#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/usb/sl811.h>
+#include <linux/spi/mmc_spi.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/reboot.h>
/*
* Name the Board for the /proc/cpuinfo
*/
-const char bfin_board_name[] = "ADDS-BF537-STAMP";
+const char bfin_board_name[] = "ADI BF537-STAMP";
/*
* Driver needs to know address, irq and flag pin.
*/
-#define ISP1761_BASE 0x203C0000
-#define ISP1761_IRQ IRQ_PF7
-
#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
-static struct resource bfin_isp1761_resources[] = {
+#include <linux/usb/isp1760.h>
+static struct resource bfin_isp1760_resources[] = {
[0] = {
- .name = "isp1761-regs",
- .start = ISP1761_BASE + 0x00000000,
- .end = ISP1761_BASE + 0x000fffff,
+ .start = 0x203C0000,
+ .end = 0x203C0000 + 0x000fffff,
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = ISP1761_IRQ,
- .end = ISP1761_IRQ,
- .flags = IORESOURCE_IRQ,
+ .start = IRQ_PF7,
+ .end = IRQ_PF7,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
},
};
-static struct platform_device bfin_isp1761_device = {
- .name = "isp1761",
- .id = 0,
- .num_resources = ARRAY_SIZE(bfin_isp1761_resources),
- .resource = bfin_isp1761_resources,
+static struct isp1760_platform_data isp1760_priv = {
+ .is_isp1761 = 0,
+ .bus_width_16 = 1,
+ .port1_otg = 0,
+ .analog_oc = 0,
+ .dack_polarity_high = 0,
+ .dreq_polarity_high = 0,
};
-static struct platform_device *bfin_isp1761_devices[] = {
- &bfin_isp1761_device,
+static struct platform_device bfin_isp1760_device = {
+ .name = "isp1760-hcd",
+ .id = 0,
+ .dev = {
+ .platform_data = &isp1760_priv,
+ },
+ .num_resources = ARRAY_SIZE(bfin_isp1760_resources),
+ .resource = bfin_isp1760_resources,
};
-
-int __init bfin_isp1761_init(void)
-{
- unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices);
-
- printk(KERN_INFO "%s(): registering device resources\n", __func__);
- set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING);
-
- return platform_add_devices(bfin_isp1761_devices, num_devices);
-}
-
-void __exit bfin_isp1761_exit(void)
-{
- platform_device_unregister(&bfin_isp1761_device);
-}
-
-arch_initcall(bfin_isp1761_init);
#endif
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mii_bus = {
+ .name = "bfin_mii_bus",
+};
+
static struct platform_device bfin_mac_device = {
.name = "bfin_mac",
+ .dev.platform_data = &bfin_mii_bus,
};
#endif
.offset = 0,
}, {
.name = "linux kernel(nor)",
- .size = 0xE0000,
+ .size = 0x180000,
.offset = MTDPART_OFS_APPEND,
}, {
.name = "file system(nor)",
- .size = 0x400000 - 0x40000 - 0xE0000 - 0x10000,
+ .size = 0x400000 - 0x40000 - 0x180000 - 0x10000,
.offset = MTDPART_OFS_APPEND,
}, {
.name = "MAC Address(nor)",
.mask_flags = MTD_CAP_ROM
}, {
.name = "linux kernel(spi)",
- .size = 0xe0000,
+ .size = 0x180000,
.offset = MTDPART_OFS_APPEND,
}, {
.name = "file system(spi)",
};
#endif
-#if defined(CONFIG_SPI_ADC_BF533) \
- || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+ || defined(CONFIG_BFIN_SPI_ADC_MODULE)
/* SPI ADC chip */
static struct bfin5xx_spi_chip spi_adc_chip_info = {
.enable_dma = 1, /* use dma transfer with this chip*/
};
#endif
+#if defined(CONFIG_SND_BF5XX_SOC_AD1938) \
+ || defined(CONFIG_SND_BF5XX_SOC_AD1938_MODULE)
+static struct bfin5xx_spi_chip ad1938_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 8,
+ .cs_gpio = GPIO_PF5,
+};
+#endif
+
#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
.enable_dma = 0,
};
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
- .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#define MMC_SPI_CARD_DETECT_INT IRQ_PF5
+
+static int bfin_mmc_spi_init(struct device *dev,
+ irqreturn_t (*detect_int)(int, void *), void *data)
+{
+ return request_irq(MMC_SPI_CARD_DETECT_INT, detect_int,
+ IRQF_TRIGGER_FALLING, "mmc-spi-detect", data);
+}
+
+static void bfin_mmc_spi_exit(struct device *dev, void *data)
+{
+ free_irq(MMC_SPI_CARD_DETECT_INT, data);
+}
+
+static struct mmc_spi_platform_data bfin_mmc_spi_pdata = {
+ .init = bfin_mmc_spi_init,
+ .exit = bfin_mmc_spi_exit,
+ .detect_delay = 100, /* msecs */
+};
+
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+ .enable_dma = 0,
.bits_per_word = 8,
+ .pio_interrupt = 0,
};
#endif
};
#endif
+#if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
+#include <linux/input.h>
+#include <linux/spi/adxl34x.h>
+static const struct adxl34x_platform_data adxl34x_info = {
+ .x_axis_offset = 0,
+ .y_axis_offset = 0,
+ .z_axis_offset = 0,
+ .tap_threshold = 0x31,
+ .tap_duration = 0x10,
+ .tap_latency = 0x60,
+ .tap_window = 0xF0,
+ .tap_axis_control = ADXL_TAP_X_EN | ADXL_TAP_Y_EN | ADXL_TAP_Z_EN,
+ .act_axis_control = 0xFF,
+ .activity_threshold = 5,
+ .inactivity_threshold = 3,
+ .inactivity_time = 4,
+ .free_fall_threshold = 0x7,
+ .free_fall_time = 0x20,
+ .data_rate = 0x8,
+ .data_range = ADXL_FULL_RES,
+
+ .ev_type = EV_ABS,
+ .ev_code_x = ABS_X, /* EV_REL */
+ .ev_code_y = ABS_Y, /* EV_REL */
+ .ev_code_z = ABS_Z, /* EV_REL */
+
+ .ev_code_tap_x = BTN_TOUCH, /* EV_KEY */
+ .ev_code_tap_y = BTN_TOUCH, /* EV_KEY */
+ .ev_code_tap_z = BTN_TOUCH, /* EV_KEY */
+
+/* .ev_code_ff = KEY_F,*/ /* EV_KEY */
+/* .ev_code_act_inactivity = KEY_A,*/ /* EV_KEY */
+ .power_mode = ADXL_AUTO_SLEEP | ADXL_LINK,
+ .fifo_mode = ADXL_FIFO_STREAM,
+};
+#endif
+
#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
static struct bfin5xx_spi_chip spi_ad7879_chip_info = {
.enable_dma = 0,
};
#endif
+#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
+static struct bfin5xx_spi_chip enc28j60_spi_chip_info = {
+ .enable_dma = 1,
+ .bits_per_word = 8,
+ .cs_gpio = GPIO_PF10,
+};
+#endif
+
#if defined(CONFIG_MTD_DATAFLASH) \
|| defined(CONFIG_MTD_DATAFLASH_MODULE)
.mask_flags = MTD_CAP_ROM
}, {
.name = "linux kernel(spi)",
- .size = 0xe0000,
+ .size = 0x180000,
.offset = MTDPART_OFS_APPEND,
}, {
.name = "file system(spi)",
.mode = SPI_MODE_3,
},
#endif
-#if defined(CONFIG_SPI_ADC_BF533) \
- || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+ || defined(CONFIG_BFIN_SPI_ADC_MODULE)
{
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
.controller_data = &ad1836_spi_chip_info,
},
#endif
+
+#if defined(CONFIG_SND_BF5XX_SOC_AD1938) || defined(CONFIG_SND_BF5XX_SOC_AD1938_MODULE)
+ {
+ .modalias = "ad1938-spi",
+ .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 0,/* CONFIG_SND_BLACKFIN_SPI_PFBIT */
+ .controller_data = &ad1938_spi_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+
#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
{
.modalias = "ad9960-spi",
.controller_data = &ad9960_spi_chip_info,
},
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
- .modalias = "spi_mmc_dummy",
+ .modalias = "mmc_spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
- .chip_select = 0,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
- .mode = SPI_MODE_3,
- },
- {
- .modalias = "spi_mmc",
- .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = CONFIG_SPI_MMC_CS_CHAN,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
+ .chip_select = 4,
+ .platform_data = &bfin_mmc_spi_pdata,
+ .controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
.mode = SPI_CPHA | SPI_CPOL,
},
#endif
+#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
+ {
+ .modalias = "enc28j60",
+ .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
+ .irq = IRQ_PF6,
+ .bus_num = 0,
+ .chip_select = 0, /* GPIO controlled SSEL */
+ .controller_data = &enc28j60_spi_chip_info,
+ .mode = SPI_MODE_0,
+ },
+#endif
};
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
[1] = {
.start = CH_SPI,
.end = CH_SPI,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = IRQ_SPI,
+ .end = IRQ_SPI,
.flags = IORESOURCE_IRQ,
},
};
};
#endif /* spi master and devices */
+#if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE)
+
+/* SPORT SPI controller data */
+static struct bfin5xx_spi_master bfin_sport_spi0_info = {
+ .num_chipselect = 1, /* master only supports one device */
+ .enable_dma = 0, /* master don't support DMA */
+ .pin_req = {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_DRPRI,
+ P_SPORT0_RSCLK, P_SPORT0_TFS, P_SPORT0_RFS, 0},
+};
+
+static struct resource bfin_sport_spi0_resource[] = {
+ [0] = {
+ .start = SPORT0_TCR1,
+ .end = SPORT0_TCR1 + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_SPORT0_ERROR,
+ .end = IRQ_SPORT0_ERROR,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_sport_spi0_device = {
+ .name = "bfin-sport-spi",
+ .id = 1, /* Bus number */
+ .num_resources = ARRAY_SIZE(bfin_sport_spi0_resource),
+ .resource = bfin_sport_spi0_resource,
+ .dev = {
+ .platform_data = &bfin_sport_spi0_info, /* Passed to driver */
+ },
+};
+
+static struct bfin5xx_spi_master bfin_sport_spi1_info = {
+ .num_chipselect = 1, /* master only supports one device */
+ .enable_dma = 0, /* master don't support DMA */
+ .pin_req = {P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_DRPRI,
+ P_SPORT1_RSCLK, P_SPORT1_TFS, P_SPORT1_RFS, 0},
+};
+
+static struct resource bfin_sport_spi1_resource[] = {
+ [0] = {
+ .start = SPORT1_TCR1,
+ .end = SPORT1_TCR1 + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_SPORT1_ERROR,
+ .end = IRQ_SPORT1_ERROR,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_sport_spi1_device = {
+ .name = "bfin-sport-spi",
+ .id = 2, /* Bus number */
+ .num_resources = ARRAY_SIZE(bfin_sport_spi1_resource),
+ .resource = bfin_sport_spi1_resource,
+ .dev = {
+ .platform_data = &bfin_sport_spi1_info, /* Passed to driver */
+ },
+};
+
+#endif /* sport spi master and devices */
+
#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
static struct platform_device bfin_fb_device = {
.name = "bf537-lq035",
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-static struct resource bfin_sir_resources[] = {
#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
{
.start = 0xFFC00400,
.end = 0xFFC004FF,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_RX,
+ .end = IRQ_UART0_RX+1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = CH_UART0_RX,
+ .end = CH_UART0_RX+1,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static struct platform_device bfin_sir0_device = {
+ .name = "bfin_sir",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bfin_sir0_resources),
+ .resource = bfin_sir0_resources,
+};
#endif
#ifdef CONFIG_BFIN_SIR1
+static struct resource bfin_sir1_resources[] = {
{
.start = 0xFFC02000,
.end = 0xFFC020FF,
.flags = IORESOURCE_MEM,
},
-#endif
+ {
+ .start = IRQ_UART1_RX,
+ .end = IRQ_UART1_RX+1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = CH_UART1_RX,
+ .end = CH_UART1_RX+1,
+ .flags = IORESOURCE_DMA,
+ },
};
-static struct platform_device bfin_sir_device = {
+static struct platform_device bfin_sir1_device = {
.name = "bfin_sir",
- .id = 0,
- .num_resources = ARRAY_SIZE(bfin_sir_resources),
- .resource = bfin_sir_resources,
+ .id = 1,
+ .num_resources = ARRAY_SIZE(bfin_sir1_resources),
+ .resource = bfin_sir1_resources,
};
#endif
+#endif
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
static struct resource bfin_twi0_resource[] = {
};
#endif
-#ifdef CONFIG_I2C_BOARDINFO
+#if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE)
+#include <linux/input.h>
+#include <linux/i2c/adp5588.h>
+static const unsigned short adp5588_keymap[ADP5588_KEYMAPSIZE] = {
+ [0] = KEY_GRAVE,
+ [1] = KEY_1,
+ [2] = KEY_2,
+ [3] = KEY_3,
+ [4] = KEY_4,
+ [5] = KEY_5,
+ [6] = KEY_6,
+ [7] = KEY_7,
+ [8] = KEY_8,
+ [9] = KEY_9,
+ [10] = KEY_0,
+ [11] = KEY_MINUS,
+ [12] = KEY_EQUAL,
+ [13] = KEY_BACKSLASH,
+ [15] = KEY_KP0,
+ [16] = KEY_Q,
+ [17] = KEY_W,
+ [18] = KEY_E,
+ [19] = KEY_R,
+ [20] = KEY_T,
+ [21] = KEY_Y,
+ [22] = KEY_U,
+ [23] = KEY_I,
+ [24] = KEY_O,
+ [25] = KEY_P,
+ [26] = KEY_LEFTBRACE,
+ [27] = KEY_RIGHTBRACE,
+ [29] = KEY_KP1,
+ [30] = KEY_KP2,
+ [31] = KEY_KP3,
+ [32] = KEY_A,
+ [33] = KEY_S,
+ [34] = KEY_D,
+ [35] = KEY_F,
+ [36] = KEY_G,
+ [37] = KEY_H,
+ [38] = KEY_J,
+ [39] = KEY_K,
+ [40] = KEY_L,
+ [41] = KEY_SEMICOLON,
+ [42] = KEY_APOSTROPHE,
+ [43] = KEY_BACKSLASH,
+ [45] = KEY_KP4,
+ [46] = KEY_KP5,
+ [47] = KEY_KP6,
+ [48] = KEY_102ND,
+ [49] = KEY_Z,
+ [50] = KEY_X,
+ [51] = KEY_C,
+ [52] = KEY_V,
+ [53] = KEY_B,
+ [54] = KEY_N,
+ [55] = KEY_M,
+ [56] = KEY_COMMA,
+ [57] = KEY_DOT,
+ [58] = KEY_SLASH,
+ [60] = KEY_KPDOT,
+ [61] = KEY_KP7,
+ [62] = KEY_KP8,
+ [63] = KEY_KP9,
+ [64] = KEY_SPACE,
+ [65] = KEY_BACKSPACE,
+ [66] = KEY_TAB,
+ [67] = KEY_KPENTER,
+ [68] = KEY_ENTER,
+ [69] = KEY_ESC,
+ [70] = KEY_DELETE,
+ [74] = KEY_KPMINUS,
+ [76] = KEY_UP,
+ [77] = KEY_DOWN,
+ [78] = KEY_RIGHT,
+ [79] = KEY_LEFT,
+};
+
+static struct adp5588_kpad_platform_data adp5588_kpad_data = {
+ .rows = 8,
+ .cols = 10,
+ .keymap = adp5588_keymap,
+ .keymapsize = ARRAY_SIZE(adp5588_keymap),
+ .repeat = 0,
+};
+#endif
+
+#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
+#include <linux/mfd/adp5520.h>
+
+ /*
+ * ADP5520/5501 Backlight Data
+ */
+
+static struct adp5520_backlight_platfrom_data adp5520_backlight_data = {
+ .fade_in = FADE_T_1200ms,
+ .fade_out = FADE_T_1200ms,
+ .fade_led_law = BL_LAW_LINEAR,
+ .en_ambl_sens = 1,
+ .abml_filt = BL_AMBL_FILT_640ms,
+ .l1_daylight_max = BL_CUR_mA(15),
+ .l1_daylight_dim = BL_CUR_mA(0),
+ .l2_office_max = BL_CUR_mA(7),
+ .l2_office_dim = BL_CUR_mA(0),
+ .l3_dark_max = BL_CUR_mA(3),
+ .l3_dark_dim = BL_CUR_mA(0),
+ .l2_trip = L2_COMP_CURR_uA(700),
+ .l2_hyst = L2_COMP_CURR_uA(50),
+ .l3_trip = L3_COMP_CURR_uA(80),
+ .l3_hyst = L3_COMP_CURR_uA(20),
+};
+
+ /*
+ * ADP5520/5501 LEDs Data
+ */
+
+#include <linux/leds.h>
+
+static struct led_info adp5520_leds[] = {
+ {
+ .name = "adp5520-led1",
+ .default_trigger = "none",
+ .flags = FLAG_ID_ADP5520_LED1_ADP5501_LED0 | LED_OFFT_600ms,
+ },
+#ifdef ADP5520_EN_ALL_LEDS
+ {
+ .name = "adp5520-led2",
+ .default_trigger = "none",
+ .flags = FLAG_ID_ADP5520_LED2_ADP5501_LED1,
+ },
+ {
+ .name = "adp5520-led3",
+ .default_trigger = "none",
+ .flags = FLAG_ID_ADP5520_LED3_ADP5501_LED2,
+ },
+#endif
+};
+
+static struct adp5520_leds_platfrom_data adp5520_leds_data = {
+ .num_leds = ARRAY_SIZE(adp5520_leds),
+ .leds = adp5520_leds,
+ .fade_in = FADE_T_600ms,
+ .fade_out = FADE_T_600ms,
+ .led_on_time = LED_ONT_600ms,
+};
+
+ /*
+ * ADP5520 GPIO Data
+ */
+
+static struct adp5520_gpio_platfrom_data adp5520_gpio_data = {
+ .gpio_start = 50,
+ .gpio_en_mask = GPIO_C1 | GPIO_C2 | GPIO_R2,
+ .gpio_pullup_mask = GPIO_C1 | GPIO_C2 | GPIO_R2,
+};
+
+ /*
+ * ADP5520 Keypad Data
+ */
+
+#include <linux/input.h>
+static const unsigned short adp5520_keymap[ADP5520_KEYMAPSIZE] = {
+ [KEY(0, 0)] = KEY_GRAVE,
+ [KEY(0, 1)] = KEY_1,
+ [KEY(0, 2)] = KEY_2,
+ [KEY(0, 3)] = KEY_3,
+ [KEY(1, 0)] = KEY_4,
+ [KEY(1, 1)] = KEY_5,
+ [KEY(1, 2)] = KEY_6,
+ [KEY(1, 3)] = KEY_7,
+ [KEY(2, 0)] = KEY_8,
+ [KEY(2, 1)] = KEY_9,
+ [KEY(2, 2)] = KEY_0,
+ [KEY(2, 3)] = KEY_MINUS,
+ [KEY(3, 0)] = KEY_EQUAL,
+ [KEY(3, 1)] = KEY_BACKSLASH,
+ [KEY(3, 2)] = KEY_BACKSPACE,
+ [KEY(3, 3)] = KEY_ENTER,
+};
+
+static struct adp5520_keys_platfrom_data adp5520_keys_data = {
+ .rows_en_mask = ROW_R3 | ROW_R2 | ROW_R1 | ROW_R0,
+ .cols_en_mask = COL_C3 | COL_C2 | COL_C1 | COL_C0,
+ .keymap = adp5520_keymap,
+ .keymapsize = ARRAY_SIZE(adp5520_keymap),
+ .repeat = 0,
+};
+
+ /*
+ * ADP5520/5501 Multifuction Device Init Data
+ */
+
+static struct adp5520_subdev_info adp5520_subdevs[] = {
+ {
+ .name = "adp5520-backlight",
+ .id = ID_ADP5520,
+ .platform_data = &adp5520_backlight_data,
+ },
+ {
+ .name = "adp5520-led",
+ .id = ID_ADP5520,
+ .platform_data = &adp5520_leds_data,
+ },
+ {
+ .name = "adp5520-gpio",
+ .id = ID_ADP5520,
+ .platform_data = &adp5520_gpio_data,
+ },
+ {
+ .name = "adp5520-keys",
+ .id = ID_ADP5520,
+ .platform_data = &adp5520_keys_data,
+ },
+};
+
+static struct adp5520_platform_data adp5520_pdev_data = {
+ .num_subdevs = ARRAY_SIZE(adp5520_subdevs),
+ .subdevs = adp5520_subdevs,
+};
+
+#endif
+
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE)
{
I2C_BOARD_INFO("ad7142_joystick", 0x2C),
- .irq = IRQ_PF5,
+ .irq = IRQ_PG5,
},
#endif
-#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
},
.platform_data = (void *)&bfin_ad7879_ts_info,
},
#endif
-};
+#if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE)
+ {
+ I2C_BOARD_INFO("adp5588-keys", 0x34),
+ .irq = IRQ_PG0,
+ .platform_data = (void *)&adp5588_kpad_data,
+ },
+#endif
+#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
+ {
+ I2C_BOARD_INFO("pmic-adp5520", 0x32),
+ .irq = IRQ_PG0,
+ .platform_data = (void *)&adp5520_pdev_data,
+ },
+#endif
+#if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE)
+ {
+ I2C_BOARD_INFO("adxl34x", 0x53),
+ .irq = IRQ_PG3,
+ .platform_data = (void *)&adxl34x_info,
+ },
#endif
+};
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
static struct platform_device bfin_sport0_uart_device = {
#endif
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT IRQ_PF5
+#define CF_IDE_NAND_CARD_USE_HDD_INTERFACE
+/* #define CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE */
+#ifdef CF_IDE_NAND_CARD_USE_HDD_INTERFACE
+#define PATA_INT IRQ_PF5
static struct pata_platform_info bfin_pata_platform_data = {
.ioport_shift = 1,
.irq_flags = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
.flags = IORESOURCE_IRQ,
},
};
+#elif defined(CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE)
+static struct pata_platform_info bfin_pata_platform_data = {
+ .ioport_shift = 0,
+};
+/* CompactFlash Storage Card Memory Mapped Adressing
+ * /REG = A11 = 1
+ */
+static struct resource bfin_pata_resources[] = {
+ {
+ .start = 0x20211800,
+ .end = 0x20211807,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 0x2021180E, /* Device Ctl */
+ .end = 0x2021180E,
+ .flags = IORESOURCE_MEM,
+ },
+};
+#endif
static struct platform_device bfin_pata_device = {
.name = "pata_platform",
&isp1362_hcd_device,
#endif
+#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+ &bfin_isp1760_device,
+#endif
+
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
&smc91x_device,
#endif
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+ &bfin_mii_bus,
&bfin_mac_device,
#endif
&bfin_spi0_device,
#endif
+#if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE)
+ &bfin_sport_spi0_device,
+ &bfin_sport_spi1_device,
+#endif
+
#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
&bfin_fb_device,
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
- &bfin_sir_device,
+#ifdef CONFIG_BFIN_SIR0
+ &bfin_sir0_device,
+#endif
+#ifdef CONFIG_BFIN_SIR1
+ &bfin_sir1_device,
+#endif
#endif
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
static int __init stamp_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
-
-#ifdef CONFIG_I2C_BOARDINFO
i2c_register_board_info(0, bfin_i2c_board_info,
ARRAY_SIZE(bfin_i2c_board_info));
-#endif
-
bfin_plat_nand_init();
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#if (defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)) \
+ && defined(PATA_INT)
irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
#endif
{
/* workaround reboot hang when booting from SPI */
if ((bfin_read_SYSCR() & 0x7) == 0x3)
- bfin_gpio_reset_spi0_ssel1();
+ bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
}
/*
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff