config SYS_SUPPORTS_APM_EMULATION
bool
+config GENERIC_GPIO
+ bool
+ default n
+
config GENERIC_TIME
bool
default n
+config GENERIC_CLOCKEVENTS
+ bool
+ default n
+
config MMU
bool
default y
bool
default y
+config STACKTRACE_SUPPORT
+ bool
+ default y
+
+config LOCKDEP_SUPPORT
+ bool
+ default y
+
config TRACE_IRQFLAGS_SUPPORT
bool
default y
bool
default y
-config GENERIC_BUST_SPINLOCK
- bool
-
config ARCH_MAY_HAVE_PC_FDC
bool
select ARM_AMBA
select ARM_VIC
select ICST307
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
help
This enables support for ARM Ltd Versatile board.
config ARCH_AT91
bool "Atmel AT91"
+ select GENERIC_GPIO
help
This enables support for systems based on the Atmel AT91RM9200
and AT91SAM9xxx processors.
config ARCH_EBSA110
bool "EBSA-110"
select ISA
+ select NO_IOPORT
help
This is an evaluation board for the StrongARM processor available
from Digital. It has limited hardware on-board, including an
config ARCH_IMX
bool "IMX"
+ select GENERIC_GPIO
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
help
Support for Motorola's i.MX family of processors (MX1, MXL).
+config ARCH_IOP13XX
+ bool "IOP13xx-based"
+ depends on MMU
+ select PLAT_IOP
+ select PCI
+ select ARCH_SUPPORTS_MSI
+ help
+ Support for Intel's IOP13XX (XScale) family of processors.
+
config ARCH_IOP32X
bool "IOP32x-based"
depends on MMU
help
Support for Intel's IOP33X (XScale) family of processors.
-config ARCH_IOP13XX
- bool "IOP13xx-based"
- depends on MMU
- select PLAT_IOP
- select PCI
- help
- Support for Intel's IOP13XX (XScale) family of processors.
-
-config ARCH_IXP4XX
- bool "IXP4xx-based"
+config ARCH_IXP23XX
+ bool "IXP23XX-based"
depends on MMU
- select GENERIC_TIME
+ select PCI
help
- Support for Intel's IXP4XX (XScale) family of processors.
+ Support for Intel's IXP23xx (XScale) family of processors.
config ARCH_IXP2000
bool "IXP2400/2800-based"
help
Support for Intel's IXP2400/2800 (XScale) family of processors.
-config ARCH_IXP23XX
- bool "IXP23XX-based"
+config ARCH_IXP4XX
+ bool "IXP4xx-based"
depends on MMU
- select PCI
+ select GENERIC_GPIO
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
help
- Support for Intel's IXP23xx (XScale) family of processors.
+ Support for Intel's IXP4XX (XScale) family of processors.
config ARCH_L7200
bool "LinkUp-L7200"
If you have any questions or comments about the Linux kernel port
to this board, send e-mail to <sjhill@cotw.com>.
+config ARCH_KS8695
+ bool "Micrel/Kendin KS8695"
+ select GENERIC_GPIO
+ help
+ Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
+ System-on-Chip devices.
+
config ARCH_NS9XXX
bool "NetSilicon NS9xxx"
help
<http://www.digi.com/products/microprocessors/index.jsp>
+config ARCH_MXC
+ bool "Freescale MXC/iMX-based"
+ select ARCH_MTD_XIP
+ help
+ Support for Freescale MXC/iMX-based family of processors
+
config ARCH_PNX4008
bool "Philips Nexperia PNX4008 Mobile"
help
bool "PXA2xx-based"
depends on MMU
select ARCH_MTD_XIP
+ select GENERIC_GPIO
select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
help
Support for Intel's PXA2XX processor line.
select ISA
select ARCH_DISCONTIGMEM_ENABLE
select ARCH_MTD_XIP
+ select GENERIC_GPIO
help
Support for StrongARM 11x0 based boards.
config ARCH_S3C2410
bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
+ select GENERIC_GPIO
help
Samsung S3C2410X CPU based systems, such as the Simtec Electronics
BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
core with a wide array of integrated devices for
hand-held and low-power applications.
+config ARCH_DAVINCI
+ bool "TI DaVinci"
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ select GENERIC_GPIO
+ help
+ Support for TI's DaVinci platform.
+
config ARCH_OMAP
bool "TI OMAP"
+ select GENERIC_GPIO
+ select GENERIC_TIME
help
Support for TI's OMAP platform (OMAP1 and OMAP2).
source "arch/arm/mach-omap2/Kconfig"
source "arch/arm/plat-s3c24xx/Kconfig"
+source "arch/arm/plat-s3c/Kconfig"
if ARCH_S3C2410
source "arch/arm/mach-s3c2400/Kconfig"
source "arch/arm/mach-at91/Kconfig"
+source "arch/arm/plat-mxc/Kconfig"
+
source "arch/arm/mach-netx/Kconfig"
source "arch/arm/mach-ns9xxx/Kconfig"
+source "arch/arm/mach-davinci/Kconfig"
+
+source "arch/arm/mach-ks8695/Kconfig"
+
# Definitions to make life easier
config ARCH_ACORN
bool
bool
config PCI
- bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX
+ bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
information about which PCI hardware does work under Linux and which
doesn't.
+config PCI_SYSCALL
+ def_bool PCI
+
# Select the host bridge type
config PCI_HOST_VIA82C505
bool
menu "Kernel Features"
+source "kernel/time/Kconfig"
+
config SMP
bool "Symmetric Multi-Processing (EXPERIMENTAL)"
depends on EXPERIMENTAL && REALVIEW_MPCORE
config NO_IDLE_HZ
bool "Dynamic tick timer"
+ depends on !GENERIC_CLOCKEVENTS
help
Select this option if you want to disable continuous timer ticks
and have them programmed to occur as required. This option saves
ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
- ARCH_AT91 || MACH_TRIZEPS4
+ ARCH_AT91 || MACH_TRIZEPS4 || ARCH_DAVINCI || \
+ ARCH_KS8695
help
If you say Y here, the LEDs on your machine will be used
to provide useful information about your current system status.
bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \
MACH_OMAP_H2 || MACH_OMAP_PERSEUS2
depends on LEDS
+ depends on !GENERIC_CLOCKEVENTS
default y if ARCH_EBSA110
help
If you say Y here, one of the system LEDs (the green one on the
source "drivers/block/Kconfig"
-source "drivers/acorn/block/Kconfig"
-
if PCMCIA || ARCH_CLPS7500 || ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX \
|| ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \
|| ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \
source "drivers/rtc/Kconfig"
+source "drivers/dma/Kconfig"
+
endmenu
source "fs/Kconfig"
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff