ALSA: asihpi - Add support for new ASI8800 family

[safe/jmp/linux-2.6] / Documentation / input / atarikbd.txt

diff --git a/Documentation/input/atarikbd.txt b/Documentation/input/atarikbd.txt
index 1b00ad7..f3a3ba8 100644 (file)
--- a/Documentation/input/atarikbd.txt
+++ b/Documentation/input/atarikbd.txt
@@ -170,7 +170,7 @@ major controller faults (ROM checksum and RAM test) and such things as stuck
 keys. Any keys down at power-up are presumed to be stuck, and their BREAK
 (sic) code is returned (which without the preceding MAKE code is a flag for a
 keyboard error). If the controller self-test completes without error, the code
-0xF0 is returned. (This code will be used to indicate the version/rlease of
+0xF0 is returned. (This code will be used to indicate the version/release of
 the ikbd controller. The first release of the ikbd is version 0xF0, should
 there be a second release it will be 0xF1, and so on.)
 The ikbd defaults to a mouse position reporting with threshold of 1 unit in
@@ -179,9 +179,9 @@ reporting mode for joystick 1, with both buttons being logically assigned to
 the mouse. After any joystick command, the ikbd assumes that joysticks are
 connected to both Joystick0 and Joystick1. Any mouse command (except MOUSE
 DISABLE) then causes port 0 to again be scanned as if it were a mouse, and
-both buttons are logically connected to it. If a mouse diable command is
+both buttons are logically connected to it. If a mouse disable command is
 received while port 0 is presumed to be a mouse, the button is logically
-assigned to Joystick1 ( until the mouse is reenabled by another mouse command).
+assigned to Joystick1 (until the mouse is reenabled by another mouse command).
 
 9. ikbd Command Set
 
@@ -277,8 +277,8 @@ default to 1 at RESET (or power-up).
 9.7 SET MOUSE SCALE
 
     0x0C
-    X                   ; horizontal mouse ticks per internel X
-    Y                   ; vertical mouse ticks per internel Y
+    X                   ; horizontal mouse ticks per internal X
+    Y                   ; vertical mouse ticks per internal Y
 
 This command sets the scale factor for the ABSOLUTE MOUSE POSITIONING mode.
 In this mode, the specified number of mouse phase changes ('clicks') must
@@ -323,7 +323,7 @@ mouse position.
     0x0F
 
 This command makes the origin of the Y axis to be at the bottom of the
-logical coordinate system internel to the ikbd for all relative or absolute
+logical coordinate system internal to the ikbd for all relative or absolute
 mouse motion. This causes mouse motion toward the user to be negative in sign
 and away from the user to be positive.
 
@@ -413,7 +413,7 @@ INTERROGATION MODE.
             %nnnnmmmm   ; where m is JOYSTICK1 state
                         ; and n is JOYSTICK0 state
 
-Sets the ikbd to do nothing but monitor the serial command lne, maintain the
+Sets the ikbd to do nothing but monitor the serial command line, maintain the
 time-of-day clock, and monitor the joystick. The rate sets the interval
 between joystick samples.
 N.B. The user should not set the rate higher than the serial communications
@@ -446,10 +446,10 @@ The sample interval should be as constant as possible.
                         ; until vertical cursor key is generated before RY
                         ; has elapsed
     VX                  ; length (in tenths of seconds) of joystick closure
-                        ; until horizontal cursor keystokes are generated
+                        ; until horizontal cursor keystrokes are generated
                         ; after RX has elapsed
     VY                  ; length (in tenths of seconds) of joystick closure
-                        ; until vertical cursor keystokes are generated
+                        ; until vertical cursor keystrokes are generated
                         ; after RY has elapsed
 
 In this mode, joystick 0 is scanned in a way that simulates cursor keystrokes.
@@ -597,8 +597,8 @@ mode or FIRE BUTTON MONITORING mode.
 
 10. SCAN CODES
 
-The key scan codes return by the ikbd are chosen to simplify the
-implementaion of GSX.
+The key scan codes returned by the ikbd are chosen to simplify the
+implementation of GSX.
 
 GSX Standard Keyboard Mapping.