* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
- * Modifications:
- * 16-May-2003 BJD Created initial version
- * 16-Aug-2003 BJD Fixed header files and copyright, added URL
- * 05-Sep-2003 BJD Moved to v2.6 kernel
- * 06-Jan-2003 BJD Updates for <arch/map.h>
- * 18-Jan-2003 BJD Added serial port configuration
- * 17-Feb-2003 BJD Copied to mach-ipaq.c
- * 21-Aug-2004 BJD Added struct s3c2410_board
- * 04-Sep-2004 BJD Changed uart init, renamed ipaq_ -> h1940_
- * 18-Oct-2004 BJD Updated new board structure name
- * 04-Nov-2004 BJD Change for new serial clock
- * 04-Jan-2005 BJD Updated uart init call
- * 10-Jan-2005 BJD Removed include of s3c2410.h
- * 14-Jan-2005 BJD Added clock init
- * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
*/
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/hardware.h>
-#include <asm/hardware/iomd.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-//#include <asm/debug-ll.h>
#include <asm/arch/regs-serial.h>
#include <asm/arch/regs-lcd.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-clock.h>
+#include <asm/arch/h1940.h>
+#include <asm/arch/h1940-latch.h>
#include <asm/arch/fb.h>
+#include <asm/arch/udc.h>
-#include <linux/serial_core.h>
-
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
static struct map_desc h1940_iodesc[] __initdata = {
- /* nothing here yet */
+ [0] = {
+ .virtual = (unsigned long)H1940_LATCH,
+ .pfn = __phys_to_pfn(H1940_PA_LATCH),
+ .length = SZ_16K,
+ .type = MT_DEVICE
+ },
};
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-static struct s3c2410_uartcfg h1940_uartcfgs[] = {
+static struct s3c2410_uartcfg h1940_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
}
};
+/* Board control latch control */
+
+static unsigned int latch_state = H1940_LATCH_DEFAULT;
+
+void h1940_latch_control(unsigned int clear, unsigned int set)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ latch_state &= ~clear;
+ latch_state |= set;
+
+ __raw_writel(latch_state, H1940_LATCH);
+
+ local_irq_restore(flags);
+}
+
+EXPORT_SYMBOL_GPL(h1940_latch_control);
+
+static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd)
+{
+ printk(KERN_DEBUG "udc: pullup(%d)\n",cmd);
+
+ switch (cmd)
+ {
+ case S3C2410_UDC_P_ENABLE :
+ h1940_latch_control(0, H1940_LATCH_USB_DP);
+ break;
+ case S3C2410_UDC_P_DISABLE :
+ h1940_latch_control(H1940_LATCH_USB_DP, 0);
+ break;
+ case S3C2410_UDC_P_RESET :
+ break;
+ default:
+ break;
+ }
+}
+
+static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = {
+ .udc_command = h1940_udc_pullup,
+ .vbus_pin = S3C2410_GPG5,
+ .vbus_pin_inverted = 1,
+};
/**
.bpp= {16,16,16},
};
+static struct platform_device s3c_device_leds = {
+ .name = "h1940-leds",
+ .id = -1,
+};
+
+static struct platform_device s3c_device_bluetooth = {
+ .name = "h1940-bt",
+ .id = -1,
+};
+
static struct platform_device *h1940_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c,
&s3c_device_iis,
+ &s3c_device_usbgadget,
+ &s3c_device_leds,
+ &s3c_device_bluetooth,
};
-static struct s3c24xx_board h1940_board __initdata = {
- .devices = h1940_devices,
- .devices_count = ARRAY_SIZE(h1940_devices)
-};
-
-void __init h1940_map_io(void)
+static void __init h1940_map_io(void)
{
s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs));
- s3c24xx_set_board(&h1940_board);
+
+ /* setup PM */
+
+#ifdef CONFIG_PM_H1940
+ memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
+#endif
+ s3c2410_pm_init();
}
-void __init h1940_init_irq(void)
+static void __init h1940_init_irq(void)
{
s3c24xx_init_irq();
-
}
-void __init h1940_init(void)
+static void __init h1940_init(void)
{
- set_s3c2410fb_info(&h1940_lcdcfg);
+ u32 tmp;
+
+ s3c24xx_fb_set_platdata(&h1940_lcdcfg);
+ s3c24xx_udc_set_platdata(&h1940_udc_cfg);
+
+ /* Turn off suspend on both USB ports, and switch the
+ * selectable USB port to USB device mode. */
+
+ s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
+ S3C2410_MISCCR_USBSUSPND0 |
+ S3C2410_MISCCR_USBSUSPND1, 0x0);
+
+ tmp = (
+ 0x78 << S3C2410_PLLCON_MDIVSHIFT)
+ | (0x02 << S3C2410_PLLCON_PDIVSHIFT)
+ | (0x03 << S3C2410_PLLCON_SDIVSHIFT);
+ writel(tmp, S3C2410_UPLLCON);
+
+ platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
}
MACHINE_START(H1940, "IPAQ-H1940")
/* Maintainer: Ben Dooks <ben@fluff.org> */
- .phys_ram = S3C2410_SDRAM_PA,
.phys_io = S3C2410_PA_UART,
.io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
.boot_params = S3C2410_SDRAM_PA + 0x100,
.map_io = h1940_map_io,
.init_irq = h1940_init_irq,
- .init_machine = h1940_init,
+ .init_machine = h1940_init,
.timer = &s3c24xx_timer,
MACHINE_END