[POWERPC] Update arch/powerpc/boot/.gitignore

[safe/jmp/linux-2.6] / arch / arm / Kconfig

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ea45eef..b786e68 100644 (file)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -8,10 +8,12 @@ mainmenu "Linux Kernel Configuration"
 config ARM
        bool
        default y
+       select HAVE_IDE
        select RTC_LIB
        select SYS_SUPPORTS_APM_EMULATION
        select HAVE_OPROFILE
        select HAVE_KPROBES if (!XIP_KERNEL)
+       select HAVE_KRETPROBES if (HAVE_KPROBES)
        help
          The ARM series is a line of low-power-consumption RISC chip designs
          licensed by ARM Ltd and targeted at embedded applications and
@@ -35,6 +37,11 @@ config GENERIC_CLOCKEVENTS
        bool
        default n
 
+config GENERIC_CLOCKEVENTS_BROADCAST
+       bool
+       depends on GENERIC_CLOCKEVENTS
+       default y if SMP && !LOCAL_TIMERS
+
 config MMU
        bool
        default y
@@ -121,6 +128,9 @@ config GENERIC_CALIBRATE_DELAY
        bool
        default y
 
+config ARCH_SUPPORTS_AOUT
+       def_bool y
+
 config ARCH_MAY_HAVE_PC_FDC
        bool
 
@@ -187,6 +197,8 @@ config ARCH_REALVIEW
        bool "ARM Ltd. RealView family"
        select ARM_AMBA
        select ICST307
+       select GENERIC_TIME
+       select GENERIC_CLOCKEVENTS
        help
          This enables support for ARM Ltd RealView boards.
 
@@ -242,6 +254,7 @@ config ARCH_EP93XX
        select ARM_AMBA
        select ARM_VIC
        select GENERIC_GPIO
+       select HAVE_GPIO_LIB
        help
          This enables support for the Cirrus EP93xx series of CPUs.
 
@@ -358,15 +371,17 @@ config ARCH_MXC
        help
          Support for Freescale MXC/iMX-based family of processors
 
-config ARCH_ORION
+config ARCH_ORION5X
        bool "Marvell Orion"
        depends on MMU
        select PCI
        select GENERIC_GPIO
        select GENERIC_TIME
        select GENERIC_CLOCKEVENTS
+       select PLAT_ORION
        help
-         Support for Marvell Orion System on Chip family.
+         Support for the following Marvell Orion 5x series SoCs:
+         Orion-1 (5181), Orion-NAS (5182), Orion-2 (5281.)
 
 config ARCH_PNX4008
        bool "Philips Nexperia PNX4008 Mobile"
@@ -378,6 +393,7 @@ config ARCH_PXA
        depends on MMU
        select ARCH_MTD_XIP
        select GENERIC_GPIO
+       select HAVE_GPIO_LIB
        select GENERIC_TIME
        select GENERIC_CLOCKEVENTS
        select TICK_ONESHOT
@@ -400,9 +416,14 @@ config ARCH_SA1100
        bool "SA1100-based"
        select ISA
        select ARCH_DISCONTIGMEM_ENABLE
+       select ARCH_SPARSEMEM_ENABLE
+       select ARCH_SELECT_MEMORY_MODEL
        select ARCH_MTD_XIP
        select GENERIC_GPIO
        select GENERIC_TIME
+       select GENERIC_CLOCKEVENTS
+       select TICK_ONESHOT
+       select HAVE_GPIO_LIB
        help
          Support for StrongARM 11x0 based boards.
 
@@ -442,7 +463,9 @@ config ARCH_DAVINCI
 config ARCH_OMAP
        bool "TI OMAP"
        select GENERIC_GPIO
+       select HAVE_GPIO_LIB
        select GENERIC_TIME
+       select GENERIC_CLOCKEVENTS
        help
          Support for TI's OMAP platform (OMAP1 and OMAP2).
 
@@ -489,7 +512,7 @@ source "arch/arm/mach-omap1/Kconfig"
 
 source "arch/arm/mach-omap2/Kconfig"
 
-source "arch/arm/mach-orion/Kconfig"
+source "arch/arm/mach-orion5x/Kconfig"
 
 source "arch/arm/plat-s3c24xx/Kconfig"
 source "arch/arm/plat-s3c/Kconfig"
@@ -536,6 +559,9 @@ config ARCH_ACORN
 config PLAT_IOP
        bool
 
+config PLAT_ORION
+       bool
+
 source arch/arm/mm/Kconfig
 
 config IWMMXT
@@ -623,7 +649,7 @@ source "kernel/time/Kconfig"
 
 config SMP
        bool "Symmetric Multi-Processing (EXPERIMENTAL)"
-       depends on EXPERIMENTAL && REALVIEW_MPCORE
+       depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP)
        help
          This enables support for systems with more than one CPU. If you have
          a system with only one CPU, like most personal computers, say N. If
@@ -635,8 +661,7 @@ config SMP
          processor machines. On a single processor machine, the kernel will
          run faster if you say N here.
 
-         See also the <file:Documentation/smp.txt>,
-         <file:Documentation/i386/IO-APIC.txt>,
+         See also <file:Documentation/i386/IO-APIC.txt>,
          <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
          <http://www.linuxdoc.org/docs.html#howto>.
 
@@ -657,7 +682,7 @@ config HOTPLUG_CPU
 
 config LOCAL_TIMERS
        bool "Use local timer interrupts"
-       depends on SMP && REALVIEW_MPCORE
+       depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP)
        default y
        help
          Enable support for local timers on SMP platforms, rather then the
@@ -748,6 +773,12 @@ config ARCH_DISCONTIGMEM_ENABLE
          or have huge holes in the physical address space for other reasons.
          See <file:Documentation/vm/numa> for more.
 
+config ARCH_SPARSEMEM_ENABLE
+       bool
+
+config ARCH_SELECT_MEMORY_MODEL
+       bool
+
 config NODES_SHIFT
        int
        default "4" if ARCH_LH7A40X
@@ -913,6 +944,14 @@ config KEXEC
          initially work for you.  It may help to enable device hotplugging
          support.
 
+config ATAGS_PROC
+       bool "Export atags in procfs"
+       depends on KEXEC
+       default y
+       help
+         Should the atags used to boot the kernel be exported in an "atags"
+         file in procfs. Useful with kexec.
+
 endmenu
 
 if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA)
@@ -1076,12 +1115,7 @@ source "drivers/block/Kconfig"
 
 source "drivers/misc/Kconfig"
 
-if PCMCIA || ARCH_CLPS7500 || ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX \
-       || ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \
-       || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \
-       || ARCH_IXP23XX
 source "drivers/ide/Kconfig"
-endif
 
 source "drivers/scsi/Kconfig"
 
@@ -1109,6 +1143,8 @@ source "drivers/i2c/Kconfig"
 
 source "drivers/spi/Kconfig"
 
+source "drivers/gpio/Kconfig"
+
 source "drivers/w1/Kconfig"
 
 source "drivers/power/Kconfig"
@@ -1143,12 +1179,12 @@ source "drivers/dma/Kconfig"
 
 source "drivers/dca/Kconfig"
 
+source "drivers/uio/Kconfig"
+
 endmenu
 
 source "fs/Kconfig"
 
-source "kernel/Kconfig.instrumentation"
-
 source "arch/arm/Kconfig.debug"
 
 source "security/Kconfig"