Currently the driver can handle up to 256 different serial interfaces at
one time.
- If you are not using devfs:
The major number that the driver uses is 188 so to use the driver,
create the following nodes:
mknod /dev/ttyUSB0 c 188 0
mknod /dev/ttyUSB254 c 188 254
mknod /dev/ttyUSB255 c 188 255
- If you are using devfs:
- The devices supported by this driver will show up as
- /dev/usb/tts/{0,1,...}
-
When the device is connected and recognized by the driver, the driver
will print to the system log, which node(s) the device has been bound
to.
http://www.connecttech.com
For any questions or problems with this driver, please contact
- Stuart MacDonald at stuartm@connecttech.com
+ Connect Tech's Support Department at support@connecttech.com
-HandSpring Visor, Palm USB, and Clié USB driver
+HandSpring Visor, Palm USB, and Clié USB driver
- This driver works with all HandSpring USB, Palm USB, and Sony Clié USB
+ This driver works with all HandSpring USB, Palm USB, and Sony Clié USB
devices.
Only when the device tries to connect to the host, will the device show
the port to use for the HotSync transfer. The "Generic" port can be used
for other device communication, such as a PPP link.
- For some Sony Clié devices, /dev/ttyUSB0 must be used to talk to the
+ For some Sony Clié devices, /dev/ttyUSB0 must be used to talk to the
device. This is true for all OS version 3.5 devices, and most devices
that have had a flash upgrade to a newer version of the OS. See the
kernel system log for information on which is the correct port to use.
Current status:
The USA-18X, USA-28X, USA-19, USA-19W and USA-49W are supported and
- have been pretty throughly tested at various baud rates with 8-N-1
+ have been pretty thoroughly tested at various baud rates with 8-N-1
character settings. Other character lengths and parity setups are
presently untested.
FTDI Single Port Serial Driver
- This is a single port DB-25 serial adapter. More information about this
- device and the Linux driver can be found at:
- http://reality.sgi.com/bryder_wellington/ftdi_sio/
+ This is a single port DB-25 serial adapter.
- For any questions or problems with this driver, please contact Bill Ryder
- at bryder@sgi.com
+ For any questions or problems with this driver, please contact Bill Ryder.
ZyXEL omni.net lcd plus ISDN TA
-Cypress HID->COM RS232 adapter
Note: Cypress Semiconductor claims no affiliation with the
- the hid->com device.
+ hid->com device.
Most devices using chipsets under the CY4601 family should
work with the driver. As long as they stay true to the CY4601
together without hacking the adapter to set the line high.
The driver is smp safe. Performance with the driver is rather low when using
- it for transfering files. This is being worked on, but I would be willing to
+ it for transferring files. This is being worked on, but I would be willing to
accept patches. An urb queue or packet buffer would likely fit the bill here.
If you have any questions, problems, patches, feature requests, etc. you can
work under SMP with the uhci driver.
The driver is generally working, though we still have a few more ioctls
- to implement and final testing and debugging to do. The paralled port
+ to implement and final testing and debugging to do. The parallel port
on the USB 2 is supported as a serial to parallel converter; in other
words, it appears as another USB serial port on Linux, even though
physically it is really a parallel port. The Digi Acceleport USB 8
Parity N,E,O,M,S
Handshake None, Software (XON/XOFF), Hardware (CTSRTS,CTSDTR)*
Break Set and clear
- Line contrl Input/Output query and control **
+ Line control Input/Output query and control **
* Hardware input flow control is only enabled for firmware
levels above 2.06. Read source code comments describing Belkin
automatic hardware flow control.
TO DO List:
- -- Add true modem contol line query capability. Currently tracks the
+ -- Add true modem control line query capability. Currently tracks the
states reported by the interrupt and the states requested.
-- Add error reporting back to application for UART error conditions.
-- Add support for flush ioctls.
This driver is for the MCT USB-RS232 Converter (25 pin, Model No.
U232-P25) from Magic Control Technology Corp. (there is also a 9 pin
Model No. U232-P9). More information about this device can be found at
- the manufacture's web-site: http://www.mct.com.tw.
+ the manufacturer's web-site: http://www.mct.com.tw.
The driver is generally working, though it still needs some more testing.
It is derived from the Belkin USB Serial Adapter F5U103 driver and its
debug - extra verbose debugging info
(default: 0; nonzero enables)
use_lowlatency - use low_latency flag to speed up tty layer
- when reading from from the device.
+ when reading from the device.
(default: 0; nonzero enables)
See http://www.uuhaus.de/linux/palmconnect.html for up-to-date
information on this driver.
+Winchiphead CH341 Driver
+
+ This driver is for the Winchiphead CH341 USB-RS232 Converter. This chip
+ also implements an IEEE 1284 parallel port, I2C and SPI, but that is not
+ supported by the driver. The protocol was analyzed from the behaviour
+ of the Windows driver, no datasheet is available at present.
+ The manufacturer's website: http://www.winchiphead.com/.
+ For any questions or problems with this driver, please contact
+ frank@kingswood-consulting.co.uk.
+
Generic Serial driver
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff