/*
- * File: arch/blackfin/mach-bf533/H8606.c
- * Based on: arch/blackfin/mach-bf533/stamp.c
- * Author: Javier Herrero <jherrero@hvsistemas.es>
+ * Copyright 2004-2009 Analog Devices Inc.
+ * 2007-2008 HV Sistemas S.L.
+ * Javier Herrero <jherrero@hvsistemas.es>
+ * 2005 National ICT Australia (NICTA)
+ * Aidan Williams <aidan@nicta.com.au>
*
- * Created: 2007
- * Description: Board Info File for the HV Sistemas H8606 board
- *
- * Modified:
- * Copyright 2005 National ICT Australia (NICTA)
- * Copyright 2004-2006 Analog Devices Inc
- * Copyright 2007 HV Sistemas S.L.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include <linux/device.h>
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/usb/isp1362.h>
#endif
-#include <linux/pata_platform.h>
#include <linux/irq.h>
#include <asm/dma.h>
static struct resource dm9000_resources[] = {
[0] = {
.start = 0x20300000,
- .end = 0x20300000 + 8,
+ .end = 0x20300002,
.flags = IORESOURCE_MEM,
},
[1] = {
+ .start = 0x20300004,
+ .end = 0x20300006,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
.start = IRQ_PF10,
.end = IRQ_PF10,
- .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
+ .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | IRQF_SHARED | IRQF_TRIGGER_HIGH),
},
};
#endif
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+ .leda = RPC_LED_100_10,
+ .ledb = RPC_LED_TX_RX,
+};
+
static struct resource smc91x_resources[] = {
{
.name = "smc91x-regs",
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
+ .dev = {
+ .platform_data = &smc91x_info,
+ },
};
#endif
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
- .name = "bootloader",
- .size = 0x00060000,
+ .name = "bootloader (spi)",
+ .size = 0x40000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
}, {
- .name = "kernel",
- .size = 0x100000,
- .offset = 0x60000
+ .name = "fpga (spi)",
+ .size = 0x30000,
+ .offset = 0x40000
+ }, {
+ .name = "linux kernel (spi)",
+ .size = 0x150000,
+ .offset = 0x70000
}, {
- .name = "file system",
- .size = 0x6a0000,
- .offset = 0x00160000,
+ .name = "jffs2 root file system (spi)",
+ .size = 0x640000,
+ .offset = 0x1c0000,
}
};
};
#endif
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
/* SPI ADC chip */
static struct bfin5xx_spi_chip spi_adc_chip_info = {
.ctl_reg = 0x1000,
};
#endif
-#if defined(CONFIG_PBX)
-static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
- .ctl_reg = 0x1c04,
- .enable_dma = 0,
- .bits_per_word = 8,
- .cs_change_per_word = 1,
-};
-#endif
-
/* Notice: for blackfin, the speed_hz is the value of register
* SPI_BAUD, not the real baudrate */
static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
{
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
.max_speed_hz = 4, /* actual baudrate is SCLK/(2xspeed_hz) */
#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
{
- .modalias = "ad1836-spi",
+ .modalias = "ad1836",
.max_speed_hz = 16,
.bus_num = 1,
.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
},
#endif
-#if defined(CONFIG_PBX)
- {
- .modalias = "fxs-spi",
- .max_speed_hz = 4,
- .bus_num = 1,
- .chip_select = 3,
- .controller_data = &spi_si3xxx_chip_info,
- },
-
- {
- .modalias = "fxo-spi",
- .max_speed_hz = 4,
- .bus_num = 1,
- .chip_select = 2,
- .controller_data = &spi_si3xxx_chip_info,
- },
-#endif
};
/* SPI (0) */
[1] = {
.start = CH_SPI,
.end = CH_SPI,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = IRQ_SPI,
+ .end = IRQ_SPI,
.flags = IORESOURCE_IRQ,
}
};
};
#endif
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
+ {
+ .start = 0xFFC00400,
+ .end = 0xFFC004FF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_UART0_RX,
+ .end = IRQ_UART0_RX+1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = CH_UART0_RX,
+ .end = CH_UART0_RX+1,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static struct platform_device bfin_sir0_device = {
+ .name = "bfin_sir",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bfin_sir0_resources),
+ .resource = bfin_sir0_resources,
+};
+#endif
+#endif
+
#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
#include <linux/serial_8250.h>
static struct plat_serial8250_port serial8250_platform_data [] = {
{
- .membase = 0x20200000,
+ .membase = (void *)0x20200000,
.mapbase = 0x20200000,
.irq = IRQ_PF8,
.flags = UPF_BOOT_AUTOCONF | UART_CONFIG_TYPE,
.regshift = 1,
.uartclk = 66666667,
}, {
- .membase = 0x20200010,
+ .membase = (void *)0x20200010,
.mapbase = 0x20200010,
.irq = IRQ_PF8,
.flags = UPF_BOOT_AUTOCONF | UART_CONFIG_TYPE,
#endif
+#if defined(CONFIG_KEYBOARD_OPENCORES) || defined(CONFIG_KEYBOARD_OPENCORES_MODULE)
+
+/*
+ * Configuration for one OpenCores keyboard controller in FPGA at address 0x20200030,
+ * interrupt output wired to PF9. Change to suit different FPGA configuration
+ */
+
+static struct resource opencores_kbd_resources[] = {
+ [0] = {
+ .start = 0x20200030,
+ .end = 0x20300030 + 2,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_PF9,
+ .end = IRQ_PF9,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ },
+};
+
+static struct platform_device opencores_kbd_device = {
+ .id = -1,
+ .name = "opencores-kbd",
+ .resource = opencores_kbd_resources,
+ .num_resources = ARRAY_SIZE(opencores_kbd_resources),
+};
+#endif
+
static struct platform_device *h8606_devices[] __initdata = {
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
&rtc_device,
#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
&serial8250_device,
#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#ifdef CONFIG_BFIN_SIR0
+ &bfin_sir0_device,
+#endif
+#endif
+
+#if defined(CONFIG_KEYBOARD_OPENCORES) || defined(CONFIG_KEYBOARD_OPENCORES_MODULE)
+ &opencores_kbd_device,
+#endif
};
static int __init H8606_init(void)
{
printk(KERN_INFO "HV Sistemas H8606 board support by http://www.hvsistemas.com\n");
- printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+ printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(h8606_devices, ARRAY_SIZE(h8606_devices));
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff