* published by the Free Software Foundation.
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/io.h>
+#include <asm/tlb.h>
#include <asm/mach/map.h>
-#include <asm/io.h>
-#include <asm/arch/tc.h>
+#include <mach/mux.h>
+#include <mach/tc.h>
-extern int clk_init(void);
+extern int omap1_clk_init(void);
extern void omap_check_revision(void);
+extern void omap_sram_init(void);
+extern void omapfb_reserve_sdram(void);
/*
* The machine specific code may provide the extra mapping besides the
* default mapping provided here.
*/
static struct map_desc omap_io_desc[] __initdata = {
- { IO_VIRT, IO_PHYS, IO_SIZE, MT_DEVICE },
+ {
+ .virtual = IO_VIRT,
+ .pfn = __phys_to_pfn(IO_PHYS),
+ .length = IO_SIZE,
+ .type = MT_DEVICE
+ }
};
#ifdef CONFIG_ARCH_OMAP730
static struct map_desc omap730_io_desc[] __initdata = {
- { OMAP730_DSP_BASE, OMAP730_DSP_START, OMAP730_DSP_SIZE, MT_DEVICE },
- { OMAP730_DSPREG_BASE, OMAP730_DSPREG_START, OMAP730_DSPREG_SIZE, MT_DEVICE },
- { OMAP730_SRAM_BASE, OMAP730_SRAM_START, OMAP730_SRAM_SIZE, MT_DEVICE }
+ {
+ .virtual = OMAP730_DSP_BASE,
+ .pfn = __phys_to_pfn(OMAP730_DSP_START),
+ .length = OMAP730_DSP_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = OMAP730_DSPREG_BASE,
+ .pfn = __phys_to_pfn(OMAP730_DSPREG_START),
+ .length = OMAP730_DSPREG_SIZE,
+ .type = MT_DEVICE
+ }
};
#endif
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP850
+static struct map_desc omap850_io_desc[] __initdata = {
+ {
+ .virtual = OMAP850_DSP_BASE,
+ .pfn = __phys_to_pfn(OMAP850_DSP_START),
+ .length = OMAP850_DSP_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = OMAP850_DSPREG_BASE,
+ .pfn = __phys_to_pfn(OMAP850_DSPREG_START),
+ .length = OMAP850_DSPREG_SIZE,
+ .type = MT_DEVICE
+ }
+};
+#endif
+
+#ifdef CONFIG_ARCH_OMAP15XX
static struct map_desc omap1510_io_desc[] __initdata = {
- { OMAP1510_DSP_BASE, OMAP1510_DSP_START, OMAP1510_DSP_SIZE, MT_DEVICE },
- { OMAP1510_DSPREG_BASE, OMAP1510_DSPREG_START, OMAP1510_DSPREG_SIZE, MT_DEVICE },
- { OMAP1510_SRAM_BASE, OMAP1510_SRAM_START, OMAP1510_SRAM_SIZE, MT_DEVICE }
+ {
+ .virtual = OMAP1510_DSP_BASE,
+ .pfn = __phys_to_pfn(OMAP1510_DSP_START),
+ .length = OMAP1510_DSP_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = OMAP1510_DSPREG_BASE,
+ .pfn = __phys_to_pfn(OMAP1510_DSPREG_START),
+ .length = OMAP1510_DSPREG_SIZE,
+ .type = MT_DEVICE
+ }
};
#endif
#if defined(CONFIG_ARCH_OMAP16XX)
-static struct map_desc omap1610_io_desc[] __initdata = {
- { OMAP16XX_DSP_BASE, OMAP16XX_DSP_START, OMAP16XX_DSP_SIZE, MT_DEVICE },
- { OMAP16XX_DSPREG_BASE, OMAP16XX_DSPREG_START, OMAP16XX_DSPREG_SIZE, MT_DEVICE },
- { OMAP16XX_SRAM_BASE, OMAP16XX_SRAM_START, OMAP1610_SRAM_SIZE, MT_DEVICE }
+static struct map_desc omap16xx_io_desc[] __initdata = {
+ {
+ .virtual = OMAP16XX_DSP_BASE,
+ .pfn = __phys_to_pfn(OMAP16XX_DSP_START),
+ .length = OMAP16XX_DSP_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = OMAP16XX_DSPREG_BASE,
+ .pfn = __phys_to_pfn(OMAP16XX_DSPREG_START),
+ .length = OMAP16XX_DSPREG_SIZE,
+ .type = MT_DEVICE
+ }
};
+#endif
-static struct map_desc omap5912_io_desc[] __initdata = {
- { OMAP16XX_DSP_BASE, OMAP16XX_DSP_START, OMAP16XX_DSP_SIZE, MT_DEVICE },
- { OMAP16XX_DSPREG_BASE, OMAP16XX_DSPREG_START, OMAP16XX_DSPREG_SIZE, MT_DEVICE },
/*
- * The OMAP5912 has 250kByte internal SRAM. Because the mapping is baseed on page
- * size (4kByte), it seems that the last 2kByte (=0x800) of the 250kByte are not mapped.
- * Add additional 2kByte (0x800) so that the last page is mapped and the last 2kByte
- * can be used.
+ * Maps common IO regions for omap1. This should only get called from
+ * board specific init.
*/
- { OMAP16XX_SRAM_BASE, OMAP16XX_SRAM_START, OMAP5912_SRAM_SIZE + 0x800, MT_DEVICE }
-};
-#endif
-
-static int initialized = 0;
-
-static void __init _omap_map_io(void)
+void __init omap1_map_common_io(void)
{
- initialized = 1;
-
- /* We have to initialize the IO space mapping before we can run
- * cpu_is_omapxxx() macros. */
iotable_init(omap_io_desc, ARRAY_SIZE(omap_io_desc));
+
+ /* Normally devicemaps_init() would flush caches and tlb after
+ * mdesc->map_io(), but we must also do it here because of the CPU
+ * revision check below.
+ */
+ local_flush_tlb_all();
+ flush_cache_all();
+
+ /* We want to check CPU revision early for cpu_is_omapxxxx() macros.
+ * IO space mapping must be initialized before we can do that.
+ */
omap_check_revision();
#ifdef CONFIG_ARCH_OMAP730
iotable_init(omap730_io_desc, ARRAY_SIZE(omap730_io_desc));
}
#endif
-#ifdef CONFIG_ARCH_OMAP1510
- if (cpu_is_omap1510()) {
+
+#ifdef CONFIG_ARCH_OMAP850
+ if (cpu_is_omap850()) {
+ iotable_init(omap850_io_desc, ARRAY_SIZE(omap850_io_desc));
+ }
+#endif
+
+#ifdef CONFIG_ARCH_OMAP15XX
+ if (cpu_is_omap15xx()) {
iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc));
}
#endif
#if defined(CONFIG_ARCH_OMAP16XX)
- if (cpu_is_omap1610() || cpu_is_omap1710()) {
- iotable_init(omap1610_io_desc, ARRAY_SIZE(omap1610_io_desc));
- }
- if (cpu_is_omap5912()) {
- iotable_init(omap5912_io_desc, ARRAY_SIZE(omap5912_io_desc));
+ if (cpu_is_omap16xx()) {
+ iotable_init(omap16xx_io_desc, ARRAY_SIZE(omap16xx_io_desc));
}
#endif
+ omap_sram_init();
+ omapfb_reserve_sdram();
+}
+
+/*
+ * Common low-level hardware init for omap1. This should only get called from
+ * board specific init.
+ */
+void __init omap1_init_common_hw(void)
+{
/* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort
* on a Posted Write in the TIPB Bridge".
*/
/* Must init clocks early to assure that timer interrupt works
*/
- clk_init();
-}
+ omap1_clk_init();
-/*
- * This should only get called from board specific init
- */
-void omap_map_common_io(void)
-{
- if (!initialized)
- _omap_map_io();
+ omap1_mux_init();
}
+
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff