config ARM
bool
default y
+ select HAVE_AOUT
select HAVE_IDE
select RTC_LIB
select SYS_SUPPORTS_APM_EMULATION
select HAVE_ARCH_KGDB
select HAVE_KPROBES if (!XIP_KERNEL)
select HAVE_KRETPROBES if (HAVE_KPROBES)
- select HAVE_FTRACE if (!XIP_KERNEL)
- select HAVE_DYNAMIC_FTRACE if (HAVE_FTRACE)
+ select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
select HAVE_GENERIC_DMA_COHERENT
help
The ARM series is a line of low-power-consumption RISC chip designs
bool
default y
-config ARCH_SUPPORTS_AOUT
- def_bool y
-
config ARCH_MAY_HAVE_PC_FDC
bool
source "init/Kconfig"
+source "kernel/Kconfig.freezer"
+
menu "System Type"
choice
config ARCH_AAEC2000
bool "Agilent AAEC-2000 based"
+ select CPU_ARM920T
select ARM_AMBA
select HAVE_CLK
help
bool "ARM Ltd. Integrator family"
select ARM_AMBA
select HAVE_CLK
+ select COMMON_CLKDEV
select ICST525
help
Support for ARM's Integrator platform.
bool "ARM Ltd. RealView family"
select ARM_AMBA
select HAVE_CLK
+ select COMMON_CLKDEV
select ICST307
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select ARM_AMBA
select ARM_VIC
select HAVE_CLK
+ select COMMON_CLKDEV
select ICST307
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
This enables support for systems based on the Atmel AT91RM9200,
AT91SAM9 and AT91CAP9 processors.
-config ARCH_CLPS7500
- bool "Cirrus CL-PS7500FE"
- select TIMER_ACORN
- select ISA
- select NO_IOPORT
- select ARCH_SPARSEMEM_ENABLE
- help
- Support for the Cirrus Logic PS7500FE system-on-a-chip.
-
config ARCH_CLPS711X
bool "Cirrus Logic CLPS711x/EP721x-based"
+ select CPU_ARM720T
help
Support for Cirrus Logic 711x/721x based boards.
config ARCH_EBSA110
bool "EBSA-110"
+ select CPU_SA110
select ISA
select NO_IOPORT
help
config ARCH_EP93XX
bool "EP93xx-based"
+ select CPU_ARM920T
select ARM_AMBA
select ARM_VIC
select GENERIC_GPIO
select HAVE_CLK
+ select COMMON_CLKDEV
select ARCH_REQUIRE_GPIOLIB
help
This enables support for the Cirrus EP93xx series of CPUs.
config ARCH_FOOTBRIDGE
bool "FootBridge"
+ select CPU_SA110
select FOOTBRIDGE
help
Support for systems based on the DC21285 companion chip
config ARCH_NETX
bool "Hilscher NetX based"
+ select CPU_ARM926T
select ARM_VIC
help
This enables support for systems based on the Hilscher NetX Soc
config ARCH_H720X
bool "Hynix HMS720x-based"
+ select CPU_ARM720T
select ISA_DMA_API
help
This enables support for systems based on the Hynix HMS720x
config ARCH_IMX
bool "IMX"
+ select CPU_ARM920T
select GENERIC_GPIO
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
config ARCH_IOP13XX
bool "IOP13xx-based"
depends on MMU
+ select CPU_XSC3
select PLAT_IOP
select PCI
select ARCH_SUPPORTS_MSI
config ARCH_IOP32X
bool "IOP32x-based"
depends on MMU
+ select CPU_XSCALE
select PLAT_IOP
select PCI
select GENERIC_GPIO
config ARCH_IOP33X
bool "IOP33x-based"
depends on MMU
+ select CPU_XSCALE
select PLAT_IOP
select PCI
select GENERIC_GPIO
config ARCH_IXP23XX
bool "IXP23XX-based"
depends on MMU
+ select CPU_XSC3
select PCI
help
Support for Intel's IXP23xx (XScale) family of processors.
config ARCH_IXP2000
bool "IXP2400/2800-based"
depends on MMU
+ select CPU_XSCALE
select PCI
help
Support for Intel's IXP2400/2800 (XScale) family of processors.
config ARCH_IXP4XX
bool "IXP4xx-based"
depends on MMU
+ select CPU_XSCALE
select GENERIC_GPIO
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
- select ZONE_DMA if PCI
+ select DMABOUNCE if PCI
help
Support for Intel's IXP4XX (XScale) family of processors.
config ARCH_L7200
bool "LinkUp-L7200"
+ select CPU_ARM720T
select FIQ
help
Say Y here if you intend to run this kernel on a LinkUp Systems
config ARCH_KIRKWOOD
bool "Marvell Kirkwood"
+ select CPU_FEROCEON
select PCI
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
config ARCH_KS8695
bool "Micrel/Kendin KS8695"
+ select CPU_ARM922T
select GENERIC_GPIO
help
Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
config ARCH_NS9XXX
bool "NetSilicon NS9xxx"
+ select CPU_ARM926T
select GENERIC_GPIO
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
config ARCH_LOKI
bool "Marvell Loki (88RC8480)"
+ select CPU_FEROCEON
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select PLAT_ORION
config ARCH_MV78XX0
bool "Marvell MV78xx0"
+ select CPU_FEROCEON
select PCI
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
config ARCH_ORION5X
bool "Marvell Orion"
depends on MMU
+ select CPU_FEROCEON
select PCI
select GENERIC_GPIO
select GENERIC_TIME
help
Support for the following Marvell Orion 5x series SoCs:
Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
- Orion-2 (5281).
+ Orion-2 (5281), Orion-1-90 (6183).
config ARCH_PNX4008
bool "Philips Nexperia PNX4008 Mobile"
+ select CPU_ARM926T
select HAVE_CLK
help
This enables support for Philips PNX4008 mobile platform.
select ARCH_MTD_XIP
select GENERIC_GPIO
select HAVE_CLK
+ select COMMON_CLKDEV
select ARCH_REQUIRE_GPIOLIB
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
config ARCH_SA1100
bool "SA1100-based"
+ select CPU_SA1100
select ISA
select ARCH_SPARSEMEM_ENABLE
select ARCH_MTD_XIP
config ARCH_SHARK
bool "Shark"
+ select CPU_SA110
select ISA
select ISA_DMA
select ZONE_DMA
config ARCH_LH7A40X
bool "Sharp LH7A40X"
+ select CPU_ARM922T
select ARCH_DISCONTIGMEM_ENABLE if !LH7A40X_CONTIGMEM
select ARCH_SPARSEMEM_ENABLE if !LH7A40X_CONTIGMEM
help
config ARCH_DAVINCI
bool "TI DaVinci"
+ select CPU_ARM926T
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
select ZONE_DMA
help
help
Support for TI's OMAP platform (OMAP1 and OMAP2).
-config ARCH_MSM7X00A
- bool "Qualcomm MSM7X00A"
+config ARCH_MSM
+ bool "Qualcomm MSM"
+ select CPU_V6
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
help
- Support for Qualcomm MSM7X00A based systems. This runs on the ARM11
- apps processor of the MSM7X00A and depends on a shared memory
+ Support for Qualcomm MSM7K based systems. This runs on the ARM11
+ apps processor of the MSM7K and depends on a shared memory
interface to the ARM9 modem processor which runs the baseband stack
and controls some vital subsystems (clock and power control, etc).
- <http://www.cdmatech.com/products/msm7200_chipset_solution.jsp>
+
+config ARCH_W90X900
+ bool "Nuvoton W90X900 CPU"
+ select CPU_ARM926T
+ help
+ Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
+ can login www.mcuos.com or www.nuvoton.com to know more.
endchoice
source "arch/arm/mach-msm/Kconfig"
+source "arch/arm/mach-w90x900/Kconfig"
+
# Definitions to make life easier
config ARCH_ACORN
bool
config LOCAL_TIMERS
bool "Use local timer interrupts"
- depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP)
+ depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || REALVIEW_EB_A9MP)
default y
help
Enable support for local timers on SMP platforms, rather then the
ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
- ARCH_AT91 || MACH_TRIZEPS4 || ARCH_DAVINCI || \
+ ARCH_AT91 || ARCH_DAVINCI || \
ARCH_KS8695 || MACH_RD88F5182
help
If you say Y here, the LEDs on your machine will be used
source "drivers/usb/Kconfig"
+source "drivers/uwb/Kconfig"
+
source "drivers/mmc/Kconfig"
source "drivers/memstick/Kconfig"
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff