drm/radeon/kms: fix macbookpro connector quirk

[safe/jmp/linux-2.6] / arch / arm / mach-at91 / board-dk.c

diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-dk.c
index 6043c38..0fd0f5b 100644 (file)
--- a/arch/arm/mach-at91/board-dk.c
+++ b/arch/arm/mach-at91/board-dk.c
@@ -29,7 +29,6 @@
 #include <linux/spi/spi.h>
 #include <linux/mtd/physmap.h>
 
-#include <asm/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -38,24 +37,14 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200_mc.h>
 
 #include "generic.h"
 
 
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- */
-static struct at91_uart_config __initdata dk_uart_config = {
-       .console_tty    = 0,                            /* ttyS0 */
-       .nr_tty         = 2,
-       .tty_map        = { 4, 1, -1, -1, -1 }          /* ttyS0, ..., ttyS4 */
-};
-
 static void __init dk_map_io(void)
 {
        /* Initialize processor: 18.432 MHz crystal */
@@ -64,8 +53,16 @@ static void __init dk_map_io(void)
        /* Setup the LEDs */
        at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
 
-       /* Setup the serial ports and console */
-       at91_init_serial(&dk_uart_config);
+       /* DBGU on ttyS0. (Rx & Tx only) */
+       at91_register_uart(0, 0, 0);
+
+       /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+       at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+                          | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+                          | ATMEL_UART_RI);
+
+       /* set serial console to ttyS0 (ie, DBGU) */
+       at91_set_serial_console(0);
 }
 
 static void __init dk_init_irq(void)
@@ -124,6 +121,18 @@ static struct spi_board_info dk_spi_devices[] = {
 #endif
 };
 
+static struct i2c_board_info __initdata dk_i2c_devices[] = {
+       {
+               I2C_BOARD_INFO("ics1523", 0x26),
+       },
+       {
+               I2C_BOARD_INFO("x9429", 0x28),
+       },
+       {
+               I2C_BOARD_INFO("24c1024", 0x50),
+       }
+};
+
 static struct mtd_partition __initdata dk_nand_partition[] = {
        {
                .name   = "NAND Partition 1",
@@ -132,13 +141,13 @@ static struct mtd_partition __initdata dk_nand_partition[] = {
        },
 };
 
-static struct mtd_partition *nand_partitions(int size, int *num_partitions)
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
 {
        *num_partitions = ARRAY_SIZE(dk_nand_partition);
        return dk_nand_partition;
 }
 
-static struct at91_nand_data __initdata dk_nand_data = {
+static struct atmel_nand_data __initdata dk_nand_data = {
        .ale            = 22,
        .cle            = 21,
        .det_pin        = AT91_PIN_PB1,
@@ -148,10 +157,10 @@ static struct at91_nand_data __initdata dk_nand_data = {
 };
 
 #define DK_FLASH_BASE  AT91_CHIPSELECT_0
-#define DK_FLASH_SIZE  0x200000
+#define DK_FLASH_SIZE  SZ_2M
 
 static struct physmap_flash_data dk_flash_data = {
-       .width  = 2,
+       .width          = 2,
 };
 
 static struct resource dk_flash_resource = {
@@ -170,6 +179,14 @@ static struct platform_device dk_flash = {
        .num_resources  = 1,
 };
 
+static struct gpio_led dk_leds[] = {
+       {
+               .name                   = "led0",
+               .gpio                   = AT91_PIN_PB2,
+               .active_low             = 1,
+               .default_trigger        = "heartbeat",
+       }
+};
 
 static void __init dk_board_init(void)
 {
@@ -185,7 +202,7 @@ static void __init dk_board_init(void)
        /* Compact Flash */
        at91_add_device_cf(&dk_cf_data);
        /* I2C */
-       at91_add_device_i2c();
+       at91_add_device_i2c(dk_i2c_devices, ARRAY_SIZE(dk_i2c_devices));
        /* SPI */
        at91_add_device_spi(dk_spi_devices, ARRAY_SIZE(dk_spi_devices));
 #ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
@@ -200,6 +217,8 @@ static void __init dk_board_init(void)
        at91_add_device_nand(&dk_nand_data);
        /* NOR Flash */
        platform_device_register(&dk_flash);
+       /* LEDs */
+       at91_gpio_leds(dk_leds, ARRAY_SIZE(dk_leds));
        /* VGA */
 //     dk_add_device_video();
 }