#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
#include <linux/delay.h>
+#include <linux/i2c/twl.h>
#include <linux/err.h>
#include <linux/clk.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
#include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/board.h>
-#include <mach/common.h>
-#include <mach/gpmc.h>
+#include <plat/mux.h>
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/gpmc.h>
+#include <plat/usb.h>
+#include <plat/gpmc-smc91x.h>
-#include <asm/io.h>
+#include "hsmmc.h"
-
-#define SDP2430_FLASH_CS 0
-#define SDP2430_SMC91X_CS 5
+#define SDP2430_CS0_BASE 0x04000000
+#define SECONDARY_LCD_GPIO 147
static struct mtd_partition sdp2430_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */
}
};
-static struct flash_platform_data sdp2430_flash_data = {
- .map_name = "cfi_probe",
+static struct physmap_flash_data sdp2430_flash_data = {
.width = 2,
.parts = sdp2430_partitions,
.nr_parts = ARRAY_SIZE(sdp2430_partitions),
};
static struct platform_device sdp2430_flash_device = {
- .name = "omapflash",
+ .name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &sdp2430_flash_data,
.resource = &sdp2430_flash_resource,
};
-static struct resource sdp2430_smc91x_resources[] = {
- [0] = {
- .start = SDP2430_CS0_BASE,
- .end = SDP2430_CS0_BASE + SZ_64M - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
- .end = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
- },
-};
-
-static struct platform_device sdp2430_smc91x_device = {
- .name = "smc91x",
+static struct platform_device sdp2430_lcd_device = {
+ .name = "sdp2430_lcd",
.id = -1,
- .num_resources = ARRAY_SIZE(sdp2430_smc91x_resources),
- .resource = sdp2430_smc91x_resources,
};
static struct platform_device *sdp2430_devices[] __initdata = {
- &sdp2430_smc91x_device,
&sdp2430_flash_device,
+ &sdp2430_lcd_device,
};
-static inline void __init sdp2430_init_smc91x(void)
-{
- int eth_cs;
- unsigned long cs_mem_base;
- unsigned int rate;
- struct clk *gpmc_fck;
+static struct omap_lcd_config sdp2430_lcd_config __initdata = {
+ .ctrl_name = "internal",
+};
- eth_cs = SDP2430_SMC91X_CS;
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE)
- gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */
- if (IS_ERR(gpmc_fck)) {
- WARN_ON(1);
- return;
- }
+static struct omap_smc91x_platform_data board_smc91x_data = {
+ .cs = 5,
+ .gpio_irq = 149,
+ .flags = GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 |
+ IORESOURCE_IRQ_LOWLEVEL,
- clk_enable(gpmc_fck);
- rate = clk_get_rate(gpmc_fck);
-
- /* Make sure CS1 timings are correct, for 2430 always muxed */
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1, 0x00011200);
-
- if (rate >= 160000000) {
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
- } else if (rate >= 130000000) {
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
- } else { /* rate = 100000000 */
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2);
- }
+};
- if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
- printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
- goto out;
- }
+static void __init board_smc91x_init(void)
+{
+ if (omap_rev() > OMAP3430_REV_ES1_0)
+ board_smc91x_data.gpio_irq = 6;
+ else
+ board_smc91x_data.gpio_irq = 29;
- sdp2430_smc91x_resources[0].start = cs_mem_base + 0x300;
- sdp2430_smc91x_resources[0].end = cs_mem_base + 0x30f;
- udelay(100);
+ gpmc_smc91x_init(&board_smc91x_data);
+}
- if (omap_request_gpio(OMAP24XX_ETHR_GPIO_IRQ) < 0) {
- printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
- OMAP24XX_ETHR_GPIO_IRQ);
- gpmc_cs_free(eth_cs);
- goto out;
- }
- omap_set_gpio_direction(OMAP24XX_ETHR_GPIO_IRQ, 1);
+#else
-out:
- clk_disable(gpmc_fck);
- clk_put(gpmc_fck);
+static inline void board_smc91x_init(void)
+{
}
+#endif
+
+static struct omap_board_config_kernel sdp2430_config[] = {
+ {OMAP_TAG_LCD, &sdp2430_lcd_config},
+};
+
static void __init omap_2430sdp_init_irq(void)
{
- omap2_init_common_hw();
+ omap_board_config = sdp2430_config;
+ omap_board_config_size = ARRAY_SIZE(sdp2430_config);
+ omap2_init_common_hw(NULL, NULL);
omap_init_irq();
omap_gpio_init();
- sdp2430_init_smc91x();
}
-static struct omap_uart_config sdp2430_uart_config __initdata = {
- .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+static struct twl4030_gpio_platform_data sdp2430_gpio_data = {
+ .gpio_base = OMAP_MAX_GPIO_LINES,
+ .irq_base = TWL4030_GPIO_IRQ_BASE,
+ .irq_end = TWL4030_GPIO_IRQ_END,
};
-static struct omap_board_config_kernel sdp2430_config[] = {
- {OMAP_TAG_UART, &sdp2430_uart_config},
+static struct twl4030_platform_data sdp2430_twldata = {
+ .irq_base = TWL4030_IRQ_BASE,
+ .irq_end = TWL4030_IRQ_END,
+
+ /* platform_data for children goes here */
+ .gpio = &sdp2430_gpio_data,
+};
+
+static struct i2c_board_info __initdata sdp2430_i2c_boardinfo[] = {
+ {
+ I2C_BOARD_INFO("twl4030", 0x48),
+ .flags = I2C_CLIENT_WAKE,
+ .irq = INT_24XX_SYS_NIRQ,
+ .platform_data = &sdp2430_twldata,
+ },
+};
+
+static int __init omap2430_i2c_init(void)
+{
+ omap_register_i2c_bus(1, 400, NULL, 0);
+ omap_register_i2c_bus(2, 2600, sdp2430_i2c_boardinfo,
+ ARRAY_SIZE(sdp2430_i2c_boardinfo));
+ return 0;
+}
+
+static struct omap2_hsmmc_info mmc[] __initdata = {
+ {
+ .mmc = 1,
+ .wires = 4,
+ .gpio_cd = -EINVAL,
+ .gpio_wp = -EINVAL,
+ .ext_clock = 1,
+ },
+ {} /* Terminator */
+};
+
+static struct omap_musb_board_data musb_board_data = {
+ .interface_type = MUSB_INTERFACE_ULPI,
+ .mode = MUSB_OTG,
+ .power = 100,
};
static void __init omap_2430sdp_init(void)
{
+ int ret;
+
+ omap2430_i2c_init();
+
platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
- omap_board_config = sdp2430_config;
- omap_board_config_size = ARRAY_SIZE(sdp2430_config);
omap_serial_init();
+ omap2_hsmmc_init(mmc);
+ usb_musb_init(&musb_board_data);
+ board_smc91x_init();
+
+ /* Turn off secondary LCD backlight */
+ ret = gpio_request(SECONDARY_LCD_GPIO, "Secondary LCD backlight");
+ if (ret == 0)
+ gpio_direction_output(SECONDARY_LCD_GPIO, 0);
}
static void __init omap_2430sdp_map_io(void)
{
omap2_set_globals_243x();
- omap2_map_common_io();
+ omap243x_map_common_io();
}
MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
/* Maintainer: Syed Khasim - Texas Instruments Inc */
.phys_io = 0x48000000,
- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
+ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = omap_2430sdp_map_io,
.init_irq = omap_2430sdp_init_irq,
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff