iwl3945: calculate debugfs isr statistics

[safe/jmp/linux-2.6] / arch / arm / mach-omap1 / io.c

diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 79fb865..3afe540 100644 (file)
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -8,18 +8,20 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/io.h>
 
+#include <asm/tlb.h>
 #include <asm/mach/map.h>
-#include <asm/io.h>
-#include <asm/arch/tc.h>
+#include <mach/mux.h>
+#include <mach/tc.h>
 
-extern int clk_init(void);
+extern int omap1_clk_init(void);
 extern void omap_check_revision(void);
 extern void omap_sram_init(void);
+extern void omapfb_reserve_sdram(void);
 
 /*
  * The machine specific code may provide the extra mapping besides the
@@ -50,7 +52,23 @@ static struct map_desc omap730_io_desc[] __initdata = {
 };
 #endif
 
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP850
+static struct map_desc omap850_io_desc[] __initdata = {
+       {
+               .virtual        = OMAP850_DSP_BASE,
+               .pfn            = __phys_to_pfn(OMAP850_DSP_START),
+               .length         = OMAP850_DSP_SIZE,
+               .type           = MT_DEVICE
+       }, {
+               .virtual        = OMAP850_DSPREG_BASE,
+               .pfn            = __phys_to_pfn(OMAP850_DSPREG_START),
+               .length         = OMAP850_DSPREG_SIZE,
+               .type           = MT_DEVICE
+       }
+};
+#endif
+
+#ifdef CONFIG_ARCH_OMAP15XX
 static struct map_desc omap1510_io_desc[] __initdata = {
        {
                .virtual        = OMAP1510_DSP_BASE,
@@ -82,15 +100,24 @@ static struct map_desc omap16xx_io_desc[] __initdata = {
 };
 #endif
 
-static int initialized = 0;
-
-static void __init _omap_map_io(void)
+/*
+ * Maps common IO regions for omap1. This should only get called from
+ * board specific init.
+ */
+void __init omap1_map_common_io(void)
 {
-       initialized = 1;
-
-       /* We have to initialize the IO space mapping before we can run
-        * cpu_is_omapxxx() macros. */
        iotable_init(omap_io_desc, ARRAY_SIZE(omap_io_desc));
+
+       /* Normally devicemaps_init() would flush caches and tlb after
+        * mdesc->map_io(), but we must also do it here because of the CPU
+        * revision check below.
+        */
+       local_flush_tlb_all();
+       flush_cache_all();
+
+       /* We want to check CPU revision early for cpu_is_omapxxxx() macros.
+        * IO space mapping must be initialized before we can do that.
+        */
        omap_check_revision();
 
 #ifdef CONFIG_ARCH_OMAP730
@@ -98,8 +125,15 @@ static void __init _omap_map_io(void)
                iotable_init(omap730_io_desc, ARRAY_SIZE(omap730_io_desc));
        }
 #endif
-#ifdef CONFIG_ARCH_OMAP1510
-       if (cpu_is_omap1510()) {
+
+#ifdef CONFIG_ARCH_OMAP850
+       if (cpu_is_omap850()) {
+               iotable_init(omap850_io_desc, ARRAY_SIZE(omap850_io_desc));
+       }
+#endif
+
+#ifdef CONFIG_ARCH_OMAP15XX
+       if (cpu_is_omap15xx()) {
                iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc));
        }
 #endif
@@ -110,7 +144,15 @@ static void __init _omap_map_io(void)
 #endif
 
        omap_sram_init();
+       omapfb_reserve_sdram();
+}
 
+/*
+ * Common low-level hardware init for omap1. This should only get called from
+ * board specific init.
+ */
+void __init omap1_init_common_hw(void)
+{
        /* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort
         * on a Posted Write in the TIPB Bridge".
         */
@@ -119,15 +161,8 @@ static void __init _omap_map_io(void)
 
        /* Must init clocks early to assure that timer interrupt works
         */
-       clk_init();
-}
+       omap1_clk_init();
 
-/*
- * This should only get called from board specific init
- */
-void __init omap_map_common_io(void)
-{
-       if (!initialized)
-               _omap_map_io();
+       omap1_mux_init();
 }