bool
default y
+config LOCKDEP_SUPPORT
+ bool
+ default y
+
+config STACKTRACE_SUPPORT
+ bool
+ default y
+
config SEMAPHORE_SLEEPERS
bool
default y
In particular, it is needed for the x440.
If you don't have one of these computers, you should say N here.
+ If you want to build a NUMA kernel, you must select ACPI.
config X86_BIGSMP
bool "Support for other sub-arch SMP systems with more than 8 CPUs"
config X86_GENERICARCH
bool "Generic architecture (Summit, bigsmp, ES7000, default)"
- depends on SMP
help
This option compiles in the Summit, bigsmp, ES7000, default subarchitectures.
It is intended for a generic binary kernel.
+ If you want a NUMA kernel, select ACPI. We need SRAT for NUMA.
config X86_ES7000
bool "Support for Unisys ES7000 IA32 series"
config ACPI_SRAT
bool
default y
- depends on NUMA && (X86_SUMMIT || X86_GENERICARCH)
+ depends on ACPI && NUMA && (X86_SUMMIT || X86_GENERICARCH)
select ACPI_NUMA
config HAVE_ARCH_PARSE_SRAT
config SCHED_SMT
bool "SMT (Hyperthreading) scheduler support"
- depends on SMP
+ depends on X86_HT
help
SMT scheduler support improves the CPU scheduler's decision making
when dealing with Intel Pentium 4 chips with HyperThreading at a
config SCHED_MC
bool "Multi-core scheduler support"
- depends on SMP
+ depends on X86_HT
default y
help
Multi-core scheduler support improves the CPU scheduler's decision
config X86_UP_APIC
bool "Local APIC support on uniprocessors"
- depends on !SMP && !(X86_VISWS || X86_VOYAGER)
+ depends on !SMP && !(X86_VISWS || X86_VOYAGER || X86_GENERICARCH)
help
A local APIC (Advanced Programmable Interrupt Controller) is an
integrated interrupt controller in the CPU. If you have a single-CPU
config X86_LOCAL_APIC
bool
- depends on X86_UP_APIC || ((X86_VISWS || SMP) && !X86_VOYAGER)
+ depends on X86_UP_APIC || ((X86_VISWS || SMP) && !X86_VOYAGER) || X86_GENERICARCH
default y
config X86_IO_APIC
bool
- depends on X86_UP_IOAPIC || (SMP && !(X86_VISWS || X86_VOYAGER))
+ depends on X86_UP_IOAPIC || (SMP && !(X86_VISWS || X86_VOYAGER)) || X86_GENERICARCH
default y
config X86_VISWS_APIC
config MICROCODE
tristate "/dev/cpu/microcode - Intel IA32 CPU microcode support"
+ select FW_LOADER
---help---
If you say Y here and also to "/dev file system support" in the
'File systems' section, you will be able to update the microcode on
To compile this driver as a module, choose M here: the
module will be called microcode.
+config MICROCODE_OLD_INTERFACE
+ bool
+ depends on MICROCODE
+ default y
+
config X86_MSR
tristate "/dev/cpu/*/msr - Model-specific register support"
help
endchoice
choice
- depends on EXPERIMENTAL && !X86_PAE
+ depends on EXPERIMENTAL
prompt "Memory split" if EMBEDDED
default VMSPLIT_3G
help
config VMSPLIT_3G
bool "3G/1G user/kernel split"
config VMSPLIT_3G_OPT
+ depends on !HIGHMEM
bool "3G/1G user/kernel split (for full 1G low memory)"
config VMSPLIT_2G
bool "2G/2G user/kernel split"
# Common NUMA Features
config NUMA
bool "Numa Memory Allocation and Scheduler Support"
- depends on SMP && HIGHMEM64G && (X86_NUMAQ || X86_GENERICARCH || (X86_SUMMIT && ACPI))
+ depends on SMP && HIGHMEM64G && (X86_NUMAQ || (X86_SUMMIT || X86_GENERICARCH) && ACPI)
default n if X86_PC
default y if (X86_NUMAQ || X86_SUMMIT)
def_bool y
depends on ARCH_SPARSEMEM_ENABLE
-source "mm/Kconfig"
+config ARCH_POPULATES_NODE_MAP
+ def_bool y
-config HAVE_ARCH_EARLY_PFN_TO_NID
- bool
- default y
- depends on NUMA
+source "mm/Kconfig"
config HIGHPTE
bool "Allocate 3rd-level pagetables from highmem"
See <file:Documentation/mtrr.txt> for more information.
config EFI
- bool "Boot from EFI support (EXPERIMENTAL)"
+ bool "Boot from EFI support"
depends on ACPI
default n
---help---
- This enables the the kernel to boot on EFI platforms using
+ This enables the kernel to boot on EFI platforms using
system configuration information passed to it from the firmware.
This also enables the kernel to use any EFI runtime services that are
available (such as the EFI variable services).
source kernel/Kconfig.hz
config KEXEC
- bool "kexec system call (EXPERIMENTAL)"
- depends on EXPERIMENTAL
+ bool "kexec system call"
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
but it is independent of the system firmware. And like a reboot
you can start any kernel with it, not just Linux.
- The name comes from the similiarity to the exec system call.
+ The name comes from the similarity to the exec system call.
It is an ongoing process to be certain the hardware in a machine
is properly shutdown, so do not be surprised if this code does not
depends on HIGHMEM
help
Generate crash dump after being started by kexec.
+ This should be normally only set in special crash dump kernels
+ which are loaded in the main kernel with kexec-tools into
+ a specially reserved region and then later executed after
+ a crash by kdump/kexec. The crash dump kernel must be compiled
+ to a memory address not used by the main kernel or BIOS using
+ PHYSICAL_START.
+ For more details see Documentation/kdump/kdump.txt
config PHYSICAL_START
hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP)
enable suspend on SMP systems. CPUs can be controlled through
/sys/devices/system/cpu.
+config COMPAT_VDSO
+ bool "Compat VDSO support"
+ default y
+ depends on !PARAVIRT
+ help
+ Map the VDSO to the predictable old-style address too.
+ ---help---
+ Say N here if you are running a sufficiently recent glibc
+ version (2.3.3 or later), to remove the high-mapped
+ VDSO mapping and to exclusively use the randomized VDSO.
+
+ If unsure, say Y.
endmenu
+config ARCH_ENABLE_MEMORY_HOTPLUG
+ def_bool y
+ depends on HIGHMEM
menu "Power management options (ACPI, APM)"
depends on !X86_VOYAGER
config KPROBES
bool "Kprobes (EXPERIMENTAL)"
- depends on EXPERIMENTAL && MODULES
+ depends on KALLSYMS && EXPERIMENTAL && MODULES
help
Kprobes allows you to trap at almost any kernel address and
execute a callback function. register_kprobe() establishes