mainmenu "Blackfin Kernel Configuration"
+config SYMBOL_PREFIX
+ string
+ default "_"
+
config MMU
def_bool n
select HAVE_OPROFILE
select ARCH_WANT_OPTIONAL_GPIOLIB
+config GENERIC_CSUM
+ def_bool y
+
config GENERIC_BUG
def_bool y
depends on BUG
config GENERIC_FIND_NEXT_BIT
def_bool y
-config GENERIC_HWEIGHT
- def_bool y
-
config GENERIC_HARDIRQS
def_bool y
config GENERIC_IRQ_PROBE
def_bool y
+config GENERIC_HARDIRQS_NO__DO_IRQ
+ def_bool y
+
config GENERIC_GPIO
def_bool y
help
BF539 Processor Support.
-config BF542
+config BF542_std
bool "BF542"
help
BF542 Processor Support.
help
BF542 Processor Support.
-config BF544
+config BF544_std
bool "BF544"
help
BF544 Processor Support.
help
BF544 Processor Support.
-config BF547
+config BF547_std
bool "BF547"
help
BF547 Processor Support.
help
BF547 Processor Support.
-config BF548
+config BF548_std
bool "BF548"
help
BF548 Processor Support.
help
BF548 Processor Support.
-config BF549
+config BF549_std
bool "BF549"
help
BF549 Processor Support.
config SMP
depends on BF561
- select GENERIC_TIME
+ select TICKSOURCE_CORETMR
bool "Symmetric multi-processing support"
---help---
This enables support for systems with more than one CPU,
depends on SMP
default y
+config HAVE_LEGACY_PER_CPU_AREA
+ def_bool y
+ depends on SMP
+
config BF_REV_MIN
int
default 0 if (BF51x || BF52x || (BF54x && !BF54xM))
endchoice
-config BF51x
- bool
- depends on (BF512 || BF514 || BF516 || BF518)
- default y
-
-config BF52x
- bool
- depends on (BF522 || BF523 || BF524 || BF525 || BF526 || BF527)
- default y
-
config BF53x
bool
depends on (BF531 || BF532 || BF533 || BF534 || BF536 || BF537)
default y
-config BF54xM
- bool
- depends on (BF542M || BF544M || BF547M || BF548M || BF549M)
- default y
-
-config BF54x
- bool
- depends on (BF542 || BF544 || BF547 || BF548 || BF549 || BF54xM)
- default y
-
config MEM_GENERIC_BOARD
bool
depends on GENERIC_BOARD
config MEM_MT48LC16M16A2TG_75
bool
depends on (BFIN533_EZKIT || BFIN561_EZKIT \
- || BFIN533_BLUETECHNIX_CM || BFIN537_BLUETECHNIX_CM \
- || H8606_HVSISTEMAS || BFIN527_BLUETECHNIX_CM)
+ || BFIN533_BLUETECHNIX_CM || BFIN537_BLUETECHNIX_CM_E \
+ || BFIN537_BLUETECHNIX_CM_U || H8606_HVSISTEMAS \
+ || BFIN527_BLUETECHNIX_CM)
default y
config MEM_MT48LC32M8A2_75
config MEM_MT48LC32M16A2TG_75
bool
- depends on (BFIN527_EZKIT || BFIN532_IP0X || BLACKSTAMP)
+ depends on (BFIN527_EZKIT || BFIN527_EZKIT_V2 || BFIN532_IP0X || BLACKSTAMP)
default y
config MEM_MT48LC32M8A2_75
range 1 64
default "22" if BFIN533_EZKIT
default "45" if BFIN533_STAMP
- default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM || BFIN538_EZKIT)
+ default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN527_EZKIT_V2 || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM || BFIN538_EZKIT)
default "22" if BFIN533_BLUETECHNIX_CM
- default "20" if (BFIN537_BLUETECHNIX_CM || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM)
+ default "20" if (BFIN537_BLUETECHNIX_CM_E || BFIN537_BLUETECHNIX_CM_U || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM)
default "20" if BFIN561_EZKIT
default "16" if (H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD || BFIN518F_EZBRD)
help
default 400000000 if BF514
default 400000000 if BF516
default 400000000 if BF518
- default 600000000 if BF522
- default 400000000 if BF523
+ default 400000000 if BF522
+ default 600000000 if BF523
default 400000000 if BF524
default 600000000 if BF525
default 400000000 if BF526
source kernel/Kconfig.hz
config GENERIC_TIME
- bool "Generic time"
- default y
+ def_bool y
config GENERIC_CLOCKEVENTS
bool "Generic clock events"
- depends on GENERIC_TIME
default y
-choice
- prompt "Kernel Tick Source"
+menu "Clock event device"
depends on GENERIC_CLOCKEVENTS
- default TICKSOURCE_CORETMR
-
config TICKSOURCE_GPTMR0
- bool "Gptimer0 (SCLK domain)"
+ bool "GPTimer0"
+ depends on !SMP
select BFIN_GPTIMERS
config TICKSOURCE_CORETMR
- bool "Core timer (CCLK domain)"
-
-endchoice
+ bool "Core timer"
+ default y
+endmenu
-config CYCLES_CLOCKSOURCE
- bool "Use 'CYCLES' as a clocksource"
+menu "Clock souce"
depends on GENERIC_CLOCKEVENTS
+config CYCLES_CLOCKSOURCE
+ bool "CYCLES"
+ default y
depends on !BFIN_SCRATCH_REG_CYCLES
depends on !SMP
help
writing the registers will most likely crash the kernel.
config GPTMR0_CLOCKSOURCE
- bool "Use GPTimer0 as a clocksource (higher rating)"
+ bool "GPTimer0"
select BFIN_GPTIMERS
- depends on GENERIC_CLOCKEVENTS
depends on !TICKSOURCE_GPTMR0
+endmenu
+
+config ARCH_USES_GETTIMEOFFSET
+ depends on !GENERIC_CLOCKEVENTS
+ def_bool y
source kernel/time/Kconfig
bool "Enable 2M DMA region"
config DMA_UNCACHED_1M
bool "Enable 1M DMA region"
+config DMA_UNCACHED_512K
+ bool "Enable 512K DMA region"
+config DMA_UNCACHED_256K
+ bool "Enable 256K DMA region"
+config DMA_UNCACHED_128K
+ bool "Enable 128K DMA region"
config DMA_UNCACHED_NONE
bool "Disable DMA region"
endchoice
config BFIN_ICACHE
bool "Enable ICACHE"
default y
-config BFIN_ICACHE_LOCK
- bool "Enable Instruction Cache Locking"
- depends on BFIN_ICACHE
- default n
config BFIN_EXTMEM_ICACHEABLE
bool "Enable ICACHE for external memory"
depends on BFIN_ICACHE
source "drivers/pci/Kconfig"
-config HOTPLUG
- bool "Support for hot-pluggable device"
- help
- Say Y here if you want to plug devices into your computer while
- the system is running, and be able to use them quickly. In many
- cases, the devices can likewise be unplugged at any time too.
-
- One well known example of this is PCMCIA- or PC-cards, credit-card
- size devices such as network cards, modems or hard drives which are
- plugged into slots found on all modern laptop computers. Another
- example, used on modern desktops as well as laptops, is USB.
-
- Enable HOTPLUG and build a modular kernel. Get agent software
- (from <http://linux-hotplug.sourceforge.net/>) and install it.
- Then your kernel will automatically call out to a user mode "policy
- agent" (/sbin/hotplug) to load modules and set up software needed
- to use devices as you hotplug them.
-
source "drivers/pcmcia/Kconfig"
source "drivers/pci/hotplug/Kconfig"
source "drivers/Kconfig"
+source "drivers/firmware/Kconfig"
+
source "fs/Kconfig"
source "arch/blackfin/Kconfig.debug"
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff