Prefix: 'it87'
Addresses scanned: from Super I/O config space (8 I/O ports)
Datasheet: Publicly available at the ITE website
- http://www.ite.com.tw/
+ http://www.ite.com.tw/product_info/file/pc/IT8705F_V.0.4.1.pdf
* IT8712F
Prefix: 'it8712'
- Addresses scanned: I2C 0x2d
- from Super I/O config space (8 I/O ports)
+ Addresses scanned: from Super I/O config space (8 I/O ports)
Datasheet: Publicly available at the ITE website
- http://www.ite.com.tw/
- * IT8716F
+ http://www.ite.com.tw/product_info/file/pc/IT8712F_V0.9.1.pdf
+ http://www.ite.com.tw/product_info/file/pc/Errata%20V0.1%20for%20IT8712F%20V0.9.1.pdf
+ http://www.ite.com.tw/product_info/file/pc/IT8712F_V0.9.3.pdf
+ * IT8716F/IT8726F
Prefix: 'it8716'
Addresses scanned: from Super I/O config space (8 I/O ports)
Datasheet: Publicly available at the ITE website
http://www.ite.com.tw/product_info/file/pc/IT8716F_V0.3.ZIP
+ http://www.ite.com.tw/product_info/file/pc/IT8726F_V0.3.pdf
+ * IT8718F
+ Prefix: 'it8718'
+ Addresses scanned: from Super I/O config space (8 I/O ports)
+ Datasheet: Publicly available at the ITE website
+ http://www.ite.com.tw/product_info/file/pc/IT8718F_V0.2.zip
+ http://www.ite.com.tw/product_info/file/pc/IT8718F_V0%203_(for%20C%20version).zip
+ * IT8720F
+ Prefix: 'it8720'
+ Addresses scanned: from Super I/O config space (8 I/O ports)
+ Datasheet: Not yet publicly available.
* SiS950 [clone of IT8705F]
Prefix: 'it87'
Addresses scanned: from Super I/O config space (8 I/O ports)
Datasheet: No longer be available
-Author: Christophe Gauthron <chrisg@0-in.com>
+Authors:
+ Christophe Gauthron
+ Jean Delvare <khali@linux-fr.org>
Module Parameters
misconfigured by BIOS - PWM values would be inverted. This option tries
to fix this. Please contact your BIOS manufacturer and ask him for fix.
+
+Hardware Interfaces
+-------------------
+
+All the chips suported by this driver are LPC Super-I/O chips, accessed
+through the LPC bus (ISA-like I/O ports). The IT8712F additionally has an
+SMBus interface to the hardware monitoring functions. This driver no
+longer supports this interface though, as it is slower and less reliable
+than the ISA access, and was only available on a small number of
+motherboard models.
+
+
Description
-----------
-This driver implements support for the IT8705F, IT8712F, IT8716F and
-SiS950 chips.
+This driver implements support for the IT8705F, IT8712F, IT8716F,
+IT8718F, IT8720F, IT8726F and SiS950 chips.
These chips are 'Super I/O chips', supporting floppy disks, infrared ports,
joysticks and other miscellaneous stuff. For hardware monitoring, they
though, so the functionality may not be available on a given system.
The driver dumbly assume it is there.
-The IT8716F and later IT8712F revisions have support for 2 additional
-fans. They are not yet supported by the driver.
+The IT8718F and IT8720F also features VID inputs (up to 8 pins) but the value
+is stored in the Super-I/O configuration space. Due to technical limitations,
+this value can currently only be read once at initialization time, so
+the driver won't notice and report changes in the VID value. The two
+upper VID bits share their pins with voltage inputs (in5 and in6) so you
+can't have both on a given board.
+
+The IT8716F, IT8718F, IT8720F and later IT8712F revisions have support for
+2 additional fans. The additional fans are supported by the driver.
-The IT8716F and late IT8712F and IT8705F also have optional 16-bit
-tachometer counters for fans 1 to 3. This is better (no more fan
-clock divider mess) but not compatible with the older chips and
-revisions. For now, the driver only uses the 16-bit mode on the
-IT8716F.
+The IT8716F, IT8718F and IT8720F, and late IT8712F and IT8705F also have
+optional 16-bit tachometer counters for fans 1 to 3. This is better (no more
+fan clock divider mess) but not compatible with the older chips and
+revisions. The 16-bit tachometer mode is enabled by the driver when one
+of the above chips is detected.
+
+The IT8726F is just bit enhanced IT8716F with additional hardware
+for AMD power sequencing. Therefore the chip will appear as IT8716F
+to userspace applications.
Temperatures are measured in degrees Celsius. An alarm is triggered once
when the Overtemperature Shutdown limit is crossed.
inputs can measure voltages between 0 and 4.08 volts, with a resolution of
0.016 volt. The battery voltage in8 does not have limit registers.
-The VID lines (IT8712F/IT8716F) encode the core voltage value: the voltage
-level your processor should work with. This is hardcoded by the mainboard
-and/or processor itself. It is a value in volts.
+The VID lines (IT8712F/IT8716F/IT8718F/IT8720F) encode the core voltage value:
+the voltage level your processor should work with. This is hardcoded by
+the mainboard and/or processor itself. It is a value in volts.
If an alarm triggers, it will remain triggered until the hardware register
is read at least once. This means that the cause for the alarm may already
The IT87xx only updates its values each 1.5 seconds; reading it more often
will do no harm, but will return 'old' values.
-To change sensor N to a thermistor, 'echo 2 > tempN_type' where N is 1, 2,
+To change sensor N to a thermistor, 'echo 4 > tempN_type' where N is 1, 2,
or 3. To change sensor N to a thermal diode, 'echo 3 > tempN_type'.
Give 0 for unused sensor. Any other value is invalid. To configure this at
-startup, consult lm_sensors's /etc/sensors.conf. (2 = thermistor;
+startup, consult lm_sensors's /etc/sensors.conf. (4 = thermistor;
3 = thermal diode)
+
+Fan speed control
+-----------------
+
The fan speed control features are limited to manual PWM mode. Automatic
"Smart Guardian" mode control handling is not implemented. However
if you want to go for "manual mode" just write 1 to pwmN_enable.
+
+If you are only able to control the fan speed with very small PWM values,
+try lowering the PWM base frequency (pwm1_freq). Depending on the fan,
+it may give you a somewhat greater control range. The same frequency is
+used to drive all fan outputs, which is why pwm2_freq and pwm3_freq are
+read-only.
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff