config CPU_PXA930
bool "PXA930 (codename Tavor-P)"
+config CPU_PXA935
+ bool "PXA935 (codename Tavor-P65)"
+
endmenu
endif
config ARCH_GUMSTIX
- bool "Gumstix XScale boards"
+ bool "Gumstix XScale 255 boards"
+ select PXA25x
help
- Say Y here if you intend to run this kernel on a
- Gumstix Full Function Minature Computer.
+ Say Y here if you intend to run this kernel on
+ Basix, Connex, ws-200ax, ws-400ax systems
-config MACH_GUMSTIX_F
- bool "Basix, Connex, ws-200ax, ws-400ax systems"
+choice
+ prompt "Gumstix Carrier/Expansion Board"
depends on ARCH_GUMSTIX
- select PXA25x
+
+config GUMSTIX_AM200EPD
+ bool "Enable AM200EPD board support"
+
+config GUMSTIX_AM300EPD
+ bool "Enable AM300EPD board support"
+
+endchoice
+
+config MACH_INTELMOTE2
+ bool "Intel Mote 2 Platform"
+ select PXA27x
+ select IWMMXT
+ select PXA_HAVE_BOARD_IRQS
config ARCH_LUBBOCK
bool "Intel DBPXA250 Development Platform"
select HAVE_PWM
select PXA_HAVE_BOARD_IRQS
+config MACH_MP900C
+ bool "Nec Mobilepro 900/c"
+ select PXA25x
+
config ARCH_PXA_IDP
bool "Accelent Xscale IDP"
select PXA25x
SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
handheld computer.
+config CORGI_SSP_DEPRECATED
+ bool
+ select PXA_SSP
+ help
+ This option will include corgi_ssp.c and corgi_lcd.c
+ that corgi_ts.c and other legacy drivers (corgi_bl.c
+ and sharpsl_pm.c) may depend on.
+
config MACH_POODLE
bool "Enable Sharp SL-5600 (Poodle) Support"
depends on PXA_SHARPSL
Say Y here if you intend to run this kernel on a Toshiba
e800 family PDA.
+config TRIZEPS_PXA
+ bool "PXA based Keith und Koep Trizeps DIMM-Modules"
+
+config MACH_H5000
+ bool "HP iPAQ h5000"
+ select PXA25x
+
config MACH_TRIZEPS4
bool "Keith und Koep Trizeps4 DIMM-Module"
+ depends on TRIZEPS_PXA
+ select TRIZEPS_PCMCIA
+ select PXA27x
+
+config MACH_TRIZEPS4WL
+ bool "Keith und Koep Trizeps4-WL DIMM-Module"
+ depends on TRIZEPS_PXA
+ select TRIZEPS_PCMCIA
select PXA27x
+ select PXA_SSP
+
+choice
+ prompt "Select base board for Trizeps module"
+ depends on TRIZEPS_PXA
-config MACH_TRIZEPS4_CONXS
+config MACH_TRIZEPS_CONXS
bool "ConXS Eval Board"
- depends on MACH_TRIZEPS4
+
+config MACH_TRIZEPS_UCONXS
+ bool "uConXS Eval Board"
+
+config MACH_TRIZEPS_ANY
+ bool "another Board"
+
+endchoice
+
+config TRIZEPS_PCMCIA
+ bool
+ help
+ Enable PCMCIA support for Trizeps modules
config MACH_EM_X270
bool "CompuLab EM-x270 platform"
select PXA27x
+config MACH_EXEDA
+ bool "CompuLab eXeda platform"
+ select PXA27x
+
config MACH_COLIBRI
- bool "Toradex Colibri PX27x"
+ bool "Toradex Colibri PXA270"
select PXA27x
+config MACH_COLIBRI300
+ bool "Toradex Colibri PXA300/310"
+ select PXA3xx
+ select CPU_PXA300
+
+config MACH_COLIBRI320
+ bool "Toradex Colibri PXA320"
+ select PXA3xx
+ select CPU_PXA320
+
config MACH_ZYLONITE
bool "PXA3xx Development Platform (aka Zylonite)"
select PXA3xx
+ select PXA_SSP
select HAVE_PWM
config MACH_LITTLETON
select PXA930
config MACH_ARMCORE
- bool "CompuLab CM-X270 modules"
+ bool "CompuLab CM-X255/CM-X270 modules"
select PXA27x
select IWMMXT
+ select PXA25x
+ select PXA_SSP
+
+config MACH_CM_X300
+ bool "CompuLab CM-X300 modules"
+ select PXA3xx
+ select CPU_PXA300
config MACH_MAGICIAN
bool "Enable HTC Magician Support"
select PXA27x
select IWMMXT
+ select PXA_SSP
+ select HAVE_PWM
select PXA_HAVE_BOARD_IRQS
+config MACH_HIMALAYA
+ bool "HTC Himalaya Support"
+ select CPU_PXA26x
+ select FB_W100
+
+config MACH_MIOA701
+ bool "Mitac Mio A701 Support"
+ select PXA27x
+ select IWMMXT
+ select HAVE_PWM
+ select GPIO_SYSFS
+ help
+ Say Y here if you intend to run this kernel on a
+ MIO A701. Currently there is only basic support
+ for this PDA.
+
config MACH_PCM027
bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
select PXA27x
bool "PXA based Palm PDAs"
select HAVE_PWM
+config MACH_PALMTE2
+ bool "Palm Tungsten|E2"
+ default y
+ depends on ARCH_PXA_PALM
+ select PXA25x
+ help
+ Say Y here if you intend to run this kernel on a Palm Tungsten|E2
+ handheld computer.
+
+config MACH_PALMT5
+ bool "Palm Tungsten|T5"
+ default y
+ depends on ARCH_PXA_PALM
+ select PXA27x
+ select IWMMXT
+ help
+ Say Y here if you intend to run this kernel on a Palm Tungsten|T5
+ handheld computer.
+
config MACH_PALMTX
bool "Palm T|X"
default y
Say Y here if you intend to run this kernel on a Palm T|X
handheld computer.
+config MACH_PALMZ72
+ bool "Palm Zire 72"
+ default y
+ depends on ARCH_PXA_PALM
+ select PXA27x
+ select IWMMXT
+ help
+ Say Y here if you intend to run this kernel on Palm Zire 72
+ handheld computer.
+
+config MACH_PALMLD
+ bool "Palm LifeDrive"
+ default y
+ depends on ARCH_PXA_PALM
+ select PXA27x
+ select IWMMXT
+ help
+ Say Y here if you intend to run this kernel on a Palm LifeDrive
+ handheld computer.
+
config MACH_PCM990_BASEBOARD
bool "PHYTEC PCM-990 development board"
select HAVE_PWM
endchoice
+config MACH_CSB726
+ bool "Enable Cogent CSB726 System On a Module"
+ select PXA27x
+ select IWMMXT
+ help
+ Say Y here if you intend to run this kernel on a Cogent
+ CSB726 System On Module.
+
+config CSB726_CSB701
+ bool "Enable supprot for CSB701 baseboard"
+ depends on MACH_CSB726
config PXA_EZX
bool "Motorola EZX Platform"
config PXA25x
bool
+ select CPU_XSCALE
help
Select code specific to PXA21x/25x/26x variants
config PXA27x
bool
+ select CPU_XSCALE
help
Select code specific to PXA27x variants
+config CPU_PXA26x
+ bool
+ select PXA25x
+ help
+ Select code specific to PXA26x (codename Dalhart)
+
config PXA3xx
bool
+ select CPU_XSC3
help
Select code specific to PXA3xx variants
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff