m68knommu: m5206e build fix

[safe/jmp/linux-2.6] / arch / arm / Kconfig

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a041997..dbfdf87 100644 (file)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -156,7 +156,6 @@ config ARCH_MTD_XIP
        bool
 
 config GENERIC_HARDIRQS_NO__DO_IRQ
-       bool
        def_bool y
 
 if OPROFILE
@@ -247,16 +246,6 @@ config ARCH_AT91
          This enables support for systems based on the Atmel AT91RM9200,
          AT91SAM9 and AT91CAP9 processors.
 
-config ARCH_CLPS7500
-       bool "Cirrus CL-PS7500FE"
-       select CPU_ARM710
-       select TIMER_ACORN
-       select ISA
-       select NO_IOPORT
-       select ARCH_SPARSEMEM_ENABLE
-       help
-         Support for the Cirrus Logic PS7500FE system-on-a-chip.
-
 config ARCH_CLPS711X
        bool "Cirrus Logic CLPS711x/EP721x-based"
        select CPU_ARM720T
@@ -281,6 +270,7 @@ config ARCH_EP93XX
        select ARM_VIC
        select GENERIC_GPIO
        select HAVE_CLK
+       select COMMON_CLKDEV
        select ARCH_REQUIRE_GPIOLIB
        help
          This enables support for the Cirrus EP93xx series of CPUs.
@@ -297,6 +287,8 @@ config ARCH_NETX
        bool "Hilscher NetX based"
        select CPU_ARM926T
        select ARM_VIC
+       select GENERIC_CLOCKEVENTS
+       select GENERIC_TIME
        help
          This enables support for systems based on the Hilscher NetX Soc
 
@@ -395,6 +387,7 @@ config ARCH_KIRKWOOD
        bool "Marvell Kirkwood"
        select CPU_FEROCEON
        select PCI
+       select GENERIC_GPIO
        select GENERIC_TIME
        select GENERIC_CLOCKEVENTS
        select PLAT_ORION
@@ -406,6 +399,7 @@ config ARCH_KS8695
        bool "Micrel/Kendin KS8695"
        select CPU_ARM922T
        select GENERIC_GPIO
+        select ARCH_REQUIRE_GPIOLIB
        help
          Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
          System-on-Chip devices.
@@ -436,6 +430,7 @@ config ARCH_MV78XX0
        bool "Marvell MV78xx0"
        select CPU_FEROCEON
        select PCI
+       select GENERIC_GPIO
        select GENERIC_TIME
        select GENERIC_CLOCKEVENTS
        select PLAT_ORION
@@ -526,6 +521,13 @@ config ARCH_S3C2410
          BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
          the Samsung SMDK2410 development board (and derivatives).
 
+config ARCH_S3C64XX
+       bool "Samsung S3C64XX"
+       select GENERIC_GPIO
+       select HAVE_CLK
+       help
+         Samsung S3C64XX series based systems
+
 config ARCH_SHARK
        bool "Shark"
        select CPU_SA110
@@ -581,6 +583,13 @@ config ARCH_MSM
          interface to the ARM9 modem processor which runs the baseband stack
          and controls some vital subsystems (clock and power control, etc).
 
+config ARCH_W90X900
+       bool "Nuvoton W90X900 CPU"
+       select CPU_ARM926T
+       help
+               Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
+               can login www.mcuos.com or www.nuvoton.com to know more.
+
 endchoice
 
 source "arch/arm/mach-clps711x/Kconfig"
@@ -622,6 +631,7 @@ source "arch/arm/mach-orion5x/Kconfig"
 source "arch/arm/mach-kirkwood/Kconfig"
 
 source "arch/arm/plat-s3c24xx/Kconfig"
+source "arch/arm/plat-s3c64xx/Kconfig"
 source "arch/arm/plat-s3c/Kconfig"
 
 if ARCH_S3C2410
@@ -633,6 +643,11 @@ source "arch/arm/mach-s3c2442/Kconfig"
 source "arch/arm/mach-s3c2443/Kconfig"
 endif
 
+if ARCH_S3C64XX
+source "arch/arm/mach-s3c6400/Kconfig"
+source "arch/arm/mach-s3c6410/Kconfig"
+endif
+
 source "arch/arm/mach-lh7a40x/Kconfig"
 
 source "arch/arm/mach-imx/Kconfig"
@@ -659,6 +674,8 @@ source "arch/arm/mach-ks8695/Kconfig"
 
 source "arch/arm/mach-msm/Kconfig"
 
+source "arch/arm/mach-w90x900/Kconfig"
+
 # Definitions to make life easier
 config ARCH_ACORN
        bool
@@ -813,7 +830,7 @@ config HOTPLUG_CPU
 
 config LOCAL_TIMERS
        bool "Use local timer interrupts"
-       depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP)
+       depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || REALVIEW_EB_A9MP)
        default y
        help
          Enable support for local timers on SMP platforms, rather then the
@@ -1308,6 +1325,8 @@ source "drivers/regulator/Kconfig"
 
 source "drivers/uio/Kconfig"
 
+source "drivers/staging/Kconfig"
+
 endmenu
 
 source "fs/Kconfig"