VERSION = 2
PATCHLEVEL = 6
-SUBLEVEL = 15
-EXTRAVERSION =-rc4
-NAME=Affluent Albatross
+SUBLEVEL = 25
+EXTRAVERSION =
+NAME = Funky Weasel is Jiggy wit it
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
# Comments in this file are targeted only to the developer, do not
# expect to learn how to build the kernel reading this file.
-# Do not print "Entering directory ..."
-MAKEFLAGS += --no-print-directory
+# Do not:
+# o use make's built-in rules and variables
+# (this increases performance and avoids hard-to-debug behaviour);
+# o print "Entering directory ...";
+MAKEFLAGS += -rR --no-print-directory
# We are using a recursive build, so we need to do a little thinking
# to get the ordering right.
KBUILD_VERBOSE = 0
endif
-# Call sparse as part of compilation of C files
-# Use 'make C=1' to enable sparse checking
+# Call a source code checker (by default, "sparse") as part of the
+# C compilation.
+#
+# Use 'make C=1' to enable checking of only re-compiled files.
+# Use 'make C=2' to enable checking of *all* source files, regardless
+# of whether they are re-compiled or not.
+#
+# See the file "Documentation/sparse.txt" for more details, including
+# where to get the "sparse" utility.
ifdef C
ifeq ("$(origin C)", "command line")
# In both cases the working directory must be the root of the kernel src.
# 1) O=
# Use "make O=dir/to/store/output/files/"
-#
+#
# 2) Set KBUILD_OUTPUT
# Set the environment variable KBUILD_OUTPUT to point to the directory
# where the output files shall be placed.
endif
# That's our default target when none is given on the command line
-.PHONY: _all
+PHONY := _all
_all:
+# Cancel implicit rules on top Makefile
+$(CURDIR)/Makefile Makefile: ;
+
ifneq ($(KBUILD_OUTPUT),)
# Invoke a second make in the output directory, passing relevant variables
# check that the output directory actually exists
$(if $(KBUILD_OUTPUT),, \
$(error output directory "$(saved-output)" does not exist))
-.PHONY: $(MAKECMDGOALS)
+PHONY += $(MAKECMDGOALS) sub-make
+
+$(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
+ $(Q)@:
-$(filter-out _all,$(MAKECMDGOALS)) _all:
+sub-make: FORCE
$(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
KBUILD_SRC=$(CURDIR) \
- KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile $@
+ KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile \
+ $(filter-out _all sub-make,$(MAKECMDGOALS))
# Leave processing to above invocation of make
skip-makefile := 1
# If building an external module we do not care about the all: rule
# but instead _all depend on modules
-.PHONY: all
+PHONY += all
ifeq ($(KBUILD_EXTMOD),)
_all: all
else
src := $(srctree)
obj := $(objtree)
-VPATH := $(srctree)
+VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
export srctree objtree VPATH TOPDIR
-nullstring :=
-space := $(nullstring) # end of line
-
-# Take the contents of any files called localversion* and the config
-# variable CONFIG_LOCALVERSION and append them to KERNELRELEASE. Be
-# careful not to include files twice if building in the source
-# directory. LOCALVERSION from the command line override all of this
-
-localver := $(objtree)/localversion* $(srctree)/localversion*
-localver := $(sort $(wildcard $(localver)))
-# skip backup files (containing '~')
-localver := $(foreach f, $(localver), $(if $(findstring ~, $(f)),,$(f)))
-
-LOCALVERSION = $(subst $(space),, \
- $(shell cat /dev/null $(localver)) \
- $(patsubst "%",%,$(CONFIG_LOCALVERSION)))
-
-KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)$(LOCALVERSION)
# SUBARCH tells the usermode build what the underlying arch is. That is set
# first, and if a usermode build is happening, the "ARCH=um" on the command
SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
-e s/arm.*/arm/ -e s/sa110/arm/ \
-e s/s390x/s390/ -e s/parisc64/parisc/ \
- -e s/ppc64/powerpc/ )
+ -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
+ -e s/sh.*/sh/ )
# Cross compiling and selecting different set of gcc/bin-utils
# ---------------------------------------------------------------------------
# Alternatively CROSS_COMPILE can be set in the environment.
# Default value for CROSS_COMPILE is not to prefix executables
# Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
-
+export KBUILD_BUILDHOST := $(SUBARCH)
ARCH ?= $(SUBARCH)
CROSS_COMPILE ?=
# Architecture as present in compile.h
-UTS_MACHINE := $(ARCH)
+UTS_MACHINE := $(ARCH)
+SRCARCH := $(ARCH)
+
+# Additional ARCH settings for x86
+ifeq ($(ARCH),i386)
+ SRCARCH := x86
+endif
+ifeq ($(ARCH),x86_64)
+ SRCARCH := x86
+endif
+
+KCONFIG_CONFIG ?= .config
# SHELL used by kbuild
CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
else if [ -x /bin/bash ]; then echo /bin/bash; \
else echo sh; fi ; fi)
-HOSTCC = gcc
-HOSTCXX = g++
-HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer
-HOSTCXXFLAGS = -O2
+HOSTCC = gcc
+HOSTCXX = g++
+HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer
+HOSTCXXFLAGS = -O2
-# Decide whether to build built-in, modular, or both.
-# Normally, just do built-in.
+# Decide whether to build built-in, modular, or both.
+# Normally, just do built-in.
KBUILD_MODULES :=
KBUILD_BUILTIN := 1
# If we have only "make modules", don't compile built-in objects.
# When we're building modules with modversions, we need to consider
# the built-in objects during the descend as well, in order to
-# make sure the checksums are uptodate before we record them.
+# make sure the checksums are up to date before we record them.
ifeq ($(MAKECMDGOALS),modules)
KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
#
# If $(quiet) is empty, the whole command will be printed.
# If it is set to "quiet_", only the short version will be printed.
-# If it is set to "silent_", nothing wil be printed at all, since
+# If it is set to "silent_", nothing will be printed at all, since
# the variable $(silent_cmd_cc_o_c) doesn't exist.
#
-# A simple variant is to prefix commands with $(Q) - that's usefull
+# A simple variant is to prefix commands with $(Q) - that's useful
# for commands that shall be hidden in non-verbose mode.
#
# $(Q)ln $@ :<
export quiet Q KBUILD_VERBOSE
-######
-# cc support functions to be used (only) in arch/$(ARCH)/Makefile
-# See documentation in Documentation/kbuild/makefiles.txt
-
-# cc-option
-# Usage: cflags-y += $(call cc-option, -march=winchip-c6, -march=i586)
-
-cc-option = $(shell if $(CC) $(CFLAGS) $(1) -S -o /dev/null -xc /dev/null \
- > /dev/null 2>&1; then echo "$(1)"; else echo "$(2)"; fi ;)
-
-# For backward compatibility
-check_gcc = $(warning check_gcc is deprecated - use cc-option) \
- $(call cc-option, $(1),$(2))
-
-# cc-option-yn
-# Usage: flag := $(call cc-option-yn, -march=winchip-c6)
-cc-option-yn = $(shell if $(CC) $(CFLAGS) $(1) -S -o /dev/null -xc /dev/null \
- > /dev/null 2>&1; then echo "y"; else echo "n"; fi;)
-
-# cc-option-align
-# Prefix align with either -falign or -malign
-cc-option-align = $(subst -functions=0,,\
- $(call cc-option,-falign-functions=0,-malign-functions=0))
-
-# cc-version
-# Usage gcc-ver := $(call cc-version $(CC))
-cc-version = $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-version.sh \
- $(if $(1), $(1), $(CC)))
-
# Look for make include files relative to root of kernel src
MAKEFLAGS += --include-dir=$(srctree)
-# We need some generic definitions
-include $(srctree)/scripts/Kbuild.include
-
-# For maximum performance (+ possibly random breakage, uncomment
-# the following)
-
-#MAKEFLAGS += -rR
+# We need some generic definitions (do not try to remake the file).
+$(srctree)/scripts/Kbuild.include: ;
+include $(srctree)/scripts/Kbuild.include
# Make variables (CC, etc...)
MODFLAGS = -DMODULE
CFLAGS_MODULE = $(MODFLAGS)
AFLAGS_MODULE = $(MODFLAGS)
-LDFLAGS_MODULE = -r
+LDFLAGS_MODULE =
CFLAGS_KERNEL =
AFLAGS_KERNEL =
$(if $(KBUILD_SRC),-Iinclude2 -I$(srctree)/include) \
-include include/linux/autoconf.h
-CPPFLAGS := -D__KERNEL__ $(LINUXINCLUDE)
+KBUILD_CPPFLAGS := -D__KERNEL__ $(LINUXINCLUDE)
-CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
- -fno-strict-aliasing -fno-common \
- -ffreestanding
-AFLAGS := -D__ASSEMBLY__
+KBUILD_CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
+ -fno-strict-aliasing -fno-common \
+ -Werror-implicit-function-declaration
+KBUILD_AFLAGS := -D__ASSEMBLY__
-export VERSION PATCHLEVEL SUBLEVEL EXTRAVERSION LOCALVERSION KERNELRELEASE \
- ARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC \
- CPP AR NM STRIP OBJCOPY OBJDUMP MAKE AWK GENKSYMS PERL UTS_MACHINE \
- HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
+# Read KERNELRELEASE from include/config/kernel.release (if it exists)
+KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
+KERNELVERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
-export CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS
-export CFLAGS CFLAGS_KERNEL CFLAGS_MODULE
-export AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
+export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
+export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
+export CPP AR NM STRIP OBJCOPY OBJDUMP MAKE AWK GENKSYMS PERL UTS_MACHINE
+export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
+
+export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS
+export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE
+export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
# When compiling out-of-tree modules, put MODVERDIR in the module
# tree rather than in the kernel tree. The kernel tree might
# Rules shared between *config targets and build targets
# Basic helpers built in scripts/
-.PHONY: scripts_basic
+PHONY += scripts_basic
scripts_basic:
$(Q)$(MAKE) $(build)=scripts/basic
# To avoid any implicit rule to kick in, define an empty command.
scripts/basic/%: scripts_basic ;
-.PHONY: outputmakefile
-# outputmakefile generate a Makefile to be placed in output directory, if
-# using a seperate output directory. This allows convinient use
-# of make in output directory
+PHONY += outputmakefile
+# outputmakefile generates a Makefile in the output directory, if using a
+# separate output directory. This allows convenient use of make in the
+# output directory.
outputmakefile:
- $(Q)if test ! $(srctree) -ef $(objtree); then \
- $(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
- $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL) \
- > $(objtree)/Makefile; \
- echo ' GEN $(objtree)/Makefile'; \
- fi
+ifneq ($(KBUILD_SRC),)
+ $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
+ $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
+endif
# To make sure we do not include .config for any of the *config targets
# catch them early, and hand them over to scripts/kconfig/Makefile
# It is allowed to specify more targets when calling make, including
# mixing *config targets and build targets.
-# For example 'make oldconfig all'.
+# For example 'make oldconfig all'.
# Detect when mixed targets is specified, and make a second invocation
# of make so .config is not included in this case either (for *config).
no-dot-config-targets := clean mrproper distclean \
- cscope TAGS tags help %docs check% kernelrelease
+ cscope TAGS tags help %docs check% \
+ include/linux/version.h headers_% \
+ kernelrelease kernelversion
config-targets := 0
mixed-targets := 0
# Read arch specific Makefile to set KBUILD_DEFCONFIG as needed.
# KBUILD_DEFCONFIG may point out an alternative default configuration
# used for 'make defconfig'
-include $(srctree)/arch/$(ARCH)/Makefile
+include $(srctree)/arch/$(SRCARCH)/Makefile
export KBUILD_DEFCONFIG
config %config: scripts_basic outputmakefile FORCE
- $(Q)mkdir -p include/linux
+ $(Q)mkdir -p include/linux include/config
$(Q)$(MAKE) $(build)=scripts/kconfig $@
else
ifeq ($(KBUILD_EXTMOD),)
# Additional helpers built in scripts/
# Carefully list dependencies so we do not try to build scripts twice
-# in parrallel
-.PHONY: scripts
-scripts: scripts_basic include/config/MARKER
+# in parallel
+PHONY += scripts
+scripts: scripts_basic include/config/auto.conf
$(Q)$(MAKE) $(build)=$(@)
-scripts_basic: include/linux/autoconf.h
-
# Objects we will link into vmlinux / subdirs we need to visit
init-y := init/
drivers-y := drivers/ sound/
endif # KBUILD_EXTMOD
ifeq ($(dot-config),1)
-# In this section, we need .config
+# Read in config
+-include include/config/auto.conf
+ifeq ($(KBUILD_EXTMOD),)
# Read in dependencies to all Kconfig* files, make sure to run
# oldconfig if changes are detected.
--include .config.cmd
-
-include .config
+-include include/config/auto.conf.cmd
-# If .config needs to be updated, it will be done via the dependency
-# that autoconf has on .config.
# To avoid any implicit rule to kick in, define an empty command
-.config: ;
+$(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
-# If .config is newer than include/linux/autoconf.h, someone tinkered
-# with it and forgot to run make oldconfig
-include/linux/autoconf.h: .config
- $(Q)mkdir -p include/linux
+# If .config is newer than include/config/auto.conf, someone tinkered
+# with it and forgot to run make oldconfig.
+# if auto.conf.cmd is missing then we are probably in a cleaned tree so
+# we execute the config step to be sure to catch updated Kconfig files
+include/config/auto.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
$(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
else
+# external modules needs include/linux/autoconf.h and include/config/auto.conf
+# but do not care if they are up-to-date. Use auto.conf to trigger the test
+PHONY += include/config/auto.conf
+
+include/config/auto.conf:
+ $(Q)test -e include/linux/autoconf.h -a -e $@ || ( \
+ echo; \
+ echo " ERROR: Kernel configuration is invalid."; \
+ echo " include/linux/autoconf.h or $@ are missing."; \
+ echo " Run 'make oldconfig && make prepare' on kernel src to fix it."; \
+ echo; \
+ /bin/false)
+
+endif # KBUILD_EXTMOD
+
+else
# Dummy target needed, because used as prerequisite
-include/linux/autoconf.h: ;
-endif
+include/config/auto.conf: ;
+endif # $(dot-config)
# The all: target is the default when no target is given on the
# command line.
# This allow a user to issue only 'make' to build a kernel including modules
-# Defaults vmlinux but it is usually overriden in the arch makefile
+# Defaults vmlinux but it is usually overridden in the arch makefile
all: vmlinux
ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
-CFLAGS += -Os
+KBUILD_CFLAGS += -Os
else
-CFLAGS += -O2
+KBUILD_CFLAGS += -O2
endif
-#Add align options if CONFIG_CC_* is not equal to 0
-add-align = $(if $(filter-out 0,$($(1))),$(cc-option-align)$(2)=$($(1)))
-CFLAGS += $(call add-align,CONFIG_CC_ALIGN_FUNCTIONS,-functions)
-CFLAGS += $(call add-align,CONFIG_CC_ALIGN_LABELS,-labels)
-CFLAGS += $(call add-align,CONFIG_CC_ALIGN_LOOPS,-loops)
-CFLAGS += $(call add-align,CONFIG_CC_ALIGN_JUMPS,-jumps)
+ifneq (CONFIG_FRAME_WARN,0)
+KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN})
+endif
+
+# Force gcc to behave correct even for buggy distributions
+# Arch Makefiles may override this setting
+KBUILD_CFLAGS += $(call cc-option, -fno-stack-protector)
+
+include $(srctree)/arch/$(SRCARCH)/Makefile
ifdef CONFIG_FRAME_POINTER
-CFLAGS += -fno-omit-frame-pointer $(call cc-option,-fno-optimize-sibling-calls,)
+KBUILD_CFLAGS += -fno-omit-frame-pointer -fno-optimize-sibling-calls
else
-CFLAGS += -fomit-frame-pointer
+KBUILD_CFLAGS += -fomit-frame-pointer
endif
ifdef CONFIG_DEBUG_INFO
-CFLAGS += -g
+KBUILD_CFLAGS += -g
+KBUILD_AFLAGS += -gdwarf-2
endif
-include $(srctree)/arch/$(ARCH)/Makefile
+# We trigger additional mismatches with less inlining
+ifdef CONFIG_DEBUG_SECTION_MISMATCH
+KBUILD_CFLAGS += $(call cc-option, -fno-inline-functions-called-once)
+endif
# arch Makefile may override CC so keep this after arch Makefile is included
NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
CHECKFLAGS += $(NOSTDINC_FLAGS)
# warn about C99 declaration after statement
-CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
+KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
+
+# disable pointer signed / unsigned warnings in gcc 4.0
+KBUILD_CFLAGS += $(call cc-option,-Wno-pointer-sign,)
+
+# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
+# But warn user when we do so
+warn-assign = \
+$(warning "WARNING: Appending $$K$(1) ($(K$(1))) from $(origin K$(1)) to kernel $$$(1)")
+
+ifneq ($(KCPPFLAGS),)
+ $(call warn-assign,CPPFLAGS)
+ KBUILD_CPPFLAGS += $(KCPPFLAGS)
+endif
+ifneq ($(KAFLAGS),)
+ $(call warn-assign,AFLAGS)
+ KBUILD_AFLAGS += $(KAFLAGS)
+endif
+ifneq ($(KCFLAGS),)
+ $(call warn-assign,CFLAGS)
+ KBUILD_CFLAGS += $(KCFLAGS)
+endif
-# disable pointer signedness warnings in gcc 4.0
-CFLAGS += $(call cc-option,-Wno-pointer-sign,)
+# Use --build-id when available.
+LDFLAGS_BUILD_ID = $(patsubst -Wl$(comma)%,%,\
+ $(call ld-option, -Wl$(comma)--build-id,))
+LDFLAGS_MODULE += $(LDFLAGS_BUILD_ID)
+LDFLAGS_vmlinux += $(LDFLAGS_BUILD_ID)
# Default kernel image to build when no specific target is given.
-# KBUILD_IMAGE may be overruled on the commandline or
+# KBUILD_IMAGE may be overruled on the command line or
# set in the environment
# Also any assignments in arch/$(ARCH)/Makefile take precedence over
# this default value
# images. Default is /boot, but you can set it to other values
export INSTALL_PATH ?= /boot
-# If CONFIG_LOCALVERSION_AUTO is set, we automatically perform some tests
-# and try to determine if the current source tree is a release tree, of any sort,
-# or if is a pure development tree.
-#
-# A 'release tree' is any tree with a git TAG associated
-# with it. The primary goal of this is to make it safe for a native
-# git/CVS/SVN user to build a release tree (i.e, 2.6.9) and also to
-# continue developing against the current Linus tree, without having the Linus
-# tree overwrite the 2.6.9 tree when installed.
-#
-# Currently, only git is supported.
-# Other SCMs can edit scripts/setlocalversion and add the appropriate
-# checks as needed.
-
-
-ifdef CONFIG_LOCALVERSION_AUTO
- localversion-auto := $(shell $(PERL) $(srctree)/scripts/setlocalversion $(srctree))
- LOCALVERSION := $(LOCALVERSION)$(localversion-auto)
-endif
-
#
# INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory
# relocations required by build roots. This is not defined in the
-# makefile but the arguement can be passed to make if needed.
+# makefile but the argument can be passed to make if needed.
#
-MODLIB := $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
+MODLIB = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
export MODLIB
+#
+# INSTALL_MOD_STRIP, if defined, will cause modules to be
+# stripped after they are installed. If INSTALL_MOD_STRIP is '1', then
+# the default option --strip-debug will be used. Otherwise,
+# INSTALL_MOD_STRIP will used as the options to the strip command.
+
+ifdef INSTALL_MOD_STRIP
+ifeq ($(INSTALL_MOD_STRIP),1)
+mod_strip_cmd = $(STRIP) --strip-debug
+else
+mod_strip_cmd = $(STRIP) $(INSTALL_MOD_STRIP)
+endif # INSTALL_MOD_STRIP=1
+else
+mod_strip_cmd = true
+endif # INSTALL_MOD_STRIP
+export mod_strip_cmd
+
ifeq ($(KBUILD_EXTMOD),)
core-y += kernel/ mm/ fs/ ipc/ security/ crypto/ block/
# Build vmlinux
# ---------------------------------------------------------------------------
-# vmlinux is build from the objects selected by $(vmlinux-init) and
+# vmlinux is built from the objects selected by $(vmlinux-init) and
# $(vmlinux-main). Most are built-in.o files from top-level directories
-# in the kernel tree, others are specified in arch/$(ARCH)Makefile.
+# in the kernel tree, others are specified in arch/$(ARCH)/Makefile.
# Ordering when linking is important, and $(vmlinux-init) must be first.
#
# vmlinux
vmlinux-init := $(head-y) $(init-y)
vmlinux-main := $(core-y) $(libs-y) $(drivers-y) $(net-y)
vmlinux-all := $(vmlinux-init) $(vmlinux-main)
-vmlinux-lds := arch/$(ARCH)/kernel/vmlinux.lds
+vmlinux-lds := arch/$(SRCARCH)/kernel/vmlinux.lds
+export KBUILD_VMLINUX_OBJS := $(vmlinux-all)
# Rule to link vmlinux - also used during CONFIG_KALLSYMS
# May be overridden by arch/$(ARCH)/Makefile
cmd_vmlinux__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) -o $@ \
-T $(vmlinux-lds) $(vmlinux-init) \
--start-group $(vmlinux-main) --end-group \
- $(filter-out $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) FORCE ,$^)
+ $(filter-out $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) vmlinux.o FORCE ,$^)
# Generate new vmlinux version
quiet_cmd_vmlinux_version = GEN .version
$(MAKE) $(build)=init
# Generate System.map
-quiet_cmd_sysmap = SYSMAP
+quiet_cmd_sysmap = SYSMAP
cmd_sysmap = $(CONFIG_SHELL) $(srctree)/scripts/mksysmap
# Link of vmlinux
$(call cmd,vmlinux__)
$(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd
- $(Q)$(if $($(quiet)cmd_sysmap), \
- echo ' $($(quiet)cmd_sysmap) System.map' &&) \
- $(cmd_sysmap) $@ System.map; \
- if [ $$? -ne 0 ]; then \
- rm -f $@; \
- /bin/false; \
+ $(Q)$(if $($(quiet)cmd_sysmap), \
+ echo ' $($(quiet)cmd_sysmap) System.map' &&) \
+ $(cmd_sysmap) $@ System.map; \
+ if [ $$? -ne 0 ]; then \
+ rm -f $@; \
+ /bin/false; \
fi;
$(verify_kallsyms)
endef
kallsyms.o := .tmp_kallsyms$(last_kallsyms).o
define verify_kallsyms
- $(Q)$(if $($(quiet)cmd_sysmap), \
- echo ' $($(quiet)cmd_sysmap) .tmp_System.map' &&) \
+ $(Q)$(if $($(quiet)cmd_sysmap), \
+ echo ' $($(quiet)cmd_sysmap) .tmp_System.map' &&) \
$(cmd_sysmap) .tmp_vmlinux$(last_kallsyms) .tmp_System.map
- $(Q)cmp -s System.map .tmp_System.map || \
- (echo Inconsistent kallsyms data; \
- echo Try setting CONFIG_KALLSYMS_EXTRA_PASS; \
+ $(Q)cmp -s System.map .tmp_System.map || \
+ (echo Inconsistent kallsyms data; \
+ echo Try setting CONFIG_KALLSYMS_EXTRA_PASS; \
rm .tmp_kallsyms* ; /bin/false )
endef
endif # ifdef CONFIG_KALLSYMS
+# Do modpost on a prelinked vmlinux. The finally linked vmlinux has
+# relevant sections renamed as per the linker script.
+quiet_cmd_vmlinux-modpost = LD $@
+ cmd_vmlinux-modpost = $(LD) $(LDFLAGS) -r -o $@ \
+ $(vmlinux-init) --start-group $(vmlinux-main) --end-group \
+ $(filter-out $(vmlinux-init) $(vmlinux-main) $(vmlinux-lds) FORCE ,$^)
+define rule_vmlinux-modpost
+ :
+ +$(call cmd,vmlinux-modpost)
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost $@
+ $(Q)echo 'cmd_$@ := $(cmd_vmlinux-modpost)' > $(dot-target).cmd
+endef
+
# vmlinux image - including updated kernel symbols
-vmlinux: $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) $(kallsyms.o) FORCE
+vmlinux: $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) vmlinux.o $(kallsyms.o) FORCE
+ifdef CONFIG_HEADERS_CHECK
+ $(Q)$(MAKE) -f $(srctree)/Makefile headers_check
+endif
+ifdef CONFIG_SAMPLES
+ $(Q)$(MAKE) $(build)=samples
+endif
+ $(call vmlinux-modpost)
$(call if_changed_rule,vmlinux__)
$(Q)rm -f .old_version
+# build vmlinux.o first to catch section mismatch errors early
+ifdef CONFIG_KALLSYMS
+.tmp_vmlinux1: vmlinux.o
+endif
+vmlinux.o: $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) FORCE
+ $(call if_changed_rule,vmlinux-modpost)
+
# The actual objects are generated when descending,
# make sure no implicit rule kicks in
$(sort $(vmlinux-init) $(vmlinux-main)) $(vmlinux-lds): $(vmlinux-dirs) ;
# make menuconfig etc.
# Error messages still appears in the original language
-.PHONY: $(vmlinux-dirs)
+PHONY += $(vmlinux-dirs)
$(vmlinux-dirs): prepare scripts
$(Q)$(MAKE) $(build)=$@
+# Build the kernel release string
+#
+# The KERNELRELEASE value built here is stored in the file
+# include/config/kernel.release, and is used when executing several
+# make targets, such as "make install" or "make modules_install."
+#
+# The eventual kernel release string consists of the following fields,
+# shown in a hierarchical format to show how smaller parts are concatenated
+# to form the larger and final value, with values coming from places like
+# the Makefile, kernel config options, make command line options and/or
+# SCM tag information.
+#
+# $(KERNELVERSION)
+# $(VERSION) eg, 2
+# $(PATCHLEVEL) eg, 6
+# $(SUBLEVEL) eg, 18
+# $(EXTRAVERSION) eg, -rc6
+# $(localver-full)
+# $(localver)
+# localversion* (files without backups, containing '~')
+# $(CONFIG_LOCALVERSION) (from kernel config setting)
+# $(localver-auto) (only if CONFIG_LOCALVERSION_AUTO is set)
+# ./scripts/setlocalversion (SCM tag, if one exists)
+# $(LOCALVERSION) (from make command line if provided)
+#
+# Note how the final $(localver-auto) string is included *only* if the
+# kernel config option CONFIG_LOCALVERSION_AUTO is selected. Also, at the
+# moment, only git is supported but other SCMs can edit the script
+# scripts/setlocalversion and add the appropriate checks as needed.
+
+pattern = ".*/localversion[^~]*"
+string = $(shell cat /dev/null \
+ `find $(objtree) $(srctree) -maxdepth 1 -regex $(pattern) | sort -u`)
+
+localver = $(subst $(space),, $(string) \
+ $(patsubst "%",%,$(CONFIG_LOCALVERSION)))
+
+# If CONFIG_LOCALVERSION_AUTO is set scripts/setlocalversion is called
+# and if the SCM is know a tag from the SCM is appended.
+# The appended tag is determined by the SCM used.
+#
+# Currently, only git is supported.
+# Other SCMs can edit scripts/setlocalversion and add the appropriate
+# checks as needed.
+ifdef CONFIG_LOCALVERSION_AUTO
+ _localver-auto = $(shell $(CONFIG_SHELL) \
+ $(srctree)/scripts/setlocalversion $(srctree))
+ localver-auto = $(LOCALVERSION)$(_localver-auto)
+endif
+
+localver-full = $(localver)$(localver-auto)
+
+# Store (new) KERNELRELASE string in include/config/kernel.release
+kernelrelease = $(KERNELVERSION)$(localver-full)
+include/config/kernel.release: include/config/auto.conf FORCE
+ $(Q)rm -f $@
+ $(Q)echo $(kernelrelease) > $@
+
+
# Things we need to do before we recursively start building the kernel
# or the modules are listed in "prepare".
# A multi level approach is used. prepareN is processed before prepareN-1.
# version.h and scripts_basic is processed / created.
# Listed in dependency order
-.PHONY: prepare archprepare prepare0 prepare1 prepare2 prepare3
-
-# prepare-all is deprecated, use prepare as valid replacement
-.PHONY: prepare-all
+PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
# prepare3 is used to check if we are building in a separate output directory,
# and if so do:
# 1) Check that make has not been executed in the kernel src $(srctree)
# 2) Create the include2 directory, used for the second asm symlink
-
-prepare3:
+prepare3: include/config/kernel.release
ifneq ($(KBUILD_SRC),)
@echo ' Using $(srctree) as source for kernel'
- $(Q)if [ -f $(srctree)/.config ]; then \
+ $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
echo " $(srctree) is not clean, please run 'make mrproper'";\
echo " in the '$(srctree)' directory.";\
/bin/false; \
fi;
$(Q)if [ ! -d include2 ]; then mkdir -p include2; fi;
- $(Q)ln -fsn $(srctree)/include/asm-$(ARCH) include2/asm
+ $(Q)ln -fsn $(srctree)/include/asm-$(SRCARCH) include2/asm
endif
# prepare2 creates a makefile if using a separate output directory
prepare2: prepare3 outputmakefile
-prepare1: prepare2 include/linux/version.h include/asm \
- include/config/MARKER
-ifneq ($(KBUILD_MODULES),)
- $(Q)rm -rf $(MODVERDIR)
- $(Q)mkdir -p $(MODVERDIR)
-endif
+prepare1: prepare2 include/linux/version.h include/linux/utsrelease.h \
+ include/asm include/config/auto.conf
+ $(cmd_crmodverdir)
archprepare: prepare1 scripts_basic
prepare0: archprepare FORCE
$(Q)$(MAKE) $(build)=.
+ $(Q)$(MAKE) $(build)=. missing-syscalls
# All the preparing..
-prepare prepare-all: prepare0
+prepare: prepare0
-# Leave this as default for preprocessing vmlinux.lds.S, which is now
-# done in arch/$(ARCH)/kernel/Makefile
+# Leave this as default for preprocessing vmlinux.lds.S, which is now
+# done in arch/$(ARCH)/kernel/Makefile
export CPPFLAGS_vmlinux.lds += -P -C -U$(ARCH)
-# Single targets
-# ---------------------------------------------------------------------------
-
-%.s: %.c scripts FORCE
- $(Q)$(MAKE) $(build)=$(@D) $@
-%.i: %.c scripts FORCE
- $(Q)$(MAKE) $(build)=$(@D) $@
-%.o: %.c scripts FORCE
- $(Q)$(MAKE) $(build)=$(@D) $@
-%.ko: scripts FORCE
- $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) $(build)=$(@D) $(@:.ko=.o)
- $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost
-%/: scripts prepare FORCE
- $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) $(build)=$(@D)
-%.lst: %.c scripts FORCE
- $(Q)$(MAKE) $(build)=$(@D) $@
-%.s: %.S scripts FORCE
- $(Q)$(MAKE) $(build)=$(@D) $@
-%.o: %.S scripts FORCE
- $(Q)$(MAKE) $(build)=$(@D) $@
-
-# FIXME: The asm symlink changes when $(ARCH) changes. That's
-# hard to detect, but I suppose "make mrproper" is a good idea
-# before switching between archs anyway.
-
-include/asm:
- @echo ' SYMLINK $@ -> include/asm-$(ARCH)'
- $(Q)if [ ! -d include ]; then mkdir -p include; fi;
- @ln -fsn asm-$(ARCH) $@
-
-# Split autoconf.h into include/linux/config/*
-
-include/config/MARKER: scripts/basic/split-include include/linux/autoconf.h
- @echo ' SPLIT include/linux/autoconf.h -> include/config/*'
- @scripts/basic/split-include include/linux/autoconf.h include/config
- @touch $@
+# The asm symlink changes when $(ARCH) changes.
+# Detect this and ask user to run make mrproper
+
+include/asm: FORCE
+ $(Q)set -e; asmlink=`readlink include/asm | cut -d '-' -f 2`; \
+ if [ -L include/asm ]; then \
+ if [ "$$asmlink" != "$(SRCARCH)" ]; then \
+ echo "ERROR: the symlink $@ points to asm-$$asmlink but asm-$(SRCARCH) was expected"; \
+ echo " set ARCH or save .config and run 'make mrproper' to fix it"; \
+ exit 1; \
+ fi; \
+ else \
+ echo ' SYMLINK $@ -> include/asm-$(SRCARCH)'; \
+ if [ ! -d include ]; then \
+ mkdir -p include; \
+ fi; \
+ ln -fsn asm-$(SRCARCH) $@; \
+ fi
# Generate some files
# ---------------------------------------------------------------------------
# needs to be updated, so this check is forced on all builds
uts_len := 64
+define filechk_utsrelease.h
+ if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \
+ echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2; \
+ exit 1; \
+ fi; \
+ (echo \#define UTS_RELEASE \"$(KERNELRELEASE)\";)
+endef
define filechk_version.h
- if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \
- echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2; \
- exit 1; \
- fi; \
- (echo \#define UTS_RELEASE \"$(KERNELRELEASE)\"; \
- echo \#define LINUX_VERSION_CODE `expr $(VERSION) \\* 65536 + $(PATCHLEVEL) \\* 256 + $(SUBLEVEL)`; \
- echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))'; \
- )
+ (echo \#define LINUX_VERSION_CODE $(shell \
+ expr $(VERSION) \* 65536 + $(PATCHLEVEL) \* 256 + $(SUBLEVEL)); \
+ echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';)
endef
include/linux/version.h: $(srctree)/Makefile FORCE
$(call filechk,version.h)
+include/linux/utsrelease.h: include/config/kernel.release FORCE
+ $(call filechk,utsrelease.h)
+
# ---------------------------------------------------------------------------
-.PHONY: depend dep
+PHONY += depend dep
depend dep:
@echo '*** Warning: make $@ is unnecessary now.'
# ---------------------------------------------------------------------------
+# Kernel headers
+INSTALL_HDR_PATH=$(objtree)/usr
+export INSTALL_HDR_PATH
+
+HDRFILTER=generic i386 x86_64
+HDRARCHES=$(filter-out $(HDRFILTER),$(patsubst $(srctree)/include/asm-%/Kbuild,%,$(wildcard $(srctree)/include/asm-*/Kbuild)))
+
+PHONY += headers_install_all
+headers_install_all: include/linux/version.h scripts_basic FORCE
+ $(Q)$(MAKE) $(build)=scripts scripts/unifdef
+ $(Q)for arch in $(HDRARCHES); do \
+ $(MAKE) ARCH=$$arch -f $(srctree)/scripts/Makefile.headersinst obj=include BIASMDIR=-bi-$$arch ;\
+ done
+
+PHONY += headers_install
+headers_install: include/linux/version.h scripts_basic FORCE
+ @if [ ! -r $(srctree)/include/asm-$(SRCARCH)/Kbuild ]; then \
+ echo '*** Error: Headers not exportable for this architecture ($(SRCARCH))'; \
+ exit 1 ; fi
+ $(Q)$(MAKE) $(build)=scripts scripts/unifdef
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.headersinst ARCH=$(SRCARCH) obj=include
+
+PHONY += headers_check_all
+headers_check_all: headers_install_all
+ $(Q)for arch in $(HDRARCHES); do \
+ $(MAKE) ARCH=$$arch -f $(srctree)/scripts/Makefile.headersinst obj=include BIASMDIR=-bi-$$arch HDRCHECK=1 ;\
+ done
+
+PHONY += headers_check
+headers_check: headers_install
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.headersinst ARCH=$(SRCARCH) obj=include HDRCHECK=1
+
+# ---------------------------------------------------------------------------
# Modules
ifdef CONFIG_MODULES
-# By default, build modules as well
+# By default, build modules as well
all: modules
# Build modules
+#
+# A module can be listed more than once in obj-m resulting in
+# duplicate lines in modules.order files. Those are removed
+# using awk while concatenating to the final file.
-.PHONY: modules
+PHONY += modules
modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux)
+ $(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.order) > $(objtree)/modules.order
@echo ' Building modules, stage 2.';
- $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
# Target to prepare building external modules
-.PHONY: modules_prepare
+PHONY += modules_prepare
modules_prepare: prepare scripts
# Target to install modules
-.PHONY: modules_install
+PHONY += modules_install
modules_install: _modinst_ _modinst_post
-.PHONY: _modinst_
+PHONY += _modinst_
_modinst_:
@if [ -z "`$(DEPMOD) -V 2>/dev/null | grep module-init-tools`" ]; then \
echo "Warning: you may need to install module-init-tools"; \
rm -f $(MODLIB)/build ; \
ln -s $(objtree) $(MODLIB)/build ; \
fi
- $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modinst
+ @cp -f $(objtree)/modules.order $(MODLIB)/
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
-# If System.map exists, run depmod. This deliberately does not have a
-# dependency on System.map since that would run the dependency tree on
-# vmlinux. This depmod is only for convenience to give the initial
+# This depmod is only for convenience to give the initial
# boot a modules.dep even before / is mounted read-write. However the
# boot script depmod is the master version.
-ifeq "$(strip $(INSTALL_MOD_PATH))" ""
-depmod_opts :=
-else
-depmod_opts := -b $(INSTALL_MOD_PATH) -r
-endif
-.PHONY: _modinst_post
+PHONY += _modinst_post
_modinst_post: _modinst_
- if [ -r System.map -a -x $(DEPMOD) ]; then $(DEPMOD) -ae -F System.map $(depmod_opts) $(KERNELRELEASE); fi
+ $(call cmd,depmod)
else # CONFIG_MODULES
.tmp_kallsyms* .tmp_version .tmp_vmlinux* .tmp_System.map
# Directories & files removed with 'make mrproper'
-MRPROPER_DIRS += include/config include2
-MRPROPER_FILES += .config .config.old include/asm .version \
- include/linux/autoconf.h include/linux/version.h \
- Module.symvers tags TAGS cscope*
+MRPROPER_DIRS += include/config include2 usr/include
+MRPROPER_FILES += .config .config.old include/asm .version .old_version \
+ include/linux/autoconf.h include/linux/version.h \
+ include/linux/utsrelease.h \
+ Module.symvers tags TAGS cscope*
# clean - Delete most, but leave enough to build external modules
#
clean: rm-files := $(CLEAN_FILES)
clean-dirs := $(addprefix _clean_,$(srctree) $(vmlinux-alldirs))
-.PHONY: $(clean-dirs) clean archclean
+PHONY += $(clean-dirs) clean archclean
$(clean-dirs):
$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
$(call cmd,rmdirs)
$(call cmd,rmfiles)
@find . $(RCS_FIND_IGNORE) \
- \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
- -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \) \
+ \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
+ -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
+ -o -name '*.symtypes' -o -name 'modules.order' \) \
-type f -print | xargs rm -f
# mrproper - Delete all generated files, including .config
mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
mrproper-dirs := $(addprefix _mrproper_,Documentation/DocBook scripts)
-.PHONY: $(mrproper-dirs) mrproper archmrproper
+PHONY += $(mrproper-dirs) mrproper archmrproper
$(mrproper-dirs):
$(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
# distclean
#
-.PHONY: distclean
+PHONY += distclean
distclean: mrproper
@find $(srctree) $(RCS_FIND_IGNORE) \
- \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
+ \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
-o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
- -o -name '.*.rej' -o -size 0 \
+ -o -name '.*.rej' -o -size 0 \
-o -name '*%' -o -name '.*.cmd' -o -name 'core' \) \
-type f -print | xargs rm -f
# rpm target kept for backward compatibility
package-dir := $(srctree)/scripts/package
-.PHONY: %-pkg rpm
-
-%pkg: FORCE
- $(Q)$(MAKE) -f $(package-dir)/Makefile $@
-rpm: FORCE
- $(Q)$(MAKE) -f $(package-dir)/Makefile $@
+%pkg: include/config/kernel.release FORCE
+ $(Q)$(MAKE) $(build)=$(package-dir) $@
+rpm: include/config/kernel.release FORCE
+ $(Q)$(MAKE) $(build)=$(package-dir) $@
# Brief documentation of the typical targets used
# ---------------------------------------------------------------------------
-boards := $(wildcard $(srctree)/arch/$(ARCH)/configs/*_defconfig)
+boards := $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*_defconfig)
boards := $(notdir $(boards))
+board-dirs := $(dir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*/*_defconfig))
+board-dirs := $(sort $(notdir $(board-dirs:/=)))
help:
@echo 'Cleaning targets:'
- @echo ' clean - remove most generated files but keep the config'
- @echo ' mrproper - remove all generated files + config + various backup files'
+ @echo ' clean - Remove most generated files but keep the config and'
+ @echo ' enough build support to build external modules'
+ @echo ' mrproper - Remove all generated files + config + various backup files'
+ @echo ' distclean - mrproper + remove editor backup and patch files'
@echo ''
@echo 'Configuration targets:'
@$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
@echo ' all - Build all targets marked with [*]'
@echo '* vmlinux - Build the bare kernel'
@echo '* modules - Build all modules'
- @echo ' modules_install - Install all modules'
+ @echo ' modules_install - Install all modules to INSTALL_MOD_PATH (default: /)'
@echo ' dir/ - Build all files in dir and below'
@echo ' dir/file.[ois] - Build specified target only'
@echo ' dir/file.ko - Build module including final link'
- @echo ' rpm - Build a kernel as an RPM package'
+ @echo ' prepare - Set up for building external modules'
@echo ' tags/TAGS - Generate tags file for editors'
@echo ' cscope - Generate cscope index'
@echo ' kernelrelease - Output the release version string'
+ @echo ' kernelversion - Output the version stored in Makefile'
+ @if [ -r $(srctree)/include/asm-$(SRCARCH)/Kbuild ]; then \
+ echo ' headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \
+ echo ' (default: $(INSTALL_HDR_PATH))'; \
+ fi
@echo ''
@echo 'Static analysers'
- @echo ' buildcheck - List dangling references to vmlinux discarded sections'
- @echo ' and init sections from non-init sections'
@echo ' checkstack - Generate a list of stack hogs'
@echo ' namespacecheck - Name space analysis on compiled kernel'
+ @echo ' versioncheck - Sanity check on version.h usage'
+ @echo ' includecheck - Check for duplicate included header files'
+ @echo ' export_report - List the usages of all exported symbols'
+ @if [ -r $(srctree)/include/asm-$(SRCARCH)/Kbuild ]; then \
+ echo ' headers_check - Sanity check on exported headers'; \
+ fi
@echo ''
@echo 'Kernel packaging:'
- @$(MAKE) -f $(package-dir)/Makefile help
+ @$(MAKE) $(build)=$(package-dir) help
@echo ''
@echo 'Documentation targets:'
@$(MAKE) -f $(srctree)/Documentation/DocBook/Makefile dochelp
@echo ''
- @echo 'Architecture specific targets ($(ARCH)):'
+ @echo 'Architecture specific targets ($(SRCARCH)):'
@$(if $(archhelp),$(archhelp),\
- echo ' No architecture specific help defined for $(ARCH)')
+ echo ' No architecture specific help defined for $(SRCARCH)')
@echo ''
@$(if $(boards), \
$(foreach b, $(boards), \
printf " %-24s - Build for %s\\n" $(b) $(subst _defconfig,,$(b));) \
echo '')
+ @$(if $(board-dirs), \
+ $(foreach b, $(board-dirs), \
+ printf " %-16s - Show %s-specific targets\\n" help-$(b) $(b);) \
+ printf " %-16s - Show all of the above\\n" help-boards; \
+ echo '')
@echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
+ @echo ' make V=2 [targets] 2 => give reason for rebuild of target'
@echo ' make O=dir [targets] Locate all output files in "dir", including .config'
- @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse)'
- @echo ' make C=2 [targets] Force check of all c source with $$CHECK (sparse)'
+ @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse by default)'
+ @echo ' make C=2 [targets] Force check of all c source with $$CHECK'
@echo ''
@echo 'Execute "make" or "make all" to build all targets marked with [*] '
@echo 'For further info see the ./README file'
+help-board-dirs := $(addprefix help-,$(board-dirs))
+
+help-boards: $(help-board-dirs)
+
+boards-per-dir = $(notdir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/$*/*_defconfig))
+
+$(help-board-dirs): help-%:
+ @echo 'Architecture specific targets ($(SRCARCH) $*):'
+ @$(if $(boards-per-dir), \
+ $(foreach b, $(boards-per-dir), \
+ printf " %-24s - Build for %s\\n" $*/$(b) $(subst _defconfig,,$(b));) \
+ echo '')
+
+
# Documentation targets
# ---------------------------------------------------------------------------
%docs: scripts_basic FORCE
# make M=dir modules Make all modules in specified dir
# make M=dir Same as 'make M=dir modules'
# make M=dir modules_install
-# Install the modules build in the module directory
+# Install the modules built in the module directory
# Assumes install directory is already created
# We are always building modules
KBUILD_MODULES := 1
-.PHONY: crmodverdir
+PHONY += crmodverdir
crmodverdir:
- $(Q)mkdir -p $(MODVERDIR)
+ $(cmd_crmodverdir)
-.PHONY: $(objtree)/Module.symvers
+PHONY += $(objtree)/Module.symvers
$(objtree)/Module.symvers:
@test -e $(objtree)/Module.symvers || ( \
echo; \
echo )
module-dirs := $(addprefix _module_,$(KBUILD_EXTMOD))
-.PHONY: $(module-dirs) modules
+PHONY += $(module-dirs) modules
$(module-dirs): crmodverdir $(objtree)/Module.symvers
$(Q)$(MAKE) $(build)=$(patsubst _module_%,%,$@)
modules: $(module-dirs)
@echo ' Building modules, stage 2.';
- $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
+
+PHONY += modules_install
+modules_install: _emodinst_ _emodinst_post
-.PHONY: modules_install
-modules_install:
- $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modinst
+install-dir := $(if $(INSTALL_MOD_DIR),$(INSTALL_MOD_DIR),extra)
+PHONY += _emodinst_
+_emodinst_:
+ $(Q)mkdir -p $(MODLIB)/$(install-dir)
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
+
+PHONY += _emodinst_post
+_emodinst_post: _emodinst_
+ $(call cmd,depmod)
clean-dirs := $(addprefix _clean_,$(KBUILD_EXTMOD))
-.PHONY: $(clean-dirs) clean
+PHONY += $(clean-dirs) clean
$(clean-dirs):
$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
clean: rm-dirs := $(MODVERDIR)
+clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers
clean: $(clean-dirs)
$(call cmd,rmdirs)
+ $(call cmd,rmfiles)
@find $(KBUILD_EXTMOD) $(RCS_FIND_IGNORE) \
- \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
+ \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \) \
-type f -print | xargs rm -f
@echo ' modules_install - install the module'
@echo ' clean - remove generated files in module directory only'
@echo ''
+
+# Dummies...
+PHONY += prepare scripts
+prepare: ;
+scripts: ;
endif # KBUILD_EXTMOD
# Generate tags for editors
ifeq ($(ARCH),um)
ALLINCLUDE_ARCHS := $(ARCH) $(SUBARCH)
else
-ALLINCLUDE_ARCHS := $(ARCH)
+ALLINCLUDE_ARCHS := $(SRCARCH)
endif
else
#Allow user to specify only ALLSOURCE_PATHS on the command line, keeping existing behaviour.
ALLINCLUDE_ARCHS := $(ALLSOURCE_ARCHS)
endif
-ALLSOURCE_ARCHS := $(ARCH)
+ALLSOURCE_ARCHS := $(SRCARCH)
-define all-sources
- ( find $(__srctree) $(RCS_FIND_IGNORE) \
- \( -name include -o -name arch \) -prune -o \
- -name '*.[chS]' -print; \
- for ARCH in $(ALLSOURCE_ARCHS) ; do \
- find $(__srctree)arch/$${ARCH} $(RCS_FIND_IGNORE) \
- -name '*.[chS]' -print; \
+define find-sources
+ ( for arch in $(ALLSOURCE_ARCHS) ; do \
+ find $(__srctree)arch/$${arch} $(RCS_FIND_IGNORE) \
+ -name $1 -print; \
done ; \
find $(__srctree)security/selinux/include $(RCS_FIND_IGNORE) \
- -name '*.[chS]' -print; \
+ -name $1 -print; \
find $(__srctree)include $(RCS_FIND_IGNORE) \
\( -name config -o -name 'asm-*' \) -prune \
- -o -name '*.[chS]' -print; \
- for ARCH in $(ALLINCLUDE_ARCHS) ; do \
- find $(__srctree)include/asm-$${ARCH} $(RCS_FIND_IGNORE) \
- -name '*.[chS]' -print; \
+ -o -name $1 -print; \
+ for arch in $(ALLINCLUDE_ARCHS) ; do \
+ find $(__srctree)include/asm-$${arch} $(RCS_FIND_IGNORE) \
+ -name $1 -print; \
done ; \
find $(__srctree)include/asm-generic $(RCS_FIND_IGNORE) \
- -name '*.[chS]' -print )
+ -name $1 -print; \
+ find $(__srctree) $(RCS_FIND_IGNORE) \
+ \( -name include -o -name arch -o -name '.tmp_*' \) -prune -o \
+ -name $1 -print; \
+ )
+endef
+
+define all-sources
+ $(call find-sources,'*.[chS]')
+endef
+define all-kconfigs
+ $(call find-sources,'Kconfig*')
+endef
+define all-defconfigs
+ $(call find-sources,'defconfig')
+endef
+
+define xtags
+ if $1 --version 2>&1 | grep -iq exuberant; then \
+ $(all-sources) | xargs $1 -a \
+ -I __initdata,__exitdata,__acquires,__releases \
+ -I __read_mostly,____cacheline_aligned,____cacheline_aligned_in_smp,____cacheline_internodealigned_in_smp \
+ -I EXPORT_SYMBOL,EXPORT_SYMBOL_GPL \
+ --extra=+f --c-kinds=+px \
+ --regex-asm='/^ENTRY\(([^)]*)\).*/\1/'; \
+ $(all-kconfigs) | xargs $1 -a \
+ --langdef=kconfig \
+ --language-force=kconfig \
+ --regex-kconfig='/^[[:blank:]]*(menu|)config[[:blank:]]+([[:alnum:]_]+)/\2/'; \
+ $(all-defconfigs) | xargs -r $1 -a \
+ --langdef=dotconfig \
+ --language-force=dotconfig \
+ --regex-dotconfig='/^#?[[:blank:]]*(CONFIG_[[:alnum:]_]+)/\1/'; \
+ elif $1 --version 2>&1 | grep -iq emacs; then \
+ $(all-sources) | xargs $1 -a; \
+ $(all-kconfigs) | xargs $1 -a \
+ --regex='/^[ \t]*(menu|)config[ \t]+\([a-zA-Z0-9_]+\)/\2/'; \
+ $(all-defconfigs) | xargs -r $1 -a \
+ --regex='/^#?[ \t]?\(CONFIG_[a-zA-Z0-9_]+\)/\1/'; \
+ else \
+ $(all-sources) | xargs $1 -a; \
+ fi
endef
quiet_cmd_cscope-file = FILELST cscope.files
quiet_cmd_TAGS = MAKE $@
define cmd_TAGS
rm -f $@; \
- ETAGSF=`etags --version | grep -i exuberant >/dev/null && echo "-I __initdata,__exitdata,EXPORT_SYMBOL,EXPORT_SYMBOL_GPL --extra=+f"`; \
- $(all-sources) | xargs etags $$ETAGSF -a
+ $(call xtags,etags)
endef
TAGS: FORCE
$(call cmd,TAGS)
-
quiet_cmd_tags = MAKE $@
define cmd_tags
rm -f $@; \
- CTAGSF=`ctags --version | grep -i exuberant >/dev/null && echo "-I __initdata,__exitdata,EXPORT_SYMBOL,EXPORT_SYMBOL_GPL --extra=+f"`; \
- $(all-sources) | xargs ctags $$CTAGSF -a
+ $(call xtags,ctags)
endef
tags: FORCE
includecheck:
find * $(RCS_FIND_IGNORE) \
-name '*.[hcS]' -type f -print | sort \
- | xargs $(PERL) -w scripts/checkincludes.pl
+ | xargs $(PERL) -w $(srctree)/scripts/checkincludes.pl
versioncheck:
find * $(RCS_FIND_IGNORE) \
-name '*.[hcS]' -type f -print | sort \
- | xargs $(PERL) -w scripts/checkversion.pl
-
-buildcheck:
- $(PERL) $(srctree)/scripts/reference_discarded.pl
- $(PERL) $(srctree)/scripts/reference_init.pl
+ | xargs $(PERL) -w $(srctree)/scripts/checkversion.pl
namespacecheck:
$(PERL) $(srctree)/scripts/namespace.pl
+export_report:
+ $(PERL) $(srctree)/scripts/export_report.pl
+
endif #ifeq ($(config-targets),1)
endif #ifeq ($(mixed-targets),1)
-.PHONY: checkstack
+PHONY += checkstack kernelrelease kernelversion
+
+# UML needs a little special treatment here. It wants to use the host
+# toolchain, so needs $(SUBARCH) passed to checkstack.pl. Everyone
+# else wants $(ARCH), including people doing cross-builds, which means
+# that $(SUBARCH) doesn't work here.
+ifeq ($(ARCH), um)
+CHECKSTACK_ARCH := $(SUBARCH)
+else
+CHECKSTACK_ARCH := $(ARCH)
+endif
checkstack:
$(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \
- $(PERL) $(src)/scripts/checkstack.pl $(ARCH)
+ $(PERL) $(src)/scripts/checkstack.pl $(CHECKSTACK_ARCH)
kernelrelease:
- @echo $(KERNELRELEASE)
+ $(if $(wildcard include/config/kernel.release), $(Q)echo $(KERNELRELEASE), \
+ $(error kernelrelease not valid - run 'make prepare' to update it))
+kernelversion:
+ @echo $(KERNELVERSION)
+
+# Single targets
+# ---------------------------------------------------------------------------
+# Single targets are compatible with:
+# - build with mixed source and output
+# - build with separate output dir 'make O=...'
+# - external modules
+#
+# target-dir => where to store outputfile
+# build-dir => directory in kernel source tree to use
+
+ifeq ($(KBUILD_EXTMOD),)
+ build-dir = $(patsubst %/,%,$(dir $@))
+ target-dir = $(dir $@)
+else
+ zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
+ build-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
+ target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
+endif
+
+%.s: %.c prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.i: %.c prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.o: %.c prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.lst: %.c prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.s: %.S prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.o: %.S prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.symtypes: %.c prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+
+# Modules
+/ %/: prepare scripts FORCE
+ $(cmd_crmodverdir)
+ $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
+ $(build)=$(build-dir)
+%.ko: prepare scripts FORCE
+ $(cmd_crmodverdir)
+ $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
+ $(build)=$(build-dir) $(@:.ko=.o)
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
# FIXME Should go into a make.lib or something
# ===========================================================================
quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files)))
cmd_rmfiles = rm -f $(rm-files)
+# Run depmod only if we have System.map and depmod is executable
+quiet_cmd_depmod = DEPMOD $(KERNELRELEASE)
+ cmd_depmod = \
+ if [ -r System.map -a -x $(DEPMOD) ]; then \
+ $(DEPMOD) -ae -F System.map \
+ $(if $(strip $(INSTALL_MOD_PATH)), -b $(INSTALL_MOD_PATH) -r) \
+ $(KERNELRELEASE); \
+ fi
+
+# Create temporary dir for module support files
+# clean it up only when building all modules
+cmd_crmodverdir = $(Q)mkdir -p $(MODVERDIR) \
+ $(if $(KBUILD_MODULES),; rm -f $(MODVERDIR)/*)
-a_flags = -Wp,-MD,$(depfile) $(AFLAGS) $(AFLAGS_KERNEL) \
- $(NOSTDINC_FLAGS) $(CPPFLAGS) \
- $(modkern_aflags) $(EXTRA_AFLAGS) $(AFLAGS_$(*F).o)
+a_flags = -Wp,-MD,$(depfile) $(KBUILD_AFLAGS) $(AFLAGS_KERNEL) \
+ $(NOSTDINC_FLAGS) $(KBUILD_CPPFLAGS) \
+ $(modkern_aflags) $(EXTRA_AFLAGS) $(AFLAGS_$(basetarget).o)
quiet_cmd_as_o_S = AS $@
cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $<
endif # skip-makefile
+PHONY += FORCE
FORCE:
+
+# Declare the contents of the .PHONY variable as phony. We keep that
+# information in a variable se we can use it in if_changed and friends.
+.PHONY: $(PHONY)
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff