#include <linux/tty.h>
#include <linux/serial_8250.h>
#include <linux/slab.h>
-
#include <asm/types.h>
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
-#include <mach/gtwx5715.h>
+
+/* GPIO 5,6,7 and 12 are hard wired to the Kendin KS8995M Switch
+ and operate as an SPI type interface. The details of the interface
+ are available on Kendin/Micrel's web site. */
+
+#define GTWX5715_KSSPI_SELECT 5
+#define GTWX5715_KSSPI_TXD 6
+#define GTWX5715_KSSPI_CLOCK 7
+#define GTWX5715_KSSPI_RXD 12
+
+/* The "reset" button is wired to GPIO 3.
+ The GPIO is brought "low" when the button is pushed. */
+
+#define GTWX5715_BUTTON_GPIO 3
+
+/* Board Label Front Label
+ LED1 Power
+ LED2 Wireless-G
+ LED3 not populated but could be
+ LED4 Internet
+ LED5 - LED8 Controlled by KS8995M Switch
+ LED9 DMZ */
+
+#define GTWX5715_LED1_GPIO 2
+#define GTWX5715_LED2_GPIO 9
+#define GTWX5715_LED3_GPIO 8
+#define GTWX5715_LED4_GPIO 1
+#define GTWX5715_LED9_GPIO 4
/*
* Xscale UART registers are 32 bits wide with only the least