config ARM
bool
default y
+ select HAVE_IDE
select RTC_LIB
select SYS_SUPPORTS_APM_EMULATION
+ select HAVE_OPROFILE
+ select HAVE_KPROBES if (!XIP_KERNEL)
+ select HAVE_KRETPROBES if (HAVE_KPROBES)
help
The ARM series is a line of low-power-consumption RISC chip designs
licensed by ARM Ltd and targeted at embedded applications and
bool
default n
+config GENERIC_CLOCKEVENTS_BROADCAST
+ bool
+ depends on GENERIC_CLOCKEVENTS
+ default y if SMP && !LOCAL_TIMERS
+
config MMU
bool
default y
bool
default y
+config GENERIC_LOCKBREAK
+ bool
+ default y
+ depends on SMP && PREEMPT
+
config RWSEM_GENERIC_SPINLOCK
bool
default y
bool
default y
+config ARCH_SUPPORTS_AOUT
+ def_bool y
+
config ARCH_MAY_HAVE_PC_FDC
bool
config ARCH_MTD_XIP
bool
+if OPROFILE
+
+config OPROFILE_ARMV6
+ def_bool y
+ depends on CPU_V6 && !SMP
+ select OPROFILE_ARM11_CORE
+
+config OPROFILE_MPCORE
+ def_bool y
+ depends on CPU_V6 && SMP
+ select OPROFILE_ARM11_CORE
+
+config OPROFILE_ARM11_CORE
+ bool
+
+endif
+
config VECTORS_BASE
hex
default 0xffff0000 if MMU || CPU_HIGH_VECTOR
bool "ARM Ltd. RealView family"
select ARM_AMBA
select ICST307
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
help
This enables support for ARM Ltd RealView boards.
bool "Atmel AT91"
select GENERIC_GPIO
help
- This enables support for systems based on the Atmel AT91RM9200
- and AT91SAM9xxx processors.
+ This enables support for systems based on the Atmel AT91RM9200,
+ AT91SAM9 and AT91CAP9 processors.
config ARCH_CLPS7500
bool "Cirrus CL-PS7500FE"
bool "EP93xx-based"
select ARM_AMBA
select ARM_VIC
+ select GENERIC_GPIO
+ select HAVE_GPIO_LIB
help
This enables support for the Cirrus EP93xx series of CPUs.
help
Support for Freescale MXC/iMX-based family of processors
+config ARCH_ORION5X
+ bool "Marvell Orion"
+ depends on MMU
+ select PCI
+ select GENERIC_GPIO
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ select PLAT_ORION
+ help
+ Support for the following Marvell Orion 5x series SoCs:
+ Orion-1 (5181), Orion-NAS (5182), Orion-2 (5281.)
+
config ARCH_PNX4008
bool "Philips Nexperia PNX4008 Mobile"
help
depends on MMU
select ARCH_MTD_XIP
select GENERIC_GPIO
+ select HAVE_GPIO_LIB
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
+ select TICK_ONESHOT
help
Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
bool "SA1100-based"
select ISA
select ARCH_DISCONTIGMEM_ENABLE
+ select ARCH_SPARSEMEM_ENABLE
+ select ARCH_SELECT_MEMORY_MODEL
select ARCH_MTD_XIP
select GENERIC_GPIO
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ select TICK_ONESHOT
+ select HAVE_GPIO_LIB
help
Support for StrongARM 11x0 based boards.
config ARCH_OMAP
bool "TI OMAP"
select GENERIC_GPIO
+ select HAVE_GPIO_LIB
select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
help
Support for TI's OMAP platform (OMAP1 and OMAP2).
+config ARCH_MSM7X00A
+ bool "Qualcomm MSM7X00A"
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ help
+ Support for Qualcomm MSM7X00A based systems. This runs on the ARM11
+ apps processor of the MSM7X00A and depends on a shared memory
+ interface to the ARM9 modem processor which runs the baseband stack
+ and controls some vital subsystems (clock and power control, etc).
+ <http://www.cdmatech.com/products/msm7200_chipset_solution.jsp>
+
endchoice
source "arch/arm/mach-clps711x/Kconfig"
source "arch/arm/mach-omap2/Kconfig"
+source "arch/arm/mach-orion5x/Kconfig"
+
source "arch/arm/plat-s3c24xx/Kconfig"
source "arch/arm/plat-s3c/Kconfig"
source "arch/arm/mach-ks8695/Kconfig"
+source "arch/arm/mach-msm/Kconfig"
+
# Definitions to make life easier
config ARCH_ACORN
bool
config PLAT_IOP
bool
+config PLAT_ORION
+ bool
+
source arch/arm/mm/Kconfig
config IWMMXT
bool
config PCI
- bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695
+ bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695 || MACH_ARMCORE
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
VESA. If you have PCI, say Y, otherwise N.
- The PCI-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>, contains valuable
- information about which PCI hardware does work under Linux and which
- doesn't.
-
config PCI_SYSCALL
def_bool PCI
depends on PCI && ARCH_SHARK
default y
+config PCI_HOST_ITE8152
+ bool
+ depends on PCI && MACH_ARMCORE
+ default y
+ select DMABOUNCE
+
source "drivers/pci/Kconfig"
source "drivers/pcmcia/Kconfig"
config SMP
bool "Symmetric Multi-Processing (EXPERIMENTAL)"
- depends on EXPERIMENTAL && REALVIEW_MPCORE
+ depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP)
help
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
processor machines. On a single processor machine, the kernel will
run faster if you say N here.
- See also the <file:Documentation/smp.txt>,
- <file:Documentation/i386/IO-APIC.txt>,
+ See also <file:Documentation/i386/IO-APIC.txt>,
<file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
<http://www.linuxdoc.org/docs.html#howto>.
config LOCAL_TIMERS
bool "Use local timer interrupts"
- depends on SMP && REALVIEW_MPCORE
+ depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP)
default y
help
Enable support for local timers on SMP platforms, rather then the
default 128 if ARCH_L7200
default 200 if ARCH_EBSA110 || ARCH_S3C2410
default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
+ default AT91_TIMER_HZ if ARCH_AT91
default 100
config AEABI
or have huge holes in the physical address space for other reasons.
See <file:Documentation/vm/numa> for more.
+config ARCH_SPARSEMEM_ENABLE
+ bool
+
+config ARCH_SELECT_MEMORY_MODEL
+ bool
+
config NODES_SHIFT
int
default "4" if ARCH_LH7A40X
ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
ARCH_AT91 || MACH_TRIZEPS4 || ARCH_DAVINCI || \
- ARCH_KS8695
+ ARCH_KS8695 || MACH_RD88F5182
help
If you say Y here, the LEDs on your machine will be used
to provide useful information about your current system status.
initially work for you. It may help to enable device hotplugging
support.
+config ATAGS_PROC
+ bool "Export atags in procfs"
+ depends on KEXEC
+ default y
+ help
+ Should the atags used to boot the kernel be exported in an "atags"
+ file in procfs. Useful with kexec.
+
endmenu
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX )
+if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA)
menu "CPU Frequency scaling"
If in doubt, say N.
+config CPU_FREQ_PXA
+ bool
+ depends on CPU_FREQ && ARCH_PXA && PXA25x
+ default y
+ select CPU_FREQ_DEFAULT_GOV_USERSPACE
+
endmenu
endif
config VFP
bool "VFP-format floating point maths"
- depends on CPU_V6 || CPU_ARM926T
+ depends on CPU_V6 || CPU_ARM926T || CPU_V7 || CPU_FEROCEON
help
Say Y to include VFP support code in the kernel. This is needed
if your hardware includes a VFP unit.
Say N if your target does not have VFP hardware.
+config VFPv3
+ bool
+ depends on VFP
+ default y if CPU_V7
+
+config NEON
+ bool "Advanced SIMD (NEON) Extension support"
+ depends on VFPv3 && CPU_V7
+ help
+ Say Y to include support code for NEON, the ARMv7 Advanced SIMD
+ Extension.
+
endmenu
menu "Userspace binary formats"
source "kernel/power/Kconfig"
+config ARCH_SUSPEND_POSSIBLE
+ def_bool y
+
endmenu
source "net/Kconfig"
source "drivers/misc/Kconfig"
-if PCMCIA || ARCH_CLPS7500 || ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX \
- || ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \
- || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \
- || ARCH_IXP23XX
source "drivers/ide/Kconfig"
-endif
source "drivers/scsi/Kconfig"
source "drivers/spi/Kconfig"
+source "drivers/gpio/Kconfig"
+
source "drivers/w1/Kconfig"
source "drivers/power/Kconfig"
source "drivers/dma/Kconfig"
+source "drivers/dca/Kconfig"
+
+source "drivers/uio/Kconfig"
+
endmenu
source "fs/Kconfig"
-source "kernel/Kconfig.instrumentation"
-
source "arch/arm/Kconfig.debug"
source "security/Kconfig"
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff