netns xfrm: fix "ip xfrm state|policy count" misreport

[safe/jmp/linux-2.6] / arch / arm / mach-pxa / littleton.c

diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index c872b9f..fa527b2 100644 (file)
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -42,14 +42,17 @@
 #include <mach/pxa300.h>
 #include <mach/pxafb.h>
 #include <mach/ssp.h>
+#include <mach/mmc.h>
 #include <mach/pxa2xx_spi.h>
-#include <mach/i2c.h>
 #include <mach/pxa27x_keypad.h>
-#include <mach/pxa3xx_nand.h>
 #include <mach/littleton.h>
+#include <plat/i2c.h>
+#include <plat/pxa3xx_nand.h>
 
 #include "generic.h"
 
+#define GPIO_MMC1_CARD_DETECT  mfp_to_gpio(MFP_PIN_GPIO15)
+
 /* Littleton MFP configurations */
 static mfp_cfg_t littleton_mfp_cfg[] __initdata = {
        /* LCD */
@@ -98,6 +101,21 @@ static mfp_cfg_t littleton_mfp_cfg[] __initdata = {
        GPIO123_KP_MKOUT_2,
        GPIO124_KP_MKOUT_3,
        GPIO125_KP_MKOUT_4,
+
+       /* MMC1 */
+       GPIO3_MMC1_DAT0,
+       GPIO4_MMC1_DAT1,
+       GPIO5_MMC1_DAT2,
+       GPIO6_MMC1_DAT3,
+       GPIO7_MMC1_CLK,
+       GPIO8_MMC1_CMD,
+       GPIO15_GPIO, /* card detect */
+
+       /* UART3 */
+       GPIO107_UART3_CTS,
+       GPIO108_UART3_RTS,
+       GPIO109_UART3_TXD,
+       GPIO110_UART3_RXD,
 };
 
 static struct resource smc91x_resources[] = {
@@ -179,15 +197,10 @@ static struct pxa2xx_spi_master littleton_spi_info = {
        .num_chipselect         = 1,
 };
 
-static void littleton_tdo24m_cs(u32 cmd)
-{
-       gpio_set_value(LITTLETON_GPIO_LCD_CS, !(cmd == PXA2XX_CS_ASSERT));
-}
-
 static struct pxa2xx_spi_chip littleton_tdo24m_chip = {
        .rx_threshold   = 1,
        .tx_threshold   = 1,
-       .cs_control     = littleton_tdo24m_cs,
+       .gpio_cs        = LITTLETON_GPIO_LCD_CS,
 };
 
 static struct spi_board_info littleton_spi_devices[] __initdata = {
@@ -202,16 +215,6 @@ static struct spi_board_info littleton_spi_devices[] __initdata = {
 
 static void __init littleton_init_spi(void)
 {
-       int err;
-
-       err = gpio_request(LITTLETON_GPIO_LCD_CS, "LCD_CS");
-       if (err) {
-               pr_warning("failed to request GPIO for LCS CS\n");
-               return;
-       }
-
-       gpio_direction_output(LITTLETON_GPIO_LCD_CS, 1);
-
        pxa2xx_set_spi_info(2, &littleton_spi_info);
        spi_register_board_info(ARRAY_AND_SIZE(littleton_spi_devices));
 }
@@ -267,6 +270,23 @@ static void __init littleton_init_keypad(void)
 static inline void littleton_init_keypad(void) {}
 #endif
 
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static struct pxamci_platform_data littleton_mci_platform_data = {
+       .detect_delay           = 20,
+       .ocr_mask               = MMC_VDD_32_33 | MMC_VDD_33_34,
+       .gpio_card_detect       = GPIO_MMC1_CARD_DETECT,
+       .gpio_card_ro           = -1,
+       .gpio_power             = -1,
+};
+
+static void __init littleton_init_mmc(void)
+{
+       pxa_set_mci_info(&littleton_mci_platform_data);
+}
+#else
+static inline void littleton_init_mmc(void) {}
+#endif
+
 #if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
 static struct mtd_partition littleton_nand_partitions[] = {
        [0] = {
@@ -399,6 +419,10 @@ static void __init littleton_init(void)
        /* initialize MFP configurations */
        pxa3xx_mfp_config(ARRAY_AND_SIZE(littleton_mfp_cfg));
 
+       pxa_set_ffuart_info(NULL);
+       pxa_set_btuart_info(NULL);
+       pxa_set_stuart_info(NULL);
+
        /*
         * Note: we depend bootloader set the correct
         * value to MSC register for SMC91x.
@@ -407,6 +431,7 @@ static void __init littleton_init(void)
 
        littleton_init_spi();
        littleton_init_i2c();
+       littleton_init_mmc();
        littleton_init_lcd();
        littleton_init_keypad();
        littleton_init_nand();