#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
#include <linux/device.h>
#include <linux/init.h>
#include <linux/mutex.h>
+#include <linux/kthread.h>
+#include <linux/io.h>
#include <asm/dma.h>
#include <asm/ecard.h>
-#include <asm/hardware.h>
-#include <asm/io.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mmu_context.h>
#include <asm/mach/irq.h>
#include <asm/tlbflush.h>
+#include "ecard.h"
+
#ifndef CONFIG_ARCH_RPC
#define HAVE_EXPMASK
#endif
res = ec->slot_no == 8
? &ec->resource[ECARD_RES_MEMC]
- : ec->type == ECARD_EASI
+ : ec->easi
? &ec->resource[ECARD_RES_EASI]
: &ec->resource[ECARD_RES_IOCSYNC];
index += 1;
}
} else {
- unsigned long base = (ec->type == ECARD_EASI
+ unsigned long base = (ec->easi
? &ec->resource[ECARD_RES_EASI]
: &ec->resource[ECARD_RES_IOCSYNC])->start;
void __iomem *pbase = (void __iomem *)base;
static int
ecard_task(void * unused)
{
- daemonize("kecardd");
-
/*
* Allocate a mm. We're not a lazy-TLB kernel task since we need
* to set page table entries where the user space would be. Note
}
if (c_id(&excd) == 0x80) { /* loader */
if (!ec->loader) {
- ec->loader = (loader_t)kmalloc(c_len(&excd),
+ ec->loader = kmalloc(c_len(&excd),
GFP_KERNEL);
if (ec->loader)
ecard_readbytes(ec->loader, ec,
pending = ecard_default_ops.irqpending(ec);
if (pending) {
- struct irq_desc *d = irq_desc + ec->irq;
- desc_handle_irq(ec->irq, d);
+ generic_handle_irq(ec->irq);
called ++;
}
}
ecard_t *ec = slot_to_ecard(slot);
if (ec->claimed) {
- struct irq_desc *d = irq_desc + ec->irq;
/*
* this ugly code is so that we can operate a
* prioritorising system:
* Serial cards should go in 0/1, ethernet/scsi in 2/3
* otherwise you will lose serial data at high speeds!
*/
- desc_handle_irq(ec->irq, d);
+ generic_handle_irq(ec->irq);
} else {
printk(KERN_WARNING "card%d: interrupt from unclaimed "
"card???\n", slot);
#define IO_EC_MEMC8_BASE 0
#endif
-unsigned int __ecard_address(ecard_t *ec, card_type_t type, card_speed_t speed)
+static unsigned int __ecard_address(ecard_t *ec, card_type_t type, card_speed_t speed)
{
unsigned long address = 0;
int slot = ec->slot_no;
return address;
}
-static int ecard_prints(char *buffer, ecard_t *ec)
+static int ecard_prints(struct seq_file *m, ecard_t *ec)
{
- char *start = buffer;
-
- buffer += sprintf(buffer, " %d: %s ", ec->slot_no,
- ec->type == ECARD_EASI ? "EASI" : " ");
+ seq_printf(m, " %d: %s ", ec->slot_no, ec->easi ? "EASI" : " ");
if (ec->cid.id == 0) {
struct in_chunk_dir incd;
- buffer += sprintf(buffer, "[%04X:%04X] ",
+ seq_printf(m, "[%04X:%04X] ",
ec->cid.manufacturer, ec->cid.product);
if (!ec->card_desc && ec->cid.cd &&
strcpy((char *)ec->card_desc, incd.d.string);
}
- buffer += sprintf(buffer, "%s\n", ec->card_desc ? ec->card_desc : "*unknown*");
+ seq_printf(m, "%s\n", ec->card_desc ? ec->card_desc : "*unknown*");
} else
- buffer += sprintf(buffer, "Simple card %d\n", ec->cid.id);
+ seq_printf(m, "Simple card %d\n", ec->cid.id);
- return buffer - start;
+ return 0;
}
-static int get_ecard_dev_info(char *buf, char **start, off_t pos, int count)
+static int ecard_devices_proc_show(struct seq_file *m, void *v)
{
ecard_t *ec = cards;
- off_t at = 0;
- int len, cnt;
-
- cnt = 0;
- while (ec && count > cnt) {
- len = ecard_prints(buf, ec);
- at += len;
- if (at >= pos) {
- if (!*start) {
- *start = buf + (pos - (at - len));
- cnt = at - pos;
- } else
- cnt += len;
- buf += len;
- }
+
+ while (ec) {
+ ecard_prints(m, ec);
ec = ec->next;
}
- return (count > cnt) ? cnt : count;
+ return 0;
}
+static int ecard_devices_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ecard_devices_proc_show, NULL);
+}
+
+static const struct file_operations bus_ecard_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = ecard_devices_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
static struct proc_dir_entry *proc_bus_ecard_dir = NULL;
static void ecard_proc_init(void)
{
- proc_bus_ecard_dir = proc_mkdir("ecard", proc_bus);
- create_proc_info_entry("devices", 0, proc_bus_ecard_dir,
- get_ecard_dev_info);
+ proc_bus_ecard_dir = proc_mkdir("bus/ecard", NULL);
+ proc_create("devices", 0, proc_bus_ecard_dir, &bus_ecard_proc_fops);
}
#define ec_set_resource(ec,nr,st,sz) \
do { \
- (ec)->resource[nr].name = ec->dev.bus_id; \
+ (ec)->resource[nr].name = dev_name(&ec->dev); \
(ec)->resource[nr].start = st; \
(ec)->resource[nr].end = (st) + (sz) - 1; \
(ec)->resource[nr].flags = IORESOURCE_MEM; \
}
ec->slot_no = slot;
- ec->type = type;
+ ec->easi = type == ECARD_EASI;
ec->irq = NO_IRQ;
ec->fiq = NO_IRQ;
ec->dma = NO_DMA;
ec->ops = &ecard_default_ops;
- snprintf(ec->dev.bus_id, sizeof(ec->dev.bus_id), "ecard%d", slot);
+ dev_set_name(&ec->dev, "ecard%d", slot);
ec->dev.parent = NULL;
ec->dev.bus = &ecard_bus_type;
ec->dev.dma_mask = &ec->dma_mask;
ec->dma_mask = (u64)0xffffffff;
+ ec->dev.coherent_dma_mask = ec->dma_mask;
if (slot < 4) {
ec_set_resource(ec, ECARD_RES_MEMC,
for (i = 0; i < ECARD_NUM_RESOURCES; i++) {
if (ec->resource[i].flags &&
request_resource(&iomem_resource, &ec->resource[i])) {
- printk(KERN_ERR "%s: resource(s) not available\n",
- ec->dev.bus_id);
+ dev_err(&ec->dev, "resource(s) not available\n");
ec->resource[i].end -= ec->resource[i].start;
ec->resource[i].start = 0;
ec->resource[i].flags = 0;
static ssize_t ecard_show_type(struct device *dev, struct device_attribute *attr, char *buf)
{
struct expansion_card *ec = ECARD_DEV(dev);
- return sprintf(buf, "%s\n", ec->type == ECARD_EASI ? "EASI" : "IOC");
+ return sprintf(buf, "%s\n", ec->easi ? "EASI" : "IOC");
}
static struct device_attribute ecard_dev_attrs[] = {
}
EXPORT_SYMBOL(ecard_release_resources);
+void ecard_setirq(struct expansion_card *ec, const struct expansion_card_ops *ops, void *irq_data)
+{
+ ec->irq_data = irq_data;
+ barrier();
+ ec->ops = ops;
+}
+EXPORT_SYMBOL(ecard_setirq);
+
+void __iomem *ecardm_iomap(struct expansion_card *ec, unsigned int res,
+ unsigned long offset, unsigned long maxsize)
+{
+ unsigned long start = ecard_resource_start(ec, res);
+ unsigned long end = ecard_resource_end(ec, res);
+
+ if (offset > (end - start))
+ return NULL;
+
+ start += offset;
+ if (maxsize && end - start > maxsize)
+ end = start + maxsize;
+
+ return devm_ioremap(&ec->dev, start, end - start);
+}
+EXPORT_SYMBOL(ecardm_iomap);
+
/*
* Probe for an expansion card.
*
}
rc = -ENODEV;
- if ((ec->podaddr = ecard_address(ec, type, ECARD_SYNC)) == 0)
+ if ((ec->podaddr = __ecard_address(ec, type, ECARD_SYNC)) == 0)
goto nodev;
cid.r_zero = 1;
ec->fiqmask = 4;
}
- for (i = 0; i < sizeof(blacklist) / sizeof(*blacklist); i++)
+ for (i = 0; i < ARRAY_SIZE(blacklist); i++)
if (blacklist[i].manufacturer == ec->cid.manufacturer &&
blacklist[i].product == ec->cid.product) {
ec->card_desc = blacklist[i].type;
*/
static int __init ecard_init(void)
{
- int slot, irqhw, ret;
-
- ret = kernel_thread(ecard_task, NULL, CLONE_KERNEL);
- if (ret < 0) {
- printk(KERN_ERR "Ecard: unable to create kernel thread: %d\n",
- ret);
- return ret;
+ struct task_struct *task;
+ int slot, irqhw;
+
+ task = kthread_run(ecard_task, NULL, "kecardd");
+ if (IS_ERR(task)) {
+ printk(KERN_ERR "Ecard: unable to create kernel thread: %ld\n",
+ PTR_ERR(task));
+ return PTR_ERR(task);
}
printk("Probing expansion cards\n");
id = ecard_match_device(drv->id_table, ec);
- ecard_claim(ec);
+ ec->claimed = 1;
ret = drv->probe(ec, id);
if (ret)
- ecard_release(ec);
+ ec->claimed = 0;
return ret;
}
struct ecard_driver *drv = ECARD_DRV(dev->driver);
drv->remove(ec);
- ecard_release(ec);
+ ec->claimed = 0;
+
+ /*
+ * Restore the default operations. We ensure that the
+ * ops are set before we change the data.
+ */
+ ec->ops = &ecard_default_ops;
+ barrier();
+ ec->irq_data = NULL;
return 0;
}
if (dev->driver) {
if (drv->shutdown)
drv->shutdown(ec);
- ecard_release(ec);
+ ec->claimed = 0;
}
/*
postcore_initcall(ecard_bus_init);
EXPORT_SYMBOL(ecard_readchunk);
-EXPORT_SYMBOL(__ecard_address);
EXPORT_SYMBOL(ecard_register_driver);
EXPORT_SYMBOL(ecard_remove_driver);
EXPORT_SYMBOL(ecard_bus_type);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff