#include <linux/fs.h>
#include <linux/interrupt.h>
#include <linux/mmc/host.h>
+#include <linux/pm.h>
+#include <linux/backlight.h>
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
+#include <asm/system.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/arch/pxa-regs.h>
-#include <asm/arch/irq.h>
#include <asm/arch/irda.h>
#include <asm/arch/mmc.h>
#include <asm/arch/udc.h>
#include <asm/hardware/scoop.h>
#include "generic.h"
+#include "devices.h"
#include "sharpsl.h"
.io_out = CORGI_SCOOP_IO_OUT,
};
+struct platform_device corgiscoop_device = {
+ .name = "sharp-scoop",
+ .id = -1,
+ .dev = {
+ .platform_data = &corgi_scoop_setup,
+ },
+ .num_resources = ARRAY_SIZE(corgi_scoop_resources),
+ .resource = corgi_scoop_resources,
+};
+
+static void corgi_pcmcia_init(void)
+{
+ /* Setup default state of GPIO outputs
+ before we enable them as outputs. */
+ GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
+ GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) |
+ GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) |
+ GPIO_bit(GPIO53_nPCE_2);
+
+ pxa_gpio_mode(GPIO48_nPOE_MD);
+ pxa_gpio_mode(GPIO49_nPWE_MD);
+ pxa_gpio_mode(GPIO50_nPIOR_MD);
+ pxa_gpio_mode(GPIO51_nPIOW_MD);
+ pxa_gpio_mode(GPIO55_nPREG_MD);
+ pxa_gpio_mode(GPIO56_nPWAIT_MD);
+ pxa_gpio_mode(GPIO57_nIOIS16_MD);
+ pxa_gpio_mode(GPIO52_nPCE_1_MD);
+ pxa_gpio_mode(GPIO53_nPCE_2_MD);
+ pxa_gpio_mode(GPIO54_pSKTSEL_MD);
+}
+
static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = {
{
.dev = &corgiscoop_device.dev,
},
};
-struct platform_device corgiscoop_device = {
- .name = "sharp-scoop",
- .id = -1,
- .dev = {
- .platform_data = &corgi_scoop_setup,
- },
- .num_resources = ARRAY_SIZE(corgi_scoop_resources),
- .resource = corgi_scoop_resources,
+static struct scoop_pcmcia_config corgi_pcmcia_config = {
+ .devs = &corgi_pcmcia_scoop[0],
+ .num_devs = 1,
+ .pcmcia_init = corgi_pcmcia_init,
};
+EXPORT_SYMBOL(corgiscoop_device);
+
/*
* Corgi SSP Device
/*
* Corgi Backlight Device
*/
-static struct corgibl_machinfo corgi_bl_machinfo = {
+static void corgi_bl_kick_battery(void)
+{
+ void (*kick_batt)(void);
+
+ kick_batt = symbol_get(sharpsl_battery_kick);
+ if (kick_batt) {
+ kick_batt();
+ symbol_put(sharpsl_battery_kick);
+ }
+}
+
+static struct generic_bl_info corgi_bl_machinfo = {
+ .name = "corgi-bl",
.max_intensity = 0x2f,
+ .default_intensity = 0x1f,
+ .limit_mask = 0x0b,
.set_bl_intensity = corgi_bl_set_intensity,
+ .kick_battery = corgi_bl_kick_battery,
};
static struct platform_device corgibl_device = {
- .name = "corgi-bl",
+ .name = "generic-bl",
.dev = {
.parent = &corgifb_device.dev,
.platform_data = &corgi_bl_machinfo,
/*
+ * Corgi LEDs
+ */
+static struct platform_device corgiled_device = {
+ .name = "corgi-led",
+ .id = -1,
+};
+
+/*
* Corgi Touch Screen Device
*/
static struct resource corgits_resources[] = {
*/
static struct pxamci_platform_data corgi_mci_platform_data;
-static int corgi_mci_init(struct device *dev, irqreturn_t (*corgi_detect_int)(int, void *, struct pt_regs *), void *data)
+static int corgi_mci_init(struct device *dev, irq_handler_t corgi_detect_int, void *data)
{
int err;
corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250);
- err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_detect_int, SA_INTERRUPT,
- "MMC card detect", data);
+ err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_detect_int,
+ IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "MMC card detect", data);
if (err) {
printk(KERN_ERR "corgi_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
return -1;
}
- set_irq_type(CORGI_IRQ_GPIO_nSD_DETECT, IRQT_BOTHEDGE);
-
return 0;
}
/*
* USB Device Controller
*/
-static void corgi_udc_command(int cmd)
-{
- switch(cmd) {
- case PXA2XX_UDC_CMD_CONNECT:
- GPSR(CORGI_GPIO_USB_PULLUP) = GPIO_bit(CORGI_GPIO_USB_PULLUP);
- break;
- case PXA2XX_UDC_CMD_DISCONNECT:
- GPCR(CORGI_GPIO_USB_PULLUP) = GPIO_bit(CORGI_GPIO_USB_PULLUP);
- break;
- }
-}
-
static struct pxa2xx_udc_mach_info udc_info __initdata = {
/* no connect GPIO; corgi can't tell connection status */
- .udc_command = corgi_udc_command,
+ .gpio_pullup = CORGI_GPIO_USB_PULLUP,
};
&corgikbd_device,
&corgibl_device,
&corgits_device,
+ &corgiled_device,
};
+static void corgi_poweroff(void)
+{
+ RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
+
+ if (!machine_is_corgi())
+ /* Green LED off tells the bootloader to halt */
+ reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);
+ arm_machine_restart('h');
+}
+
+static void corgi_restart(char mode)
+{
+ RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
+
+ if (!machine_is_corgi())
+ /* Green LED on tells the bootloader to reboot */
+ set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);
+ arm_machine_restart('h');
+}
+
static void __init corgi_init(void)
{
+ pm_power_off = corgi_poweroff;
+ arm_pm_restart = corgi_restart;
+
/* setup sleep mode values */
PWER = 0x00000002;
PFER = 0x00000000;
corgi_ssp_set_machinfo(&corgi_ssp_machinfo);
pxa_gpio_mode(CORGI_GPIO_IR_ON | GPIO_OUT);
- pxa_gpio_mode(CORGI_GPIO_USB_PULLUP | GPIO_OUT);
pxa_gpio_mode(CORGI_GPIO_HSYNC | GPIO_IN);
pxa_set_udc_info(&udc_info);
pxa_set_mci_info(&corgi_mci_platform_data);
pxa_set_ficp_info(&corgi_ficp_platform_data);
- scoop_num = 1;
- scoop_devs = &corgi_pcmcia_scoop[0];
+ platform_scoop_config = &corgi_pcmcia_config;
platform_add_devices(devices, ARRAY_SIZE(devices));
}
#ifdef CONFIG_MACH_CORGI
MACHINE_START(CORGI, "SHARP Corgi")
- .phys_ram = 0xa0000000,
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.fixup = fixup_corgi,
.map_io = pxa_map_io,
- .init_irq = pxa_init_irq,
+ .init_irq = pxa25x_init_irq,
.init_machine = corgi_init,
.timer = &pxa_timer,
MACHINE_END
#ifdef CONFIG_MACH_SHEPHERD
MACHINE_START(SHEPHERD, "SHARP Shepherd")
- .phys_ram = 0xa0000000,
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.fixup = fixup_corgi,
.map_io = pxa_map_io,
- .init_irq = pxa_init_irq,
+ .init_irq = pxa25x_init_irq,
.init_machine = corgi_init,
.timer = &pxa_timer,
MACHINE_END
#ifdef CONFIG_MACH_HUSKY
MACHINE_START(HUSKY, "SHARP Husky")
- .phys_ram = 0xa0000000,
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.fixup = fixup_corgi,
.map_io = pxa_map_io,
- .init_irq = pxa_init_irq,
+ .init_irq = pxa25x_init_irq,
.init_machine = corgi_init,
.timer = &pxa_timer,
MACHINE_END