ISAPNP ISA PnP code is enabled.
ISDN Appropriate ISDN support is enabled.
JOY Appropriate joystick support is enabled.
+ LIBATA Libata driver is enabled
LP Printer support is enabled.
LOOP Loopback device support is enabled.
M68k M68k architecture is enabled.
Documentation/scsi/.
SELINUX SELinux support is enabled.
SERIAL Serial support is enabled.
+ SH SuperH architecture is enabled.
SMP The kernel is an SMP kernel.
SPARC Sparc architecture is enabled.
SWSUSP Software suspend is enabled.
Do not modify the syntax of boot loader parameters without extreme
need or coordination with <Documentation/i386/boot.txt>.
+There are also arch-specific kernel-parameters not documented here.
+See for example <Documentation/x86_64/boot-options.txt>.
+
Note that ALL kernel parameters listed below are CASE SENSITIVE, and that
a trailing = on the name of any parameter states that that parameter will
be entered as an environment variable, whereas its absence indicates that
See header of drivers/scsi/53c7xx.c.
See also Documentation/scsi/ncr53c7xx.txt.
- acpi= [HW,ACPI] Advanced Configuration and Power Interface
+ acpi= [HW,ACPI,X86-64,i386]
+ Advanced Configuration and Power Interface
Format: { force | off | ht | strict | noirq }
force -- enable ACPI if default was off
off -- disable ACPI if default was on
acpi_skip_timer_override [HW,ACPI]
Recognize and ignore IRQ0/pin2 Interrupt Override.
For broken nForce2 BIOS resulting in XT-PIC timer.
+ acpi_use_timer_override [HW,ACPI}
+ Use timer override. For some broken Nvidia NF5 boards
+ that require a timer override, but don't have
+ HPET
acpi_dbg_layer= [HW,ACPI]
Format: <int>
clocksource is not available, it defaults to PIT.
Format: { pit | tsc | cyclone | pmtmr }
+ code_bytes [IA32] How many bytes of object code to print in an
+ oops report.
+ Range: 0 - 8192
+ Default: 64
+
disable_8254_timer
enable_8254_timer
[IA32/X86_64] Disable/Enable interrupt 0 timer routing
dtc3181e= [HW,SCSI]
- earlyprintk= [IA-32,X86-64]
+ earlyprintk= [IA-32,X86-64,SH]
earlyprintk=vga
earlyprintk=serial[,ttySn[,baudrate]]
eurwdt= [HW,WDT] Eurotech CPU-1220/1410 onboard watchdog.
Format: <io>[,<irq>]
+ failslab=
+ fail_page_alloc=
+ fail_make_request=[KNL]
+ General fault injection mechanism.
+ Format: <interval>,<probability>,<space>,<times>
+ See also /Documentation/fault-injection/.
+
fd_mcs= [HW,SCSI]
See header of drivers/scsi/fd_mcs.c.
floppy= [HW]
See Documentation/floppy.txt.
- ftape= [HW] Floppy Tape subsystem debugging options.
- See Documentation/ftape.txt.
-
gamecon.map[2|3]=
[HW,JOY] Multisystem joystick and NES/SNES/PSX pad
support via parallel port (up to 5 devices per port)
highmem otherwise. This also works to reduce highmem
size on bigger boxes.
+ highres= [KNL] Enable/disable high resolution timer mode.
+ Valid parameters: "on", "off"
+ Default: "on"
+
hisax= [HW,ISDN]
See Documentation/isdn/README.HiSax.
hugepages= [HW,IA-32,IA-64] Maximal number of HugeTLB pages.
- noirqbalance [IA-32,SMP,KNL] Disable kernel irq balancing
-
i8042.direct [HW] Put keyboard port into non-translated mode
i8042.dumbkbd [HW] Pretend that controller can only read data from
keyboard and cannot control its state
idle= [HW]
Format: idle=poll or idle=halt
+ ignore_loglevel [KNL]
+ Ignore loglevel setting - this will print /all/
+ kernel messages to the console. Useful for debugging.
+
ihash_entries= [KNL]
Set number of hash buckets for inode cache.
Format: <RDP>,<reset>,<pci_scan>,<verbosity>
isolcpus= [KNL,SMP] Isolate CPUs from the general scheduler.
- Format: <cpu number>,...,<cpu number>
+ Format:
+ <cpu number>,...,<cpu number>
+ or
+ <cpu number>-<cpu number> (must be a positive range in ascending order)
+ or a mixture
+ <cpu number>,...,<cpu number>-<cpu number>
This option can be used to specify one or more CPUs
to isolate from the general SMP balancing and scheduling
algorithms. The only way to move a process onto or off
Format: <1-256>
maxcpus= [SMP] Maximum number of processors that an SMP kernel
- should make use of
+ should make use of.
+ Using "nosmp" or "maxcpus=0" will disable SMP
+ entirely (the MPS table probe still happens, though).
+ A command-line option of "maxcpus=<NUM>", where <NUM>
+ is an integer greater than 0, limits the maximum number
+ of CPUs activated in SMP mode to <NUM>.
+ Using "maxcpus=1" on an SMP kernel is the trivial
+ case of an SMP kernel with only one CPU.
max_addr=[KMG] [KNL,BOOT,ia64] All physical memory greater than or
equal to this physical address is ignored.
emulation library even if a 387 maths coprocessor
is present.
+ noacpi [LIBATA] Disables use of ACPI in libata suspend/resume
+ when set.
+ Format: <int>
+
+ noaliencache [MM, NUMA] Disables the allcoation of alien caches in
+ the slab allocator. Saves per-node memory, but will
+ impact performance on real NUMA hardware.
+
noalign [KNL,ARM]
noapic [SMP,APIC] Tells the kernel to not make use of any
in certain environments such as networked servers or
real-time systems.
+ nohz= [KNL] Boottime enable/disable dynamic ticks
+ Valid arguments: on, off
+ Default: on
+
+ noirqbalance [IA-32,SMP,KNL] Disable kernel irq balancing
+
noirqdebug [IA-32] Disables the code which attempts to detect and
disable unhandled interrupt sources.
+ no_timer_check [IA-32,X86_64,APIC] Disables the code which tests for
+ broken timer IRQ sources.
+
noisapnp [ISAPNP] Disables ISA PnP code.
noinitrd [RAM] Tells the kernel not to load any configured
machine check when some devices' config space
is read. But various workarounds are disabled
and some IOMMU drivers will not work.
+ bfsort Sort PCI devices into breadth-first order.
+ This sorting is done to get a device
+ order compatible with older (<= 2.4) kernels.
+ nobfsort Don't sort PCI devices into breadth-first order.
+ cbiosize=nn[KMG] The fixed amount of bus space which is
+ reserved for the CardBus bridge's IO window.
+ The default value is 256 bytes.
+ cbmemsize=nn[KMG] The fixed amount of bus space which is
+ reserved for the CardBus bridge's memory
+ window. The default value is 64 megabytes.
+
pcmv= [HW,PCMCIA] BadgePAD 4
pd. [PARIDE]
Param: "schedule" - profile schedule points.
Param: <number> - step/bucket size as a power of 2 for
statistical time based profiling.
+ Param: "sleep" - profile D-state sleeping (millisecs)
processor.max_cstate= [HW,ACPI]
Limit processor to maximum C-state
resume= [SWSUSP]
Specify the partition device for software suspend
+ resume_offset= [SWSUSP]
+ Specify the offset from the beginning of the partition
+ given by "resume=" at which the swap header is located,
+ in <PAGE_SIZE> units (needed only for swap files).
+ See Documentation/power/swsusp-and-swap-files.txt
+
+ retain_initrd [RAM] Keep initrd memory after extraction
+
rhash_entries= [KNL,NET]
Set number of hash buckets for route cache
scsi_logging= [SCSI]
+ scsi_mod.scan= [SCSI] sync (default) scans SCSI busses as they are
+ discovered. async scans them in kernel threads,
+ allowing boot to proceed. none ignores them, expecting
+ user space to do the scan.
+
selinux [SELINUX] Disable or enable SELinux at boot time.
Format: { "0" | "1" }
See security/selinux/Kconfig help text.
stifb= [HW]
Format: bpp:<bpp1>[:<bpp2>[:<bpp3>...]]
+ sunrpc.pool_mode=
+ [NFS]
+ Control how the NFS server code allocates CPUs to
+ service thread pools. Depending on how many NICs
+ you have and where their interrupts are bound, this
+ option will affect which CPUs will do NFS serving.
+ Note: this parameter cannot be changed while the
+ NFS server is running.
+
+ auto the server chooses an appropriate mode
+ automatically using heuristics
+ global a single global pool contains all CPUs
+ percpu one pool for each CPU
+ pernode one pool for each NUMA node (equivalent
+ to global on non-NUMA machines)
+
swiotlb= [IA-64] Number of I/O TLB slabs
switches= [HW,M68k]
sym53c416= [HW,SCSI]
See header of drivers/scsi/sym53c416.c.
+ sysrq_always_enabled
+ [KNL]
+ Ignore sysrq setting - this boot parameter will
+ neutralize any effect of /proc/sys/kernel/sysrq.
+ Useful for debugging.
+
t128= [HW,SCSI]
See header of drivers/scsi/t128.c.
uart6850= [HW,OSS]
Format: <io>,<irq>
+ uhci-hcd.ignore_oc=
+ [USB] Ignore overcurrent events (default N).
+ Some badly-designed motherboards generate lots of
+ bogus events, for ports that aren't wired to
+ anything. Set this parameter to avoid log spamming.
+ Note that genuine overcurrent events won't be
+ reported either.
+
+ usbcore.autosuspend=
+ [USB] The autosuspend time delay (in seconds) used
+ for newly-detected USB devices (default 2). This
+ is the time required before an idle device will be
+ autosuspended. Devices for which the delay is set
+ to 0 won't be autosuspended at all.
+
usbhid.mousepoll=
[USBHID] The interval which mice are to be polled at.
- vdso= [IA-32]
+ vdso= [IA-32,SH]
vdso=1: enable VDSO (default)
vdso=0: disable VDSO mapping
norandmaps Don't use address space randomization
Equivalent to echo 0 > /proc/sys/kernel/randomize_va_space
+ unwind_debug=N N > 0 will enable dwarf2 unwinder debugging
+ This is useful to get more information why
+ you got a "dwarf2 unwinder stuck"
______________________________________________________________________