page-types: add standard GPL license header
[safe/jmp/linux-2.6] / Documentation / kvm / api.txt
index 1b1c22d..e1a1141 100644 (file)
@@ -517,6 +517,191 @@ struct kvm_fpu {
        __u32 pad2;
 };
 
+4.23 KVM_CREATE_IRQCHIP
+
+Capability: KVM_CAP_IRQCHIP
+Architectures: x86, ia64
+Type: vm ioctl
+Parameters: none
+Returns: 0 on success, -1 on error
+
+Creates an interrupt controller model in the kernel.  On x86, creates a virtual
+ioapic, a virtual PIC (two PICs, nested), and sets up future vcpus to have a
+local APIC.  IRQ routing for GSIs 0-15 is set to both PIC and IOAPIC; GSI 16-23
+only go to the IOAPIC.  On ia64, a IOSAPIC is created.
+
+4.24 KVM_IRQ_LINE
+
+Capability: KVM_CAP_IRQCHIP
+Architectures: x86, ia64
+Type: vm ioctl
+Parameters: struct kvm_irq_level
+Returns: 0 on success, -1 on error
+
+Sets the level of a GSI input to the interrupt controller model in the kernel.
+Requires that an interrupt controller model has been previously created with
+KVM_CREATE_IRQCHIP.  Note that edge-triggered interrupts require the level
+to be set to 1 and then back to 0.
+
+struct kvm_irq_level {
+       union {
+               __u32 irq;     /* GSI */
+               __s32 status;  /* not used for KVM_IRQ_LEVEL */
+       };
+       __u32 level;           /* 0 or 1 */
+};
+
+4.25 KVM_GET_IRQCHIP
+
+Capability: KVM_CAP_IRQCHIP
+Architectures: x86, ia64
+Type: vm ioctl
+Parameters: struct kvm_irqchip (in/out)
+Returns: 0 on success, -1 on error
+
+Reads the state of a kernel interrupt controller created with
+KVM_CREATE_IRQCHIP into a buffer provided by the caller.
+
+struct kvm_irqchip {
+       __u32 chip_id;  /* 0 = PIC1, 1 = PIC2, 2 = IOAPIC */
+       __u32 pad;
+        union {
+               char dummy[512];  /* reserving space */
+               struct kvm_pic_state pic;
+               struct kvm_ioapic_state ioapic;
+       } chip;
+};
+
+4.26 KVM_SET_IRQCHIP
+
+Capability: KVM_CAP_IRQCHIP
+Architectures: x86, ia64
+Type: vm ioctl
+Parameters: struct kvm_irqchip (in)
+Returns: 0 on success, -1 on error
+
+Sets the state of a kernel interrupt controller created with
+KVM_CREATE_IRQCHIP from a buffer provided by the caller.
+
+struct kvm_irqchip {
+       __u32 chip_id;  /* 0 = PIC1, 1 = PIC2, 2 = IOAPIC */
+       __u32 pad;
+        union {
+               char dummy[512];  /* reserving space */
+               struct kvm_pic_state pic;
+               struct kvm_ioapic_state ioapic;
+       } chip;
+};
+
+4.27 KVM_XEN_HVM_CONFIG
+
+Capability: KVM_CAP_XEN_HVM
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_xen_hvm_config (in)
+Returns: 0 on success, -1 on error
+
+Sets the MSR that the Xen HVM guest uses to initialize its hypercall
+page, and provides the starting address and size of the hypercall
+blobs in userspace.  When the guest writes the MSR, kvm copies one
+page of a blob (32- or 64-bit, depending on the vcpu mode) to guest
+memory.
+
+struct kvm_xen_hvm_config {
+       __u32 flags;
+       __u32 msr;
+       __u64 blob_addr_32;
+       __u64 blob_addr_64;
+       __u8 blob_size_32;
+       __u8 blob_size_64;
+       __u8 pad2[30];
+};
+
+4.27 KVM_GET_CLOCK
+
+Capability: KVM_CAP_ADJUST_CLOCK
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_clock_data (out)
+Returns: 0 on success, -1 on error
+
+Gets the current timestamp of kvmclock as seen by the current guest. In
+conjunction with KVM_SET_CLOCK, it is used to ensure monotonicity on scenarios
+such as migration.
+
+struct kvm_clock_data {
+       __u64 clock;  /* kvmclock current value */
+       __u32 flags;
+       __u32 pad[9];
+};
+
+4.28 KVM_SET_CLOCK
+
+Capability: KVM_CAP_ADJUST_CLOCK
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_clock_data (in)
+Returns: 0 on success, -1 on error
+
+Sets the current timestamp of kvmclock to the valued specific in its parameter.
+In conjunction with KVM_GET_CLOCK, it is used to ensure monotonicity on scenarios
+such as migration.
+
+struct kvm_clock_data {
+       __u64 clock;  /* kvmclock current value */
+       __u32 flags;
+       __u32 pad[9];
+};
+
+4.29 KVM_GET_VCPU_EVENTS
+
+Capability: KVM_CAP_VCPU_EVENTS
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_vcpu_event (out)
+Returns: 0 on success, -1 on error
+
+Gets currently pending exceptions, interrupts, and NMIs as well as related
+states of the vcpu.
+
+struct kvm_vcpu_events {
+       struct {
+               __u8 injected;
+               __u8 nr;
+               __u8 has_error_code;
+               __u8 pad;
+               __u32 error_code;
+       } exception;
+       struct {
+               __u8 injected;
+               __u8 nr;
+               __u8 soft;
+               __u8 pad;
+       } interrupt;
+       struct {
+               __u8 injected;
+               __u8 pending;
+               __u8 masked;
+               __u8 pad;
+       } nmi;
+       __u32 sipi_vector;
+       __u32 flags;   /* must be zero */
+};
+
+4.30 KVM_SET_VCPU_EVENTS
+
+Capability: KVM_CAP_VCPU_EVENTS
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_vcpu_event (in)
+Returns: 0 on success, -1 on error
+
+Set pending exceptions, interrupts, and NMIs as well as related states of the
+vcpu.
+
+See KVM_GET_VCPU_EVENTS for the data structure.
+
+
 5. The kvm_run structure
 
 Application code obtains a pointer to the kvm_run structure by