#include <mach/irqs.h>
#include <mach/gpio.h>
#include <asm/mach/irq.h>
+#include <plat/powerdomain.h>
/*
* OMAP1510 GPIO registers
*/
-#define OMAP1510_GPIO_BASE OMAP1_IO_ADDRESS(0xfffce000)
+#define OMAP1510_GPIO_BASE 0xfffce000
#define OMAP1510_GPIO_DATA_INPUT 0x00
#define OMAP1510_GPIO_DATA_OUTPUT 0x04
#define OMAP1510_GPIO_DIR_CONTROL 0x08
/*
* OMAP1610 specific GPIO registers
*/
-#define OMAP1610_GPIO1_BASE OMAP1_IO_ADDRESS(0xfffbe400)
-#define OMAP1610_GPIO2_BASE OMAP1_IO_ADDRESS(0xfffbec00)
-#define OMAP1610_GPIO3_BASE OMAP1_IO_ADDRESS(0xfffbb400)
-#define OMAP1610_GPIO4_BASE OMAP1_IO_ADDRESS(0xfffbbc00)
+#define OMAP1610_GPIO1_BASE 0xfffbe400
+#define OMAP1610_GPIO2_BASE 0xfffbec00
+#define OMAP1610_GPIO3_BASE 0xfffbb400
+#define OMAP1610_GPIO4_BASE 0xfffbbc00
#define OMAP1610_GPIO_REVISION 0x0000
#define OMAP1610_GPIO_SYSCONFIG 0x0010
#define OMAP1610_GPIO_SYSSTATUS 0x0014
#define OMAP1610_GPIO_SET_DATAOUT 0x00f0
/*
- * OMAP730 specific GPIO registers
+ * OMAP7XX specific GPIO registers
*/
-#define OMAP730_GPIO1_BASE OMAP1_IO_ADDRESS(0xfffbc000)
-#define OMAP730_GPIO2_BASE OMAP1_IO_ADDRESS(0xfffbc800)
-#define OMAP730_GPIO3_BASE OMAP1_IO_ADDRESS(0xfffbd000)
-#define OMAP730_GPIO4_BASE OMAP1_IO_ADDRESS(0xfffbd800)
-#define OMAP730_GPIO5_BASE OMAP1_IO_ADDRESS(0xfffbe000)
-#define OMAP730_GPIO6_BASE OMAP1_IO_ADDRESS(0xfffbe800)
-#define OMAP730_GPIO_DATA_INPUT 0x00
-#define OMAP730_GPIO_DATA_OUTPUT 0x04
-#define OMAP730_GPIO_DIR_CONTROL 0x08
-#define OMAP730_GPIO_INT_CONTROL 0x0c
-#define OMAP730_GPIO_INT_MASK 0x10
-#define OMAP730_GPIO_INT_STATUS 0x14
-
-/*
- * OMAP850 specific GPIO registers
- */
-#define OMAP850_GPIO1_BASE OMAP1_IO_ADDRESS(0xfffbc000)
-#define OMAP850_GPIO2_BASE OMAP1_IO_ADDRESS(0xfffbc800)
-#define OMAP850_GPIO3_BASE OMAP1_IO_ADDRESS(0xfffbd000)
-#define OMAP850_GPIO4_BASE OMAP1_IO_ADDRESS(0xfffbd800)
-#define OMAP850_GPIO5_BASE OMAP1_IO_ADDRESS(0xfffbe000)
-#define OMAP850_GPIO6_BASE OMAP1_IO_ADDRESS(0xfffbe800)
-#define OMAP850_GPIO_DATA_INPUT 0x00
-#define OMAP850_GPIO_DATA_OUTPUT 0x04
-#define OMAP850_GPIO_DIR_CONTROL 0x08
-#define OMAP850_GPIO_INT_CONTROL 0x0c
-#define OMAP850_GPIO_INT_MASK 0x10
-#define OMAP850_GPIO_INT_STATUS 0x14
-
-#define OMAP1_MPUIO_VBASE OMAP1_IO_ADDRESS(OMAP1_MPUIO_BASE)
+#define OMAP7XX_GPIO1_BASE 0xfffbc000
+#define OMAP7XX_GPIO2_BASE 0xfffbc800
+#define OMAP7XX_GPIO3_BASE 0xfffbd000
+#define OMAP7XX_GPIO4_BASE 0xfffbd800
+#define OMAP7XX_GPIO5_BASE 0xfffbe000
+#define OMAP7XX_GPIO6_BASE 0xfffbe800
+#define OMAP7XX_GPIO_DATA_INPUT 0x00
+#define OMAP7XX_GPIO_DATA_OUTPUT 0x04
+#define OMAP7XX_GPIO_DIR_CONTROL 0x08
+#define OMAP7XX_GPIO_INT_CONTROL 0x0c
+#define OMAP7XX_GPIO_INT_MASK 0x10
+#define OMAP7XX_GPIO_INT_STATUS 0x14
+
+#define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE
/*
* omap24xx specific GPIO registers
*/
-#define OMAP242X_GPIO1_BASE OMAP2_IO_ADDRESS(0x48018000)
-#define OMAP242X_GPIO2_BASE OMAP2_IO_ADDRESS(0x4801a000)
-#define OMAP242X_GPIO3_BASE OMAP2_IO_ADDRESS(0x4801c000)
-#define OMAP242X_GPIO4_BASE OMAP2_IO_ADDRESS(0x4801e000)
+#define OMAP242X_GPIO1_BASE 0x48018000
+#define OMAP242X_GPIO2_BASE 0x4801a000
+#define OMAP242X_GPIO3_BASE 0x4801c000
+#define OMAP242X_GPIO4_BASE 0x4801e000
-#define OMAP243X_GPIO1_BASE OMAP2_IO_ADDRESS(0x4900C000)
-#define OMAP243X_GPIO2_BASE OMAP2_IO_ADDRESS(0x4900E000)
-#define OMAP243X_GPIO3_BASE OMAP2_IO_ADDRESS(0x49010000)
-#define OMAP243X_GPIO4_BASE OMAP2_IO_ADDRESS(0x49012000)
-#define OMAP243X_GPIO5_BASE OMAP2_IO_ADDRESS(0x480B6000)
+#define OMAP243X_GPIO1_BASE 0x4900C000
+#define OMAP243X_GPIO2_BASE 0x4900E000
+#define OMAP243X_GPIO3_BASE 0x49010000
+#define OMAP243X_GPIO4_BASE 0x49012000
+#define OMAP243X_GPIO5_BASE 0x480B6000
#define OMAP24XX_GPIO_REVISION 0x0000
#define OMAP24XX_GPIO_SYSCONFIG 0x0010
#define OMAP4_GPIO_IRQSTATUSCLR1 0x0040
#define OMAP4_GPIO_IRQWAKEN0 0x0044
#define OMAP4_GPIO_IRQWAKEN1 0x0048
-#define OMAP4_GPIO_SYSSTATUS 0x0104
+#define OMAP4_GPIO_SYSSTATUS 0x0114
+#define OMAP4_GPIO_IRQENABLE1 0x011c
+#define OMAP4_GPIO_WAKE_EN 0x0120
+#define OMAP4_GPIO_IRQSTATUS2 0x0128
+#define OMAP4_GPIO_IRQENABLE2 0x012c
#define OMAP4_GPIO_CTRL 0x0130
#define OMAP4_GPIO_OE 0x0134
#define OMAP4_GPIO_DATAIN 0x0138
#define OMAP4_GPIO_FALLINGDETECT 0x014c
#define OMAP4_GPIO_DEBOUNCENABLE 0x0150
#define OMAP4_GPIO_DEBOUNCINGTIME 0x0154
+#define OMAP4_GPIO_CLEARIRQENABLE1 0x0160
+#define OMAP4_GPIO_SETIRQENABLE1 0x0164
+#define OMAP4_GPIO_CLEARWKUENA 0x0180
+#define OMAP4_GPIO_SETWKUENA 0x0184
#define OMAP4_GPIO_CLEARDATAOUT 0x0190
#define OMAP4_GPIO_SETDATAOUT 0x0194
/*
* omap34xx specific GPIO registers
*/
-#define OMAP34XX_GPIO1_BASE OMAP2_IO_ADDRESS(0x48310000)
-#define OMAP34XX_GPIO2_BASE OMAP2_IO_ADDRESS(0x49050000)
-#define OMAP34XX_GPIO3_BASE OMAP2_IO_ADDRESS(0x49052000)
-#define OMAP34XX_GPIO4_BASE OMAP2_IO_ADDRESS(0x49054000)
-#define OMAP34XX_GPIO5_BASE OMAP2_IO_ADDRESS(0x49056000)
-#define OMAP34XX_GPIO6_BASE OMAP2_IO_ADDRESS(0x49058000)
+#define OMAP34XX_GPIO1_BASE 0x48310000
+#define OMAP34XX_GPIO2_BASE 0x49050000
+#define OMAP34XX_GPIO3_BASE 0x49052000
+#define OMAP34XX_GPIO4_BASE 0x49054000
+#define OMAP34XX_GPIO5_BASE 0x49056000
+#define OMAP34XX_GPIO6_BASE 0x49058000
/*
* OMAP44XX specific GPIO registers
*/
-#define OMAP44XX_GPIO1_BASE OMAP2_IO_ADDRESS(0x4a310000)
-#define OMAP44XX_GPIO2_BASE OMAP2_IO_ADDRESS(0x48055000)
-#define OMAP44XX_GPIO3_BASE OMAP2_IO_ADDRESS(0x48057000)
-#define OMAP44XX_GPIO4_BASE OMAP2_IO_ADDRESS(0x48059000)
-#define OMAP44XX_GPIO5_BASE OMAP2_IO_ADDRESS(0x4805B000)
-#define OMAP44XX_GPIO6_BASE OMAP2_IO_ADDRESS(0x4805D000)
+#define OMAP44XX_GPIO1_BASE 0x4a310000
+#define OMAP44XX_GPIO2_BASE 0x48055000
+#define OMAP44XX_GPIO3_BASE 0x48057000
+#define OMAP44XX_GPIO4_BASE 0x48059000
+#define OMAP44XX_GPIO5_BASE 0x4805B000
+#define OMAP44XX_GPIO6_BASE 0x4805D000
struct gpio_bank {
+ unsigned long pbase;
void __iomem *base;
u16 irq;
u16 virtual_irq_start;
int method;
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
- defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
u32 suspend_wakeup;
u32 saved_wakeup;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
- defined(CONFIG_ARCH_OMAP4)
+#ifdef CONFIG_ARCH_OMAP2PLUS
u32 non_wakeup_gpios;
u32 enabled_non_wakeup_gpios;
u32 saved_risingdetect;
#endif
u32 level_mask;
+ u32 toggle_mask;
spinlock_t lock;
struct gpio_chip chip;
struct clk *dbck;
+ u32 mod_usage;
+ u32 dbck_enable_mask;
};
#define METHOD_MPUIO 0
#define METHOD_GPIO_1510 1
#define METHOD_GPIO_1610 2
-#define METHOD_GPIO_730 3
-#define METHOD_GPIO_850 4
+#define METHOD_GPIO_7XX 3
#define METHOD_GPIO_24XX 5
+#define METHOD_GPIO_44XX 6
#ifdef CONFIG_ARCH_OMAP16XX
static struct gpio_bank gpio_bank_1610[5] = {
- { OMAP1_MPUIO_VBASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO},
- { OMAP1610_GPIO1_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1610 },
- { OMAP1610_GPIO2_BASE, INT_1610_GPIO_BANK2, IH_GPIO_BASE + 16, METHOD_GPIO_1610 },
- { OMAP1610_GPIO3_BASE, INT_1610_GPIO_BANK3, IH_GPIO_BASE + 32, METHOD_GPIO_1610 },
- { OMAP1610_GPIO4_BASE, INT_1610_GPIO_BANK4, IH_GPIO_BASE + 48, METHOD_GPIO_1610 },
+ { OMAP1_MPUIO_VBASE, NULL, INT_MPUIO, IH_MPUIO_BASE,
+ METHOD_MPUIO },
+ { OMAP1610_GPIO1_BASE, NULL, INT_GPIO_BANK1, IH_GPIO_BASE,
+ METHOD_GPIO_1610 },
+ { OMAP1610_GPIO2_BASE, NULL, INT_1610_GPIO_BANK2, IH_GPIO_BASE + 16,
+ METHOD_GPIO_1610 },
+ { OMAP1610_GPIO3_BASE, NULL, INT_1610_GPIO_BANK3, IH_GPIO_BASE + 32,
+ METHOD_GPIO_1610 },
+ { OMAP1610_GPIO4_BASE, NULL, INT_1610_GPIO_BANK4, IH_GPIO_BASE + 48,
+ METHOD_GPIO_1610 },
};
#endif
#ifdef CONFIG_ARCH_OMAP15XX
static struct gpio_bank gpio_bank_1510[2] = {
- { OMAP1_MPUIO_VBASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO },
- { OMAP1510_GPIO_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1510 }
-};
-#endif
-
-#ifdef CONFIG_ARCH_OMAP730
-static struct gpio_bank gpio_bank_730[7] = {
- { OMAP1_MPUIO_VBASE, INT_730_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO },
- { OMAP730_GPIO1_BASE, INT_730_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_730 },
- { OMAP730_GPIO2_BASE, INT_730_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_730 },
- { OMAP730_GPIO3_BASE, INT_730_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_730 },
- { OMAP730_GPIO4_BASE, INT_730_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_730 },
- { OMAP730_GPIO5_BASE, INT_730_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_730 },
- { OMAP730_GPIO6_BASE, INT_730_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_730 },
+ { OMAP1_MPUIO_VBASE, NULL, INT_MPUIO, IH_MPUIO_BASE,
+ METHOD_MPUIO },
+ { OMAP1510_GPIO_BASE, NULL, INT_GPIO_BANK1, IH_GPIO_BASE,
+ METHOD_GPIO_1510 }
};
#endif
-#ifdef CONFIG_ARCH_OMAP850
-static struct gpio_bank gpio_bank_850[7] = {
- { OMAP1_MPUIO_VBASE, INT_850_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO },
- { OMAP850_GPIO1_BASE, INT_850_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_850 },
- { OMAP850_GPIO2_BASE, INT_850_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_850 },
- { OMAP850_GPIO3_BASE, INT_850_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_850 },
- { OMAP850_GPIO4_BASE, INT_850_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_850 },
- { OMAP850_GPIO5_BASE, INT_850_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_850 },
- { OMAP850_GPIO6_BASE, INT_850_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_850 },
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+static struct gpio_bank gpio_bank_7xx[7] = {
+ { OMAP1_MPUIO_VBASE, NULL, INT_7XX_MPUIO, IH_MPUIO_BASE,
+ METHOD_MPUIO },
+ { OMAP7XX_GPIO1_BASE, NULL, INT_7XX_GPIO_BANK1, IH_GPIO_BASE,
+ METHOD_GPIO_7XX },
+ { OMAP7XX_GPIO2_BASE, NULL, INT_7XX_GPIO_BANK2, IH_GPIO_BASE + 32,
+ METHOD_GPIO_7XX },
+ { OMAP7XX_GPIO3_BASE, NULL, INT_7XX_GPIO_BANK3, IH_GPIO_BASE + 64,
+ METHOD_GPIO_7XX },
+ { OMAP7XX_GPIO4_BASE, NULL, INT_7XX_GPIO_BANK4, IH_GPIO_BASE + 96,
+ METHOD_GPIO_7XX },
+ { OMAP7XX_GPIO5_BASE, NULL, INT_7XX_GPIO_BANK5, IH_GPIO_BASE + 128,
+ METHOD_GPIO_7XX },
+ { OMAP7XX_GPIO6_BASE, NULL, INT_7XX_GPIO_BANK6, IH_GPIO_BASE + 160,
+ METHOD_GPIO_7XX },
};
#endif
-
-#ifdef CONFIG_ARCH_OMAP24XX
+#ifdef CONFIG_ARCH_OMAP2
static struct gpio_bank gpio_bank_242x[4] = {
- { OMAP242X_GPIO1_BASE, INT_24XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX },
- { OMAP242X_GPIO2_BASE, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_24XX },
- { OMAP242X_GPIO3_BASE, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_24XX },
- { OMAP242X_GPIO4_BASE, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_24XX },
+ { OMAP242X_GPIO1_BASE, NULL, INT_24XX_GPIO_BANK1, IH_GPIO_BASE,
+ METHOD_GPIO_24XX },
+ { OMAP242X_GPIO2_BASE, NULL, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32,
+ METHOD_GPIO_24XX },
+ { OMAP242X_GPIO3_BASE, NULL, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64,
+ METHOD_GPIO_24XX },
+ { OMAP242X_GPIO4_BASE, NULL, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96,
+ METHOD_GPIO_24XX },
};
static struct gpio_bank gpio_bank_243x[5] = {
- { OMAP243X_GPIO1_BASE, INT_24XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX },
- { OMAP243X_GPIO2_BASE, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_24XX },
- { OMAP243X_GPIO3_BASE, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_24XX },
- { OMAP243X_GPIO4_BASE, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_24XX },
- { OMAP243X_GPIO5_BASE, INT_24XX_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_24XX },
+ { OMAP243X_GPIO1_BASE, NULL, INT_24XX_GPIO_BANK1, IH_GPIO_BASE,
+ METHOD_GPIO_24XX },
+ { OMAP243X_GPIO2_BASE, NULL, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32,
+ METHOD_GPIO_24XX },
+ { OMAP243X_GPIO3_BASE, NULL, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64,
+ METHOD_GPIO_24XX },
+ { OMAP243X_GPIO4_BASE, NULL, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96,
+ METHOD_GPIO_24XX },
+ { OMAP243X_GPIO5_BASE, NULL, INT_24XX_GPIO_BANK5, IH_GPIO_BASE + 128,
+ METHOD_GPIO_24XX },
};
#endif
-#ifdef CONFIG_ARCH_OMAP34XX
+#ifdef CONFIG_ARCH_OMAP3
static struct gpio_bank gpio_bank_34xx[6] = {
- { OMAP34XX_GPIO1_BASE, INT_34XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX },
- { OMAP34XX_GPIO2_BASE, INT_34XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_24XX },
- { OMAP34XX_GPIO3_BASE, INT_34XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_24XX },
- { OMAP34XX_GPIO4_BASE, INT_34XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_24XX },
- { OMAP34XX_GPIO5_BASE, INT_34XX_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_24XX },
- { OMAP34XX_GPIO6_BASE, INT_34XX_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_24XX },
-};
-
-#endif
-
-#ifdef CONFIG_ARCH_OMAP4
-static struct gpio_bank gpio_bank_44xx[6] = {
- { OMAP44XX_GPIO1_BASE, INT_44XX_GPIO_BANK1, IH_GPIO_BASE, \
+ { OMAP34XX_GPIO1_BASE, NULL, INT_34XX_GPIO_BANK1, IH_GPIO_BASE,
METHOD_GPIO_24XX },
- { OMAP44XX_GPIO2_BASE, INT_44XX_GPIO_BANK2, IH_GPIO_BASE + 32, \
+ { OMAP34XX_GPIO2_BASE, NULL, INT_34XX_GPIO_BANK2, IH_GPIO_BASE + 32,
METHOD_GPIO_24XX },
- { OMAP44XX_GPIO3_BASE, INT_44XX_GPIO_BANK3, IH_GPIO_BASE + 64, \
+ { OMAP34XX_GPIO3_BASE, NULL, INT_34XX_GPIO_BANK3, IH_GPIO_BASE + 64,
METHOD_GPIO_24XX },
- { OMAP44XX_GPIO4_BASE, INT_44XX_GPIO_BANK4, IH_GPIO_BASE + 96, \
+ { OMAP34XX_GPIO4_BASE, NULL, INT_34XX_GPIO_BANK4, IH_GPIO_BASE + 96,
METHOD_GPIO_24XX },
- { OMAP44XX_GPIO5_BASE, INT_44XX_GPIO_BANK5, IH_GPIO_BASE + 128, \
+ { OMAP34XX_GPIO5_BASE, NULL, INT_34XX_GPIO_BANK5, IH_GPIO_BASE + 128,
METHOD_GPIO_24XX },
- { OMAP44XX_GPIO6_BASE, INT_44XX_GPIO_BANK6, IH_GPIO_BASE + 160, \
+ { OMAP34XX_GPIO6_BASE, NULL, INT_34XX_GPIO_BANK6, IH_GPIO_BASE + 160,
METHOD_GPIO_24XX },
};
+struct omap3_gpio_regs {
+ u32 sysconfig;
+ u32 irqenable1;
+ u32 irqenable2;
+ u32 wake_en;
+ u32 ctrl;
+ u32 oe;
+ u32 leveldetect0;
+ u32 leveldetect1;
+ u32 risingdetect;
+ u32 fallingdetect;
+ u32 dataout;
+};
+
+static struct omap3_gpio_regs gpio_context[OMAP34XX_NR_GPIOS];
+#endif
+
+#ifdef CONFIG_ARCH_OMAP4
+static struct gpio_bank gpio_bank_44xx[6] = {
+ { OMAP44XX_GPIO1_BASE, NULL, OMAP44XX_IRQ_GPIO1, IH_GPIO_BASE,
+ METHOD_GPIO_44XX },
+ { OMAP44XX_GPIO2_BASE, NULL, OMAP44XX_IRQ_GPIO2, IH_GPIO_BASE + 32,
+ METHOD_GPIO_44XX },
+ { OMAP44XX_GPIO3_BASE, NULL, OMAP44XX_IRQ_GPIO3, IH_GPIO_BASE + 64,
+ METHOD_GPIO_44XX },
+ { OMAP44XX_GPIO4_BASE, NULL, OMAP44XX_IRQ_GPIO4, IH_GPIO_BASE + 96,
+ METHOD_GPIO_44XX },
+ { OMAP44XX_GPIO5_BASE, NULL, OMAP44XX_IRQ_GPIO5, IH_GPIO_BASE + 128,
+ METHOD_GPIO_44XX },
+ { OMAP44XX_GPIO6_BASE, NULL, OMAP44XX_IRQ_GPIO6, IH_GPIO_BASE + 160,
+ METHOD_GPIO_44XX },
+};
+
#endif
static struct gpio_bank *gpio_bank;
static int check_gpio(int gpio)
{
- if (unlikely(gpio_valid(gpio)) < 0) {
+ if (unlikely(gpio_valid(gpio) < 0)) {
printk(KERN_ERR "omap-gpio: invalid GPIO %d\n", gpio);
dump_stack();
return -1;
reg += OMAP1610_GPIO_DIRECTION;
break;
#endif
-#ifdef CONFIG_ARCH_OMAP730
- case METHOD_GPIO_730:
- reg += OMAP730_GPIO_DIR_CONTROL;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP850
- case METHOD_GPIO_850:
- reg += OMAP850_GPIO_DIR_CONTROL;
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+ case METHOD_GPIO_7XX:
+ reg += OMAP7XX_GPIO_DIR_CONTROL;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_OE;
break;
#endif
#if defined(CONFIG_ARCH_OMAP4)
- case METHOD_GPIO_24XX:
+ case METHOD_GPIO_44XX:
reg += OMAP4_GPIO_OE;
break;
#endif
l = 1 << gpio;
break;
#endif
-#ifdef CONFIG_ARCH_OMAP730
- case METHOD_GPIO_730:
- reg += OMAP730_GPIO_DATA_OUTPUT;
- l = __raw_readl(reg);
- if (enable)
- l |= 1 << gpio;
- else
- l &= ~(1 << gpio);
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP850
- case METHOD_GPIO_850:
- reg += OMAP850_GPIO_DATA_OUTPUT;
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+ case METHOD_GPIO_7XX:
+ reg += OMAP7XX_GPIO_DATA_OUTPUT;
l = __raw_readl(reg);
if (enable)
l |= 1 << gpio;
l &= ~(1 << gpio);
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
case METHOD_GPIO_24XX:
if (enable)
reg += OMAP24XX_GPIO_SETDATAOUT;
break;
#endif
#ifdef CONFIG_ARCH_OMAP4
- case METHOD_GPIO_24XX:
+ case METHOD_GPIO_44XX:
if (enable)
reg += OMAP4_GPIO_SETDATAOUT;
else
reg += OMAP1610_GPIO_DATAIN;
break;
#endif
-#ifdef CONFIG_ARCH_OMAP730
- case METHOD_GPIO_730:
- reg += OMAP730_GPIO_DATA_INPUT;
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+ case METHOD_GPIO_7XX:
+ reg += OMAP7XX_GPIO_DATA_INPUT;
break;
#endif
-#ifdef CONFIG_ARCH_OMAP850
- case METHOD_GPIO_850:
- reg += OMAP850_GPIO_DATA_INPUT;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_DATAIN;
break;
#endif
#ifdef CONFIG_ARCH_OMAP4
- case METHOD_GPIO_24XX:
+ case METHOD_GPIO_44XX:
reg += OMAP4_GPIO_DATAIN;
break;
#endif
reg += OMAP1610_GPIO_DATAOUT;
break;
#endif
-#ifdef CONFIG_ARCH_OMAP730
- case METHOD_GPIO_730:
- reg += OMAP730_GPIO_DATA_OUTPUT;
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+ case METHOD_GPIO_7XX:
+ reg += OMAP7XX_GPIO_DATA_OUTPUT;
break;
#endif
-#ifdef CONFIG_ARCH_OMAP850
- case METHOD_GPIO_850:
- reg += OMAP850_GPIO_DATA_OUTPUT;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
- defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_DATAOUT;
break;
#endif
+#ifdef CONFIG_ARCH_OMAP4
+ case METHOD_GPIO_44XX:
+ reg += OMAP4_GPIO_DATAOUT;
+ break;
+#endif
default:
return -EINVAL;
}
__raw_writel(l, base + reg); \
} while(0)
-void omap_set_gpio_debounce(int gpio, int enable)
+/**
+ * _set_gpio_debounce - low level gpio debounce time
+ * @bank: the gpio bank we're acting upon
+ * @gpio: the gpio number on this @gpio
+ * @debounce: debounce time to use
+ *
+ * OMAP's debounce time is in 31us steps so we need
+ * to convert and round up to the closest unit.
+ */
+static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio,
+ unsigned debounce)
{
- struct gpio_bank *bank;
- void __iomem *reg;
- unsigned long flags;
- u32 val, l = 1 << get_gpio_index(gpio);
+ void __iomem *reg = bank->base;
+ u32 val;
+ u32 l;
+
+ if (debounce < 32)
+ debounce = 0x01;
+ else if (debounce > 7936)
+ debounce = 0xff;
+ else
+ debounce = (debounce / 0x1f) - 1;
- if (cpu_class_is_omap1())
- return;
+ l = 1 << get_gpio_index(gpio);
+
+ if (cpu_is_omap44xx())
+ reg += OMAP4_GPIO_DEBOUNCINGTIME;
+ else
+ reg += OMAP24XX_GPIO_DEBOUNCE_VAL;
+
+ __raw_writel(debounce, reg);
- bank = get_gpio_bank(gpio);
reg = bank->base;
-#ifdef CONFIG_ARCH_OMAP4
- reg += OMAP4_GPIO_DEBOUNCENABLE;
-#else
- reg += OMAP24XX_GPIO_DEBOUNCE_EN;
-#endif
+ if (cpu_is_omap44xx())
+ reg += OMAP4_GPIO_DEBOUNCENABLE;
+ else
+ reg += OMAP24XX_GPIO_DEBOUNCE_EN;
- spin_lock_irqsave(&bank->lock, flags);
val = __raw_readl(reg);
- if (enable && !(val & l))
+ if (debounce) {
val |= l;
- else if (!enable && (val & l))
- val &= ~l;
- else
- goto done;
-
- if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
- if (enable)
+ if (cpu_is_omap34xx() || cpu_is_omap44xx())
clk_enable(bank->dbck);
- else
+ } else {
+ val &= ~l;
+ if (cpu_is_omap34xx() || cpu_is_omap44xx())
clk_disable(bank->dbck);
}
__raw_writel(val, reg);
-done:
- spin_unlock_irqrestore(&bank->lock, flags);
-}
-EXPORT_SYMBOL(omap_set_gpio_debounce);
-
-void omap_set_gpio_debounce_time(int gpio, int enc_time)
-{
- struct gpio_bank *bank;
- void __iomem *reg;
-
- if (cpu_class_is_omap1())
- return;
-
- bank = get_gpio_bank(gpio);
- reg = bank->base;
-
- enc_time &= 0xff;
-#ifdef CONFIG_ARCH_OMAP4
- reg += OMAP4_GPIO_DEBOUNCINGTIME;
-#else
- reg += OMAP24XX_GPIO_DEBOUNCE_VAL;
-#endif
- __raw_writel(enc_time, reg);
}
-EXPORT_SYMBOL(omap_set_gpio_debounce_time);
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
- defined(CONFIG_ARCH_OMAP4)
+#ifdef CONFIG_ARCH_OMAP2PLUS
static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
int trigger)
{
OMAP4_GPIO_IRQWAKEN0);
}
} else {
- if (trigger != 0)
+ /*
+ * GPIO wakeup request can only be generated on edge
+ * transitions
+ */
+ if (trigger & IRQ_TYPE_EDGE_BOTH)
__raw_writel(1 << gpio, bank->base
+ OMAP24XX_GPIO_SETWKUENA);
else
__raw_writel(1 << gpio, bank->base
+ OMAP24XX_GPIO_CLEARWKUENA);
}
- } else {
- if (trigger != 0)
+ }
+ /* This part needs to be executed always for OMAP34xx */
+ if (cpu_is_omap34xx() || (bank->non_wakeup_gpios & gpio_bit)) {
+ /*
+ * Log the edge gpio and manually trigger the IRQ
+ * after resume if the input level changes
+ * to avoid irq lost during PER RET/OFF mode
+ * Applies for omap2 non-wakeup gpio and all omap3 gpios
+ */
+ if (trigger & IRQ_TYPE_EDGE_BOTH)
bank->enabled_non_wakeup_gpios |= gpio_bit;
else
bank->enabled_non_wakeup_gpios &= ~gpio_bit;
}
#endif
+#ifdef CONFIG_ARCH_OMAP1
+/*
+ * This only applies to chips that can't do both rising and falling edge
+ * detection at once. For all other chips, this function is a noop.
+ */
+static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio)
+{
+ void __iomem *reg = bank->base;
+ u32 l = 0;
+
+ switch (bank->method) {
+ case METHOD_MPUIO:
+ reg += OMAP_MPUIO_GPIO_INT_EDGE;
+ break;
+#ifdef CONFIG_ARCH_OMAP15XX
+ case METHOD_GPIO_1510:
+ reg += OMAP1510_GPIO_INT_CONTROL;
+ break;
+#endif
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+ case METHOD_GPIO_7XX:
+ reg += OMAP7XX_GPIO_INT_CONTROL;
+ break;
+#endif
+ default:
+ return;
+ }
+
+ l = __raw_readl(reg);
+ if ((l >> gpio) & 1)
+ l &= ~(1 << gpio);
+ else
+ l |= 1 << gpio;
+
+ __raw_writel(l, reg);
+}
+#endif
+
static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
{
void __iomem *reg = bank->base;
case METHOD_MPUIO:
reg += OMAP_MPUIO_GPIO_INT_EDGE;
l = __raw_readl(reg);
+ if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
+ bank->toggle_mask |= 1 << gpio;
if (trigger & IRQ_TYPE_EDGE_RISING)
l |= 1 << gpio;
else if (trigger & IRQ_TYPE_EDGE_FALLING)
case METHOD_GPIO_1510:
reg += OMAP1510_GPIO_INT_CONTROL;
l = __raw_readl(reg);
+ if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
+ bank->toggle_mask |= 1 << gpio;
if (trigger & IRQ_TYPE_EDGE_RISING)
l |= 1 << gpio;
else if (trigger & IRQ_TYPE_EDGE_FALLING)
__raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA);
break;
#endif
-#ifdef CONFIG_ARCH_OMAP730
- case METHOD_GPIO_730:
- reg += OMAP730_GPIO_INT_CONTROL;
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+ case METHOD_GPIO_7XX:
+ reg += OMAP7XX_GPIO_INT_CONTROL;
l = __raw_readl(reg);
+ if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
+ bank->toggle_mask |= 1 << gpio;
if (trigger & IRQ_TYPE_EDGE_RISING)
l |= 1 << gpio;
else if (trigger & IRQ_TYPE_EDGE_FALLING)
goto bad;
break;
#endif
-#ifdef CONFIG_ARCH_OMAP850
- case METHOD_GPIO_850:
- reg += OMAP850_GPIO_INT_CONTROL;
- l = __raw_readl(reg);
- if (trigger & IRQ_TYPE_EDGE_RISING)
- l |= 1 << gpio;
- else if (trigger & IRQ_TYPE_EDGE_FALLING)
- l &= ~(1 << gpio);
- else
- goto bad;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
- defined(CONFIG_ARCH_OMAP4)
+#ifdef CONFIG_ARCH_OMAP2PLUS
case METHOD_GPIO_24XX:
+ case METHOD_GPIO_44XX:
set_24xx_gpio_triggering(bank, gpio, trigger);
break;
#endif
reg += OMAP1610_GPIO_IRQSTATUS1;
break;
#endif
-#ifdef CONFIG_ARCH_OMAP730
- case METHOD_GPIO_730:
- reg += OMAP730_GPIO_INT_STATUS;
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+ case METHOD_GPIO_7XX:
+ reg += OMAP7XX_GPIO_INT_STATUS;
break;
#endif
-#ifdef CONFIG_ARCH_OMAP850
- case METHOD_GPIO_850:
- reg += OMAP850_GPIO_INT_STATUS;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_IRQSTATUS1;
break;
#endif
#if defined(CONFIG_ARCH_OMAP4)
- case METHOD_GPIO_24XX:
+ case METHOD_GPIO_44XX:
reg += OMAP4_GPIO_IRQSTATUS0;
break;
#endif
__raw_writel(gpio_mask, reg);
/* Workaround for clearing DSP GPIO interrupts to allow retention */
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
- reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2;
-#endif
-#if defined(CONFIG_ARCH_OMAP4)
- reg = bank->base + OMAP4_GPIO_IRQSTATUS1;
-#endif
+ if (cpu_is_omap24xx() || cpu_is_omap34xx())
+ reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2;
+ else if (cpu_is_omap44xx())
+ reg = bank->base + OMAP4_GPIO_IRQSTATUS1;
+
if (cpu_is_omap24xx() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
__raw_writel(gpio_mask, reg);
mask = 0xffff;
break;
#endif
-#ifdef CONFIG_ARCH_OMAP730
- case METHOD_GPIO_730:
- reg += OMAP730_GPIO_INT_MASK;
- mask = 0xffffffff;
- inv = 1;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP850
- case METHOD_GPIO_850:
- reg += OMAP850_GPIO_INT_MASK;
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+ case METHOD_GPIO_7XX:
+ reg += OMAP7XX_GPIO_INT_MASK;
mask = 0xffffffff;
inv = 1;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_IRQENABLE1;
mask = 0xffffffff;
break;
#endif
#if defined(CONFIG_ARCH_OMAP4)
- case METHOD_GPIO_24XX:
+ case METHOD_GPIO_44XX:
reg += OMAP4_GPIO_IRQSTATUSSET0;
mask = 0xffffffff;
break;
l = gpio_mask;
break;
#endif
-#ifdef CONFIG_ARCH_OMAP730
- case METHOD_GPIO_730:
- reg += OMAP730_GPIO_INT_MASK;
- l = __raw_readl(reg);
- if (enable)
- l &= ~(gpio_mask);
- else
- l |= gpio_mask;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP850
- case METHOD_GPIO_850:
- reg += OMAP850_GPIO_INT_MASK;
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+ case METHOD_GPIO_7XX:
+ reg += OMAP7XX_GPIO_INT_MASK;
l = __raw_readl(reg);
if (enable)
l &= ~(gpio_mask);
l |= gpio_mask;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
case METHOD_GPIO_24XX:
if (enable)
reg += OMAP24XX_GPIO_SETIRQENABLE1;
break;
#endif
#ifdef CONFIG_ARCH_OMAP4
- case METHOD_GPIO_24XX:
+ case METHOD_GPIO_44XX:
if (enable)
reg += OMAP4_GPIO_IRQSTATUSSET0;
else
*/
static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
{
- unsigned long flags;
+ unsigned long uninitialized_var(flags);
switch (bank->method) {
#ifdef CONFIG_ARCH_OMAP16XX
spin_unlock_irqrestore(&bank->lock, flags);
return 0;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
- defined(CONFIG_ARCH_OMAP4)
+#ifdef CONFIG_ARCH_OMAP2PLUS
case METHOD_GPIO_24XX:
+ case METHOD_GPIO_44XX:
if (bank->non_wakeup_gpios & (1 << gpio)) {
printk(KERN_ERR "Unable to modify wakeup on "
"non-wakeup GPIO%d\n",
__raw_writel(__raw_readl(reg) | (1 << offset), reg);
}
#endif
+ if (!cpu_class_is_omap1()) {
+ if (!bank->mod_usage) {
+ void __iomem *reg = bank->base;
+ u32 ctrl;
+
+ if (cpu_is_omap24xx() || cpu_is_omap34xx())
+ reg += OMAP24XX_GPIO_CTRL;
+ else if (cpu_is_omap44xx())
+ reg += OMAP4_GPIO_CTRL;
+ ctrl = __raw_readl(reg);
+ /* Module is enabled, clocks are not gated */
+ ctrl &= 0xFFFFFFFE;
+ __raw_writel(ctrl, reg);
+ }
+ bank->mod_usage |= 1 << offset;
+ }
spin_unlock_irqrestore(&bank->lock, flags);
return 0;
__raw_writel(1 << offset, reg);
}
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
- defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
if (bank->method == METHOD_GPIO_24XX) {
/* Disable wake-up during idle for dynamic tick */
void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
__raw_writel(1 << offset, reg);
}
#endif
+#ifdef CONFIG_ARCH_OMAP4
+ if (bank->method == METHOD_GPIO_44XX) {
+ /* Disable wake-up during idle for dynamic tick */
+ void __iomem *reg = bank->base + OMAP4_GPIO_IRQWAKEN0;
+ __raw_writel(1 << offset, reg);
+ }
+#endif
+ if (!cpu_class_is_omap1()) {
+ bank->mod_usage &= ~(1 << offset);
+ if (!bank->mod_usage) {
+ void __iomem *reg = bank->base;
+ u32 ctrl;
+
+ if (cpu_is_omap24xx() || cpu_is_omap34xx())
+ reg += OMAP24XX_GPIO_CTRL;
+ else if (cpu_is_omap44xx())
+ reg += OMAP4_GPIO_CTRL;
+ ctrl = __raw_readl(reg);
+ /* Module is disabled, clocks are gated */
+ ctrl |= 1;
+ __raw_writel(ctrl, reg);
+ }
+ }
_reset_gpio(bank, bank->chip.base + offset);
spin_unlock_irqrestore(&bank->lock, flags);
}
{
void __iomem *isr_reg = NULL;
u32 isr;
- unsigned int gpio_irq;
+ unsigned int gpio_irq, gpio_index;
struct gpio_bank *bank;
u32 retrigger = 0;
int unmasked = 0;
if (bank->method == METHOD_GPIO_1610)
isr_reg = bank->base + OMAP1610_GPIO_IRQSTATUS1;
#endif
-#ifdef CONFIG_ARCH_OMAP730
- if (bank->method == METHOD_GPIO_730)
- isr_reg = bank->base + OMAP730_GPIO_INT_STATUS;
-#endif
-#ifdef CONFIG_ARCH_OMAP850
- if (bank->method == METHOD_GPIO_850)
- isr_reg = bank->base + OMAP850_GPIO_INT_STATUS;
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+ if (bank->method == METHOD_GPIO_7XX)
+ isr_reg = bank->base + OMAP7XX_GPIO_INT_STATUS;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
if (bank->method == METHOD_GPIO_24XX)
isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1;
#endif
#if defined(CONFIG_ARCH_OMAP4)
- if (bank->method == METHOD_GPIO_24XX)
+ if (bank->method == METHOD_GPIO_44XX)
isr_reg = bank->base + OMAP4_GPIO_IRQSTATUS0;
#endif
while(1) {
gpio_irq = bank->virtual_irq_start;
for (; isr != 0; isr >>= 1, gpio_irq++) {
+ gpio_index = get_gpio_index(irq_to_gpio(gpio_irq));
+
if (!(isr & 1))
continue;
+#ifdef CONFIG_ARCH_OMAP1
+ /*
+ * Some chips can't respond to both rising and falling
+ * at the same time. If this irq was requested with
+ * both flags, we need to flip the ICR data for the IRQ
+ * to respond to the IRQ for the opposite direction.
+ * This will be indicated in the bank toggle_mask.
+ */
+ if (bank->toggle_mask & (1 << gpio_index))
+ _toggle_gpio_edge_triggering(bank, gpio_index);
+#endif
+
generic_handle_irq(gpio_irq);
}
}
return 0;
}
-static struct dev_pm_ops omap_mpuio_dev_pm_ops = {
+static const struct dev_pm_ops omap_mpuio_dev_pm_ops = {
.suspend_noirq = omap_mpuio_suspend_noirq,
.resume_noirq = omap_mpuio_resume_noirq,
};
case METHOD_GPIO_1610:
reg += OMAP1610_GPIO_DIRECTION;
break;
- case METHOD_GPIO_730:
- reg += OMAP730_GPIO_DIR_CONTROL;
- break;
- case METHOD_GPIO_850:
- reg += OMAP850_GPIO_DIR_CONTROL;
+ case METHOD_GPIO_7XX:
+ reg += OMAP7XX_GPIO_DIR_CONTROL;
break;
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_OE;
break;
+ case METHOD_GPIO_44XX:
+ reg += OMAP4_GPIO_OE;
+ break;
+ default:
+ WARN_ONCE(1, "gpio_is_input: incorrect OMAP GPIO method");
+ return -EINVAL;
}
return __raw_readl(reg) & mask;
}
return 0;
}
+static int gpio_debounce(struct gpio_chip *chip, unsigned offset,
+ unsigned debounce)
+{
+ struct gpio_bank *bank;
+ unsigned long flags;
+
+ bank = container_of(chip, struct gpio_bank, chip);
+ spin_lock_irqsave(&bank->lock, flags);
+ _set_gpio_debounce(bank, offset, debounce);
+ spin_unlock_irqrestore(&bank->lock, flags);
+
+ return 0;
+}
+
static void gpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
struct gpio_bank *bank;
/*---------------------------------------------------------------------*/
static int initialized;
-#if !(defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4))
+#if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP2)
static struct clk * gpio_ick;
#endif
static struct clk *gpio_iclks[OMAP34XX_NR_GPIOS];
#endif
+static void __init omap_gpio_show_rev(void)
+{
+ u32 rev;
+
+ if (cpu_is_omap16xx())
+ rev = __raw_readw(gpio_bank[1].base + OMAP1610_GPIO_REVISION);
+ else if (cpu_is_omap24xx() || cpu_is_omap34xx())
+ rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
+ else if (cpu_is_omap44xx())
+ rev = __raw_readl(gpio_bank[0].base + OMAP4_GPIO_REVISION);
+ else
+ return;
+
+ printk(KERN_INFO "OMAP GPIO hardware version %d.%d\n",
+ (rev >> 4) & 0x0f, rev & 0x0f);
+}
+
/* This lock class tells lockdep that GPIO irqs are in a different
* category than their parents, so it won't report false recursion.
*/
int i;
int gpio = 0;
struct gpio_bank *bank;
+ int bank_size = SZ_8K; /* Module 4KB + L4 4KB except on omap1 */
char clk_name[11];
initialized = 1;
#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap15xx()) {
- printk(KERN_INFO "OMAP1510 GPIO hardware\n");
gpio_bank_count = 2;
gpio_bank = gpio_bank_1510;
+ bank_size = SZ_2K;
}
#endif
#if defined(CONFIG_ARCH_OMAP16XX)
if (cpu_is_omap16xx()) {
- u32 rev;
-
gpio_bank_count = 5;
gpio_bank = gpio_bank_1610;
- rev = __raw_readw(gpio_bank[1].base + OMAP1610_GPIO_REVISION);
- printk(KERN_INFO "OMAP GPIO hardware version %d.%d\n",
- (rev >> 4) & 0x0f, rev & 0x0f);
- }
-#endif
-#ifdef CONFIG_ARCH_OMAP730
- if (cpu_is_omap730()) {
- printk(KERN_INFO "OMAP730 GPIO hardware\n");
- gpio_bank_count = 7;
- gpio_bank = gpio_bank_730;
+ bank_size = SZ_2K;
}
#endif
-#ifdef CONFIG_ARCH_OMAP850
- if (cpu_is_omap850()) {
- printk(KERN_INFO "OMAP850 GPIO hardware\n");
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+ if (cpu_is_omap7xx()) {
gpio_bank_count = 7;
- gpio_bank = gpio_bank_850;
+ gpio_bank = gpio_bank_7xx;
+ bank_size = SZ_2K;
}
#endif
-
-#ifdef CONFIG_ARCH_OMAP24XX
+#ifdef CONFIG_ARCH_OMAP2
if (cpu_is_omap242x()) {
- int rev;
-
gpio_bank_count = 4;
gpio_bank = gpio_bank_242x;
- rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
- printk(KERN_INFO "OMAP242x GPIO hardware version %d.%d\n",
- (rev >> 4) & 0x0f, rev & 0x0f);
}
if (cpu_is_omap243x()) {
- int rev;
-
gpio_bank_count = 5;
gpio_bank = gpio_bank_243x;
- rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
- printk(KERN_INFO "OMAP243x GPIO hardware version %d.%d\n",
- (rev >> 4) & 0x0f, rev & 0x0f);
}
#endif
-#ifdef CONFIG_ARCH_OMAP34XX
+#ifdef CONFIG_ARCH_OMAP3
if (cpu_is_omap34xx()) {
- int rev;
-
gpio_bank_count = OMAP34XX_NR_GPIOS;
gpio_bank = gpio_bank_34xx;
- rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
- printk(KERN_INFO "OMAP34xx GPIO hardware version %d.%d\n",
- (rev >> 4) & 0x0f, rev & 0x0f);
}
#endif
#ifdef CONFIG_ARCH_OMAP4
if (cpu_is_omap44xx()) {
- int rev;
-
gpio_bank_count = OMAP34XX_NR_GPIOS;
gpio_bank = gpio_bank_44xx;
- rev = __raw_readl(gpio_bank[0].base + OMAP4_GPIO_REVISION);
- printk(KERN_INFO "OMAP44xx GPIO hardware version %d.%d\n",
- (rev >> 4) & 0x0f, rev & 0x0f);
}
#endif
for (i = 0; i < gpio_bank_count; i++) {
bank = &gpio_bank[i];
spin_lock_init(&bank->lock);
+
+ /* Static mapping, never released */
+ bank->base = ioremap(bank->pbase, bank_size);
+ if (!bank->base) {
+ printk(KERN_ERR "Could not ioremap gpio bank%i\n", i);
+ continue;
+ }
+
if (bank_is_mpuio(bank))
__raw_writew(0xffff, bank->base + OMAP_MPUIO_GPIO_MASKIT);
if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) {
__raw_writew(0xffff, bank->base + OMAP1610_GPIO_IRQSTATUS1);
__raw_writew(0x0014, bank->base + OMAP1610_GPIO_SYSCONFIG);
}
- if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_730) {
- __raw_writel(0xffffffff, bank->base + OMAP730_GPIO_INT_MASK);
- __raw_writel(0x00000000, bank->base + OMAP730_GPIO_INT_STATUS);
+ if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) {
+ __raw_writel(0xffffffff, bank->base + OMAP7XX_GPIO_INT_MASK);
+ __raw_writel(0x00000000, bank->base + OMAP7XX_GPIO_INT_STATUS);
- gpio_count = 32; /* 730 has 32-bit GPIOs */
+ gpio_count = 32; /* 7xx has 32-bit GPIOs */
}
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
- defined(CONFIG_ARCH_OMAP4)
- if (bank->method == METHOD_GPIO_24XX) {
+#ifdef CONFIG_ARCH_OMAP2PLUS
+ if ((bank->method == METHOD_GPIO_24XX) ||
+ (bank->method == METHOD_GPIO_44XX)) {
static const u32 non_wakeup_gpios[] = {
0xe203ffc0, 0x08700040
};
- if (cpu_is_omap44xx()) {
- __raw_writel(0xffffffff, bank->base +
+
+ if (cpu_is_omap44xx()) {
+ __raw_writel(0xffffffff, bank->base +
OMAP4_GPIO_IRQSTATUSCLR0);
- __raw_writew(0x0015, bank->base +
+ __raw_writew(0x0015, bank->base +
OMAP4_GPIO_SYSCONFIG);
- __raw_writel(0x00000000, bank->base +
+ __raw_writel(0x00000000, bank->base +
OMAP4_GPIO_DEBOUNCENABLE);
- /* Initialize interface clock ungated, module enabled */
- __raw_writel(0, bank->base + OMAP4_GPIO_CTRL);
- } else {
- __raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_IRQENABLE1);
- __raw_writel(0xffffffff, bank->base + OMAP24XX_GPIO_IRQSTATUS1);
- __raw_writew(0x0015, bank->base + OMAP24XX_GPIO_SYSCONFIG);
- __raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_DEBOUNCE_EN);
-
- /* Initialize interface clock ungated, module enabled */
- __raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL);
- }
- if (i < ARRAY_SIZE(non_wakeup_gpios))
+ /*
+ * Initialize interface clock ungated,
+ * module enabled
+ */
+ __raw_writel(0, bank->base + OMAP4_GPIO_CTRL);
+ } else {
+ __raw_writel(0x00000000, bank->base +
+ OMAP24XX_GPIO_IRQENABLE1);
+ __raw_writel(0xffffffff, bank->base +
+ OMAP24XX_GPIO_IRQSTATUS1);
+ __raw_writew(0x0015, bank->base +
+ OMAP24XX_GPIO_SYSCONFIG);
+ __raw_writel(0x00000000, bank->base +
+ OMAP24XX_GPIO_DEBOUNCE_EN);
+
+ /*
+ * Initialize interface clock ungated,
+ * module enabled
+ */
+ __raw_writel(0, bank->base +
+ OMAP24XX_GPIO_CTRL);
+ }
+ if (cpu_is_omap24xx() &&
+ i < ARRAY_SIZE(non_wakeup_gpios))
bank->non_wakeup_gpios = non_wakeup_gpios[i];
gpio_count = 32;
}
#endif
+
+ bank->mod_usage = 0;
/* REVISIT eventually switch from OMAP-specific gpio structs
* over to the generic ones
*/
bank->chip.direction_input = gpio_input;
bank->chip.get = gpio_get;
bank->chip.direction_output = gpio_output;
+ bank->chip.set_debounce = gpio_debounce;
bank->chip.set = gpio_set;
bank->chip.to_irq = gpio_2irq;
if (bank_is_mpuio(bank)) {
if (cpu_is_omap34xx())
omap_writel(1 << 0, 0x48306814);
+ omap_gpio_show_rev();
+
return 0;
}
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
- defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
{
int i;
wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
case METHOD_GPIO_24XX:
wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN;
wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
break;
#endif
#ifdef CONFIG_ARCH_OMAP4
- case METHOD_GPIO_24XX:
+ case METHOD_GPIO_44XX:
wake_status = bank->base + OMAP4_GPIO_IRQWAKEN0;
wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0;
wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0;
wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
case METHOD_GPIO_24XX:
wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
break;
#endif
#ifdef CONFIG_ARCH_OMAP4
- case METHOD_GPIO_24XX:
+ case METHOD_GPIO_44XX:
wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0;
wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
- defined(CONFIG_ARCH_OMAP4)
+#ifdef CONFIG_ARCH_OMAP2PLUS
static int workaround_enabled;
-void omap2_gpio_prepare_for_retention(void)
+void omap2_gpio_prepare_for_idle(int power_state)
{
int i, c = 0;
+ int min = 0;
- /* Remove triggering for all non-wakeup GPIOs. Otherwise spurious
- * IRQs will be generated. See OMAP2420 Errata item 1.101. */
- for (i = 0; i < gpio_bank_count; i++) {
+ if (cpu_is_omap34xx())
+ min = 1;
+
+ for (i = min; i < gpio_bank_count; i++) {
struct gpio_bank *bank = &gpio_bank[i];
u32 l1, l2;
+ if (bank->dbck_enable_mask)
+ clk_disable(bank->dbck);
+
+ if (power_state > PWRDM_POWER_OFF)
+ continue;
+
+ /* If going to OFF, remove triggering for all
+ * non-wakeup GPIOs. Otherwise spurious IRQs will be
+ * generated. See OMAP2420 Errata item 1.101. */
if (!(bank->enabled_non_wakeup_gpios))
continue;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
- bank->saved_datain = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
- l1 = __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
- l2 = __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
-#endif
-#ifdef CONFIG_ARCH_OMAP4
- bank->saved_datain = __raw_readl(bank->base +
- OMAP4_GPIO_DATAIN);
- l1 = __raw_readl(bank->base + OMAP4_GPIO_FALLINGDETECT);
- l2 = __raw_readl(bank->base + OMAP4_GPIO_RISINGDETECT);
-#endif
+
+ if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
+ bank->saved_datain = __raw_readl(bank->base +
+ OMAP24XX_GPIO_DATAIN);
+ l1 = __raw_readl(bank->base +
+ OMAP24XX_GPIO_FALLINGDETECT);
+ l2 = __raw_readl(bank->base +
+ OMAP24XX_GPIO_RISINGDETECT);
+ }
+
+ if (cpu_is_omap44xx()) {
+ bank->saved_datain = __raw_readl(bank->base +
+ OMAP4_GPIO_DATAIN);
+ l1 = __raw_readl(bank->base +
+ OMAP4_GPIO_FALLINGDETECT);
+ l2 = __raw_readl(bank->base +
+ OMAP4_GPIO_RISINGDETECT);
+ }
+
bank->saved_fallingdetect = l1;
bank->saved_risingdetect = l2;
l1 &= ~bank->enabled_non_wakeup_gpios;
l2 &= ~bank->enabled_non_wakeup_gpios;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
- __raw_writel(l1, bank->base + OMAP24XX_GPIO_FALLINGDETECT);
- __raw_writel(l2, bank->base + OMAP24XX_GPIO_RISINGDETECT);
-#endif
-#ifdef CONFIG_ARCH_OMAP4
- __raw_writel(l1, bank->base + OMAP4_GPIO_FALLINGDETECT);
- __raw_writel(l2, bank->base + OMAP4_GPIO_RISINGDETECT);
-#endif
+
+ if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
+ __raw_writel(l1, bank->base +
+ OMAP24XX_GPIO_FALLINGDETECT);
+ __raw_writel(l2, bank->base +
+ OMAP24XX_GPIO_RISINGDETECT);
+ }
+
+ if (cpu_is_omap44xx()) {
+ __raw_writel(l1, bank->base + OMAP4_GPIO_FALLINGDETECT);
+ __raw_writel(l2, bank->base + OMAP4_GPIO_RISINGDETECT);
+ }
+
c++;
}
if (!c) {
workaround_enabled = 1;
}
-void omap2_gpio_resume_after_retention(void)
+void omap2_gpio_resume_after_idle(void)
{
int i;
+ int min = 0;
- if (!workaround_enabled)
- return;
- for (i = 0; i < gpio_bank_count; i++) {
+ if (cpu_is_omap34xx())
+ min = 1;
+ for (i = min; i < gpio_bank_count; i++) {
struct gpio_bank *bank = &gpio_bank[i];
u32 l, gen, gen0, gen1;
+ if (bank->dbck_enable_mask)
+ clk_enable(bank->dbck);
+
+ if (!workaround_enabled)
+ continue;
+
if (!(bank->enabled_non_wakeup_gpios))
continue;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
- __raw_writel(bank->saved_fallingdetect,
+
+ if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
+ __raw_writel(bank->saved_fallingdetect,
bank->base + OMAP24XX_GPIO_FALLINGDETECT);
- __raw_writel(bank->saved_risingdetect,
+ __raw_writel(bank->saved_risingdetect,
bank->base + OMAP24XX_GPIO_RISINGDETECT);
- l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
-#endif
-#ifdef CONFIG_ARCH_OMAP4
- __raw_writel(bank->saved_fallingdetect,
+ l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
+ }
+
+ if (cpu_is_omap44xx()) {
+ __raw_writel(bank->saved_fallingdetect,
bank->base + OMAP4_GPIO_FALLINGDETECT);
- __raw_writel(bank->saved_risingdetect,
+ __raw_writel(bank->saved_risingdetect,
bank->base + OMAP4_GPIO_RISINGDETECT);
- l = __raw_readl(bank->base + OMAP4_GPIO_DATAIN);
-#endif
+ l = __raw_readl(bank->base + OMAP4_GPIO_DATAIN);
+ }
+
/* Check if any of the non-wakeup interrupt GPIOs have changed
* state. If so, generate an IRQ by software. This is
* horribly racy, but it's the best we can do to work around
* this silicon bug. */
l ^= bank->saved_datain;
- l &= bank->non_wakeup_gpios;
+ l &= bank->enabled_non_wakeup_gpios;
/*
* No need to generate IRQs for the rising edge for gpio IRQs
if (gen) {
u32 old0, old1;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
- old0 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
- old1 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
- __raw_writel(old0 | gen, bank->base +
+
+ if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
+ old0 = __raw_readl(bank->base +
OMAP24XX_GPIO_LEVELDETECT0);
- __raw_writel(old1 | gen, bank->base +
+ old1 = __raw_readl(bank->base +
OMAP24XX_GPIO_LEVELDETECT1);
- __raw_writel(old0, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
- __raw_writel(old1, bank->base + OMAP24XX_GPIO_LEVELDETECT1);
-#endif
-#ifdef CONFIG_ARCH_OMAP4
- old0 = __raw_readl(bank->base +
+ __raw_writel(old0 | gen, bank->base +
+ OMAP24XX_GPIO_LEVELDETECT0);
+ __raw_writel(old1 | gen, bank->base +
+ OMAP24XX_GPIO_LEVELDETECT1);
+ __raw_writel(old0, bank->base +
+ OMAP24XX_GPIO_LEVELDETECT0);
+ __raw_writel(old1, bank->base +
+ OMAP24XX_GPIO_LEVELDETECT1);
+ }
+
+ if (cpu_is_omap44xx()) {
+ old0 = __raw_readl(bank->base +
OMAP4_GPIO_LEVELDETECT0);
- old1 = __raw_readl(bank->base +
+ old1 = __raw_readl(bank->base +
OMAP4_GPIO_LEVELDETECT1);
- __raw_writel(old0 | l, bank->base +
+ __raw_writel(old0 | l, bank->base +
OMAP4_GPIO_LEVELDETECT0);
- __raw_writel(old1 | l, bank->base +
+ __raw_writel(old1 | l, bank->base +
OMAP4_GPIO_LEVELDETECT1);
- __raw_writel(old0, bank->base +
+ __raw_writel(old0, bank->base +
OMAP4_GPIO_LEVELDETECT0);
- __raw_writel(old1, bank->base +
+ __raw_writel(old1, bank->base +
OMAP4_GPIO_LEVELDETECT1);
-#endif
+ }
}
}
#endif
+#ifdef CONFIG_ARCH_OMAP3
+/* save the registers of bank 2-6 */
+void omap_gpio_save_context(void)
+{
+ int i;
+
+ /* saving banks from 2-6 only since GPIO1 is in WKUP */
+ for (i = 1; i < gpio_bank_count; i++) {
+ struct gpio_bank *bank = &gpio_bank[i];
+ gpio_context[i].sysconfig =
+ __raw_readl(bank->base + OMAP24XX_GPIO_SYSCONFIG);
+ gpio_context[i].irqenable1 =
+ __raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE1);
+ gpio_context[i].irqenable2 =
+ __raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE2);
+ gpio_context[i].wake_en =
+ __raw_readl(bank->base + OMAP24XX_GPIO_WAKE_EN);
+ gpio_context[i].ctrl =
+ __raw_readl(bank->base + OMAP24XX_GPIO_CTRL);
+ gpio_context[i].oe =
+ __raw_readl(bank->base + OMAP24XX_GPIO_OE);
+ gpio_context[i].leveldetect0 =
+ __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
+ gpio_context[i].leveldetect1 =
+ __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+ gpio_context[i].risingdetect =
+ __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
+ gpio_context[i].fallingdetect =
+ __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
+ gpio_context[i].dataout =
+ __raw_readl(bank->base + OMAP24XX_GPIO_DATAOUT);
+ }
+}
+
+/* restore the required registers of bank 2-6 */
+void omap_gpio_restore_context(void)
+{
+ int i;
+
+ for (i = 1; i < gpio_bank_count; i++) {
+ struct gpio_bank *bank = &gpio_bank[i];
+ __raw_writel(gpio_context[i].sysconfig,
+ bank->base + OMAP24XX_GPIO_SYSCONFIG);
+ __raw_writel(gpio_context[i].irqenable1,
+ bank->base + OMAP24XX_GPIO_IRQENABLE1);
+ __raw_writel(gpio_context[i].irqenable2,
+ bank->base + OMAP24XX_GPIO_IRQENABLE2);
+ __raw_writel(gpio_context[i].wake_en,
+ bank->base + OMAP24XX_GPIO_WAKE_EN);
+ __raw_writel(gpio_context[i].ctrl,
+ bank->base + OMAP24XX_GPIO_CTRL);
+ __raw_writel(gpio_context[i].oe,
+ bank->base + OMAP24XX_GPIO_OE);
+ __raw_writel(gpio_context[i].leveldetect0,
+ bank->base + OMAP24XX_GPIO_LEVELDETECT0);
+ __raw_writel(gpio_context[i].leveldetect1,
+ bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+ __raw_writel(gpio_context[i].risingdetect,
+ bank->base + OMAP24XX_GPIO_RISINGDETECT);
+ __raw_writel(gpio_context[i].fallingdetect,
+ bank->base + OMAP24XX_GPIO_FALLINGDETECT);
+ __raw_writel(gpio_context[i].dataout,
+ bank->base + OMAP24XX_GPIO_DATAOUT);
+ }
+}
+#endif
+
/*
* This may get called early from board specific init
* for boards that have interrupts routed via FPGA.
mpuio_init();
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
- defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
if (ret == 0) {
ret = sysdev_class_register(&omap_gpio_sysclass);
}
arch_initcall(omap_gpio_sysinit);
-
-
-#ifdef CONFIG_DEBUG_FS
-
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-
-static int dbg_gpio_show(struct seq_file *s, void *unused)
-{
- unsigned i, j, gpio;
-
- for (i = 0, gpio = 0; i < gpio_bank_count; i++) {
- struct gpio_bank *bank = gpio_bank + i;
- unsigned bankwidth = 16;
- u32 mask = 1;
-
- if (bank_is_mpuio(bank))
- gpio = OMAP_MPUIO(0);
- else if (cpu_class_is_omap2() || cpu_is_omap730() ||
- cpu_is_omap850())
- bankwidth = 32;
-
- for (j = 0; j < bankwidth; j++, gpio++, mask <<= 1) {
- unsigned irq, value, is_in, irqstat;
- const char *label;
-
- label = gpiochip_is_requested(&bank->chip, j);
- if (!label)
- continue;
-
- irq = bank->virtual_irq_start + j;
- value = gpio_get_value(gpio);
- is_in = gpio_is_input(bank, mask);
-
- if (bank_is_mpuio(bank))
- seq_printf(s, "MPUIO %2d ", j);
- else
- seq_printf(s, "GPIO %3d ", gpio);
- seq_printf(s, "(%-20.20s): %s %s",
- label,
- is_in ? "in " : "out",
- value ? "hi" : "lo");
-
-/* FIXME for at least omap2, show pullup/pulldown state */
-
- irqstat = irq_desc[irq].status;
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
- defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
- if (is_in && ((bank->suspend_wakeup & mask)
- || irqstat & IRQ_TYPE_SENSE_MASK)) {
- char *trigger = NULL;
-
- switch (irqstat & IRQ_TYPE_SENSE_MASK) {
- case IRQ_TYPE_EDGE_FALLING:
- trigger = "falling";
- break;
- case IRQ_TYPE_EDGE_RISING:
- trigger = "rising";
- break;
- case IRQ_TYPE_EDGE_BOTH:
- trigger = "bothedge";
- break;
- case IRQ_TYPE_LEVEL_LOW:
- trigger = "low";
- break;
- case IRQ_TYPE_LEVEL_HIGH:
- trigger = "high";
- break;
- case IRQ_TYPE_NONE:
- trigger = "(?)";
- break;
- }
- seq_printf(s, ", irq-%d %-8s%s",
- irq, trigger,
- (bank->suspend_wakeup & mask)
- ? " wakeup" : "");
- }
-#endif
- seq_printf(s, "\n");
- }
-
- if (bank_is_mpuio(bank)) {
- seq_printf(s, "\n");
- gpio = 0;
- }
- }
- return 0;
-}
-
-static int dbg_gpio_open(struct inode *inode, struct file *file)
-{
- return single_open(file, dbg_gpio_show, &inode->i_private);
-}
-
-static const struct file_operations debug_fops = {
- .open = dbg_gpio_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static int __init omap_gpio_debuginit(void)
-{
- (void) debugfs_create_file("omap_gpio", S_IRUGO,
- NULL, NULL, &debug_fops);
- return 0;
-}
-late_initcall(omap_gpio_debuginit);
-#endif
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff