select CPU_CP15_MMU
select CPU_COPY_V3 if MMU
select CPU_TLB_V3 if MMU
+ select CPU_PABRT_NOIFAR
help
The ARM610 is the successor to the ARM3 processor
and was produced by VLSI Technology Inc.
# ARM7TDMI
config CPU_ARM7TDMI
bool "Support ARM7TDMI processor"
+ depends on !MMU
select CPU_32v4T
select CPU_ABRT_LV4T
+ select CPU_PABRT_NOIFAR
select CPU_CACHE_V4
help
A 32-bit RISC microprocessor based on the ARM7 processor core
select CPU_CP15_MMU
select CPU_COPY_V3 if MMU
select CPU_TLB_V3 if MMU
+ select CPU_PABRT_NOIFAR
help
A 32-bit RISC microprocessor based on the ARM7 processor core
designed by Advanced RISC Machines Ltd. The ARM710 is the
default y if ARCH_CLPS711X || ARCH_L7200 || ARCH_CDB89712 || ARCH_H720X
select CPU_32v4T
select CPU_ABRT_LV4T
+ select CPU_PABRT_NOIFAR
select CPU_CACHE_V4
select CPU_CACHE_VIVT
select CPU_CP15_MMU
# ARM740T
config CPU_ARM740T
bool "Support ARM740T processor" if ARCH_INTEGRATOR
+ depends on !MMU
select CPU_32v4T
select CPU_ABRT_LV4T
+ select CPU_PABRT_NOIFAR
select CPU_CACHE_V3 # although the core is v4t
select CPU_CP15_MPU
help
# ARM9TDMI
config CPU_ARM9TDMI
bool "Support ARM9TDMI processor"
+ depends on !MMU
select CPU_32v4T
- select CPU_ABRT_EV4T
+ select CPU_ABRT_NOMMU
+ select CPU_PABRT_NOIFAR
select CPU_CACHE_V4
help
A 32-bit RISC microprocessor based on the ARM9 processor core
default y if CPU_S3C2410 || CPU_S3C2440 || CPU_S3C2442 || ARCH_AT91RM9200
select CPU_32v4T
select CPU_ABRT_EV4T
+ select CPU_PABRT_NOIFAR
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
select CPU_CP15_MMU
# ARM922T
config CPU_ARM922T
bool "Support ARM922T processor" if ARCH_INTEGRATOR
- depends on ARCH_LH7A40X || ARCH_INTEGRATOR
- default y if ARCH_LH7A40X
+ depends on ARCH_LH7A40X || ARCH_INTEGRATOR || ARCH_KS8695
+ default y if ARCH_LH7A40X || ARCH_KS8695
select CPU_32v4T
select CPU_ABRT_EV4T
+ select CPU_PABRT_NOIFAR
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
select CPU_CP15_MMU
help
The ARM922T is a version of the ARM920T, but with smaller
instruction and data caches. It is used in Altera's
- Excalibur XA device family.
+ Excalibur XA device family and Micrel's KS8695 Centaur.
Say Y if you want support for the ARM922T processor.
Otherwise, say N.
default y if ARCH_OMAP15XX
select CPU_32v4T
select CPU_ABRT_EV4T
+ select CPU_PABRT_NOIFAR
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
select CPU_CP15_MMU
# ARM926T
config CPU_ARM926T
bool "Support ARM926T processor"
- depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261
- default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261
+ depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || ARCH_NS9XXX || ARCH_DAVINCI
+ default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || ARCH_NS9XXX || ARCH_DAVINCI
select CPU_32v5
select CPU_ABRT_EV5TJ
+ select CPU_PABRT_NOIFAR
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU
# ARM940T
config CPU_ARM940T
bool "Support ARM940T processor" if ARCH_INTEGRATOR
+ depends on !MMU
select CPU_32v4T
- select CPU_ABRT_EV4T
+ select CPU_ABRT_NOMMU
+ select CPU_PABRT_NOIFAR
select CPU_CACHE_VIVT
select CPU_CP15_MPU
help
ARM940T is a member of the ARM9TDMI family of general-
- purpose microprocessors with MPU and seperate 4KB
+ purpose microprocessors with MPU and separate 4KB
instruction and 4KB data cases, each with a 4-word line
length.
Say Y if you want support for the ARM940T processor.
Otherwise, say N.
+# ARM946E-S
+config CPU_ARM946E
+ bool "Support ARM946E-S processor" if ARCH_INTEGRATOR
+ depends on !MMU
+ select CPU_32v5
+ select CPU_ABRT_NOMMU
+ select CPU_PABRT_NOIFAR
+ select CPU_CACHE_VIVT
+ select CPU_CP15_MPU
+ help
+ ARM946E-S is a member of the ARM9E-S family of high-
+ performance, 32-bit system-on-chip processor solutions.
+ The TCM and ARMv5TE 32-bit instruction set is supported.
+
+ Say Y if you want support for the ARM946E-S processor.
+ Otherwise, say N.
+
# ARM1020 - needs validating
config CPU_ARM1020
bool "Support ARM1020T (rev 0) processor"
depends on ARCH_INTEGRATOR
select CPU_32v5
select CPU_ABRT_EV4T
+ select CPU_PABRT_NOIFAR
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
select CPU_CP15_MMU
depends on ARCH_INTEGRATOR
select CPU_32v5
select CPU_ABRT_EV4T
+ select CPU_PABRT_NOIFAR
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
select CPU_CP15_MMU
depends on ARCH_INTEGRATOR
select CPU_32v5
select CPU_ABRT_EV4T
+ select CPU_PABRT_NOIFAR
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU # can probably do better
depends on ARCH_INTEGRATOR
select CPU_32v5
select CPU_ABRT_EV5T # But need Jazelle, but EV5TJ ignores bit 10
+ select CPU_PABRT_NOIFAR
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU # can probably do better
select CPU_32v3 if ARCH_RPC
select CPU_32v4 if !ARCH_RPC
select CPU_ABRT_EV4
+ select CPU_PABRT_NOIFAR
select CPU_CACHE_V4WB
select CPU_CACHE_VIVT
select CPU_CP15_MMU
default y
select CPU_32v4
select CPU_ABRT_EV4
+ select CPU_PABRT_NOIFAR
select CPU_CACHE_V4WB
select CPU_CACHE_VIVT
select CPU_CP15_MMU
# XScale
config CPU_XSCALE
bool
- depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_PXA || ARCH_IXP4XX || ARCH_IXP2000
+ depends on ARCH_IOP32X || ARCH_IOP33X || PXA25x || PXA27x || ARCH_IXP4XX || ARCH_IXP2000
default y
select CPU_32v5
select CPU_ABRT_EV5T
+ select CPU_PABRT_NOIFAR
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_TLB_V4WBI if MMU
# XScale Core Version 3
config CPU_XSC3
bool
- depends on ARCH_IXP23XX
+ depends on ARCH_IXP23XX || ARCH_IOP13XX || PXA3xx
default y
select CPU_32v5
select CPU_ABRT_EV5T
+ select CPU_PABRT_NOIFAR
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_TLB_V4WBI if MMU
select IO_36
+# Feroceon
+config CPU_FEROCEON
+ bool
+ depends on ARCH_ORION5X || ARCH_LOKI || ARCH_KIRKWOOD || ARCH_MV78XX0
+ default y
+ select CPU_32v5
+ select CPU_ABRT_EV5T
+ select CPU_PABRT_NOIFAR
+ select CPU_CACHE_VIVT
+ select CPU_CP15_MMU
+ select CPU_COPY_FEROCEON if MMU
+ select CPU_TLB_FEROCEON if MMU
+
+config CPU_FEROCEON_OLD_ID
+ bool "Accept early Feroceon cores with an ARM926 ID"
+ depends on CPU_FEROCEON && !CPU_ARM926T
+ default y
+ help
+ This enables the usage of some old Feroceon cores
+ for which the CPU ID is equal to the ARM926 ID.
+ Relevant for Feroceon-1850 and early Feroceon-2850.
+
# ARMv6
config CPU_V6
bool "Support ARM V6 processor"
- depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2
+ depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3 || ARCH_MSM7X00A || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176
+ default y if ARCH_MX3
+ default y if ARCH_MSM7X00A
select CPU_32v6
select CPU_ABRT_EV6
+ select CPU_PABRT_NOIFAR
select CPU_CACHE_V6
select CPU_CACHE_VIPT
select CPU_CP15_MMU
+ select CPU_HAS_ASID if MMU
select CPU_COPY_V6 if MMU
select CPU_TLB_V6 if MMU
config CPU_32v6K
bool "Support ARM V6K processor extensions" if !SMP
depends on CPU_V6
- default y if SMP
+ default y if SMP && !ARCH_MX3
help
Say Y here if your ARMv6 processor supports the 'K' extension.
This enables the kernel to use some instructions not present
enabled will not boot on processors with do not support these
instructions.
+# ARMv7
+config CPU_V7
+ bool "Support ARM V7 processor"
+ depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB
+ select CPU_32v6K
+ select CPU_32v7
+ select CPU_ABRT_EV7
+ select CPU_PABRT_IFAR
+ select CPU_CACHE_V7
+ select CPU_CACHE_VIPT
+ select CPU_CP15_MMU
+ select CPU_HAS_ASID if MMU
+ select CPU_COPY_V6 if MMU
+ select CPU_TLB_V7 if MMU
+
# Figure out what processor architecture version we should be using.
# This defines the compiler instruction set which depends on the machine type.
config CPU_32v3
config CPU_32v6
bool
+ select TLS_REG_EMUL if !CPU_32v6K && !MMU
+
+config CPU_32v7
+ bool
# The abort model
+config CPU_ABRT_NOMMU
+ bool
+
config CPU_ABRT_EV4
bool
config CPU_ABRT_EV6
bool
+config CPU_ABRT_EV7
+ bool
+
+config CPU_PABRT_IFAR
+ bool
+
+config CPU_PABRT_NOIFAR
+ bool
+
# The cache model
config CPU_CACHE_V3
bool
config CPU_CACHE_V6
bool
+config CPU_CACHE_V7
+ bool
+
config CPU_CACHE_VIVT
bool
config CPU_COPY_V4WB
bool
+config CPU_COPY_FEROCEON
+ bool
+
config CPU_COPY_V6
bool
ARM Architecture Version 4 TLB with writeback cache and invalidate
instruction cache entry.
+config CPU_TLB_FEROCEON
+ bool
+ help
+ Feroceon TLB (v4wbi with non-outer-cachable page table walks).
+
config CPU_TLB_V6
bool
+config CPU_TLB_V7
+ bool
+
endif
+config CPU_HAS_ASID
+ bool
+ help
+ This indicates whether the CPU has the ASID register; used to
+ tag TLB and possibly cache entries.
+
config CPU_CP15
bool
help
config ARM_THUMB
bool "Support Thumb user binaries"
- depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_V6
+ depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_V6 || CPU_V7 || CPU_FEROCEON
default y
help
Say Y if you want to include kernel support for running user space
If you don't know what this all is, saying Y is a safe choice.
+config ARM_THUMBEE
+ bool "Enable ThumbEE CPU extension"
+ depends on CPU_V7
+ help
+ Say Y here if you have a CPU with the ThumbEE extension and code to
+ make use of it. Say N for code that can run on CPUs without ThumbEE.
+
config CPU_BIG_ENDIAN
bool "Build big-endian kernel"
depends on ARCH_SUPPORTS_BIG_ENDIAN
port must properly enable any big-endian related features
of your chipset/board/processor.
+config CPU_HIGH_VECTOR
+ depends on !MMU && CPU_CP15 && !CPU_ARM740T
+ bool "Select the High exception vector"
+ default n
+ help
+ Say Y here to select high exception vector(0xFFFF0000~).
+ The exception vector can be vary depending on the platform
+ design in nommu mode. If your platform needs to select
+ high exception vector, say Y.
+ Otherwise or if you are unsure, say N, and the low exception
+ vector (0x00000000~) will be used.
+
config CPU_ICACHE_DISABLE
bool "Disable I-Cache (I-bit)"
depends on CPU_CP15 && !(CPU_ARM610 || CPU_ARM710 || CPU_ARM720T || CPU_ARM740T || CPU_XSCALE || CPU_XSC3)
Say Y here to disable the processor data cache. Unless
you have a reason not to or are unsure, say N.
+config CPU_DCACHE_SIZE
+ hex
+ depends on CPU_ARM740T || CPU_ARM946E
+ default 0x00001000 if CPU_ARM740T
+ default 0x00002000 # default size for ARM946E-S
+ help
+ Some cores are synthesizable to have various sized cache. For
+ ARM946E-S case, it can vary from 0KB to 1MB.
+ To support such cache operations, it is efficient to know the size
+ before compile time.
+ If your SoC is configured to have a different size, define the value
+ here with proper conditions.
+
config CPU_DCACHE_WRITETHROUGH
bool "Force write through D-cache"
- depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM1020 || CPU_V6) && !CPU_DCACHE_DISABLE
+ depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020) && !CPU_DCACHE_DISABLE
default y if CPU_ARM925T
help
Say Y here to use the data cache in writethrough mode. Unless you
config CPU_CACHE_ROUND_ROBIN
bool "Round robin I and D cache replacement algorithm"
- depends on (CPU_ARM926T || CPU_ARM1020) && (!CPU_ICACHE_DISABLE || !CPU_DCACHE_DISABLE)
+ depends on (CPU_ARM926T || CPU_ARM946E || CPU_ARM1020) && (!CPU_ICACHE_DISABLE || !CPU_DCACHE_DISABLE)
help
Say Y here to use the predictable round-robin cache replacement
policy. Unless you specifically require this or are unsure, say N.
config CPU_BPREDICT_DISABLE
bool "Disable branch prediction"
- depends on CPU_ARM1020 || CPU_V6
+ depends on CPU_ARM1020 || CPU_V6 || CPU_XSC3 || CPU_V7
help
Say Y here to disable branch prediction. If unsure, say N.
Forget about fast user space cmpxchg support.
It is just not possible.
+config OUTER_CACHE
+ bool
+ default n
+
+config CACHE_FEROCEON_L2
+ bool "Enable the Feroceon L2 cache controller"
+ depends on ARCH_KIRKWOOD || ARCH_MV78XX0
+ default y
+ select OUTER_CACHE
+ help
+ This option enables the Feroceon L2 cache controller.
+
+config CACHE_L2X0
+ bool "Enable the L2x0 outer cache controller"
+ depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176
+ default y
+ select OUTER_CACHE
+ help
+ This option enables the L2x0 PrimeCell.