#include <linux/major.h>
#include <linux/fs.h>
#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
#include <linux/mmc/host.h>
+#include <linux/mfd/tc6393xb.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/pm.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+#include <linux/pda_power.h>
+#include <linux/spi/spi.h>
#include <asm/setup.h>
-#include <asm/memory.h>
#include <asm/mach-types.h>
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/udc.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
+#include <mach/pxa25x.h>
+#include <mach/reset.h>
+#include <mach/irda.h>
+#include <plat/i2c.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/tosa_bt.h>
+#include <mach/pxa2xx_spi.h>
+#include <mach/audio.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/tosa.h>
+#include <asm/mach/arch.h>
+#include <mach/tosa.h>
#include <asm/hardware/scoop.h>
#include <asm/mach/sharpsl_param.h>
#include "generic.h"
-
+#include "clock.h"
+#include "devices.h"
+
+static unsigned long tosa_pin_config[] = {
+ GPIO78_nCS_2, /* Scoop */
+ GPIO80_nCS_4, /* tg6393xb */
+ GPIO33_nCS_5, /* Scoop */
+
+ // GPIO76 CARD_VCC_ON1
+
+ GPIO19_GPIO, /* Reset out */
+ GPIO1_RST | WAKEUP_ON_EDGE_FALL,
+
+ GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* WAKE_UP */
+ GPIO2_GPIO | WAKEUP_ON_EDGE_BOTH, /* AC_IN */
+ GPIO3_GPIO | WAKEUP_ON_EDGE_FALL, /* RECORD */
+ GPIO4_GPIO | WAKEUP_ON_EDGE_FALL, /* SYNC */
+ GPIO20_GPIO, /* EAR_IN */
+ GPIO22_GPIO, /* On */
+
+ GPIO5_GPIO, /* USB_IN */
+ GPIO32_GPIO, /* Pen IRQ */
+
+ GPIO7_GPIO, /* Jacket Detect */
+ GPIO14_GPIO, /* BAT0_CRG */
+ GPIO12_GPIO, /* BAT1_CRG */
+ GPIO17_GPIO, /* BAT0_LOW */
+ GPIO84_GPIO, /* BAT1_LOW */
+ GPIO38_GPIO, /* BAT_LOCK */
+
+ GPIO11_3_6MHz,
+ GPIO15_GPIO, /* TC6393XB IRQ */
+ GPIO18_RDY,
+ GPIO27_GPIO, /* LCD Sync */
+
+ /* MMC */
+ GPIO6_MMC_CLK,
+ GPIO8_MMC_CS0,
+ GPIO9_GPIO, /* Detect */
+ GPIO10_GPIO, /* nSD_INT */
+
+ /* CF */
+ GPIO13_GPIO, /* CD_IRQ */
+ GPIO21_GPIO, /* Main Slot IRQ */
+ GPIO36_GPIO, /* Jacket Slot IRQ */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO52_nPCE_1,
+ GPIO53_nPCE_2,
+ GPIO54_nPSKTSEL,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+
+ /* AC97 */
+ GPIO31_AC97_SYNC,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ // GPIO79 nAUD_IRQ
+
+ /* FFUART */
+ GPIO34_FFUART_RXD,
+ GPIO35_FFUART_CTS,
+ GPIO37_FFUART_DSR,
+ GPIO39_FFUART_TXD,
+ GPIO40_FFUART_DTR,
+ GPIO41_FFUART_RTS,
+
+ /* BTUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_BTUART_RTS,
+
+ /* Keybd */
+ GPIO58_GPIO | MFP_LPM_DRIVE_LOW,
+ GPIO59_GPIO | MFP_LPM_DRIVE_LOW,
+ GPIO60_GPIO | MFP_LPM_DRIVE_LOW,
+ GPIO61_GPIO | MFP_LPM_DRIVE_LOW,
+ GPIO62_GPIO | MFP_LPM_DRIVE_LOW,
+ GPIO63_GPIO | MFP_LPM_DRIVE_LOW,
+ GPIO64_GPIO | MFP_LPM_DRIVE_LOW,
+ GPIO65_GPIO | MFP_LPM_DRIVE_LOW,
+ GPIO66_GPIO | MFP_LPM_DRIVE_LOW,
+ GPIO67_GPIO | MFP_LPM_DRIVE_LOW,
+ GPIO68_GPIO | MFP_LPM_DRIVE_LOW,
+ GPIO69_GPIO | MFP_LPM_DRIVE_LOW,
+ GPIO70_GPIO | MFP_LPM_DRIVE_LOW,
+ GPIO71_GPIO | MFP_LPM_DRIVE_LOW,
+ GPIO72_GPIO | MFP_LPM_DRIVE_LOW,
+ GPIO73_GPIO | MFP_LPM_DRIVE_LOW,
+ GPIO74_GPIO | MFP_LPM_DRIVE_LOW,
+ GPIO75_GPIO | MFP_LPM_DRIVE_LOW,
+
+ /* SPI */
+ GPIO81_SSP2_CLK_OUT,
+ GPIO82_SSP2_FRM_OUT,
+ GPIO83_SSP2_TXD,
+
+ /* IrDA is managed in other way */
+ GPIO46_GPIO,
+ GPIO47_GPIO,
+};
/*
* SCOOP Device
static struct scoop_config tosa_scoop_setup = {
.io_dir = TOSA_SCOOP_IO_DIR,
- .io_out = TOSA_SCOOP_IO_OUT,
-
+ .gpio_base = TOSA_SCOOP_GPIO_BASE,
};
-struct platform_device tosascoop_device = {
+static struct platform_device tosascoop_device = {
.name = "sharp-scoop",
.id = 0,
.dev = {
static struct scoop_config tosa_scoop_jc_setup = {
.io_dir = TOSA_SCOOP_JC_IO_DIR,
- .io_out = TOSA_SCOOP_JC_IO_OUT,
+ .gpio_base = TOSA_SCOOP_JC_GPIO_BASE,
};
-struct platform_device tosascoop_jc_device = {
+static struct platform_device tosascoop_jc_device = {
.name = "sharp-scoop",
.id = 1,
.dev = {
},
};
-static void tosa_pcmcia_init(void)
-{
- /* Setup default state of GPIO outputs
- before we enable them as outputs. */
- GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
- GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) |
- GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) |
- GPIO_bit(GPIO53_nPCE_2);
-
- pxa_gpio_mode(GPIO48_nPOE_MD);
- pxa_gpio_mode(GPIO49_nPWE_MD);
- pxa_gpio_mode(GPIO50_nPIOR_MD);
- pxa_gpio_mode(GPIO51_nPIOW_MD);
- pxa_gpio_mode(GPIO55_nPREG_MD);
- pxa_gpio_mode(GPIO56_nPWAIT_MD);
- pxa_gpio_mode(GPIO57_nIOIS16_MD);
- pxa_gpio_mode(GPIO52_nPCE_1_MD);
- pxa_gpio_mode(GPIO53_nPCE_2_MD);
- pxa_gpio_mode(GPIO54_pSKTSEL_MD);
-}
-
static struct scoop_pcmcia_config tosa_pcmcia_config = {
.devs = &tosa_pcmcia_scoop[0],
.num_devs = 2,
- .pcmcia_init = tosa_pcmcia_init,
};
/*
* USB Device Controller
*/
-static void tosa_udc_command(int cmd)
-{
- switch(cmd) {
- case PXA2XX_UDC_CMD_CONNECT:
- set_scoop_gpio(&tosascoop_jc_device.dev,TOSA_SCOOP_JC_USB_PULLUP);
- break;
- case PXA2XX_UDC_CMD_DISCONNECT:
- reset_scoop_gpio(&tosascoop_jc_device.dev,TOSA_SCOOP_JC_USB_PULLUP);
- break;
- }
-}
-
-static int tosa_udc_is_connected(void)
-{
- return ((GPLR(TOSA_GPIO_USB_IN) & GPIO_bit(TOSA_GPIO_USB_IN)) == 0);
-}
-
-
static struct pxa2xx_udc_mach_info udc_info __initdata = {
- .udc_command = tosa_udc_command,
- .udc_is_connected = tosa_udc_is_connected,
+ .gpio_pullup = TOSA_GPIO_USB_PULLUP,
+ .gpio_vbus = TOSA_GPIO_USB_IN,
+ .gpio_vbus_inverted = 1,
};
/*
* MMC/SD Device
*/
-static struct pxamci_platform_data tosa_mci_platform_data;
-
-static int tosa_mci_init(struct device *dev, irqreturn_t (*tosa_detect_int)(int, void *, struct pt_regs *), void *data)
+static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void *data)
{
int err;
- /* setup GPIO for PXA25x MMC controller */
- pxa_gpio_mode(GPIO6_MMCCLK_MD);
- pxa_gpio_mode(GPIO8_MMCCS0_MD);
- pxa_gpio_mode(TOSA_GPIO_nSD_DETECT | GPIO_IN);
-
- tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250);
-
- err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int, SA_INTERRUPT,
- "MMC/SD card detect", data);
+ err = gpio_request(TOSA_GPIO_nSD_INT, "SD Int");
if (err) {
- printk(KERN_ERR "tosa_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
- return -1;
+ printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n");
+ goto err_gpio_int;
}
-
- set_irq_type(TOSA_IRQ_GPIO_nSD_DETECT, IRQT_BOTHEDGE);
+ err = gpio_direction_input(TOSA_GPIO_nSD_INT);
+ if (err)
+ goto err_gpio_int_dir;
return 0;
-}
-
-static void tosa_mci_setpower(struct device *dev, unsigned int vdd)
-{
- struct pxamci_platform_data* p_d = dev->platform_data;
- if (( 1 << vdd) & p_d->ocr_mask) {
- set_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_PWR_ON);
- } else {
- reset_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_PWR_ON);
- }
-}
-
-static int tosa_mci_get_ro(struct device *dev)
-{
- return (read_scoop_reg(&tosascoop_device.dev, SCOOP_GPWR)&TOSA_SCOOP_SD_WP);
+err_gpio_int_dir:
+ gpio_free(TOSA_GPIO_nSD_INT);
+err_gpio_int:
+ return err;
}
static void tosa_mci_exit(struct device *dev, void *data)
{
- free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
+ gpio_free(TOSA_GPIO_nSD_INT);
}
static struct pxamci_platform_data tosa_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .init = tosa_mci_init,
- .get_ro = tosa_mci_get_ro,
- .setpower = tosa_mci_setpower,
- .exit = tosa_mci_exit,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .init = tosa_mci_init,
+ .exit = tosa_mci_exit,
+ .gpio_card_detect = TOSA_GPIO_nSD_DETECT,
+ .gpio_card_ro = TOSA_GPIO_SD_WP,
+ .gpio_power = TOSA_GPIO_PWR_ON,
};
/*
static void tosa_irda_transceiver_mode(struct device *dev, int mode)
{
if (mode & IR_OFF) {
- reset_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_IR_POWERDWN);
- pxa_gpio_mode(GPIO47_STTXD|GPIO_DFLT_LOW);
- pxa_gpio_mode(GPIO47_STTXD|GPIO_OUT);
+ gpio_set_value(TOSA_GPIO_IR_POWERDWN, 0);
+ pxa2xx_transceiver_mode(dev, mode);
+ gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
} else {
- pxa_gpio_mode(GPIO47_STTXD_MD);
- set_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_IR_POWERDWN);
+ pxa2xx_transceiver_mode(dev, mode);
+ gpio_set_value(TOSA_GPIO_IR_POWERDWN, 1);
}
}
+static int tosa_irda_startup(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(TOSA_GPIO_IRDA_TX, "IrDA TX");
+ if (ret)
+ goto err_tx;
+ ret = gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
+ if (ret)
+ goto err_tx_dir;
+
+ ret = gpio_request(TOSA_GPIO_IR_POWERDWN, "IrDA powerdown");
+ if (ret)
+ goto err_pwr;
+
+ ret = gpio_direction_output(TOSA_GPIO_IR_POWERDWN, 0);
+ if (ret)
+ goto err_pwr_dir;
+
+ tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
+
+ return 0;
+
+err_pwr_dir:
+ gpio_free(TOSA_GPIO_IR_POWERDWN);
+err_pwr:
+err_tx_dir:
+ gpio_free(TOSA_GPIO_IRDA_TX);
+err_tx:
+ return ret;
+}
+
+static void tosa_irda_shutdown(struct device *dev)
+{
+ tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
+ gpio_free(TOSA_GPIO_IR_POWERDWN);
+ gpio_free(TOSA_GPIO_IRDA_TX);
+}
+
static struct pxaficp_platform_data tosa_ficp_platform_data = {
- .transceiver_cap = IR_SIRMODE | IR_OFF,
- .transceiver_mode = tosa_irda_transceiver_mode,
+ .gpio_pwdown = -1,
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
+ .transceiver_mode = tosa_irda_transceiver_mode,
+ .startup = tosa_irda_startup,
+ .shutdown = tosa_irda_shutdown,
+};
+
+/*
+ * Tosa AC IN
+ */
+static int tosa_power_init(struct device *dev)
+{
+ int ret = gpio_request(TOSA_GPIO_AC_IN, "ac in");
+ if (ret)
+ goto err_gpio_req;
+
+ ret = gpio_direction_input(TOSA_GPIO_AC_IN);
+ if (ret)
+ goto err_gpio_in;
+
+ return 0;
+
+err_gpio_in:
+ gpio_free(TOSA_GPIO_AC_IN);
+err_gpio_req:
+ return ret;
+}
+
+static void tosa_power_exit(struct device *dev)
+{
+ gpio_free(TOSA_GPIO_AC_IN);
+}
+
+static int tosa_power_ac_online(void)
+{
+ return gpio_get_value(TOSA_GPIO_AC_IN) == 0;
+}
+
+static char *tosa_ac_supplied_to[] = {
+ "main-battery",
+ "backup-battery",
+ "jacket-battery",
+};
+
+static struct pda_power_pdata tosa_power_data = {
+ .init = tosa_power_init,
+ .is_ac_online = tosa_power_ac_online,
+ .exit = tosa_power_exit,
+ .supplied_to = tosa_ac_supplied_to,
+ .num_supplicants = ARRAY_SIZE(tosa_ac_supplied_to),
+};
+
+static struct resource tosa_power_resource[] = {
+ {
+ .name = "ac",
+ .start = gpio_to_irq(TOSA_GPIO_AC_IN),
+ .end = gpio_to_irq(TOSA_GPIO_AC_IN),
+ .flags = IORESOURCE_IRQ |
+ IORESOURCE_IRQ_HIGHEDGE |
+ IORESOURCE_IRQ_LOWEDGE,
+ },
+};
+
+static struct platform_device tosa_power_device = {
+ .name = "pda-power",
+ .id = -1,
+ .dev.platform_data = &tosa_power_data,
+ .resource = tosa_power_resource,
+ .num_resources = ARRAY_SIZE(tosa_power_resource),
};
/*
.id = -1,
};
+static struct gpio_keys_button tosa_gpio_keys[] = {
+ /*
+ * Two following keys are directly tied to "ON" button of tosa. Why?
+ * The first one can be used as a wakeup source, the second can't;
+ * also the first one is OR of ac_powered and on_button.
+ */
+ {
+ .type = EV_PWR,
+ .code = KEY_RESERVED,
+ .gpio = TOSA_GPIO_POWERON,
+ .desc = "Poweron",
+ .wakeup = 1,
+ .active_low = 1,
+ },
+ {
+ .type = EV_PWR,
+ .code = KEY_SUSPEND,
+ .gpio = TOSA_GPIO_ON_KEY,
+ .desc = "On key",
+ /*
+ * can't be used as wakeup
+ * .wakeup = 1,
+ */
+ .active_low = 1,
+ },
+ {
+ .type = EV_KEY,
+ .code = TOSA_KEY_RECORD,
+ .gpio = TOSA_GPIO_RECORD_BTN,
+ .desc = "Record Button",
+ .wakeup = 1,
+ .active_low = 1,
+ },
+ {
+ .type = EV_KEY,
+ .code = TOSA_KEY_SYNC,
+ .gpio = TOSA_GPIO_SYNC,
+ .desc = "Sync Button",
+ .wakeup = 1,
+ .active_low = 1,
+ },
+ {
+ .type = EV_SW,
+ .code = SW_HEADPHONE_INSERT,
+ .gpio = TOSA_GPIO_EAR_IN,
+ .desc = "HeadPhone insert",
+ .active_low = 1,
+ .debounce_interval = 300,
+ },
+};
+
+static struct gpio_keys_platform_data tosa_gpio_keys_platform_data = {
+ .buttons = tosa_gpio_keys,
+ .nbuttons = ARRAY_SIZE(tosa_gpio_keys),
+};
+
+static struct platform_device tosa_gpio_keys_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &tosa_gpio_keys_platform_data,
+ },
+};
+
/*
* Tosa LEDs
*/
+static struct gpio_led tosa_gpio_leds[] = {
+ {
+ .name = "tosa:amber:charge",
+ .default_trigger = "main-battery-charging",
+ .gpio = TOSA_GPIO_CHRG_ERR_LED,
+ },
+ {
+ .name = "tosa:green:mail",
+ .default_trigger = "nand-disk",
+ .gpio = TOSA_GPIO_NOTE_LED,
+ },
+ {
+ .name = "tosa:dual:wlan",
+ .default_trigger = "none",
+ .gpio = TOSA_GPIO_WLAN_LED,
+ },
+ {
+ .name = "tosa:blue:bluetooth",
+ .default_trigger = "tosa-bt",
+ .gpio = TOSA_GPIO_BT_LED,
+ },
+};
+
+static struct gpio_led_platform_data tosa_gpio_leds_platform_data = {
+ .leds = tosa_gpio_leds,
+ .num_leds = ARRAY_SIZE(tosa_gpio_leds),
+};
+
static struct platform_device tosaled_device = {
- .name = "tosa-led",
- .id = -1,
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &tosa_gpio_leds_platform_data,
+ },
+};
+
+/*
+ * Toshiba Mobile IO Controller
+ */
+static struct resource tc6393xb_resources[] = {
+ [0] = {
+ .start = TOSA_LCDC_PHYS,
+ .end = TOSA_LCDC_PHYS + 0x3ffffff,
+ .flags = IORESOURCE_MEM,
+ },
+
+ [1] = {
+ .start = TOSA_IRQ_GPIO_TC6393XB_INT,
+ .end = TOSA_IRQ_GPIO_TC6393XB_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+
+static int tosa_tc6393xb_enable(struct platform_device *dev)
+{
+ int rc;
+
+ rc = gpio_request(TOSA_GPIO_TC6393XB_REST_IN, "tc6393xb #pclr");
+ if (rc)
+ goto err_req_pclr;
+ rc = gpio_request(TOSA_GPIO_TC6393XB_SUSPEND, "tc6393xb #suspend");
+ if (rc)
+ goto err_req_suspend;
+ rc = gpio_request(TOSA_GPIO_TC6393XB_L3V_ON, "tc6393xb l3v");
+ if (rc)
+ goto err_req_l3v;
+ rc = gpio_direction_output(TOSA_GPIO_TC6393XB_L3V_ON, 0);
+ if (rc)
+ goto err_dir_l3v;
+ rc = gpio_direction_output(TOSA_GPIO_TC6393XB_SUSPEND, 0);
+ if (rc)
+ goto err_dir_suspend;
+ rc = gpio_direction_output(TOSA_GPIO_TC6393XB_REST_IN, 0);
+ if (rc)
+ goto err_dir_pclr;
+
+ mdelay(1);
+
+ gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1);
+
+ mdelay(10);
+
+ gpio_set_value(TOSA_GPIO_TC6393XB_REST_IN, 1);
+ gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1);
+
+ return 0;
+err_dir_pclr:
+err_dir_suspend:
+err_dir_l3v:
+ gpio_free(TOSA_GPIO_TC6393XB_L3V_ON);
+err_req_l3v:
+ gpio_free(TOSA_GPIO_TC6393XB_SUSPEND);
+err_req_suspend:
+ gpio_free(TOSA_GPIO_TC6393XB_REST_IN);
+err_req_pclr:
+ return rc;
+}
+
+static int tosa_tc6393xb_disable(struct platform_device *dev)
+{
+ gpio_free(TOSA_GPIO_TC6393XB_L3V_ON);
+ gpio_free(TOSA_GPIO_TC6393XB_SUSPEND);
+ gpio_free(TOSA_GPIO_TC6393XB_REST_IN);
+
+ return 0;
+}
+
+static int tosa_tc6393xb_resume(struct platform_device *dev)
+{
+ gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1);
+ mdelay(10);
+ gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1);
+ mdelay(10);
+
+ return 0;
+}
+
+static int tosa_tc6393xb_suspend(struct platform_device *dev)
+{
+ gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 0);
+ gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 0);
+ return 0;
+}
+
+static struct mtd_partition tosa_nand_partition[] = {
+ {
+ .name = "smf",
+ .offset = 0,
+ .size = 7 * 1024 * 1024,
+ },
+ {
+ .name = "root",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 28 * 1024 * 1024,
+ },
+ {
+ .name = "home",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr tosa_tc6393xb_nand_bbt = {
+ .options = 0,
+ .offs = 4,
+ .len = 2,
+ .pattern = scan_ff_pattern
+};
+
+static struct tmio_nand_data tosa_tc6393xb_nand_config = {
+ .num_partitions = ARRAY_SIZE(tosa_nand_partition),
+ .partition = tosa_nand_partition,
+ .badblock_pattern = &tosa_tc6393xb_nand_bbt,
+};
+
+static int tosa_tc6393xb_setup(struct platform_device *dev)
+{
+ int rc;
+
+ rc = gpio_request(TOSA_GPIO_CARD_VCC_ON, "CARD_VCC_ON");
+ if (rc)
+ goto err_req;
+
+ rc = gpio_direction_output(TOSA_GPIO_CARD_VCC_ON, 1);
+ if (rc)
+ goto err_dir;
+
+ return rc;
+
+err_dir:
+ gpio_free(TOSA_GPIO_CARD_VCC_ON);
+err_req:
+ return rc;
+}
+
+static void tosa_tc6393xb_teardown(struct platform_device *dev)
+{
+ gpio_free(TOSA_GPIO_CARD_VCC_ON);
+}
+
+#ifdef CONFIG_MFD_TC6393XB
+static struct fb_videomode tosa_tc6393xb_lcd_mode[] = {
+ {
+ .xres = 480,
+ .yres = 640,
+ .pixclock = 0x002cdf00,/* PLL divisor */
+ .left_margin = 0x004c,
+ .right_margin = 0x005b,
+ .upper_margin = 0x0001,
+ .lower_margin = 0x000d,
+ .hsync_len = 0x0002,
+ .vsync_len = 0x0001,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },{
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 0x00e7f203,/* PLL divisor */
+ .left_margin = 0x0024,
+ .right_margin = 0x002f,
+ .upper_margin = 0x0001,
+ .lower_margin = 0x000d,
+ .hsync_len = 0x0002,
+ .vsync_len = 0x0001,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED,
+ }
+};
+
+static struct tmio_fb_data tosa_tc6393xb_fb_config = {
+ .lcd_set_power = tc6393xb_lcd_set_power,
+ .lcd_mode = tc6393xb_lcd_mode,
+ .num_modes = ARRAY_SIZE(tosa_tc6393xb_lcd_mode),
+ .modes = &tosa_tc6393xb_lcd_mode[0],
+ .height = 82,
+ .width = 60,
+};
+#endif
+
+static struct tc6393xb_platform_data tosa_tc6393xb_data = {
+ .scr_pll2cr = 0x0cc1,
+ .scr_gper = 0x3300,
+
+ .irq_base = IRQ_BOARD_START,
+ .gpio_base = TOSA_TC6393XB_GPIO_BASE,
+ .setup = tosa_tc6393xb_setup,
+ .teardown = tosa_tc6393xb_teardown,
+
+ .enable = tosa_tc6393xb_enable,
+ .disable = tosa_tc6393xb_disable,
+ .suspend = tosa_tc6393xb_suspend,
+ .resume = tosa_tc6393xb_resume,
+
+ .nand_data = &tosa_tc6393xb_nand_config,
+#ifdef CONFIG_MFD_TC6393XB
+ .fb_data = &tosa_tc6393xb_fb_config,
+#endif
+
+ .resume_restore = 1,
+};
+
+
+static struct platform_device tc6393xb_device = {
+ .name = "tc6393xb",
+ .id = -1,
+ .dev = {
+ .platform_data = &tosa_tc6393xb_data,
+ },
+ .num_resources = ARRAY_SIZE(tc6393xb_resources),
+ .resource = tc6393xb_resources,
+};
+
+static struct tosa_bt_data tosa_bt_data = {
+ .gpio_pwr = TOSA_GPIO_BT_PWR_EN,
+ .gpio_reset = TOSA_GPIO_BT_RESET,
+};
+
+static struct platform_device tosa_bt_device = {
+ .name = "tosa-bt",
+ .id = -1,
+ .dev.platform_data = &tosa_bt_data,
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_info = {
+ .num_chipselect = 1,
+};
+
+static struct spi_board_info spi_board_info[] __initdata = {
+ {
+ .modalias = "tosa-lcd",
+ // .platform_data
+ .max_speed_hz = 28750,
+ .bus_num = 2,
+ .chip_select = 0,
+ .mode = SPI_MODE_0,
+ },
+};
+
+static struct mtd_partition sharpsl_rom_parts[] = {
+ {
+ .name ="Boot PROM Filesystem",
+ .offset = 0x00160000,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct physmap_flash_data sharpsl_rom_data = {
+ .width = 2,
+ .nr_parts = ARRAY_SIZE(sharpsl_rom_parts),
+ .parts = sharpsl_rom_parts,
+};
+
+static struct resource sharpsl_rom_resources[] = {
+ {
+ .start = 0x00000000,
+ .end = 0x007fffff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device sharpsl_rom_device = {
+ .name = "physmap-flash",
+ .id = -1,
+ .resource = sharpsl_rom_resources,
+ .num_resources = ARRAY_SIZE(sharpsl_rom_resources),
+ .dev.platform_data = &sharpsl_rom_data,
};
static struct platform_device *devices[] __initdata = {
&tosascoop_device,
&tosascoop_jc_device,
+ &tc6393xb_device,
+ &tosa_power_device,
&tosakbd_device,
+ &tosa_gpio_keys_device,
&tosaled_device,
+ &tosa_bt_device,
+ &sharpsl_rom_device,
};
+static void tosa_poweroff(void)
+{
+ arm_machine_restart('g', NULL);
+}
+
+static void tosa_restart(char mode, const char *cmd)
+{
+ /* Bootloader magic for a reboot */
+ if((MSC0 & 0xffff0000) == 0x7ff00000)
+ MSC0 = (MSC0 & 0xffff) | 0x7ee00000;
+
+ tosa_poweroff();
+}
+
static void __init tosa_init(void)
{
- pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_IN);
- pxa_gpio_mode(TOSA_GPIO_TC6393_INT | GPIO_IN);
- pxa_gpio_mode(TOSA_GPIO_USB_IN | GPIO_IN);
-
- /* setup sleep mode values */
- PWER = 0x00000002;
- PFER = 0x00000000;
- PRER = 0x00000002;
- PGSR0 = 0x00000000;
- PGSR1 = 0x00FF0002;
- PGSR2 = 0x00014000;
+ int dummy;
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_config));
+
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ gpio_set_wake(MFP_PIN_GPIO1, 1);
+ /* We can't pass to gpio-keys since it will drop the Reset altfunc */
+
+ init_gpio_reset(TOSA_GPIO_ON_RESET, 0, 0);
+
+ pm_power_off = tosa_poweroff;
+ arm_pm_restart = tosa_restart;
+
PCFR |= PCFR_OPDE;
/* enable batt_fault */
PMCR = 0x01;
+ dummy = gpiochip_reserve(TOSA_SCOOP_GPIO_BASE, 12);
+ dummy = gpiochip_reserve(TOSA_SCOOP_JC_GPIO_BASE, 12);
+ dummy = gpiochip_reserve(TOSA_TC6393XB_GPIO_BASE, 16);
+
+ tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250);
pxa_set_mci_info(&tosa_mci_platform_data);
pxa_set_udc_info(&udc_info);
pxa_set_ficp_info(&tosa_ficp_platform_data);
+ pxa_set_i2c_info(NULL);
+ pxa_set_ac97_info(NULL);
platform_scoop_config = &tosa_pcmcia_config;
+ pxa2xx_set_spi_info(2, &pxa_ssp_master_info);
+ spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+
+ clk_add_alias("CLK_CK3P6MI", tc6393xb_device.name, "GPIO11_CLK", NULL);
+
platform_add_devices(devices, ARRAY_SIZE(devices));
}
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.fixup = fixup_tosa,
.map_io = pxa_map_io,
- .init_irq = pxa_init_irq,
+ .init_irq = pxa25x_init_irq,
.init_machine = tosa_init,
.timer = &pxa_timer,
MACHINE_END
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff