/*P:100 This is the Launcher code, a simple program which lays out the
- * "physical" memory for the new Guest by mapping the kernel image and the
- * virtual devices, then reads repeatedly from /dev/lguest to run the Guest.
-:*/
+ * "physical" memory for the new Guest by mapping the kernel image and
+ * the virtual devices, then opens /dev/lguest to tell the kernel
+ * about the Guest and control it. :*/
#define _LARGEFILE64_SOURCE
#define _GNU_SOURCE
#include <stdio.h>
#include <zlib.h>
#include <assert.h>
#include <sched.h>
+#include <limits.h>
+#include <stddef.h>
+#include <signal.h>
#include "linux/lguest_launcher.h"
#include "linux/virtio_config.h"
#include "linux/virtio_net.h"
#include "linux/virtio_blk.h"
#include "linux/virtio_console.h"
+#include "linux/virtio_rng.h"
#include "linux/virtio_ring.h"
-#include "asm-x86/bootparam.h"
-/*L:110 We can ignore the 38 include files we need for this program, but I do
+#include "asm/bootparam.h"
+/*L:110 We can ignore the 39 include files we need for this program, but I do
* want to draw attention to the use of kernel-style types.
*
* As Linus said, "C is a Spartan language, and so should your naming be." I
#endif
/* We can have up to 256 pages for devices. */
#define DEVICE_PAGES 256
-/* This will occupy 2 pages: it must be a power of 2. */
-#define VIRTQUEUE_NUM 128
+/* This will occupy 3 pages: it must be a power of 2. */
+#define VIRTQUEUE_NUM 256
/*L:120 verbose is both a global flag and a macro. The C preprocessor allows
* this, and although I wouldn't recommend it, it works quite nicely here. */
do { if (verbose) printf(args); } while(0)
/*:*/
-/* The pipe to send commands to the waker process */
-static int waker_fd;
+/* File descriptors for the Waker. */
+struct {
+ int pipe[2];
+ int lguest_fd;
+} waker_fds;
+
/* The pointer to the start of guest memory. */
static void *guest_base;
/* The maximum guest physical address allowed, and maximum possible. */
static unsigned long guest_limit, guest_max;
+/* The pipe for signal hander to write to. */
+static int timeoutpipe[2];
+static unsigned int timeout_usec = 500;
/* a per-cpu variable indicating whose vcpu is currently running */
static unsigned int __thread cpu_id;
/* The descriptor page for the devices. */
u8 *descpage;
- /* The tail of the last descriptor. */
- unsigned int desc_used;
-
/* A single linked list of devices. */
struct device *dev;
- /* ... And an end pointer so we can easily append new devices */
- struct device **lastdev;
+ /* And a pointer to the last device for easy append and also for
+ * configuration appending. */
+ struct device *lastdev;
};
/* The list of Guest devices, based on command line arguments. */
/* Any queues attached to this device */
struct virtqueue *vq;
+ /* Handle status being finalized (ie. feature bits stable). */
+ void (*ready)(struct device *me);
+
/* Device-specific data. */
void *priv;
};
/* Last available index we saw. */
u16 last_avail_idx;
- /* The routine to call when the Guest pings us. */
- void (*handle_output)(int fd, struct virtqueue *me);
+ /* The routine to call when the Guest pings us, or timeout. */
+ void (*handle_output)(int fd, struct virtqueue *me, bool timeout);
+
+ /* Outstanding buffers */
+ unsigned int inflight;
+
+ /* Is this blocked awaiting a timer? */
+ bool blocked;
};
/* Remember the arguments to the program so we can "reboot" */
return iov->iov_base;
}
+/* Wrapper for the last available index. Makes it easier to change. */
+#define lg_last_avail(vq) ((vq)->last_avail_idx)
+
/* The virtio configuration space is defined to be little-endian. x86 is
* little-endian too, but it's nice to be explicit so we have these helpers. */
#define cpu_to_le16(v16) (v16)
#define cpu_to_le64(v64) (v64)
#define le16_to_cpu(v16) (v16)
#define le32_to_cpu(v32) (v32)
-#define le64_to_cpu(v32) (v64)
+#define le64_to_cpu(v64) (v64)
+
+/* Is this iovec empty? */
+static bool iov_empty(const struct iovec iov[], unsigned int num_iov)
+{
+ unsigned int i;
+
+ for (i = 0; i < num_iov; i++)
+ if (iov[i].iov_len)
+ return false;
+ return true;
+}
+
+/* Take len bytes from the front of this iovec. */
+static void iov_consume(struct iovec iov[], unsigned num_iov, unsigned len)
+{
+ unsigned int i;
+
+ for (i = 0; i < num_iov; i++) {
+ unsigned int used;
+
+ used = iov[i].iov_len < len ? iov[i].iov_len : len;
+ iov[i].iov_base += used;
+ iov[i].iov_len -= used;
+ len -= used;
+ }
+ assert(len == 0);
+}
+
+/* The device virtqueue descriptors are followed by feature bitmasks. */
+static u8 *get_feature_bits(struct device *dev)
+{
+ return (u8 *)(dev->desc + 1)
+ + dev->desc->num_vq * sizeof(struct lguest_vqconfig);
+}
/*L:100 The Launcher code itself takes us out into userspace, that scary place
* where pointers run wild and free! Unfortunately, like most userspace
PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE, fd, 0);
if (addr == MAP_FAILED)
err(1, "Mmaping %u pages of /dev/zero", num);
+ close(fd);
return addr;
}
err(1, "Reading program headers");
/* Try all the headers: there are usually only three. A read-only one,
- * a read-write one, and a "note" section which isn't loadable. */
+ * a read-write one, and a "note" section which we don't load. */
for (i = 0; i < ehdr->e_phnum; i++) {
/* If this isn't a loadable segment, we ignore it */
if (phdr[i].p_type != PT_LOAD)
void *p = from_guest_phys(0x100000);
/* Go back to the start of the file and read the header. It should be
- * a Linux boot header (see Documentation/i386/boot.txt) */
+ * a Linux boot header (see Documentation/x86/i386/boot.txt) */
lseek(fd, 0, SEEK_SET);
read(fd, &boot, sizeof(boot));
if (memcmp(hdr.e_ident, ELFMAG, SELFMAG) == 0)
return map_elf(fd, &hdr);
- /* Otherwise we assume it's a bzImage, and try to unpack it */
+ /* Otherwise we assume it's a bzImage, and try to load it. */
return load_bzimage(fd);
}
/* We return the initrd size. */
return len;
}
-
-/* Once we know how much memory we have, we can construct simple linear page
- * tables which set virtual == physical which will get the Guest far enough
- * into the boot to create its own.
- *
- * We lay them out of the way, just below the initrd (which is why we need to
- * know its size). */
-static unsigned long setup_pagetables(unsigned long mem,
- unsigned long initrd_size)
-{
- unsigned long *pgdir, *linear;
- unsigned int mapped_pages, i, linear_pages;
- unsigned int ptes_per_page = getpagesize()/sizeof(void *);
-
- mapped_pages = mem/getpagesize();
-
- /* Each PTE page can map ptes_per_page pages: how many do we need? */
- linear_pages = (mapped_pages + ptes_per_page-1)/ptes_per_page;
-
- /* We put the toplevel page directory page at the top of memory. */
- pgdir = from_guest_phys(mem) - initrd_size - getpagesize();
-
- /* Now we use the next linear_pages pages as pte pages */
- linear = (void *)pgdir - linear_pages*getpagesize();
-
- /* Linear mapping is easy: put every page's address into the mapping in
- * order. PAGE_PRESENT contains the flags Present, Writable and
- * Executable. */
- for (i = 0; i < mapped_pages; i++)
- linear[i] = ((i * getpagesize()) | PAGE_PRESENT);
-
- /* The top level points to the linear page table pages above. */
- for (i = 0; i < mapped_pages; i += ptes_per_page) {
- pgdir[i/ptes_per_page]
- = ((to_guest_phys(linear) + i*sizeof(void *))
- | PAGE_PRESENT);
- }
-
- verbose("Linear mapping of %u pages in %u pte pages at %#lx\n",
- mapped_pages, linear_pages, to_guest_phys(linear));
-
- /* We return the top level (guest-physical) address: the kernel needs
- * to know where it is. */
- return to_guest_phys(pgdir);
-}
/*:*/
/* Simple routine to roll all the commandline arguments together with spaces
unsigned int i, len = 0;
for (i = 0; args[i]; i++) {
+ if (i) {
+ strcat(dst+len, " ");
+ len++;
+ }
strcpy(dst+len, args[i]);
- strcat(dst+len, " ");
- len += strlen(args[i]) + 1;
+ len += strlen(args[i]);
}
/* In case it's empty. */
dst[len] = '\0';
/*L:185 This is where we actually tell the kernel to initialize the Guest. We
* saw the arguments it expects when we looked at initialize() in lguest_user.c:
- * the base of Guest "physical" memory, the top physical page to allow, the
- * top level pagetable and the entry point for the Guest. */
-static int tell_kernel(unsigned long pgdir, unsigned long start)
+ * the base of Guest "physical" memory, the top physical page to allow and the
+ * entry point for the Guest. */
+static int tell_kernel(unsigned long start)
{
unsigned long args[] = { LHREQ_INITIALIZE,
(unsigned long)guest_base,
- guest_limit / getpagesize(), pgdir, start };
+ guest_limit / getpagesize(), start };
int fd;
verbose("Guest: %p - %p (%#lx)\n",
* watch, but handing a file descriptor mask through to the kernel is fairly
* icky.
*
- * Instead, we fork off a process which watches the file descriptors and writes
+ * Instead, we clone off a thread which watches the file descriptors and writes
* the LHREQ_BREAK command to the /dev/lguest file descriptor to tell the Host
* stop running the Guest. This causes the Launcher to return from the
* /dev/lguest read with -EAGAIN, where it will write to /dev/lguest to reset
* the LHREQ_BREAK and wake us up again.
*
* This, of course, is merely a different *kind* of icky.
+ *
+ * Given my well-known antipathy to threads, I'd prefer to use processes. But
+ * it's easier to share Guest memory with threads, and trivial to share the
+ * devices.infds as the Launcher changes it.
*/
-static void wake_parent(int pipefd, int lguest_fd)
+static int waker(void *unused)
{
- /* Add the pipe from the Launcher to the fdset in the device_list, so
- * we watch it, too. */
- add_device_fd(pipefd);
+ /* Close the write end of the pipe: only the Launcher has it open. */
+ close(waker_fds.pipe[1]);
for (;;) {
fd_set rfds = devices.infds;
unsigned long args[] = { LHREQ_BREAK, 1 };
+ unsigned int maxfd = devices.max_infd;
+
+ /* We also listen to the pipe from the Launcher. */
+ FD_SET(waker_fds.pipe[0], &rfds);
+ if (waker_fds.pipe[0] > maxfd)
+ maxfd = waker_fds.pipe[0];
/* Wait until input is ready from one of the devices. */
- select(devices.max_infd+1, &rfds, NULL, NULL, NULL);
- /* Is it a message from the Launcher? */
- if (FD_ISSET(pipefd, &rfds)) {
- int fd;
- /* If read() returns 0, it means the Launcher has
- * exited. We silently follow. */
- if (read(pipefd, &fd, sizeof(fd)) == 0)
- exit(0);
- /* Otherwise it's telling us to change what file
- * descriptors we're to listen to. Positive means
- * listen to a new one, negative means stop
- * listening. */
- if (fd >= 0)
- FD_SET(fd, &devices.infds);
- else
- FD_CLR(-fd - 1, &devices.infds);
- } else /* Send LHREQ_BREAK command. */
- pwrite(lguest_fd, args, sizeof(args), cpu_id);
+ select(maxfd+1, &rfds, NULL, NULL, NULL);
+
+ /* Message from Launcher? */
+ if (FD_ISSET(waker_fds.pipe[0], &rfds)) {
+ char c;
+ /* If this fails, then assume Launcher has exited.
+ * Don't do anything on exit: we're just a thread! */
+ if (read(waker_fds.pipe[0], &c, 1) != 1)
+ _exit(0);
+ continue;
+ }
+
+ /* Send LHREQ_BREAK command to snap the Launcher out of it. */
+ pwrite(waker_fds.lguest_fd, args, sizeof(args), cpu_id);
}
+ return 0;
}
/* This routine just sets up a pipe to the Waker process. */
-static int setup_waker(int lguest_fd)
-{
- int pipefd[2], child;
-
- /* We create a pipe to talk to the Waker, and also so it knows when the
- * Launcher dies (and closes pipe). */
- pipe(pipefd);
- child = fork();
- if (child == -1)
- err(1, "forking");
-
- if (child == 0) {
- /* We are the Waker: close the "writing" end of our copy of the
- * pipe and start waiting for input. */
- close(pipefd[1]);
- wake_parent(pipefd[0], lguest_fd);
- }
- /* Close the reading end of our copy of the pipe. */
- close(pipefd[0]);
+static void setup_waker(int lguest_fd)
+{
+ /* This pipe is closed when Launcher dies, telling Waker. */
+ if (pipe(waker_fds.pipe) != 0)
+ err(1, "Creating pipe for Waker");
- /* Here is the fd used to talk to the waker. */
- return pipefd[1];
+ /* Waker also needs to know the lguest fd */
+ waker_fds.lguest_fd = lguest_fd;
+
+ if (clone(waker, malloc(4096) + 4096, CLONE_VM | SIGCHLD, NULL) == -1)
+ err(1, "Creating Waker");
}
/*
unsigned int *out_num, unsigned int *in_num)
{
unsigned int i, head;
+ u16 last_avail;
/* Check it isn't doing very strange things with descriptor numbers. */
- if ((u16)(vq->vring.avail->idx - vq->last_avail_idx) > vq->vring.num)
+ last_avail = lg_last_avail(vq);
+ if ((u16)(vq->vring.avail->idx - last_avail) > vq->vring.num)
errx(1, "Guest moved used index from %u to %u",
- vq->last_avail_idx, vq->vring.avail->idx);
+ last_avail, vq->vring.avail->idx);
/* If there's nothing new since last we looked, return invalid. */
- if (vq->vring.avail->idx == vq->last_avail_idx)
+ if (vq->vring.avail->idx == last_avail)
return vq->vring.num;
/* Grab the next descriptor number they're advertising, and increment
* the index we've seen. */
- head = vq->vring.avail->ring[vq->last_avail_idx++ % vq->vring.num];
+ head = vq->vring.avail->ring[last_avail % vq->vring.num];
+ lg_last_avail(vq)++;
/* If their number is silly, that's a fatal mistake. */
if (head >= vq->vring.num)
errx(1, "Looped descriptor");
} while ((i = next_desc(vq, i)) != vq->vring.num);
+ vq->inflight++;
return head;
}
/* Make sure buffer is written before we update index. */
wmb();
vq->vring.used->idx++;
+ vq->inflight--;
}
/* This actually sends the interrupt for this virtqueue */
{
unsigned long buf[] = { LHREQ_IRQ, vq->config.irq };
- /* If they don't want an interrupt, don't send one. */
- if (vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT)
+ /* If they don't want an interrupt, don't send one, unless empty. */
+ if ((vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT)
+ && vq->inflight)
return;
/* Send the Guest an interrupt tell them we used something up. */
unsigned long args[] = { LHREQ_BREAK, 0 };
/* Close the fd so Waker will know it has to
* exit. */
- close(waker_fd);
- /* Just in case waker is blocked in BREAK, send
+ close(waker_fds.pipe[1]);
+ /* Just in case Waker is blocked in BREAK, send
* unbreak now. */
write(fd, args, sizeof(args));
exit(2);
/* Handling output for console is simple: we just get all the output buffers
* and write them to stdout. */
-static void handle_console_output(int fd, struct virtqueue *vq)
+static void handle_console_output(int fd, struct virtqueue *vq, bool timeout)
{
unsigned int head, out, in;
int len;
}
}
+/* This is called when we no longer want to hear about Guest changes to a
+ * virtqueue. This is more efficient in high-traffic cases, but it means we
+ * have to set a timer to check if any more changes have occurred. */
+static void block_vq(struct virtqueue *vq)
+{
+ struct itimerval itm;
+
+ vq->vring.used->flags |= VRING_USED_F_NO_NOTIFY;
+ vq->blocked = true;
+
+ itm.it_interval.tv_sec = 0;
+ itm.it_interval.tv_usec = 0;
+ itm.it_value.tv_sec = 0;
+ itm.it_value.tv_usec = timeout_usec;
+
+ setitimer(ITIMER_REAL, &itm, NULL);
+}
+
/*
* The Network
*
* Handling output for network is also simple: we get all the output buffers
* and write them (ignoring the first element) to this device's file descriptor
- * (stdout). */
-static void handle_net_output(int fd, struct virtqueue *vq)
+ * (/dev/net/tun).
+ */
+static void handle_net_output(int fd, struct virtqueue *vq, bool timeout)
{
- unsigned int head, out, in;
+ unsigned int head, out, in, num = 0;
int len;
struct iovec iov[vq->vring.num];
+ static int last_timeout_num;
/* Keep getting output buffers from the Guest until we run out. */
while ((head = get_vq_desc(vq, iov, &out, &in)) != vq->vring.num) {
if (in)
errx(1, "Input buffers in output queue?");
- /* Check header, but otherwise ignore it (we told the Guest we
- * supported no features, so it shouldn't have anything
- * interesting). */
- (void)convert(&iov[0], struct virtio_net_hdr);
- len = writev(vq->dev->fd, iov+1, out-1);
+ len = writev(vq->dev->fd, iov, out);
+ if (len < 0)
+ err(1, "Writing network packet to tun");
add_used_and_trigger(fd, vq, head, len);
+ num++;
+ }
+
+ /* Block further kicks and set up a timer if we saw anything. */
+ if (!timeout && num)
+ block_vq(vq);
+
+ /* We never quite know how long should we wait before we check the
+ * queue again for more packets. We start at 500 microseconds, and if
+ * we get fewer packets than last time, we assume we made the timeout
+ * too small and increase it by 10 microseconds. Otherwise, we drop it
+ * by one microsecond every time. It seems to work well enough. */
+ if (timeout) {
+ if (num < last_timeout_num)
+ timeout_usec += 10;
+ else if (timeout_usec > 1)
+ timeout_usec--;
+ last_timeout_num = num;
}
}
unsigned int head, in_num, out_num;
int len;
struct iovec iov[dev->vq->vring.num];
- struct virtio_net_hdr *hdr;
/* First we need a network buffer from the Guests's recv virtqueue. */
head = get_vq_desc(dev->vq, iov, &out_num, &in_num);
* early, the Guest won't be ready yet. Wait until the device
* status says it's ready. */
/* FIXME: Actually want DRIVER_ACTIVE here. */
- if (dev->desc->status & VIRTIO_CONFIG_S_DRIVER_OK)
- warn("network: no dma buffer!");
+
+ /* Now tell it we want to know if new things appear. */
+ dev->vq->vring.used->flags &= ~VRING_USED_F_NO_NOTIFY;
+ wmb();
+
/* We'll turn this back on if input buffers are registered. */
return false;
} else if (out_num)
errx(1, "Output buffers in network recv queue?");
- /* First element is the header: we set it to 0 (no features). */
- hdr = convert(&iov[0], struct virtio_net_hdr);
- hdr->flags = 0;
- hdr->gso_type = VIRTIO_NET_HDR_GSO_NONE;
-
/* Read the packet from the device directly into the Guest's buffer. */
- len = readv(dev->fd, iov+1, in_num-1);
+ len = readv(dev->fd, iov, in_num);
if (len <= 0)
err(1, "reading network");
/* Tell the Guest about the new packet. */
- add_used_and_trigger(fd, dev->vq, head, sizeof(*hdr) + len);
+ add_used_and_trigger(fd, dev->vq, head, len);
verbose("tun input packet len %i [%02x %02x] (%s)\n", len,
((u8 *)iov[1].iov_base)[0], ((u8 *)iov[1].iov_base)[1],
/*L:215 This is the callback attached to the network and console input
* virtqueues: it ensures we try again, in case we stopped console or net
* delivery because Guest didn't have any buffers. */
-static void enable_fd(int fd, struct virtqueue *vq)
+static void enable_fd(int fd, struct virtqueue *vq, bool timeout)
{
add_device_fd(vq->dev->fd);
- /* Tell waker to listen to it again */
- write(waker_fd, &vq->dev->fd, sizeof(vq->dev->fd));
+ /* Snap the Waker out of its select loop. */
+ write(waker_fds.pipe[1], "", 1);
+}
+
+static void net_enable_fd(int fd, struct virtqueue *vq, bool timeout)
+{
+ /* We don't need to know again when Guest refills receive buffer. */
+ vq->vring.used->flags |= VRING_USED_F_NO_NOTIFY;
+ enable_fd(fd, vq, timeout);
+}
+
+/* When the Guest tells us they updated the status field, we handle it. */
+static void update_device_status(struct device *dev)
+{
+ struct virtqueue *vq;
+
+ /* This is a reset. */
+ if (dev->desc->status == 0) {
+ verbose("Resetting device %s\n", dev->name);
+
+ /* Clear any features they've acked. */
+ memset(get_feature_bits(dev) + dev->desc->feature_len, 0,
+ dev->desc->feature_len);
+
+ /* Zero out the virtqueues. */
+ for (vq = dev->vq; vq; vq = vq->next) {
+ memset(vq->vring.desc, 0,
+ vring_size(vq->config.num, LGUEST_VRING_ALIGN));
+ lg_last_avail(vq) = 0;
+ }
+ } else if (dev->desc->status & VIRTIO_CONFIG_S_FAILED) {
+ warnx("Device %s configuration FAILED", dev->name);
+ } else if (dev->desc->status & VIRTIO_CONFIG_S_DRIVER_OK) {
+ unsigned int i;
+
+ verbose("Device %s OK: offered", dev->name);
+ for (i = 0; i < dev->desc->feature_len; i++)
+ verbose(" %02x", get_feature_bits(dev)[i]);
+ verbose(", accepted");
+ for (i = 0; i < dev->desc->feature_len; i++)
+ verbose(" %02x", get_feature_bits(dev)
+ [dev->desc->feature_len+i]);
+
+ if (dev->ready)
+ dev->ready(dev);
+ }
}
/* This is the generic routine we call when the Guest uses LHCALL_NOTIFY. */
struct device *i;
struct virtqueue *vq;
- /* Check each virtqueue. */
+ /* Check each device and virtqueue. */
for (i = devices.dev; i; i = i->next) {
+ /* Notifications to device descriptors update device status. */
+ if (from_guest_phys(addr) == i->desc) {
+ update_device_status(i);
+ return;
+ }
+
+ /* Notifications to virtqueues mean output has occurred. */
for (vq = i->vq; vq; vq = vq->next) {
- if (vq->config.pfn == addr/getpagesize()
- && vq->handle_output) {
- verbose("Output to %s\n", vq->dev->name);
- vq->handle_output(fd, vq);
+ if (vq->config.pfn != addr/getpagesize())
+ continue;
+
+ /* Guest should acknowledge (and set features!) before
+ * using the device. */
+ if (i->desc->status == 0) {
+ warnx("%s gave early output", i->name);
return;
}
+
+ if (strcmp(vq->dev->name, "console") != 0)
+ verbose("Output to %s\n", vq->dev->name);
+ if (vq->handle_output)
+ vq->handle_output(fd, vq, false);
+ return;
}
}
strnlen(from_guest_phys(addr), guest_limit - addr));
}
+static void handle_timeout(int fd)
+{
+ char buf[32];
+ struct device *i;
+ struct virtqueue *vq;
+
+ /* Clear the pipe */
+ read(timeoutpipe[0], buf, sizeof(buf));
+
+ /* Check each device and virtqueue: flush blocked ones. */
+ for (i = devices.dev; i; i = i->next) {
+ for (vq = i->vq; vq; vq = vq->next) {
+ if (!vq->blocked)
+ continue;
+
+ vq->vring.used->flags &= ~VRING_USED_F_NO_NOTIFY;
+ vq->blocked = false;
+ if (vq->handle_output)
+ vq->handle_output(fd, vq, true);
+ }
+ }
+}
+
/* This is called when the Waker wakes us up: check for incoming file
* descriptors. */
static void handle_input(int fd)
for (;;) {
struct device *i;
fd_set fds = devices.infds;
+ int num;
+ num = select(devices.max_infd+1, &fds, NULL, NULL, &poll);
+ /* Could get interrupted */
+ if (num < 0)
+ continue;
/* If nothing is ready, we're done. */
- if (select(devices.max_infd+1, &fds, NULL, NULL, &poll) == 0)
+ if (num == 0)
break;
- /* Otherwise, call the device(s) which have readable
- * file descriptors and a method of handling them. */
+ /* Otherwise, call the device(s) which have readable file
+ * descriptors and a method of handling them. */
for (i = devices.dev; i; i = i->next) {
if (i->handle_input && FD_ISSET(i->fd, &fds)) {
- int dev_fd;
if (i->handle_input(fd, i))
continue;
* should no longer service it. Networking and
* console do this when there's no input
* buffers to deliver into. Console also uses
- * it when it discovers that stdin is
- * closed. */
+ * it when it discovers that stdin is closed. */
FD_CLR(i->fd, &devices.infds);
- /* Tell waker to ignore it too, by sending a
- * negative fd number (-1, since 0 is a valid
- * FD number). */
- dev_fd = -i->fd - 1;
- write(waker_fd, &dev_fd, sizeof(dev_fd));
}
}
+
+ /* Is this the timeout fd? */
+ if (FD_ISSET(timeoutpipe[0], &fds))
+ handle_timeout(fd);
}
}
*
* All devices need a descriptor so the Guest knows it exists, and a "struct
* device" so the Launcher can keep track of it. We have common helper
- * routines to allocate them.
- *
- * This routine allocates a new "struct lguest_device_desc" from descriptor
- * table just above the Guest's normal memory. It returns a pointer to that
- * descriptor. */
-static struct lguest_device_desc *new_dev_desc(u16 type)
-{
- struct lguest_device_desc *d;
-
- /* We only have one page for all the descriptors. */
- if (devices.desc_used + sizeof(*d) > getpagesize())
- errx(1, "Too many devices");
-
- /* We don't need to set config_len or status: page is 0 already. */
- d = (void *)devices.descpage + devices.desc_used;
- d->type = type;
- devices.desc_used += sizeof(*d);
+ * routines to allocate and manage them.
+ */
- return d;
+/* The layout of the device page is a "struct lguest_device_desc" followed by a
+ * number of virtqueue descriptors, then two sets of feature bits, then an
+ * array of configuration bytes. This routine returns the configuration
+ * pointer. */
+static u8 *device_config(const struct device *dev)
+{
+ return (void *)(dev->desc + 1)
+ + dev->desc->num_vq * sizeof(struct lguest_vqconfig)
+ + dev->desc->feature_len * 2;
}
-/* Each device descriptor is followed by some configuration information.
- * Each configuration field looks like: u8 type, u8 len, [... len bytes...].
- *
- * This routine adds a new field to an existing device's descriptor. It only
- * works for the last device, but that's OK because that's how we use it. */
-static void add_desc_field(struct device *dev, u8 type, u8 len, const void *c)
+/* This routine allocates a new "struct lguest_device_desc" from descriptor
+ * table page just above the Guest's normal memory. It returns a pointer to
+ * that descriptor. */
+static struct lguest_device_desc *new_dev_desc(u16 type)
{
- /* This is the last descriptor, right? */
- assert(devices.descpage + devices.desc_used
- == (u8 *)(dev->desc + 1) + dev->desc->config_len);
+ struct lguest_device_desc d = { .type = type };
+ void *p;
- /* We only have one page of device descriptions. */
- if (devices.desc_used + 2 + len > getpagesize())
- errx(1, "Too many devices");
+ /* Figure out where the next device config is, based on the last one. */
+ if (devices.lastdev)
+ p = device_config(devices.lastdev)
+ + devices.lastdev->desc->config_len;
+ else
+ p = devices.descpage;
- /* Copy in the new config header: type then length. */
- devices.descpage[devices.desc_used++] = type;
- devices.descpage[devices.desc_used++] = len;
- memcpy(devices.descpage + devices.desc_used, c, len);
- devices.desc_used += len;
+ /* We only have one page for all the descriptors. */
+ if (p + sizeof(d) > (void *)devices.descpage + getpagesize())
+ errx(1, "Too many devices");
- /* Update the device descriptor length: two byte head then data. */
- dev->desc->config_len += 2 + len;
+ /* p might not be aligned, so we memcpy in. */
+ return memcpy(p, &d, sizeof(d));
}
-/* This routine adds a virtqueue to a device. We specify how many descriptors
- * the virtqueue is to have. */
+/* Each device descriptor is followed by the description of its virtqueues. We
+ * specify how many descriptors the virtqueue is to have. */
static void add_virtqueue(struct device *dev, unsigned int num_descs,
- void (*handle_output)(int fd, struct virtqueue *me))
+ void (*handle_output)(int, struct virtqueue *, bool))
{
unsigned int pages;
struct virtqueue **i, *vq = malloc(sizeof(*vq));
void *p;
- /* First we need some pages for this virtqueue. */
- pages = (vring_size(num_descs, getpagesize()) + getpagesize() - 1)
+ /* First we need some memory for this virtqueue. */
+ pages = (vring_size(num_descs, LGUEST_VRING_ALIGN) + getpagesize() - 1)
/ getpagesize();
p = get_pages(pages);
vq->next = NULL;
vq->last_avail_idx = 0;
vq->dev = dev;
+ vq->inflight = 0;
+ vq->blocked = false;
/* Initialize the configuration. */
vq->config.num = num_descs;
vq->config.pfn = to_guest_phys(p) / getpagesize();
/* Initialize the vring. */
- vring_init(&vq->vring, num_descs, p, getpagesize());
+ vring_init(&vq->vring, num_descs, p, LGUEST_VRING_ALIGN);
+
+ /* Append virtqueue to this device's descriptor. We use
+ * device_config() to get the end of the device's current virtqueues;
+ * we check that we haven't added any config or feature information
+ * yet, otherwise we'd be overwriting them. */
+ assert(dev->desc->config_len == 0 && dev->desc->feature_len == 0);
+ memcpy(device_config(dev), &vq->config, sizeof(vq->config));
+ dev->desc->num_vq++;
- /* Add the configuration information to this device's descriptor. */
- add_desc_field(dev, VIRTIO_CONFIG_F_VIRTQUEUE,
- sizeof(vq->config), &vq->config);
+ verbose("Virtqueue page %#lx\n", to_guest_phys(p));
/* Add to tail of list, so dev->vq is first vq, dev->vq->next is
* second. */
* virtqueue. */
vq->handle_output = handle_output;
- /* Set the "Don't Notify Me" flag if we don't have a handler */
+ /* As an optimization, set the advisory "Don't Notify Me" flag if we
+ * don't have a handler */
if (!handle_output)
vq->vring.used->flags = VRING_USED_F_NO_NOTIFY;
}
+/* The first half of the feature bitmask is for us to advertise features. The
+ * second half is for the Guest to accept features. */
+static void add_feature(struct device *dev, unsigned bit)
+{
+ u8 *features = get_feature_bits(dev);
+
+ /* We can't extend the feature bits once we've added config bytes */
+ if (dev->desc->feature_len <= bit / CHAR_BIT) {
+ assert(dev->desc->config_len == 0);
+ dev->desc->feature_len = (bit / CHAR_BIT) + 1;
+ }
+
+ features[bit / CHAR_BIT] |= (1 << (bit % CHAR_BIT));
+}
+
+/* This routine sets the configuration fields for an existing device's
+ * descriptor. It only works for the last device, but that's OK because that's
+ * how we use it. */
+static void set_config(struct device *dev, unsigned len, const void *conf)
+{
+ /* Check we haven't overflowed our single page. */
+ if (device_config(dev) + len > devices.descpage + getpagesize())
+ errx(1, "Too many devices");
+
+ /* Copy in the config information, and store the length. */
+ memcpy(device_config(dev), conf, len);
+ dev->desc->config_len = len;
+}
+
/* This routine does all the creation and setup of a new device, including
- * calling new_dev_desc() to allocate the descriptor and device memory. */
+ * calling new_dev_desc() to allocate the descriptor and device memory.
+ *
+ * See what I mean about userspace being boring? */
static struct device *new_device(const char *name, u16 type, int fd,
bool (*handle_input)(int, struct device *))
{
struct device *dev = malloc(sizeof(*dev));
- /* Append to device list. Prepending to a single-linked list is
- * easier, but the user expects the devices to be arranged on the bus
- * in command-line order. The first network device on the command line
- * is eth0, the first block device /dev/vda, etc. */
- *devices.lastdev = dev;
- dev->next = NULL;
- devices.lastdev = &dev->next;
-
/* Now we populate the fields one at a time. */
dev->fd = fd;
/* If we have an input handler for this file descriptor, then we add it
dev->handle_input = handle_input;
dev->name = name;
dev->vq = NULL;
+ dev->ready = NULL;
+
+ /* Append to device list. Prepending to a single-linked list is
+ * easier, but the user expects the devices to be arranged on the bus
+ * in command-line order. The first network device on the command line
+ * is eth0, the first block device /dev/vda, etc. */
+ if (devices.lastdev)
+ devices.lastdev->next = dev;
+ else
+ devices.dev = dev;
+ devices.lastdev = dev;
+
return dev;
}
}
/*:*/
+static void timeout_alarm(int sig)
+{
+ write(timeoutpipe[1], "", 1);
+}
+
+static void setup_timeout(void)
+{
+ if (pipe(timeoutpipe) != 0)
+ err(1, "Creating timeout pipe");
+
+ if (fcntl(timeoutpipe[1], F_SETFL,
+ fcntl(timeoutpipe[1], F_GETFL) | O_NONBLOCK) != 0)
+ err(1, "Making timeout pipe nonblocking");
+
+ add_device_fd(timeoutpipe[0]);
+ signal(SIGALRM, timeout_alarm);
+}
+
/*M:010 Inter-guest networking is an interesting area. Simplest is to have a
* --sharenet=<name> option which opens or creates a named pipe. This can be
* used to send packets to another guest in a 1:1 manner.
static u32 str2ip(const char *ipaddr)
{
- unsigned int byte[4];
+ unsigned int b[4];
- sscanf(ipaddr, "%u.%u.%u.%u", &byte[0], &byte[1], &byte[2], &byte[3]);
- return (byte[0] << 24) | (byte[1] << 16) | (byte[2] << 8) | byte[3];
+ if (sscanf(ipaddr, "%u.%u.%u.%u", &b[0], &b[1], &b[2], &b[3]) != 4)
+ errx(1, "Failed to parse IP address '%s'", ipaddr);
+ return (b[0] << 24) | (b[1] << 16) | (b[2] << 8) | b[3];
+}
+
+static void str2mac(const char *macaddr, unsigned char mac[6])
+{
+ unsigned int m[6];
+ if (sscanf(macaddr, "%02x:%02x:%02x:%02x:%02x:%02x",
+ &m[0], &m[1], &m[2], &m[3], &m[4], &m[5]) != 6)
+ errx(1, "Failed to parse mac address '%s'", macaddr);
+ mac[0] = m[0];
+ mac[1] = m[1];
+ mac[2] = m[2];
+ mac[3] = m[3];
+ mac[4] = m[4];
+ mac[5] = m[5];
}
/* This code is "adapted" from libbridge: it attaches the Host end of the
errx(1, "interface %s does not exist!", if_name);
strncpy(ifr.ifr_name, br_name, IFNAMSIZ);
+ ifr.ifr_name[IFNAMSIZ-1] = '\0';
ifr.ifr_ifindex = ifidx;
if (ioctl(fd, SIOCBRADDIF, &ifr) < 0)
err(1, "can't add %s to bridge %s", if_name, br_name);
/* This sets up the Host end of the network device with an IP address, brings
* it up so packets will flow, the copies the MAC address into the hwaddr
* pointer. */
-static void configure_device(int fd, const char *devname, u32 ipaddr,
- unsigned char hwaddr[6])
+static void configure_device(int fd, const char *tapif, u32 ipaddr)
{
struct ifreq ifr;
struct sockaddr_in *sin = (struct sockaddr_in *)&ifr.ifr_addr;
- /* Don't read these incantations. Just cut & paste them like I did! */
memset(&ifr, 0, sizeof(ifr));
- strcpy(ifr.ifr_name, devname);
+ strcpy(ifr.ifr_name, tapif);
+
+ /* Don't read these incantations. Just cut & paste them like I did! */
sin->sin_family = AF_INET;
sin->sin_addr.s_addr = htonl(ipaddr);
if (ioctl(fd, SIOCSIFADDR, &ifr) != 0)
- err(1, "Setting %s interface address", devname);
+ err(1, "Setting %s interface address", tapif);
ifr.ifr_flags = IFF_UP;
if (ioctl(fd, SIOCSIFFLAGS, &ifr) != 0)
- err(1, "Bringing interface %s up", devname);
-
- /* SIOC stands for Socket I/O Control. G means Get (vs S for Set
- * above). IF means Interface, and HWADDR is hardware address.
- * Simple! */
- if (ioctl(fd, SIOCGIFHWADDR, &ifr) != 0)
- err(1, "getting hw address for %s", devname);
- memcpy(hwaddr, ifr.ifr_hwaddr.sa_data, 6);
+ err(1, "Bringing interface %s up", tapif);
}
-/*L:195 Our network is a Host<->Guest network. This can either use bridging or
- * routing, but the principle is the same: it uses the "tun" device to inject
- * packets into the Host as if they came in from a normal network card. We
- * just shunt packets between the Guest and the tun device. */
-static void setup_tun_net(const char *arg)
+static int get_tun_device(char tapif[IFNAMSIZ])
{
- struct device *dev;
struct ifreq ifr;
- int netfd, ipfd;
- u32 ip;
- const char *br_name = NULL;
- u8 hwaddr[6];
+ int netfd;
+
+ /* Start with this zeroed. Messy but sure. */
+ memset(&ifr, 0, sizeof(ifr));
/* We open the /dev/net/tun device and tell it we want a tap device. A
* tap device is like a tun device, only somehow different. To tell
* the truth, I completely blundered my way through this code, but it
* works now! */
netfd = open_or_die("/dev/net/tun", O_RDWR);
- memset(&ifr, 0, sizeof(ifr));
- ifr.ifr_flags = IFF_TAP | IFF_NO_PI;
+ ifr.ifr_flags = IFF_TAP | IFF_NO_PI | IFF_VNET_HDR;
strcpy(ifr.ifr_name, "tap%d");
if (ioctl(netfd, TUNSETIFF, &ifr) != 0)
err(1, "configuring /dev/net/tun");
+
+ if (ioctl(netfd, TUNSETOFFLOAD,
+ TUN_F_CSUM|TUN_F_TSO4|TUN_F_TSO6|TUN_F_TSO_ECN) != 0)
+ err(1, "Could not set features for tun device");
+
/* We don't need checksums calculated for packets coming in this
* device: trust us! */
ioctl(netfd, TUNSETNOCSUM, 1);
+ memcpy(tapif, ifr.ifr_name, IFNAMSIZ);
+ return netfd;
+}
+
+/*L:195 Our network is a Host<->Guest network. This can either use bridging or
+ * routing, but the principle is the same: it uses the "tun" device to inject
+ * packets into the Host as if they came in from a normal network card. We
+ * just shunt packets between the Guest and the tun device. */
+static void setup_tun_net(char *arg)
+{
+ struct device *dev;
+ int netfd, ipfd;
+ u32 ip = INADDR_ANY;
+ bool bridging = false;
+ char tapif[IFNAMSIZ], *p;
+ struct virtio_net_config conf;
+
+ netfd = get_tun_device(tapif);
+
/* First we create a new network device. */
dev = new_device("net", VIRTIO_ID_NET, netfd, handle_tun_input);
/* Network devices need a receive and a send queue, just like
* console. */
- add_virtqueue(dev, VIRTQUEUE_NUM, enable_fd);
+ add_virtqueue(dev, VIRTQUEUE_NUM, net_enable_fd);
add_virtqueue(dev, VIRTQUEUE_NUM, handle_net_output);
/* We need a socket to perform the magic network ioctls to bring up the
/* If the command line was --tunnet=bridge:<name> do bridging. */
if (!strncmp(BRIDGE_PFX, arg, strlen(BRIDGE_PFX))) {
- ip = INADDR_ANY;
- br_name = arg + strlen(BRIDGE_PFX);
- add_to_bridge(ipfd, ifr.ifr_name, br_name);
- } else /* It is an IP address to set up the device with */
- ip = str2ip(arg);
+ arg += strlen(BRIDGE_PFX);
+ bridging = true;
+ }
- /* Set up the tun device, and get the mac address for the interface. */
- configure_device(ipfd, ifr.ifr_name, ip, hwaddr);
+ /* A mac address may follow the bridge name or IP address */
+ p = strchr(arg, ':');
+ if (p) {
+ str2mac(p+1, conf.mac);
+ add_feature(dev, VIRTIO_NET_F_MAC);
+ *p = '\0';
+ }
- /* Tell Guest what MAC address to use. */
- add_desc_field(dev, VIRTIO_CONFIG_NET_MAC_F, sizeof(hwaddr), hwaddr);
+ /* arg is now either an IP address or a bridge name */
+ if (bridging)
+ add_to_bridge(ipfd, tapif, arg);
+ else
+ ip = str2ip(arg);
- /* We don't seed the socket any more; setup is done. */
+ /* Set up the tun device. */
+ configure_device(ipfd, tapif, ip);
+
+ add_feature(dev, VIRTIO_F_NOTIFY_ON_EMPTY);
+ /* Expect Guest to handle everything except UFO */
+ add_feature(dev, VIRTIO_NET_F_CSUM);
+ add_feature(dev, VIRTIO_NET_F_GUEST_CSUM);
+ add_feature(dev, VIRTIO_NET_F_GUEST_TSO4);
+ add_feature(dev, VIRTIO_NET_F_GUEST_TSO6);
+ add_feature(dev, VIRTIO_NET_F_GUEST_ECN);
+ add_feature(dev, VIRTIO_NET_F_HOST_TSO4);
+ add_feature(dev, VIRTIO_NET_F_HOST_TSO6);
+ add_feature(dev, VIRTIO_NET_F_HOST_ECN);
+ set_config(dev, sizeof(conf), &conf);
+
+ /* We don't need the socket any more; setup is done. */
close(ipfd);
- verbose("device %u: tun net %u.%u.%u.%u\n",
- devices.device_num++,
- (u8)(ip>>24),(u8)(ip>>16),(u8)(ip>>8),(u8)ip);
- if (br_name)
- verbose("attached to bridge: %s\n", br_name);
+ devices.device_num++;
+
+ if (bridging)
+ verbose("device %u: tun %s attached to bridge: %s\n",
+ devices.device_num, tapif, arg);
+ else
+ verbose("device %u: tun %s: %s\n",
+ devices.device_num, tapif, arg);
}
/* Our block (disk) device should be really simple: the Guest asks for a block
* Launcher triggers interrupt to Guest. */
int done_fd;
};
-/*:*/
/*L:210
* The Disk
struct vblk_info *vblk = dev->priv;
unsigned int head, out_num, in_num, wlen;
int ret;
- struct virtio_blk_inhdr *in;
+ u8 *in;
struct virtio_blk_outhdr *out;
struct iovec iov[dev->vq->vring.num];
off64_t off;
head, out_num, in_num);
out = convert(&iov[0], struct virtio_blk_outhdr);
- in = convert(&iov[out_num+in_num-1], struct virtio_blk_inhdr);
+ in = convert(&iov[out_num+in_num-1], u8);
off = out->sector * 512;
/* The block device implements "barriers", where the Guest indicates
* It'd be nice if we supported eject, for example, but we don't. */
if (out->type & VIRTIO_BLK_T_SCSI_CMD) {
fprintf(stderr, "Scsi commands unsupported\n");
- in->status = VIRTIO_BLK_S_UNSUPP;
+ *in = VIRTIO_BLK_S_UNSUPP;
wlen = sizeof(*in);
} else if (out->type & VIRTIO_BLK_T_OUT) {
/* Write */
errx(1, "Write past end %llu+%u", off, ret);
}
wlen = sizeof(*in);
- in->status = (ret >= 0 ? VIRTIO_BLK_S_OK : VIRTIO_BLK_S_IOERR);
+ *in = (ret >= 0 ? VIRTIO_BLK_S_OK : VIRTIO_BLK_S_IOERR);
} else {
/* Read */
verbose("READ from sector %llu: %i\n", out->sector, ret);
if (ret >= 0) {
wlen = sizeof(*in) + ret;
- in->status = VIRTIO_BLK_S_OK;
+ *in = VIRTIO_BLK_S_OK;
} else {
wlen = sizeof(*in);
- in->status = VIRTIO_BLK_S_IOERR;
+ *in = VIRTIO_BLK_S_IOERR;
}
}
+ /* OK, so we noted that it was pretty poor to use an fdatasync as a
+ * barrier. But Christoph Hellwig points out that we need a sync
+ * *afterwards* as well: "Barriers specify no reordering to the front
+ * or the back." And Jens Axboe confirmed it, so here we are: */
+ if (out->type & VIRTIO_BLK_T_BARRIER)
+ fdatasync(vblk->fd);
+
/* We can't trigger an IRQ, because we're not the Launcher. It does
* that when we tell it we're done. */
add_used(dev->vq, head, wlen);
while (read(vblk->workpipe[0], &c, 1) == 1) {
/* We acknowledge each request immediately to reduce latency,
* rather than waiting until we've done them all. I haven't
- * measured to see if it makes any difference. */
+ * measured to see if it makes any difference.
+ *
+ * That would be an interesting test, wouldn't it? You could
+ * also try having more than one I/O thread. */
while (service_io(dev))
write(vblk->done_fd, &c, 1);
}
}
/* Now we've seen the I/O thread, we return to the Launcher to see what happens
- * when the thread tells us it's completed some I/O. */
+ * when that thread tells us it's completed some I/O. */
static bool handle_io_finish(int fd, struct device *dev)
{
char c;
}
/* When the Guest submits some I/O, we just need to wake the I/O thread. */
-static void handle_virtblk_output(int fd, struct virtqueue *vq)
+static void handle_virtblk_output(int fd, struct virtqueue *vq, bool timeout)
{
struct vblk_info *vblk = vq->dev->priv;
char c = 0;
struct device *dev;
struct vblk_info *vblk;
void *stack;
- u64 cap;
- unsigned int val;
+ struct virtio_blk_config conf;
/* This is the pipe the I/O thread will use to tell us I/O is done. */
pipe(p);
vblk->fd = open_or_die(filename, O_RDWR|O_LARGEFILE);
vblk->len = lseek64(vblk->fd, 0, SEEK_END);
+ /* We support barriers. */
+ add_feature(dev, VIRTIO_BLK_F_BARRIER);
+
/* Tell Guest how many sectors this device has. */
- cap = cpu_to_le64(vblk->len / 512);
- add_desc_field(dev, VIRTIO_CONFIG_BLK_F_CAPACITY, sizeof(cap), &cap);
+ conf.capacity = cpu_to_le64(vblk->len / 512);
/* Tell Guest not to put in too many descriptors at once: two are used
* for the in and out elements. */
- val = cpu_to_le32(VIRTQUEUE_NUM - 2);
- add_desc_field(dev, VIRTIO_CONFIG_BLK_F_SEG_MAX, sizeof(val), &val);
+ add_feature(dev, VIRTIO_BLK_F_SEG_MAX);
+ conf.seg_max = cpu_to_le32(VIRTQUEUE_NUM - 2);
+
+ set_config(dev, sizeof(conf), &conf);
/* The I/O thread writes to this end of the pipe when done. */
vblk->done_fd = p[1];
* more work. */
pipe(vblk->workpipe);
- /* Create stack for thread and run it */
+ /* Create stack for thread and run it. Since stack grows upwards, we
+ * point the stack pointer to the end of this region. */
stack = malloc(32768);
/* SIGCHLD - We dont "wait" for our cloned thread, so prevent it from
* becoming a zombie. */
- if (clone(io_thread, stack + 32768, CLONE_VM | SIGCHLD, dev) == -1)
+ if (clone(io_thread, stack + 32768, CLONE_VM | SIGCHLD, dev) == -1)
err(1, "Creating clone");
/* We don't need to keep the I/O thread's end of the pipes open. */
close(vblk->workpipe[0]);
verbose("device %u: virtblock %llu sectors\n",
- devices.device_num, cap);
+ devices.device_num, le64_to_cpu(conf.capacity));
}
-/* That's the end of device setup. :*/
-/* Reboot */
+/* Our random number generator device reads from /dev/random into the Guest's
+ * input buffers. The usual case is that the Guest doesn't want random numbers
+ * and so has no buffers although /dev/random is still readable, whereas
+ * console is the reverse.
+ *
+ * The same logic applies, however. */
+static bool handle_rng_input(int fd, struct device *dev)
+{
+ int len;
+ unsigned int head, in_num, out_num, totlen = 0;
+ struct iovec iov[dev->vq->vring.num];
+
+ /* First we need a buffer from the Guests's virtqueue. */
+ head = get_vq_desc(dev->vq, iov, &out_num, &in_num);
+
+ /* If they're not ready for input, stop listening to this file
+ * descriptor. We'll start again once they add an input buffer. */
+ if (head == dev->vq->vring.num)
+ return false;
+
+ if (out_num)
+ errx(1, "Output buffers in rng?");
+
+ /* This is why we convert to iovecs: the readv() call uses them, and so
+ * it reads straight into the Guest's buffer. We loop to make sure we
+ * fill it. */
+ while (!iov_empty(iov, in_num)) {
+ len = readv(dev->fd, iov, in_num);
+ if (len <= 0)
+ err(1, "Read from /dev/random gave %i", len);
+ iov_consume(iov, in_num, len);
+ totlen += len;
+ }
+
+ /* Tell the Guest about the new input. */
+ add_used_and_trigger(fd, dev->vq, head, totlen);
+
+ /* Everything went OK! */
+ return true;
+}
+
+/* And this creates a "hardware" random number device for the Guest. */
+static void setup_rng(void)
+{
+ struct device *dev;
+ int fd;
+
+ fd = open_or_die("/dev/random", O_RDONLY);
+
+ /* The device responds to return from I/O thread. */
+ dev = new_device("rng", VIRTIO_ID_RNG, fd, handle_rng_input);
+
+ /* The device has one virtqueue, where the Guest places inbufs. */
+ add_virtqueue(dev, VIRTQUEUE_NUM, enable_fd);
+
+ verbose("device %u: rng\n", devices.device_num++);
+}
+/* That's the end of device setup. */
+
+/*L:230 Reboot is pretty easy: clean up and exec() the Launcher afresh. */
static void __attribute__((noreturn)) restart_guest(void)
{
unsigned int i;
- /* Closing pipes causes the waker thread and io_threads to die, and
- * closing /dev/lguest cleans up the Guest. Since we don't track all
- * open fds, we simply close everything beyond stderr. */
+ /* Since we don't track all open fds, we simply close everything beyond
+ * stderr. */
for (i = 3; i < FD_SETSIZE; i++)
close(i);
+
+ /* The exec automatically gets rid of the I/O and Waker threads. */
execv(main_args[0], main_args);
err(1, "Could not exec %s", main_args[0]);
}
-/*L:220 Finally we reach the core of the Launcher, which runs the Guest, serves
+/*L:220 Finally we reach the core of the Launcher which runs the Guest, serves
* its input and output, and finally, lays it to rest. */
static void __attribute__((noreturn)) run_guest(int lguest_fd)
{
/* ERESTART means that we need to reboot the guest */
} else if (errno == ERESTART) {
restart_guest();
- /* EAGAIN means the Waker wanted us to look at some input.
+ /* EAGAIN means a signal (timeout).
* Anything else means a bug or incompatible change. */
} else if (errno != EAGAIN)
err(1, "Running guest failed");
err(1, "Resetting break");
}
}
-/*
+/*L:240
* This is the end of the Launcher. The good news: we are over halfway
* through! The bad news: the most fiendish part of the code still lies ahead
* of us.
{ "verbose", 0, NULL, 'v' },
{ "tunnet", 1, NULL, 't' },
{ "block", 1, NULL, 'b' },
+ { "rng", 0, NULL, 'r' },
{ "initrd", 1, NULL, 'i' },
{ NULL },
};
static void usage(void)
{
errx(1, "Usage: lguest [--verbose] "
- "[--tunnet=(<ipaddr>|bridge:<bridgename>)\n"
+ "[--tunnet=(<ipaddr>:<macaddr>|bridge:<bridgename>:<macaddr>)\n"
"|--block=<filename>|--initrd=<filename>]...\n"
"<mem-in-mb> vmlinux [args...]");
}
{
/* Memory, top-level pagetable, code startpoint and size of the
* (optional) initrd. */
- unsigned long mem = 0, pgdir, start, initrd_size = 0;
+ unsigned long mem = 0, start, initrd_size = 0;
/* Two temporaries and the /dev/lguest file descriptor. */
int i, c, lguest_fd;
/* The boot information for the Guest. */
/* First we initialize the device list. Since console and network
* device receive input from a file descriptor, we keep an fdset
* (infds) and the maximum fd number (max_infd) with the head of the
- * list. We also keep a pointer to the last device, for easy appending
- * to the list. Finally, we keep the next interrupt number to hand out
- * (1: remember that 0 is used by the timer). */
+ * list. We also keep a pointer to the last device. Finally, we keep
+ * the next interrupt number to use for devices (1: remember that 0 is
+ * used by the timer). */
FD_ZERO(&devices.infds);
devices.max_infd = -1;
- devices.lastdev = &devices.dev;
+ devices.lastdev = NULL;
devices.next_irq = 1;
cpu_id = 0;
case 'b':
setup_block_file(optarg);
break;
+ case 'r':
+ setup_rng();
+ break;
case 'i':
initrd_name = optarg;
break;
/* We always have a console device */
setup_console();
+ /* We can timeout waiting for Guest network transmit. */
+ setup_timeout();
+
/* Now we load the kernel */
start = load_kernel(open_or_die(argv[optind+1], O_RDONLY));
boot->hdr.type_of_loader = 0xFF;
}
- /* Set up the initial linear pagetables, starting below the initrd. */
- pgdir = setup_pagetables(mem, initrd_size);
-
/* The Linux boot header contains an "E820" memory map: ours is a
* simple, single region. */
boot->e820_entries = 1;
/* We tell the kernel to initialize the Guest: this returns the open
* /dev/lguest file descriptor. */
- lguest_fd = tell_kernel(pgdir, start);
+ lguest_fd = tell_kernel(start);
- /* We fork off a child process, which wakes the Launcher whenever one
- * of the input file descriptors needs attention. Otherwise we would
- * run the Guest until it tries to output something. */
- waker_fd = setup_waker(lguest_fd);
+ /* We clone off a thread, which wakes the Launcher whenever one of the
+ * input file descriptors needs attention. We call this the Waker, and
+ * we'll cover it in a moment. */
+ setup_waker(lguest_fd);
/* Finally, run the Guest. This doesn't return. */
run_guest(lguest_fd);