default y
select HAVE_IDE
select HAVE_OPROFILE
+ select ARCH_WANT_OPTIONAL_GPIOLIB
config ZONE_DMA
bool
bool
default y
-config HARDWARE_PM
- def_bool y
- depends on OPROFILE
-
source "init/Kconfig"
+
source "kernel/Kconfig.preempt"
+source "kernel/Kconfig.freezer"
+
menu "Blackfin Processor Options"
comment "Processor and Board Settings"
prompt "CPU"
default BF533
+config BF512
+ bool "BF512"
+ help
+ BF512 Processor Support.
+
+config BF514
+ bool "BF514"
+ help
+ BF514 Processor Support.
+
+config BF516
+ bool "BF516"
+ help
+ BF516 Processor Support.
+
+config BF518
+ bool "BF518"
+ help
+ BF518 Processor Support.
+
config BF522
bool "BF522"
help
help
BF537 Processor Support.
+config BF538
+ bool "BF538"
+ help
+ BF538 Processor Support.
+
+config BF539
+ bool "BF539"
+ help
+ BF539 Processor Support.
+
config BF542
bool "BF542"
help
config BF561
bool "BF561"
help
- Not Supported Yet - Work in progress - BF561 Processor Support.
+ BF561 Processor Support.
endchoice
+config SMP
+ depends on BF561
+ bool "Symmetric multi-processing support"
+ ---help---
+ This enables support for systems with more than one CPU,
+ like the dual core BF561. If you have a system with only one
+ CPU, say N. If you have a system with more than one CPU, say Y.
+
+ If you don't know what to do here, say N.
+
+config NR_CPUS
+ int
+ depends on SMP
+ default 2 if BF561
+
+config IRQ_PER_CPU
+ bool
+ depends on SMP
+ default y
+
+config TICK_SOURCE_SYSTMR0
+ bool
+ select BFIN_GPTIMERS
+ depends on SMP
+ default y
+
+config BF_REV_MIN
+ int
+ default 0 if (BF51x || BF52x || BF54x)
+ default 2 if (BF537 || BF536 || BF534)
+ default 3 if (BF561 ||BF533 || BF532 || BF531)
+ default 4 if (BF538 || BF539)
+
+config BF_REV_MAX
+ int
+ default 2 if (BF51x || BF52x || BF54x)
+ default 3 if (BF537 || BF536 || BF534)
+ default 5 if (BF561 || BF538 || BF539)
+ default 6 if (BF533 || BF532 || BF531)
+
choice
prompt "Silicon Rev"
- default BF_REV_0_1 if BF527
- default BF_REV_0_2 if BF537
- default BF_REV_0_3 if BF533
- default BF_REV_0_0 if BF549
+ default BF_REV_0_1 if (BF51x || BF52x || BF54x)
+ default BF_REV_0_2 if (BF534 || BF536 || BF537)
+ default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF561)
config BF_REV_0_0
bool "0.0"
- depends on (BF52x || BF54x)
+ depends on (BF51x || BF52x || BF54x)
config BF_REV_0_1
bool "0.1"
config BF_REV_0_2
bool "0.2"
- depends on (BF537 || BF536 || BF534)
+ depends on (BF52x || BF537 || BF536 || BF534 || BF54x)
config BF_REV_0_3
bool "0.3"
config BF_REV_0_4
bool "0.4"
- depends on (BF561 || BF533 || BF532 || BF531)
+ depends on (BF561 || BF533 || BF532 || BF531 || BF538 || BF539)
config BF_REV_0_5
bool "0.5"
- depends on (BF561 || BF533 || BF532 || BF531)
+ depends on (BF561 || BF533 || BF532 || BF531 || BF538 || BF539)
+
+config BF_REV_0_6
+ bool "0.6"
+ depends on (BF533 || BF532 || BF531)
config BF_REV_ANY
bool "any"
endchoice
+config BF51x
+ bool
+ depends on (BF512 || BF514 || BF516 || BF518)
+ default y
+
config BF52x
bool
depends on (BF522 || BF523 || BF524 || BF525 || BF526 || BF527)
config MEM_MT48LC32M8A2_75
bool
- depends on (BFIN537_STAMP || PNAV10)
+ depends on (BFIN537_STAMP || PNAV10 || BFIN538_EZKIT)
default y
config MEM_MT48LC8M32B2B5_7
config MEM_MT48LC32M16A2TG_75
bool
- depends on (BFIN527_EZKIT || BFIN532_IP0X)
+ depends on (BFIN527_EZKIT || BFIN532_IP0X || BLACKSTAMP || BFIN526_EZBRD)
default y
+source "arch/blackfin/mach-bf518/Kconfig"
source "arch/blackfin/mach-bf527/Kconfig"
source "arch/blackfin/mach-bf533/Kconfig"
source "arch/blackfin/mach-bf561/Kconfig"
source "arch/blackfin/mach-bf537/Kconfig"
+source "arch/blackfin/mach-bf538/Kconfig"
source "arch/blackfin/mach-bf548/Kconfig"
menu "Board customizations"
memory region is used to capture NULL pointer references as well
as some core kernel functions.
+config ROM_BASE
+ hex "Kernel ROM Base"
+ depends on ROMKERNEL
+ default "0x20040000"
+ range 0x20000000 0x20400000 if !(BF54x || BF561)
+ range 0x20000000 0x30000000 if (BF54x || BF561)
+ help
+
comment "Clock/PLL Setup"
config CLKIN_HZ
int "Frequency of the crystal on the board in Hz"
default "11059200" if BFIN533_STAMP
default "27000000" if BFIN533_EZKIT
- default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS)
+ default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD || BFIN538_EZKIT || BFIN518F-EZBRD)
default "30000000" if BFIN561_EZKIT
default "24576000" if PNAV10
default "10000000" if BFIN532_IP0X
range 1 64
default "22" if BFIN533_EZKIT
default "45" if BFIN533_STAMP
- default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM)
+ default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM || BFIN538_EZKIT)
default "22" if BFIN533_BLUETECHNIX_CM
default "20" if (BFIN537_BLUETECHNIX_CM || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM)
default "20" if BFIN561_EZKIT
- default "16" if H8606_HVSISTEMAS
+ default "16" if (H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD || BFIN518F_EZBRD)
help
This controls the frequency of the on-chip PLL. This can be between 1 and 64.
PLL Frequency = (Crystal Frequency) * (this setting)
This can be between 1 and 15
System Clock = (PLL frequency) / (this setting)
-config MAX_MEM_SIZE
- int "Max SDRAM Memory Size in MBytes"
- depends on !MPU
- default 512
- help
- This is the max memory size that the kernel will create CPLB
- tables for. Your system will not be able to handle any more.
-
choice
prompt "DDR SDRAM Chip Type"
depends on BFIN_KERNEL_CLOCK
bool "MT46V32M16_5B"
endchoice
+choice
+ prompt "DDR/SDRAM Timing"
+ depends on BFIN_KERNEL_CLOCK
+ default BFIN_KERNEL_CLOCK_MEMINIT_CALC
+ help
+ This option allows you to specify Blackfin SDRAM/DDR Timing parameters
+ The calculated SDRAM timing parameters may not be 100%
+ accurate - This option is therefore marked experimental.
+
+config BFIN_KERNEL_CLOCK_MEMINIT_CALC
+ bool "Calculate Timings (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+
+config BFIN_KERNEL_CLOCK_MEMINIT_SPEC
+ bool "Provide accurate Timings based on target SCLK"
+ help
+ Please consult the Blackfin Hardware Reference Manuals as well
+ as the memory device datasheet.
+ http://docs.blackfin.uclinux.org/doku.php?id=bfin:sdram
+endchoice
+
+menu "Memory Init Control"
+ depends on BFIN_KERNEL_CLOCK_MEMINIT_SPEC
+
+config MEM_DDRCTL0
+ depends on BF54x
+ hex "DDRCTL0"
+ default 0x0
+
+config MEM_DDRCTL1
+ depends on BF54x
+ hex "DDRCTL1"
+ default 0x0
+
+config MEM_DDRCTL2
+ depends on BF54x
+ hex "DDRCTL2"
+ default 0x0
+
+config MEM_EBIU_DDRQUE
+ depends on BF54x
+ hex "DDRQUE"
+ default 0x0
+
+config MEM_SDRRC
+ depends on !BF54x
+ hex "SDRRC"
+ default 0x0
+
+config MEM_SDGCTL
+ depends on !BF54x
+ hex "SDGCTL"
+ default 0x0
+endmenu
+
#
# Max & Min Speeds for various Chips
#
config MAX_VCO_HZ
int
+ default 400000000 if BF512
+ default 400000000 if BF514
+ default 400000000 if BF516
+ default 400000000 if BF518
default 600000000 if BF522
default 400000000 if BF523
default 400000000 if BF524
config GENERIC_TIME
bool "Generic time"
+ depends on !SMP
default y
config GENERIC_CLOCKEVENTS
source kernel/time/Kconfig
-comment "Memory Setup"
-
comment "Misc"
choice
menu "Blackfin Kernel Optimizations"
+ depends on !SMP
comment "Memory Optimizations"
If enabled, the CPLB Switch Tables are linked
into L1 data memory. (less latency)
-endmenu
+config APP_STACK_L1
+ bool "Support locating application stack in L1 Scratch Memory"
+ default y
+ help
+ If enabled the application stack can be located in L1
+ scratch memory (less latency).
+ Currently only works with FLAT binaries.
+
+config EXCEPTION_L1_SCRATCH
+ bool "Locate exception stack in L1 Scratch Memory"
+ default n
+ depends on !APP_STACK_L1 && !SYSCALL_TAB_L1
+ help
+ Whenever an exception occurs, use the L1 Scratch memory for
+ stack storage. You cannot place the stacks of FLAT binaries
+ in L1 when using this option.
+
+ If you don't use L1 Scratch, then you should say Y here.
+
+comment "Speed Optimizations"
+config BFIN_INS_LOWOVERHEAD
+ bool "ins[bwl] low overhead, higher interrupt latency"
+ default y
+ help
+ Reads on the Blackfin are speculative. In Blackfin terms, this means
+ they can be interrupted at any time (even after they have been issued
+ on to the external bus), and re-issued after the interrupt occurs.
+ For memory - this is not a big deal, since memory does not change if
+ it sees a read.
+
+ If a FIFO is sitting on the end of the read, it will see two reads,
+ when the core only sees one since the FIFO receives both the read
+ which is cancelled (and not delivered to the core) and the one which
+ is re-issued (which is delivered to the core).
+
+ To solve this, interrupts are turned off before reads occur to
+ I/O space. This option controls which the overhead/latency of
+ controlling interrupts during this time
+ "n" turns interrupts off every read
+ (higher overhead, but lower interrupt latency)
+ "y" turns interrupts off every loop
+ (low overhead, but longer interrupt latency)
+
+ default behavior is to leave this set to on (type "Y"). If you are experiencing
+ interrupt latency issues, it is safe and OK to turn this off.
+
+endmenu
choice
prompt "Kernel executes from"
To compile this driver as a module, choose M here: the module
will be called gptimers.ko.
-config BFIN_DMA_5XX
- bool "Enable DMA Support"
- depends on (BF52x || BF53x || BF561 || BF54x)
- default y
- help
- DMA driver for BF5xx.
-
choice
- prompt "Uncached SDRAM region"
+ prompt "Uncached DMA region"
default DMA_UNCACHED_1M
- depends on BFIN_DMA_5XX
config DMA_UNCACHED_4M
bool "Enable 4M DMA region"
config DMA_UNCACHED_2M
choice
prompt "Policy"
depends on BFIN_DCACHE
- default BFIN_WB
+ default BFIN_WB if !SMP
+ default BFIN_WT if SMP
config BFIN_WB
bool "Write back"
+ depends on !SMP
help
Write Back Policy:
Cached data will be written back to SDRAM only when needed.
endchoice
+config BFIN_L2_CACHEABLE
+ bool "Cache L2 SRAM"
+ depends on (BFIN_DCACHE || BFIN_ICACHE) && (BF54x || (BF561 && !SMP))
+ default n
+ help
+ Select to make L2 SRAM cacheable in L1 data and instruction cache.
+
config MPU
bool "Enable the memory protection unit (EXPERIMENTAL)"
default n
config PCI
bool "PCI support"
+ depends on BROKEN
help
Support for PCI bus.
int "GPIO number"
range 0 47
depends on PM_WAKEUP_BY_GPIO
- default 2 if BFIN537_STAMP
+ default 2
choice
prompt "GPIO Polarity"
config PM_BFIN_WAKE_PH6
bool "Allow Wake-Up from on-chip PHY or PH6 GP"
- depends on PM && (BF52x || BF534 || BF536 || BF537)
+ depends on PM && (BF51x || BF52x || BF534 || BF536 || BF537)
default n
help
Enable PHY and PH6 GP Wake-Up (Voltage Regulator Power-Up)
source "drivers/cpufreq/Kconfig"
+config BFIN_CPU_FREQ
+ bool
+ depends on CPU_FREQ
+ select CPU_FREQ_TABLE
+ default y
+
config CPU_VOLTAGE
bool "CPU Voltage scaling"
- depends on EXPERIMENTAL
+ depends on EXPERIMENTAL
depends on CPU_FREQ
default n
help
Say Y here if you want CPU voltage scaling according to the CPU frequency.
This option violates the PLL BYPASS recommendation in the Blackfin Processor
- manuals. There is a theoretical risk that during VDDINT transitions
+ manuals. There is a theoretical risk that during VDDINT transitions
the PLL may unlock.
endmenu
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff