/*
* arch/arm/mach-pxa/colibri-pxa300.c
*
- * Support for Toradex PXA300 based Colibri module
+ * Support for Toradex PXA300/310 based Colibri module
+ *
* Daniel Mack <daniel@caiaq.de>
+ * Matthias Meier <matthias.j.meier@gmx.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
-#include <net/ax88796.h>
+#include <linux/interrupt.h>
#include <asm/mach-types.h>
+#include <asm/sizes.h>
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
#include <mach/pxa300.h>
#include <mach/colibri.h>
-#include <mach/mmc.h>
#include <mach/ohci.h>
+#include <mach/pxafb.h>
#include "generic.h"
#include "devices.h"
-/*
- * GPIO configuration
- */
-static mfp_cfg_t colibri_pxa300_pin_config[] __initdata = {
- GPIO1_nCS2, /* AX88796 chip select */
- GPIO26_GPIO | MFP_PULL_HIGH, /* AX88796 IRQ */
-
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
- GPIO7_MMC1_CLK,
- GPIO14_MMC1_CMD,
- GPIO3_MMC1_DAT0,
- GPIO4_MMC1_DAT1,
- GPIO5_MMC1_DAT2,
- GPIO6_MMC1_DAT3,
-#endif
-
-#if defined (CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
- GPIO0_2_USBH_PEN,
- GPIO1_2_USBH_PWR,
-#endif
-};
-
#if defined(CONFIG_AX88796)
+#define COLIBRI_ETH_IRQ_GPIO mfp_to_gpio(GPIO26_GPIO)
+
/*
* Asix AX88796 Ethernet
*/
static struct ax_plat_data colibri_asix_platdata = {
- .flags = AXFLG_MAC_FROMDEV,
- .wordlength = 2
+ .flags = 0, /* defined later */
+ .wordlength = 2,
};
static struct resource colibri_asix_resource[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = COLIBRI_PXA300_ETH_IRQ,
- .end = COLIBRI_PXA300_ETH_IRQ,
- .flags = IORESOURCE_IRQ
+ .start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
+ .end = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
}
};
.platform_data = &colibri_asix_platdata
}
};
-#endif /* CONFIG_AX88796 */
-static struct platform_device *colibri_pxa300_devices[] __initdata = {
-#if defined(CONFIG_AX88796)
- &asix_device
-#endif
+static mfp_cfg_t colibri_pxa300_eth_pin_config[] __initdata = {
+ GPIO1_nCS2, /* AX88796 chip select */
+ GPIO26_GPIO | MFP_PULL_HIGH /* AX88796 IRQ */
};
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-#define MMC_DETECT_PIN mfp_to_gpio(MFP_PIN_GPIO13)
-
-static int colibri_pxa300_mci_init(struct device *dev,
- irq_handler_t colibri_mmc_detect_int,
- void *data)
+static void __init colibri_pxa300_init_eth(void)
{
- int ret;
-
- ret = gpio_request(MMC_DETECT_PIN, "mmc card detect");
- if (ret)
- return ret;
-
- gpio_direction_input(MMC_DETECT_PIN);
- ret = request_irq(gpio_to_irq(MMC_DETECT_PIN), colibri_mmc_detect_int,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- "MMC card detect", data);
- if (ret) {
- gpio_free(MMC_DETECT_PIN);
- return ret;
- }
-
- return 0;
+ colibri_pxa3xx_init_eth(&colibri_asix_platdata);
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_eth_pin_config));
+ platform_device_register(&asix_device);
}
+#else
+static inline void __init colibri_pxa300_init_eth(void) {}
+#endif /* CONFIG_AX88796 */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static mfp_cfg_t colibri_pxa300_usb_pin_config[] __initdata = {
+ GPIO0_2_USBH_PEN,
+ GPIO1_2_USBH_PWR,
+};
-static void colibri_pxa300_mci_exit(struct device *dev, void *data)
+static struct pxaohci_platform_data colibri_pxa300_ohci_info = {
+ .port_mode = PMM_GLOBAL_MODE,
+ .flags = ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+void __init colibri_pxa300_init_ohci(void)
{
- free_irq(MMC_DETECT_PIN, data);
- gpio_free(gpio_to_irq(MMC_DETECT_PIN));
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_usb_pin_config));
+ pxa_set_ohci_info(&colibri_pxa300_ohci_info);
}
+#else
+static inline void colibri_pxa300_init_ohci(void) {}
+#endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */
+
+static mfp_cfg_t colibri_pxa300_mmc_pin_config[] __initdata = {
+ GPIO7_MMC1_CLK,
+ GPIO14_MMC1_CMD,
+ GPIO3_MMC1_DAT0,
+ GPIO4_MMC1_DAT1,
+ GPIO5_MMC1_DAT2,
+ GPIO6_MMC1_DAT3,
+};
-static struct pxamci_platform_data colibri_pxa300_mci_platform_data = {
- .detect_delay = 20,
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .init = colibri_pxa300_mci_init,
- .exit = colibri_pxa300_mci_exit,
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static mfp_cfg_t colibri_pxa300_lcd_pin_config[] __initdata = {
+ GPIO54_LCD_LDD_0,
+ GPIO55_LCD_LDD_1,
+ GPIO56_LCD_LDD_2,
+ GPIO57_LCD_LDD_3,
+ GPIO58_LCD_LDD_4,
+ GPIO59_LCD_LDD_5,
+ GPIO60_LCD_LDD_6,
+ GPIO61_LCD_LDD_7,
+ GPIO62_LCD_LDD_8,
+ GPIO63_LCD_LDD_9,
+ GPIO64_LCD_LDD_10,
+ GPIO65_LCD_LDD_11,
+ GPIO66_LCD_LDD_12,
+ GPIO67_LCD_LDD_13,
+ GPIO68_LCD_LDD_14,
+ GPIO69_LCD_LDD_15,
+ GPIO70_LCD_LDD_16,
+ GPIO71_LCD_LDD_17,
+ GPIO62_LCD_CS_N,
+ GPIO72_LCD_FCLK,
+ GPIO73_LCD_LCLK,
+ GPIO74_LCD_PCLK,
+ GPIO75_LCD_BIAS,
+ GPIO76_LCD_VSYNC,
};
-static void __init colibri_pxa300_init_mmc(void)
+static void __init colibri_pxa300_init_lcd(void)
{
- pxa_set_mci_info(&colibri_pxa300_mci_platform_data);
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_lcd_pin_config));
}
#else
-static inline void colibri_pxa300_init_mmc(void) {}
-#endif /* CONFIG_MMC_PXA */
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static struct pxaohci_platform_data colibri_pxa300_ohci_info = {
- .port_mode = PMM_GLOBAL_MODE,
- .flags = ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+static inline void colibri_pxa300_init_lcd(void) {}
+#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
+
+#if defined(SND_AC97_CODEC) || defined(SND_AC97_CODEC_MODULE)
+static mfp_cfg_t colibri_pxa310_ac97_pin_config[] __initdata = {
+ GPIO24_AC97_SYSCLK,
+ GPIO23_AC97_nACRESET,
+ GPIO25_AC97_SDATA_IN_0,
+ GPIO27_AC97_SDATA_OUT,
+ GPIO28_AC97_SYNC,
+ GPIO29_AC97_BITCLK
};
-static void __init colibri_pxa300_init_ohci(void)
+static inline void __init colibri_pxa310_init_ac97(void)
{
- pxa_set_ohci_info(&colibri_pxa300_ohci_info);
+ /* no AC97 codec on Colibri PXA300 */
+ if (!cpu_is_pxa310())
+ return;
+
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa310_ac97_pin_config));
+ pxa_set_ac97_info(NULL);
}
#else
-static inline void colibri_pxa300_init_ohci(void) {}
-#endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */
+static inline void colibri_pxa310_init_ac97(void) {}
+#endif
-static void __init colibri_pxa300_init(void)
+void __init colibri_pxa300_init(void)
{
- set_irq_type(COLIBRI_PXA300_ETH_IRQ, IRQ_TYPE_EDGE_FALLING);
- pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_pin_config));
- platform_add_devices(ARRAY_AND_SIZE(colibri_pxa300_devices));
- colibri_pxa300_init_mmc();
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ colibri_pxa300_init_eth();
colibri_pxa300_init_ohci();
+ colibri_pxa3xx_init_nand();
+ colibri_pxa300_init_lcd();
+ colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO39_GPIO));
+ colibri_pxa310_init_ac97();
+ colibri_pxa3xx_init_mmc(ARRAY_AND_SIZE(colibri_pxa300_mmc_pin_config),
+ mfp_to_gpio(MFP_PIN_GPIO13));
}
MACHINE_START(COLIBRI300, "Toradex Colibri PXA300")
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff