bool
default y
+config GENERIC_CMOS_UPDATE
+ bool
+ default y
+
+config CLOCKSOURCE_WATCHDOG
+ bool
+ default y
+
+config GENERIC_CLOCKEVENTS
+ bool
+ default y
+
+config GENERIC_CLOCKEVENTS_BROADCAST
+ bool
+ default y
+ depends on X86_LOCAL_APIC
+
config LOCKDEP_SUPPORT
bool
default y
bool
default y
+config QUICKLIST
+ bool
+ default y
+
config SBUS
bool
menu "Processor type and features"
+source "kernel/time/Kconfig"
+
config SMP
bool "Symmetric multi-processing support"
---help---
However, when run without a hypervisor the kernel is
theoretically slower. If in doubt, say N.
+source "arch/i386/xen/Kconfig"
+
config VMI
bool "VMI Paravirt-ops support"
depends on PARAVIRT
- default y
help
- VMI provides a paravirtualized interface to multiple hypervisors
- include VMware ESX server and Xen by connecting to a ROM module
+ VMI provides a paravirtualized interface to the VMware ESX server
+ (it could be used by other hypervisors in theory too, but is not
+ at the moment), by linking the kernel to a GPL-ed ROM module
provided by the hypervisor.
config ACPI_SRAT
this config is intended, is when reboot ends with a stalled/hung
system.
- Currently, the only fixup is for the Geode GX1/CS5530A/TROM2.1.
- combination.
+ Currently, the only fixup is for the Geode machines using
+ CS5530A and CS5536 chipsets.
Say Y if you want to enable the fixup. Currently, it's safe to
enable this option even if you don't need it.
config HIGHMEM64G
bool "64GB"
- depends on X86_CMPXCHG64
+ depends on !M386 && !M486
+ select X86_PAE
help
Select this if you have a 32-bit processor and more than 4
gigabytes of physical RAM.
config VMSPLIT_3G
bool "3G/1G user/kernel split"
config VMSPLIT_3G_OPT
- depends on !HIGHMEM
+ depends on !X86_PAE
bool "3G/1G user/kernel split (for full 1G low memory)"
config VMSPLIT_2G
bool "2G/2G user/kernel split"
+ config VMSPLIT_2G_OPT
+ depends on !X86_PAE
+ bool "2G/2G user/kernel split (for full 2G low memory)"
config VMSPLIT_1G
bool "1G/3G user/kernel split"
endchoice
config PAGE_OFFSET
hex
default 0xB0000000 if VMSPLIT_3G_OPT
- default 0x78000000 if VMSPLIT_2G
+ default 0x80000000 if VMSPLIT_2G
+ default 0x78000000 if VMSPLIT_2G_OPT
default 0x40000000 if VMSPLIT_1G
default 0xC0000000
default y
config X86_PAE
- bool
- depends on HIGHMEM64G
- default y
+ bool "PAE (Physical Address Extension) Support"
+ default n
+ depends on !HIGHMEM4G
select RESOURCES_64BIT
+ help
+ PAE is required for NX support, and furthermore enables
+ larger swapspace support for non-overcommit purposes. It
+ has the cost of more pagetable lookup overhead, and also
+ consumes more pagetable space per process.
# Common NUMA Features
config NUMA
config PHYSICAL_START
hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP)
+ default "0x1000000" if X86_NUMAQ
default "0x100000"
help
This gives the physical address where the kernel is loaded.
bool "Build a relocatable kernel(EXPERIMENTAL)"
depends on EXPERIMENTAL
help
- This build a kernel image that retains relocation information
+ This builds a kernel image that retains relocation information
so it can be loaded someplace besides the default 1MB.
- The relocations tend to the kernel binary about 10% larger,
+ The relocations tend to make the kernel binary about 10% larger,
but are discarded at runtime.
One use is for the kexec on panic case where the recovery kernel
Don't change this unless you know what you are doing.
config HOTPLUG_CPU
- bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
+ bool "Support for suspend on SMP and hot-pluggable CPUs (EXPERIMENTAL)"
depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER
---help---
Say Y here to experiment with turning CPUs off and on, and to
config COMPAT_VDSO
bool "Compat VDSO support"
default y
- depends on !PARAVIRT
help
Map the VDSO to the predictable old-style address too.
---help---
source "drivers/acpi/Kconfig"
-menu "APM (Advanced Power Management) BIOS Support"
-depends on PM && !X86_VISWS
-
-config APM
+menuconfig APM
tristate "APM (Advanced Power Management) BIOS support"
- depends on PM
+ depends on PM && !X86_VISWS
---help---
APM is a BIOS specification for saving power using several different
techniques. This is mostly useful for battery powered laptops with
To compile this driver as a module, choose M here: the
module will be called apm.
+if APM
+
config APM_IGNORE_USER_SUSPEND
bool "Ignore USER SUSPEND"
- depends on APM
help
This option will ignore USER SUSPEND requests. On machines with a
compliant APM BIOS, you want to say N. However, on the NEC Versa M
config APM_DO_ENABLE
bool "Enable PM at boot time"
- depends on APM
---help---
Enable APM features at boot time. From page 36 of the APM BIOS
specification: "When disabled, the APM BIOS does not automatically
config APM_CPU_IDLE
bool "Make CPU Idle calls when idle"
- depends on APM
help
Enable calls to APM CPU Idle/CPU Busy inside the kernel's idle loop.
On some machines, this can activate improved power savings, such as
config APM_DISPLAY_BLANK
bool "Enable console blanking using APM"
- depends on APM
help
Enable console blanking using the APM. Some laptops can use this to
turn off the LCD backlight when the screen blanker of the Linux
backlight at all, or it might print a lot of errors to the console,
especially if you are using gpm.
-config APM_RTC_IS_GMT
- bool "RTC stores time in GMT"
- depends on APM
- help
- Say Y here if your RTC (Real Time Clock a.k.a. hardware clock)
- stores the time in GMT (Greenwich Mean Time). Say N if your RTC
- stores localtime.
-
- It is in fact recommended to store GMT in your RTC, because then you
- don't have to worry about daylight savings time changes. The only
- reason not to use GMT in your RTC is if you also run a broken OS
- that doesn't understand GMT.
-
config APM_ALLOW_INTS
bool "Allow interrupts during APM BIOS calls"
- depends on APM
help
Normally we disable external interrupts while we are making calls to
the APM BIOS as a measure to lessen the effects of a badly behaving
config APM_REAL_MODE_POWER_OFF
bool "Use real mode APM BIOS call to power off"
- depends on APM
help
Use real mode APM BIOS calls to switch off the computer. This is
a work-around for a number of buggy BIOSes. Switch this option on if
your computer crashes instead of powering off properly.
-endmenu
+endif # APM
source "arch/i386/kernel/cpu/cpufreq/Kconfig"
bool "PCI support" if !X86_VISWS
depends on !X86_VOYAGER
default y if X86_VISWS
+ select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC)
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
source "fs/Kconfig"
-menu "Instrumentation Support"
+menuconfig INSTRUMENTATION
+ bool "Instrumentation Support"
depends on EXPERIMENTAL
+ default y
+
+if INSTRUMENTATION
source "arch/i386/oprofile/Kconfig"
config KPROBES
- bool "Kprobes (EXPERIMENTAL)"
- depends on KALLSYMS && EXPERIMENTAL && MODULES
+ bool "Kprobes"
+ depends on KALLSYMS && MODULES
help
Kprobes allows you to trap at almost any kernel address and
execute a callback function. register_kprobe() establishes
a probepoint and specifies the callback. Kprobes is useful
for kernel debugging, non-intrusive instrumentation and testing.
If in doubt, say "N".
-endmenu
+
+endif # INSTRUMENTATION
source "arch/i386/Kconfig.debug"
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff