_info(l,
- /* cache_type (instruction)= */ 1,
- &cci);
+ /* cache_type (instruction)=1*/
+ status = ia64_pal_cache_config_info(l, 1, &cci);
if (status != 0) {
- printk(KERN_ERR
- "%s: ia64_pal_cache_config_info(l=%lu, 1) failed (status=%ld)\n",
- __FUNCTION__, l, status);
- /* The safest setup for "flush_icache_range()" */
+ printk(KERN_ERR "%s: ia64_pal_cache_config_info"
+ "(l=%lu, 1) failed (status=%ld)\n",
+ __func__, l, status);
+ /* The safest setup for flush_icache_range() */
cci.pcci_stride = I_CACHE_STRIDE_SHIFT;
}
}
if (smp_processor_id() == 0) {
cpu_set(0, per_cpu(cpu_sibling_map, 0));
cpu_set(0, cpu_core_map[0]);
+ } else {
+ /*
+ * Set ar.k3 so that assembly code in MCA handler can compute
+ * physical addresses of per cpu variables with a simple:
+ * phys = ar.k3 + &per_cpu_var
+ * and the alt-dtlb-miss handler can set per-cpu mapping into
+ * the TLB when needed. head.S already did this for cpu0.
+ */
+ ia64_set_kr(IA64_KR_PER_CPU_DATA,
+ ia64_tpa(cpu_data) - (long) __per_cpu_start);
}
#endif
- /*
- * We set ar.k3 so that assembly code in MCA handler can compute
- * physical addresses of per cpu variables with a simple:
- * phys = ar.k3 + &per_cpu_var
- */
- ia64_set_kr(IA64_KR_PER_CPU_DATA,
- ia64_tpa(cpu_data) - (long) __per_cpu_start);
-
- get_max_cacheline_size();
+ get_cache_info();
/*
* We can't pass "local_cpu_data" to identify_cpu() because we haven't called
* depends on the data returned by identify_cpu(). We break the dependency by
* accessing cpu_data() through the canonical per-CPU address.
*/
- cpu_info = cpu_data + ((char *) &__ia64_per_cpu_var(cpu_info) - __per_cpu_start);
+ cpu_info = cpu_data + ((char *) &__ia64_per_cpu_var(ia64_cpu_info) - __per_cpu_start);
identify_cpu(cpu_info);
#ifdef CONFIG_MCKINLEY
| IA64_DCR_DA | IA64_DCR_DD | IA64_DCR_LC));
atomic_inc(&init_mm.mm_count);
current->active_mm = &init_mm;
- if (current->mm)
- BUG();
+ BUG_ON(current->mm);
ia64_mmu_init(ia64_imva(cpu_data));
ia64_mca_cpu_init(ia64_imva(cpu_data));
#endif
/* set ia64_ctx.max_rid to the maximum RID that is supported by all CPUs: */
- if (ia64_pal_vm_summary(NULL, &vmi) == 0)
+ if (ia64_pal_vm_summary(NULL, &vmi) == 0) {
max_ctx = (1U << (vmi.pal_vm_info_2_s.rid_size - 3)) - 1;
- else {
+ setup_ptcg_sem(vmi.pal_vm_info_2_s.max_purges, NPTCG_FROM_PAL);
+ } else {
printk(KERN_WARNING "cpu_init: PAL VM summary failed, assuming 18 RID bits\n");
max_ctx = (1U << 15) - 1; /* use architected minimum */
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff