[ARM] pxa: Palm Tungsten E2 basic support

[safe/jmp/linux-2.6] / arch / arm / mach-pxa / Kconfig

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index f27f6b3..3e66d90 100644 (file)
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -19,20 +19,37 @@ config CPU_PXA320
 config CPU_PXA930
        bool "PXA930 (codename Tavor-P)"
 
+config CPU_PXA935
+       bool "PXA935 (codename Tavor-P65)"
+
 endmenu
 
 endif
 
 config ARCH_GUMSTIX
-       bool "Gumstix XScale boards"
+       bool "Gumstix XScale 255 boards"
+       select PXA25x
        help
-         Say Y here if you intend to run this kernel on a
-         Gumstix Full Function Minature Computer.
+         Say Y here if you intend to run this kernel on
+         Basix, Connex, ws-200ax, ws-400ax systems
 
-config MACH_GUMSTIX_F
-       bool "Basix, Connex, ws-200ax, ws-400ax systems"
+choice
+       prompt "Gumstix Carrier/Expansion Board"
        depends on ARCH_GUMSTIX
-       select PXA25x
+
+config GUMSTIX_AM200EPD
+       bool "Enable AM200EPD board support"
+
+config GUMSTIX_AM300EPD
+       bool "Enable AM300EPD board support"
+
+endchoice
+
+config MACH_INTELMOTE2
+       bool "Intel Mote 2 Platform"
+       select PXA27x
+       select IWMMXT
+       select PXA_HAVE_BOARD_IRQS
 
 config ARCH_LUBBOCK
        bool "Intel DBPXA250 Development Platform"
@@ -71,6 +88,14 @@ config PXA_SHARPSL
          SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
          handheld computer.
 
+config CORGI_SSP_DEPRECATED
+       bool
+       select PXA_SSP
+       help
+         This option will include corgi_ssp.c and corgi_lcd.c
+         that corgi_ts.c and other legacy drivers (corgi_bl.c
+         and sharpsl_pm.c) may depend on.
+
 config MACH_POODLE
        bool "Enable Sharp SL-5600 (Poodle) Support"
        depends on PXA_SHARPSL
@@ -191,6 +216,10 @@ config MACH_E800
 config TRIZEPS_PXA
        bool "PXA based Keith und Koep Trizeps DIMM-Modules"
 
+config MACH_H5000
+       bool "HP iPAQ h5000"
+       select PXA25x
+
 config MACH_TRIZEPS4
        bool "Keith und Koep Trizeps4 DIMM-Module"
        depends on TRIZEPS_PXA
@@ -228,10 +257,24 @@ config MACH_EM_X270
        bool "CompuLab EM-x270 platform"
        select PXA27x
 
+config MACH_EXEDA
+       bool "CompuLab eXeda platform"
+       select PXA27x
+
 config MACH_COLIBRI
-       bool "Toradex Colibri PX27x"
+       bool "Toradex Colibri PXA270"
        select PXA27x
 
+config MACH_COLIBRI300
+       bool "Toradex Colibri PXA300/310"
+       select PXA3xx
+       select CPU_PXA300
+
+config MACH_COLIBRI320
+       bool "Toradex Colibri PXA320"
+       select PXA3xx
+       select CPU_PXA320
+
 config MACH_ZYLONITE
        bool "PXA3xx Development Platform (aka Zylonite)"
        select PXA3xx
@@ -257,7 +300,6 @@ config MACH_ARMCORE
        bool "CompuLab CM-X255/CM-X270 modules"
        select PXA27x
        select IWMMXT
-       select ZONE_DMA if PCI
        select PXA25x
        select PXA_SSP
 
@@ -270,13 +312,19 @@ config MACH_MAGICIAN
        bool "Enable HTC Magician Support"
        select PXA27x
        select IWMMXT
+       select PXA_SSP
+       select HAVE_PWM
        select PXA_HAVE_BOARD_IRQS
 
+config MACH_HIMALAYA
+       bool "HTC Himalaya Support"
+       select CPU_PXA26x
+       select FB_W100
+
 config MACH_MIOA701
        bool "Mitac Mio A701 Support"
        select PXA27x
        select IWMMXT
-       select LEDS_GPIO
        select HAVE_PWM
        select GPIO_SYSFS
        help
@@ -295,6 +343,25 @@ config ARCH_PXA_PALM
        bool "PXA based Palm PDAs"
        select HAVE_PWM
 
+config MACH_PALMTE2
+       bool "Palm Tungsten|E2"
+       default y
+       depends on ARCH_PXA_PALM
+       select PXA25x
+       help
+         Say Y here if you intend to run this kernel on a Palm Tungsten|E2
+         handheld computer.
+
+config MACH_PALMT5
+       bool "Palm Tungsten|T5"
+       default y
+       depends on ARCH_PXA_PALM
+       select PXA27x
+       select IWMMXT
+       help
+         Say Y here if you intend to run this kernel on a Palm Tungsten|T5
+         handheld computer.
+
 config MACH_PALMTX
        bool "Palm T|X"
        default y
@@ -315,6 +382,16 @@ config MACH_PALMZ72
          Say Y here if you intend to run this kernel on Palm Zire 72
          handheld computer.
 
+config MACH_PALMLD
+       bool "Palm LifeDrive"
+       default y
+       depends on ARCH_PXA_PALM
+       select PXA27x
+       select IWMMXT
+       help
+         Say Y here if you intend to run this kernel on a Palm LifeDrive
+         handheld computer.
+
 config MACH_PCM990_BASEBOARD
        bool "PHYTEC PCM-990 development board"
        select HAVE_PWM
@@ -335,9 +412,17 @@ config PCM990_DISPLAY_NONE
 
 endchoice
 
-config MACH_AM200EPD
-       depends on MACH_GUMSTIX_F
-       bool "Enable AM200EPD board support"
+config MACH_CSB726
+       bool "Enable Cogent CSB726 System On a Module"
+       select PXA27x
+       select IWMMXT
+       help
+         Say Y here if you intend to run this kernel on a Cogent
+         CSB726 System On Module.
+
+config CSB726_CSB701
+       bool "Enable supprot for CSB701 baseboard"
+       depends on MACH_CSB726
 
 config PXA_EZX
        bool "Motorola EZX Platform"
@@ -379,16 +464,25 @@ endmenu
 
 config PXA25x
        bool
+       select CPU_XSCALE
        help
          Select code specific to PXA21x/25x/26x variants
 
 config PXA27x
        bool
+       select CPU_XSCALE
        help
          Select code specific to PXA27x variants
 
+config CPU_PXA26x
+       bool
+       select PXA25x
+       help
+         Select code specific to PXA26x (codename Dalhart)
+
 config PXA3xx
        bool
+       select CPU_XSC3
        help
          Select code specific to PXA3xx variants