it will appear as a kernel argument readable via /proc/cmdline by programs
running once the system is up.
+The number of kernel parameters is not limited, but the length of the
+complete command line (parameters including spaces etc.) is limited to
+a fixed number of characters. This limit depends on the architecture
+and is between 256 and 4096 characters. It is defined in the file
+./include/asm/setup.h as COMMAND_LINE_SIZE.
+
+
53c7xx= [HW,SCSI] Amiga SCSI controllers
See header of drivers/scsi/53c7xx.c.
See also Documentation/scsi/ncr53c7xx.txt.
debug [KNL] Enable kernel debugging (events log level).
+ debug_locks_verbose=
+ [KNL] verbose self-tests
+ Format=<0|1>
+ Print debugging info while doing the locking API
+ self-tests.
+ We default to 0 (no extra messages), setting it to
+ 1 will print _a lot_ more information - normally
+ only useful to kernel developers.
+
decnet= [HW,NET]
Format: <area>[,<node>]
See also Documentation/networking/decnet.txt.
gscd= [HW,CD]
Format: <io>
- gt96100eth= [NET] MIPS GT96100 Advanced Communication Controller
-
gus= [HW,OSS]
Format: <io>,<irq>,<dma>,<dma16>
ips= [HW,SCSI] Adaptec / IBM ServeRAID controller
See header of drivers/scsi/ips.c.
+ ports= [IP_VS_FTP] IPVS ftp helper module
+ Default is 21.
+ Up to 8 (IP_VS_APP_MAX_PORTS) ports
+ may be specified.
+ Format: <port>,<port>....
+
irqfixup [HW]
When an interrupt is not handled search all handlers
for it. Intended to get systems with badly broken
nocache [ARM]
+ nodelayacct [KNL] Disable per-task delay accounting
+
nodisconnect [HW,SCSI,M68K] Disables SCSI disconnects.
noexec [IA-64]
bootloader. This is currently used on
IXP2000 systems where the bus has to be
configured a certain way for adjunct CPUs.
-
+ noearly [X86] Don't do any early type 1 scanning.
+ This might help on some broken boards which
+ machine check when some devices' config space
+ is read. But various workarounds are disabled
+ and some IOMMU drivers will not work.
pcmv= [HW,PCMCIA] BadgePAD 4
pd. [PARIDE]
pt. [PARIDE]
See Documentation/paride.txt.
- quiet= [KNL] Disable log messages
+ quiet [KNL] Disable most log messages
r128= [HW,DRM]
reserve= [KNL,BUGS] Force the kernel to ignore some iomem area
+ reservetop= [IA-32]
+ Format: nn[KMG]
+ Reserves a hole at the top of the kernel virtual
+ address space.
+
+ reset_devices [KNL] Force drivers to reset the underlying device
+ during initialization.
+
resume= [SWSUSP]
Specify the partition device for software suspend
usbhid.mousepoll=
[USBHID] The interval which mice are to be polled at.
+ vdso= [IA-32]
+ vdso=1: enable VDSO (default)
+ vdso=0: disable VDSO mapping
+
video= [FB] Frame buffer configuration
See Documentation/fb/modedb.txt.
decrease the size and leave more room for directly
mapped kernel RAM.
- vmhalt= [KNL,S390]
+ vmhalt= [KNL,S390] Perform z/VM CP command after system halt.
+ Format: <command>
+
+ vmpanic= [KNL,S390] Perform z/VM CP command after kernel panic.
+ Format: <command>
- vmpoff= [KNL,S390]
+ vmpoff= [KNL,S390] Perform z/VM CP command after power off.
+ Format: <command>
waveartist= [HW,OSS]
Format: <io>,<irq>,<dma>,<dma2>