#include <linux/mman.h>
#include <linux/nodemask.h>
+#include <asm/cputype.h>
#include <asm/mach-types.h>
#include <asm/setup.h>
#include <asm/sizes.h>
DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
-extern void _stext, _etext, __data_start, _end;
-extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
-
/*
* empty_zero_page is a special page that is used for
* zero-initialized data and COW.
#endif
#define PROT_PTE_DEVICE L_PTE_PRESENT|L_PTE_YOUNG|L_PTE_DIRTY|L_PTE_WRITE
-#define PROT_SECT_DEVICE PMD_TYPE_SECT|PMD_SECT_XN|PMD_SECT_AP_WRITE
+#define PROT_SECT_DEVICE PMD_TYPE_SECT|PMD_SECT_AP_WRITE
static struct mem_type mem_types[] = {
[MT_DEVICE] = { /* Strongly ordered / ARMv6 shared device */
.prot_pte = PROT_PTE_DEVICE | L_PTE_MT_DEV_SHARED |
L_PTE_SHARED,
.prot_l1 = PMD_TYPE_TABLE,
- .prot_sect = PROT_SECT_DEVICE | PMD_SECT_UNCACHED,
+ .prot_sect = PROT_SECT_DEVICE | PMD_SECT_S,
.domain = DOMAIN_IO,
},
[MT_DEVICE_NONSHARED] = { /* ARMv6 non-shared device */
.prot_pte = PROT_PTE_DEVICE | L_PTE_MT_DEV_NONSHARED,
- .prot_pte_ext = PTE_EXT_TEX(2),
.prot_l1 = PMD_TYPE_TABLE,
- .prot_sect = PROT_SECT_DEVICE | PMD_SECT_TEX(2),
+ .prot_sect = PROT_SECT_DEVICE,
.domain = DOMAIN_IO,
},
[MT_DEVICE_CACHED] = { /* ioremap_cached */
.prot_sect = PROT_SECT_DEVICE | PMD_SECT_WB,
.domain = DOMAIN_IO,
},
- [MT_DEVICE_IXP2000] = { /* IXP2400 requires XCB=101 for on-chip I/O */
- .prot_pte = PROT_PTE_DEVICE | L_PTE_MT_DEV_IXP2000,
+ [MT_DEVICE_WC] = { /* ioremap_wc */
+ .prot_pte = PROT_PTE_DEVICE | L_PTE_MT_DEV_WC,
.prot_l1 = PMD_TYPE_TABLE,
- .prot_sect = PROT_SECT_DEVICE | PMD_SECT_BUFFERABLE |
- PMD_SECT_TEX(1),
+ .prot_sect = PROT_SECT_DEVICE,
.domain = DOMAIN_IO,
},
- [MT_DEVICE_WC] = { /* ioremap_wc */
- .prot_pte = PROT_PTE_DEVICE | L_PTE_MT_DEV_WC,
+ [MT_UNCACHED] = {
+ .prot_pte = PROT_PTE_DEVICE,
.prot_l1 = PMD_TYPE_TABLE,
- .prot_sect = PROT_SECT_DEVICE | PMD_SECT_BUFFERABLE,
+ .prot_sect = PMD_TYPE_SECT | PMD_SECT_XN,
.domain = DOMAIN_IO,
},
[MT_CACHECLEAN] = {
#endif
/*
- * On non-Xscale3 ARMv5-and-older systems, use CB=01
- * (Uncached/Buffered) for ioremap_wc() mappings. On XScale3
- * and ARMv6+, use TEXCB=00100 mappings (Inner/Outer Uncacheable
- * in xsc3 parlance, Uncached Normal in ARMv6 parlance).
+ * Strip out features not present on earlier architectures.
+ * Pre-ARMv5 CPUs don't have TEX bits. Pre-ARMv6 CPUs or those
+ * without extended page tables don't have the 'Shared' bit.
*/
- if (cpu_is_xsc3() || cpu_arch >= CPU_ARCH_ARMv6) {
- mem_types[MT_DEVICE_WC].prot_pte_ext |= PTE_EXT_TEX(1);
- mem_types[MT_DEVICE_WC].prot_pte &= ~L_PTE_BUFFERABLE;
- mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_TEX(1);
- mem_types[MT_DEVICE_WC].prot_sect &= ~PMD_SECT_BUFFERABLE;
- }
+ if (cpu_arch < CPU_ARCH_ARMv5)
+ for (i = 0; i < ARRAY_SIZE(mem_types); i++)
+ mem_types[i].prot_sect &= ~PMD_SECT_TEX(7);
+ if ((cpu_arch < CPU_ARCH_ARMv6 || !(cr & CR_XP)) && !cpu_is_xsc3())
+ for (i = 0; i < ARRAY_SIZE(mem_types); i++)
+ mem_types[i].prot_sect &= ~PMD_SECT_S;
/*
- * ARMv5 and lower, bit 4 must be set for page tables.
- * (was: cache "update-able on write" bit on ARM610)
- * However, Xscale cores require this bit to be cleared.
+ * ARMv5 and lower, bit 4 must be set for page tables (was: cache
+ * "update-able on write" bit on ARM610). However, Xscale and
+ * Xscale3 require this bit to be cleared.
*/
- if (cpu_is_xscale()) {
+ if (cpu_is_xscale() || cpu_is_xsc3()) {
for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
mem_types[i].prot_sect &= ~PMD_BIT4;
mem_types[i].prot_l1 &= ~PMD_BIT4;
}
}
+ /*
+ * Mark the device areas according to the CPU/architecture.
+ */
+ if (cpu_is_xsc3() || (cpu_arch >= CPU_ARCH_ARMv6 && (cr & CR_XP))) {
+ if (!cpu_is_xsc3()) {
+ /*
+ * Mark device regions on ARMv6+ as execute-never
+ * to prevent speculative instruction fetches.
+ */
+ mem_types[MT_DEVICE].prot_sect |= PMD_SECT_XN;
+ mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_XN;
+ mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_XN;
+ mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_XN;
+ }
+ if (cpu_arch >= CPU_ARCH_ARMv7 && (cr & CR_TRE)) {
+ /*
+ * For ARMv7 with TEX remapping,
+ * - shared device is SXCB=1100
+ * - nonshared device is SXCB=0100
+ * - write combine device mem is SXCB=0001
+ * (Uncached Normal memory)
+ */
+ mem_types[MT_DEVICE].prot_sect |= PMD_SECT_TEX(1);
+ mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_TEX(1);
+ mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_BUFFERABLE;
+ } else if (cpu_is_xsc3()) {
+ /*
+ * For Xscale3,
+ * - shared device is TEXCB=00101
+ * - nonshared device is TEXCB=01000
+ * - write combine device mem is TEXCB=00100
+ * (Inner/Outer Uncacheable in xsc3 parlance)
+ */
+ mem_types[MT_DEVICE].prot_sect |= PMD_SECT_TEX(1) | PMD_SECT_BUFFERED;
+ mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_TEX(2);
+ mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_TEX(1);
+ } else {
+ /*
+ * For ARMv6 and ARMv7 without TEX remapping,
+ * - shared device is TEXCB=00001
+ * - nonshared device is TEXCB=01000
+ * - write combine device mem is TEXCB=00100
+ * (Uncached Normal in ARMv6 parlance).
+ */
+ mem_types[MT_DEVICE].prot_sect |= PMD_SECT_BUFFERED;
+ mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_TEX(2);
+ mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_TEX(1);
+ }
+ } else {
+ /*
+ * On others, write combining is "Uncached/Buffered"
+ */
+ mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_BUFFERABLE;
+ }
+
+ /*
+ * Now deal with the memory-type mappings
+ */
cp = &cache_policies[cachepolicy];
vecs_pgprot = kern_pgprot = user_pgprot = cp->pte;
* Enable CPU-specific coherency if supported.
* (Only available on XSC3 at the moment.)
*/
- if (arch_is_coherent()) {
- if (cpu_is_xsc3()) {
- mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
- mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED;
- }
- }
+ if (arch_is_coherent() && cpu_is_xsc3())
+ mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
/*
* ARMv6 and above have extended page tables.
mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
- /*
- * Mark the device area as "shared device"
- */
- mem_types[MT_DEVICE].prot_pte |= L_PTE_BUFFERABLE;
- mem_types[MT_DEVICE].prot_sect |= PMD_SECT_BUFFERED;
-
#ifdef CONFIG_SMP
/*
* Mark memory with the "shared" attribute for SMP systems
mem_types[MT_LOW_VECTORS].prot_pte |= vecs_pgprot;
mem_types[MT_HIGH_VECTORS].prot_pte |= vecs_pgprot;
- if (cpu_arch < CPU_ARCH_ARMv5)
- mem_types[MT_MINICLEAN].prot_sect &= ~PMD_SECT_TEX(1);
-
pgprot_user = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | user_pgprot);
pgprot_kernel = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG |
L_PTE_DIRTY | L_PTE_WRITE |
pte = pte_offset_kernel(pmd, addr);
do {
- set_pte_ext(pte, pfn_pte(pfn, __pgprot(type->prot_pte)),
- type->prot_pte_ext);
+ set_pte_ext(pte, pfn_pte(pfn, __pgprot(type->prot_pte)), 0);
pfn++;
} while (pte++, addr += PAGE_SIZE, addr != end);
}
create_mapping(io_desc + i);
}
+static unsigned long __initdata vmalloc_reserve = SZ_128M;
+
+/*
+ * vmalloc=size forces the vmalloc area to be exactly 'size'
+ * bytes. This can be used to increase (or decrease) the vmalloc
+ * area - the default is 128m.
+ */
+static void __init early_vmalloc(char **arg)
+{
+ vmalloc_reserve = memparse(*arg, arg);
+
+ if (vmalloc_reserve < SZ_16M) {
+ vmalloc_reserve = SZ_16M;
+ printk(KERN_WARNING
+ "vmalloc area too small, limiting to %luMB\n",
+ vmalloc_reserve >> 20);
+ }
+}
+__early_param("vmalloc=", early_vmalloc);
+
+#define VMALLOC_MIN (void *)(VMALLOC_END - vmalloc_reserve)
+
static int __init check_membank_valid(struct membank *mb)
{
/*
- * Check whether this memory region has non-zero size.
+ * Check whether this memory region has non-zero size or
+ * invalid node number.
*/
- if (mb->size == 0)
+ if (mb->size == 0 || mb->node >= MAX_NUMNODES)
return 0;
/*
static void __init sanity_check_meminfo(struct meminfo *mi)
{
- int i;
- int j;
+ int i, j;
for (i = 0, j = 0; i < mi->nr_banks; i++) {
if (check_membank_valid(&mi->bank[i]))
/*
* Clear out all the mappings below the kernel image.
*/
- for (addr = 0; addr < MODULE_START; addr += PGDIR_SIZE)
+ for (addr = 0; addr < MODULES_VADDR; addr += PGDIR_SIZE)
pmd_clear(pmd_off_k(addr));
#ifdef CONFIG_XIP_KERNEL
*/
#ifdef CONFIG_XIP_KERNEL
map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & SECTION_MASK);
- map.virtual = MODULE_START;
+ map.virtual = MODULES_VADDR;
map.length = ((unsigned long)&_etext - map.virtual + ~SECTION_MASK) & SECTION_MASK;
map.type = MT_ROM;
create_mapping(&map);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff