http://www.connecttech.com
For any questions or problems with this driver, please contact
- Stuart MacDonald at stuartm@connecttech.com
+ Connect Tech's Support Department at support@connecttech.com
-HandSpring Visor, Palm USB, and Clié USB driver
+HandSpring Visor, Palm USB, and Clié USB driver
- This driver works with all HandSpring USB, Palm USB, and Sony Clié USB
+ This driver works with all HandSpring USB, Palm USB, and Sony Clié USB
devices.
Only when the device tries to connect to the host, will the device show
the port to use for the HotSync transfer. The "Generic" port can be used
for other device communication, such as a PPP link.
- For some Sony Clié devices, /dev/ttyUSB0 must be used to talk to the
+ For some Sony Clié devices, /dev/ttyUSB0 must be used to talk to the
device. This is true for all OS version 3.5 devices, and most devices
that have had a flash upgrade to a newer version of the OS. See the
kernel system log for information on which is the correct port to use.
Current status:
The USA-18X, USA-28X, USA-19, USA-19W and USA-49W are supported and
- have been pretty throughly tested at various baud rates with 8-N-1
+ have been pretty thoroughly tested at various baud rates with 8-N-1
character settings. Other character lengths and parity setups are
presently untested.
FTDI Single Port Serial Driver
- This is a single port DB-25 serial adapter. More information about this
- device and the Linux driver can be found at:
- http://reality.sgi.com/bryder_wellington/ftdi_sio/
+ This is a single port DB-25 serial adapter.
- For any questions or problems with this driver, please contact Bill Ryder
- at bryder@sgi.com
+ Devices supported include:
+ -TripNav TN-200 USB GPS
+ -Navis Engineering Bureau CH-4711 USB GPS
+
+ For any questions or problems with this driver, please contact Bill Ryder.
ZyXEL omni.net lcd plus ISDN TA
Devices supported:
- -DeLorme's USB Earthmate (SiRF Star II lp arch)
+ -DeLorme's USB Earthmate GPS (SiRF Star II lp arch)
-Cypress HID->COM RS232 adapter
Note: Cypress Semiconductor claims no affiliation with the
together without hacking the adapter to set the line high.
The driver is smp safe. Performance with the driver is rather low when using
- it for transfering files. This is being worked on, but I would be willing to
+ it for transferring files. This is being worked on, but I would be willing to
accept patches. An urb queue or packet buffer would likely fit the bill here.
If you have any questions, problems, patches, feature requests, etc. you can
Parity N,E,O,M,S
Handshake None, Software (XON/XOFF), Hardware (CTSRTS,CTSDTR)*
Break Set and clear
- Line contrl Input/Output query and control **
+ Line control Input/Output query and control **
* Hardware input flow control is only enabled for firmware
levels above 2.06. Read source code comments describing Belkin
automatic hardware flow control.
TO DO List:
- -- Add true modem contol line query capability. Currently tracks the
+ -- Add true modem control line query capability. Currently tracks the
states reported by the interrupt and the states requested.
-- Add error reporting back to application for UART error conditions.
-- Add support for flush ioctls.
This driver is for the MCT USB-RS232 Converter (25 pin, Model No.
U232-P25) from Magic Control Technology Corp. (there is also a 9 pin
Model No. U232-P9). More information about this device can be found at
- the manufacture's web-site: http://www.mct.com.tw.
+ the manufacturer's web-site: http://www.mct.com.tw.
The driver is generally working, though it still needs some more testing.
It is derived from the Belkin USB Serial Adapter F5U103 driver and its
Prolific PL2303 Driver
This driver supports any device that has the PL2303 chip from Prolific
- in it. This includes a number of single port USB to serial
- converters and USB GPS devices. Devices from Aten (the UC-232) and
- IO-Data work with this driver, as does the DCU-11 mobile-phone cable.
+ in it. This includes a number of single port USB to serial converters,
+ more than 70% of USB GPS devices (in 2010), and some USB UPSes. Devices
+ from Aten (the UC-232) and IO-Data work with this driver, as does
+ the DCU-11 mobile-phone cable.
For any questions or problems with this driver, please contact Greg
Kroah-Hartman at greg@kroah.com
See http://www.uuhaus.de/linux/palmconnect.html for up-to-date
information on this driver.
-AIRcable USB Dongle Bluetooth driver
- If there is the cdc_acm driver loaded in the system, you will find that the
- cdc_acm claims the device before AIRcable can. This is simply corrected
- by unloading both modules and then loading the aircable module before
- cdc_acm module
+Winchiphead CH341 Driver
+
+ This driver is for the Winchiphead CH341 USB-RS232 Converter. This chip
+ also implements an IEEE 1284 parallel port, I2C and SPI, but that is not
+ supported by the driver. The protocol was analyzed from the behaviour
+ of the Windows driver, no datasheet is available at present.
+ The manufacturer's website: http://www.winchiphead.com/.
+ For any questions or problems with this driver, please contact
+ frank@kingswood-consulting.co.uk.
+
+Moschip MCS7720, MCS7715 driver
+
+ These chips are present in devices sold by various manufacturers, such as Syba
+ and Cables Unlimited. There may be others. The 7720 provides two serial
+ ports, and the 7715 provides one serial and one standard PC parallel port.
+ Support for the 7715's parallel port is enabled by a separate option, which
+ will not appear unless parallel port support is first enabled at the top-level
+ of the Device Drivers config menu. Currently only compatibility mode is
+ supported on the parallel port (no ECP/EPP).
+
+ TODO:
+ - Implement ECP/EPP modes for the parallel port.
+ - Baud rates higher than 115200 are currently broken.
+ - Devices with a single serial port based on the Moschip MCS7703 may work
+ with this driver with a simple addition to the usb_device_id table. I
+ don't have one of these devices, so I can't say for sure.
Generic Serial driver