---------------------------
-What: /sys/devices/.../power/state
- dev->power.power_state
- dpm_runtime_{suspend,resume)()
-When: July 2007
-Why: Broken design for runtime control over driver power states, confusing
- driver-internal runtime power management with: mechanisms to support
- system-wide sleep state transitions; event codes that distinguish
- different phases of swsusp "sleep" transitions; and userspace policy
- inputs. This framework was never widely used, and most attempts to
- use it were broken. Drivers should instead be exposing domain-specific
- interfaces either to kernel or to userspace.
-Who: Pavel Machek <pavel@suse.cz>
+What: IRQF_SAMPLE_RANDOM
+Check: IRQF_SAMPLE_RANDOM
+When: July 2009
----------------------------
+Why: Many of IRQF_SAMPLE_RANDOM users are technically bogus as entropy
+ sources in the kernel's current entropy model. To resolve this, every
+ input point to the kernel's entropy pool needs to better document the
+ type of entropy source it actually is. This will be replaced with
+ additional add_*_randomness functions in drivers/char/random.c
-What: RAW driver (CONFIG_RAW_DRIVER)
-When: December 2005
-Why: declared obsolete since kernel 2.6.3
- O_DIRECT can be used instead
-Who: Adrian Bunk <bunk@stusta.de>
+Who: Robin Getz <rgetz@blackfin.uclinux.org> & Matt Mackall <mpm@selenic.com>
---------------------------
-What: raw1394: requests of type RAW1394_REQ_ISO_SEND, RAW1394_REQ_ISO_LISTEN
-When: June 2007
-Why: Deprecated in favour of the more efficient and robust rawiso interface.
- Affected are applications which use the deprecated part of libraw1394
- (raw1394_iso_write, raw1394_start_iso_write, raw1394_start_iso_rcv,
- raw1394_stop_iso_rcv) or bypass libraw1394.
-Who: Dan Dennedy <dan@dennedy.org>, Stefan Richter <stefanr@s5r6.in-berlin.de>
+What: The ieee80211_regdom module parameter
+When: March 2010 / desktop catchup
----------------------------
+Why: This was inherited by the CONFIG_WIRELESS_OLD_REGULATORY code,
+ and currently serves as an option for users to define an
+ ISO / IEC 3166 alpha2 code for the country they are currently
+ present in. Although there are userspace API replacements for this
+ through nl80211 distributions haven't yet caught up with implementing
+ decent alternatives through standard GUIs. Although available as an
+ option through iw or wpa_supplicant its just a matter of time before
+ distributions pick up good GUI options for this. The ideal solution
+ would actually consist of intelligent designs which would do this for
+ the user automatically even when travelling through different countries.
+ Until then we leave this module parameter as a compromise.
+
+ When userspace improves with reasonable widely-available alternatives for
+ this we will no longer need this module parameter. This entry hopes that
+ by the super-futuristically looking date of "March 2010" we will have
+ such replacements widely available.
-What: dv1394 driver (CONFIG_IEEE1394_DV1394)
-When: June 2007
-Why: Replaced by raw1394 + userspace libraries, notably libiec61883. This
- shift of application support has been indicated on www.linux1394.org
- and developers' mailinglists for quite some time. Major applications
- have been converted, with the exception of ffmpeg and hence xine.
- Piped output of dvgrab2 is a partial equivalent to dv1394.
-Who: Dan Dennedy <dan@dennedy.org>, Stefan Richter <stefanr@s5r6.in-berlin.de>
+Who: Luis R. Rodriguez <lrodriguez@atheros.com>
---------------------------
-What: ieee1394 core's unused exports (CONFIG_IEEE1394_EXPORT_FULL_API)
-When: January 2007
-Why: There are no projects known to use these exported symbols, except
- dfg1394 (uses one symbol whose functionality is core-internal now).
-Who: Stefan Richter <stefanr@s5r6.in-berlin.de>
+What: CONFIG_WIRELESS_OLD_REGULATORY - old static regulatory information
+When: March 2010 / desktop catchup
+
+Why: The old regulatory infrastructure has been replaced with a new one
+ which does not require statically defined regulatory domains. We do
+ not want to keep static regulatory domains in the kernel due to the
+ the dynamic nature of regulatory law and localization. We kept around
+ the old static definitions for the regulatory domains of:
+
+ * US
+ * JP
+ * EU
+
+ and used by default the US when CONFIG_WIRELESS_OLD_REGULATORY was
+ set. We will remove this option once the standard Linux desktop catches
+ up with the new userspace APIs we have implemented.
+
+Who: Luis R. Rodriguez <lrodriguez@atheros.com>
---------------------------
-What: ieee1394's *_oui sysfs attributes (CONFIG_IEEE1394_OUI_DB)
-When: January 2007
-Files: drivers/ieee1394/: oui.db, oui2c.sh
-Why: big size, little value
-Who: Stefan Richter <stefanr@s5r6.in-berlin.de>
+What: dev->power.power_state
+When: July 2007
+Why: Broken design for runtime control over driver power states, confusing
+ driver-internal runtime power management with: mechanisms to support
+ system-wide sleep state transitions; event codes that distinguish
+ different phases of swsusp "sleep" transitions; and userspace policy
+ inputs. This framework was never widely used, and most attempts to
+ use it were broken. Drivers should instead be exposing domain-specific
+ interfaces either to kernel or to userspace.
+Who: Pavel Machek <pavel@suse.cz>
---------------------------
-What: Video4Linux API 1 ioctls and video_decoder.h from Video devices.
-When: December 2006
-Why: V4L1 AP1 was replaced by V4L2 API. during migration from 2.4 to 2.6
+What: Video4Linux API 1 ioctls and from Video devices.
+When: July 2009
+Files: include/linux/videodev.h
+Check: include/linux/videodev.h
+Why: V4L1 AP1 was replaced by V4L2 API during migration from 2.4 to 2.6
series. The old API have lots of drawbacks and don't provide enough
means to work with all video and audio standards. The newer API is
already available on the main drivers and should be used instead.
Decoder iocts are using internally to allow video drivers to
communicate with video decoders. This should also be improved to allow
V4L2 calls being translated into compatible internal ioctls.
-Who: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
+ Compatibility ioctls will be provided, for a while, via
+ v4l1-compat module.
+Who: Mauro Carvalho Chehab <mchehab@infradead.org>
---------------------------
---------------------------
+What: sys_sysctl
+When: September 2010
+Option: CONFIG_SYSCTL_SYSCALL
+Why: The same information is available in a more convenient from
+ /proc/sys, and none of the sysctl variables appear to be
+ important performance wise.
+
+ Binary sysctls are a long standing source of subtle kernel
+ bugs and security issues.
+
+ When I looked several months ago all I could find after
+ searching several distributions were 5 user space programs and
+ glibc (which falls back to /proc/sys) using this syscall.
+
+ The man page for sysctl(2) documents it as unusable for user
+ space programs.
+
+ sysctl(2) is not generally ABI compatible to a 32bit user
+ space application on a 64bit and a 32bit kernel.
+
+ For the last several months the policy has been no new binary
+ sysctls and no one has put forward an argument to use them.
+
+ Binary sysctls issues seem to keep happening appearing so
+ properly deprecating them (with a warning to user space) and a
+ 2 year grace warning period will mean eventually we can kill
+ them and end the pain.
+
+ In the mean time individual binary sysctls can be dealt with
+ in a piecewise fashion.
+
+Who: Eric Biederman <ebiederm@xmission.com>
+
+---------------------------
+
What: remove EXPORT_SYMBOL(kernel_thread)
When: August 2006
Files: arch/*/kernel/*_ksyms.c
+Check: kernel_thread
Why: kernel_thread is a low-level implementation detail. Drivers should
use the <linux/kthread.h> API instead which shields them from
implementation details and provides a higherlevel interface that
---------------------------
-What: CONFIG_FORCED_INLINING
-When: June 2006
-Why: Config option is there to see if gcc is good enough. (in january
- 2006). If it is, the behavior should just be the default. If it's not,
- the option should just go away entirely.
-Who: Arjan van de Ven
+What: Unused EXPORT_SYMBOL/EXPORT_SYMBOL_GPL exports
+ (temporary transition config option provided until then)
+ The transition config option will also be removed at the same time.
+When: before 2.6.19
+Why: Unused symbols are both increasing the size of the kernel binary
+ and are often a sign of "wrong API"
+Who: Arjan van de Ven <arjan@linux.intel.com>
---------------------------
-What: eepro100 network driver
-When: January 2007
-Why: replaced by the e100 driver
-Who: Adrian Bunk <bunk@stusta.de>
+What: PHYSDEVPATH, PHYSDEVBUS, PHYSDEVDRIVER in the uevent environment
+When: October 2008
+Why: The stacking of class devices makes these values misleading and
+ inconsistent.
+ Class devices should not carry any of these properties, and bus
+ devices have SUBSYTEM and DRIVER as a replacement.
+Who: Kay Sievers <kay.sievers@suse.de>
---------------------------
-What: drivers depending on OSS_OBSOLETE_DRIVER
-When: options in 2.6.20, code in 2.6.22
-Why: OSS drivers with ALSA replacements
-Who: Adrian Bunk <bunk@stusta.de>
+What: ACPI procfs interface
+When: July 2008
+Why: ACPI sysfs conversion should be finished by January 2008.
+ ACPI procfs interface will be removed in July 2008 so that
+ there is enough time for the user space to catch up.
+Who: Zhang Rui <rui.zhang@intel.com>
---------------------------
-What: pci_module_init(driver)
-When: January 2007
-Why: Is replaced by pci_register_driver(pci_driver).
-Who: Richard Knutsson <ricknu-0@student.ltu.se> and Greg Kroah-Hartman <gregkh@suse.de>
+What: /proc/acpi/button
+When: August 2007
+Why: /proc/acpi/button has been replaced by events to the input layer
+ since 2.6.20.
+Who: Len Brown <len.brown@intel.com>
---------------------------
-What: Usage of invalid timevals in setitimer
-When: March 2007
-Why: POSIX requires to validate timevals in the setitimer call. This
- was never done by Linux. The invalid (e.g. negative timevals) were
- silently converted to more or less random timeouts and intervals.
- Until the removal a per boot limited number of warnings is printed
- and the timevals are sanitized.
+What: /proc/acpi/event
+When: February 2008
+Why: /proc/acpi/event has been replaced by events via the input layer
+ and netlink since 2.6.23.
+Who: Len Brown <len.brown@intel.com>
+
+---------------------------
+
+What: libata spindown skipping and warning
+When: Dec 2008
+Why: Some halt(8) implementations synchronize caches for and spin
+ down libata disks because libata didn't use to spin down disk on
+ system halt (only synchronized caches).
+ Spin down on system halt is now implemented. sysfs node
+ /sys/class/scsi_disk/h:c:i:l/manage_start_stop is present if
+ spin down support is available.
+ Because issuing spin down command to an already spun down disk
+ makes some disks spin up just to spin down again, libata tracks
+ device spindown status to skip the extra spindown command and
+ warn about it.
+ This is to give userspace tools the time to get updated and will
+ be removed after userspace is reasonably updated.
+Who: Tejun Heo <htejun@gmail.com>
+
+---------------------------
+What: i386/x86_64 bzImage symlinks
+When: April 2010
+
+Why: The i386/x86_64 merge provides a symlink to the old bzImage
+ location so not yet updated user space tools, e.g. package
+ scripts, do not break.
Who: Thomas Gleixner <tglx@linutronix.de>
---------------------------
-What: Unused EXPORT_SYMBOL/EXPORT_SYMBOL_GPL exports
- (temporary transition config option provided until then)
- The transition config option will also be removed at the same time.
-When: before 2.6.19
-Why: Unused symbols are both increasing the size of the kernel binary
- and are often a sign of "wrong API"
-Who: Arjan van de Ven <arjan@linux.intel.com>
+What (Why):
+ - include/linux/netfilter_ipv4/ipt_TOS.h ipt_tos.h header files
+ (superseded by xt_TOS/xt_tos target & match)
+
+ - "forwarding" header files like ipt_mac.h in
+ include/linux/netfilter_ipv4/ and include/linux/netfilter_ipv6/
+
+ - xt_CONNMARK match revision 0
+ (superseded by xt_CONNMARK match revision 1)
+
+ - xt_MARK target revisions 0 and 1
+ (superseded by xt_MARK match revision 2)
+
+ - xt_connmark match revision 0
+ (superseded by xt_connmark match revision 1)
+
+ - xt_conntrack match revision 0
+ (superseded by xt_conntrack match revision 1)
+
+ - xt_iprange match revision 0,
+ include/linux/netfilter_ipv4/ipt_iprange.h
+ (superseded by xt_iprange match revision 1)
+
+ - xt_mark match revision 0
+ (superseded by xt_mark match revision 1)
+
+ - xt_recent: the old ipt_recent proc dir
+ (superseded by /proc/net/xt_recent)
+
+When: January 2009 or Linux 2.7.0, whichever comes first
+Why: Superseded by newer revisions or modules
+Who: Jan Engelhardt <jengelh@computergmbh.de>
---------------------------
-What: mount/umount uevents
-When: February 2007
-Why: These events are not correct, and do not properly let userspace know
- when a file system has been mounted or unmounted. Userspace should
- poll the /proc/mounts file instead to detect this properly.
-Who: Greg Kroah-Hartman <gregkh@suse.de>
+What: GPIO autorequest on gpio_direction_{input,output}() in gpiolib
+When: February 2010
+Why: All callers should use explicit gpio_request()/gpio_free().
+ The autorequest mechanism in gpiolib was provided mostly as a
+ migration aid for legacy GPIO interfaces (for SOC based GPIOs).
+ Those users have now largely migrated. Platforms implementing
+ the GPIO interfaces without using gpiolib will see no changes.
+Who: David Brownell <dbrownell@users.sourceforge.net>
+---------------------------
+
+What: b43 support for firmware revision < 410
+When: The schedule was July 2008, but it was decided that we are going to keep the
+ code as long as there are no major maintanance headaches.
+ So it _could_ be removed _any_ time now, if it conflicts with something new.
+Why: The support code for the old firmware hurts code readability/maintainability
+ and slightly hurts runtime performance. Bugfixes for the old firmware
+ are not provided by Broadcom anymore.
+Who: Michael Buesch <mb@bu3sch.de>
---------------------------
-What: USB driver API moves to EXPORT_SYMBOL_GPL
-When: February 2008
-Files: include/linux/usb.h, drivers/usb/core/driver.c
-Why: The USB subsystem has changed a lot over time, and it has been
- possible to create userspace USB drivers using usbfs/libusb/gadgetfs
- that operate as fast as the USB bus allows. Because of this, the USB
- subsystem will not be allowing closed source kernel drivers to
- register with it, after this grace period is over. If anyone needs
- any help in converting their closed source drivers over to use the
- userspace filesystems, please contact the
- linux-usb-devel@lists.sourceforge.net mailing list, and the developers
- there will be glad to help you out.
-Who: Greg Kroah-Hartman <gregkh@suse.de>
+What: usedac i386 kernel parameter
+When: 2.6.27
+Why: replaced by allowdac and no dac combination
+Who: Glauber Costa <gcosta@redhat.com>
---------------------------
-What: find_trylock_page
-When: January 2007
-Why: The interface no longer has any callers left in the kernel. It
- is an odd interface (compared with other find_*_page functions), in
- that it does not take a refcount to the page, only the page lock.
- It should be replaced with find_get_page or find_lock_page if possible.
- This feature removal can be reevaluated if users of the interface
- cannot cleanly use something else.
-Who: Nick Piggin <npiggin@suse.de>
+What: print_fn_descriptor_symbol()
+When: October 2009
+Why: The %pF vsprintf format provides the same functionality in a
+ simpler way. print_fn_descriptor_symbol() is deprecated but
+ still present to give out-of-tree modules time to change.
+Who: Bjorn Helgaas <bjorn.helgaas@hp.com>
---------------------------
-What: Interrupt only SA_* flags
-When: Januar 2007
-Why: The interrupt related SA_* flags are replaced by IRQF_* to move them
- out of the signal namespace.
+What: /sys/o2cb symlink
+When: January 2010
+Why: /sys/fs/o2cb is the proper location for this information - /sys/o2cb
+ exists as a symlink for backwards compatibility for old versions of
+ ocfs2-tools. 2 years should be sufficient time to phase in new versions
+ which know to look in /sys/fs/o2cb.
+Who: ocfs2-devel@oss.oracle.com
-Who: Thomas Gleixner <tglx@linutronix.de>
+---------------------------
+
+What: SCTP_GET_PEER_ADDRS_NUM_OLD, SCTP_GET_PEER_ADDRS_OLD,
+ SCTP_GET_LOCAL_ADDRS_NUM_OLD, SCTP_GET_LOCAL_ADDRS_OLD
+When: June 2009
+Why: A newer version of the options have been introduced in 2005 that
+ removes the limitions of the old API. The sctp library has been
+ converted to use these new options at the same time. Any user
+ space app that directly uses the old options should convert to using
+ the new options.
+Who: Vlad Yasevich <vladislav.yasevich@hp.com>
---------------------------
-What: PHYSDEVPATH, PHYSDEVBUS, PHYSDEVDRIVER in the uevent environment
-When: October 2008
-Why: The stacking of class devices makes these values misleading and
- inconsistent.
- Class devices should not carry any of these properties, and bus
- devices have SUBSYTEM and DRIVER as a replacement.
-Who: Kay Sievers <kay.sievers@suse.de>
+What: Ability for non root users to shm_get hugetlb pages based on mlock
+ resource limits
+When: 2.6.31
+Why: Non root users need to be part of /proc/sys/vm/hugetlb_shm_group or
+ have CAP_IPC_LOCK to be able to allocate shm segments backed by
+ huge pages. The mlock based rlimit check to allow shm hugetlb is
+ inconsistent with mmap based allocations. Hence it is being
+ deprecated.
+Who: Ravikiran Thirumalai <kiran@scalex86.org>
---------------------------
-What: i2c-isa
-When: December 2006
-Why: i2c-isa is a non-sense and doesn't fit in the device driver
- model. Drivers relying on it are better implemented as platform
- drivers.
-Who: Jean Delvare <khali@linux-fr.org>
+What: CONFIG_THERMAL_HWMON
+When: January 2009
+Why: This option was introduced just to allow older lm-sensors userspace
+ to keep working over the upgrade to 2.6.26. At the scheduled time of
+ removal fixed lm-sensors (2.x or 3.x) should be readily available.
+Who: Rene Herman <rene.herman@gmail.com>
---------------------------
-What: i2c_adapter.dev
- i2c_adapter.list
-When: July 2007
-Why: Superfluous, given i2c_adapter.class_dev:
- * The "dev" was a stand-in for the physical device node that legacy
- drivers would not have; but now it's almost always present. Any
- remaining legacy drivers must upgrade (they now trigger warnings).
- * The "list" duplicates class device children.
- The delay in removing this is so upgraded lm_sensors and libsensors
- can get deployed. (Removal causes minor changes in the sysfs layout,
- notably the location of the adapter type name and parenting the i2c
- client hardware directly from their controller.)
-Who: Jean Delvare <khali@linux-fr.org>,
- David Brownell <dbrownell@users.sourceforge.net>
+What: Code that is now under CONFIG_WIRELESS_EXT_SYSFS
+ (in net/core/net-sysfs.c)
+When: After the only user (hal) has seen a release with the patches
+ for enough time, probably some time in 2010.
+Why: Over 1K .text/.data size reduction, data is available in other
+ ways (ioctls)
+Who: Johannes Berg <johannes@sipsolutions.net>
---------------------------
-What: IPv4 only connection tracking/NAT/helpers
-When: 2.6.22
-Why: The new layer 3 independant connection tracking replaces the old
- IPv4 only version. After some stabilization of the new code the
- old one will be removed.
-Who: Patrick McHardy <kaber@trash.net>
+What: CONFIG_NF_CT_ACCT
+When: 2.6.29
+Why: Accounting can now be enabled/disabled without kernel recompilation.
+ Currently used only to set a default value for a feature that is also
+ controlled by a kernel/module/sysfs/sysctl parameter.
+Who: Krzysztof Piotr Oledzki <ole@ans.pl>
---------------------------
-What: ACPI hooks (X86_SPEEDSTEP_CENTRINO_ACPI) in speedstep-centrino driver
-When: December 2006
-Why: Speedstep-centrino driver with ACPI hooks and acpi-cpufreq driver are
- functionally very much similar. They talk to ACPI in same way. Only
- difference between them is the way they do frequency transitions.
- One uses MSRs and the other one uses IO ports. Functionaliy of
- speedstep_centrino with ACPI hooks is now merged into acpi-cpufreq.
- That means one common driver will support all Intel Enhanced Speedstep
- capable CPUs. That means less confusion over name of
- speedstep-centrino driver (with that driver supposed to be used on
- non-centrino platforms). That means less duplication of code and
- less maintenance effort and no possibility of these two drivers
- going out of sync.
- Current users of speedstep_centrino with ACPI hooks are requested to
- switch over to acpi-cpufreq driver. speedstep-centrino will continue
- to work using older non-ACPI static table based scheme even after this
- date.
-
-Who: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+What: fscher and fscpos drivers
+When: June 2009
+Why: Deprecated by the new fschmd driver.
+Who: Hans de Goede <hdegoede@redhat.com>
+ Jean Delvare <khali@linux-fr.org>
---------------------------
-<<<<<<< test:Documentation/feature-removal-schedule.txt
-What: ACPI hotkey driver (CONFIG_ACPI_HOTKEY)
-When: 2.6.21
-Why: hotkey.c was an attempt to consolidate multiple drivers that use
- ACPI to implement hotkeys. However, hotkeys are not documented
- in the ACPI specification, so the drivers used undocumented
- vendor-specific hooks and turned out to be more different than
- the same.
+What: sysfs ui for changing p4-clockmod parameters
+When: September 2009
+Why: See commits 129f8ae9b1b5be94517da76009ea956e89104ce8 and
+ e088e4c9cdb618675874becb91b2fd581ee707e6.
+ Removal is subject to fixing any remaining bugs in ACPI which may
+ cause the thermal throttling not to happen at the right time.
+Who: Dave Jones <davej@redhat.com>, Matthew Garrett <mjg@redhat.com>
- Further, the keys and the features supplied by each platform
- are different, so there will always be a need for
- platform-specific drivers.
+-----------------------------
- So the new plan is to delete hotkey.c and instead, work on the
- platform specific drivers to try to make them look the same
- to the user when they supply the same features.
+What: __do_IRQ all in one fits nothing interrupt handler
+When: 2.6.32
+Why: __do_IRQ was kept for easy migration to the type flow handlers.
+ More than two years of migration time is enough.
+Who: Thomas Gleixner <tglx@linutronix.de>
- hotkey.c has always depended on CONFIG_EXPERIMENTAL
+-----------------------------
-Who: Len Brown <len.brown@intel.com>
+What: obsolete generic irq defines and typedefs
+When: 2.6.30
+Why: The defines and typedefs (hw_interrupt_type, no_irq_type, irq_desc_t)
+ have been kept around for migration reasons. After more than two years
+ it's time to remove them finally
+Who: Thomas Gleixner <tglx@linutronix.de>
---------------------------
-What: /sys/firmware/acpi/namespace
-When: 2.6.21
-Why: The ACPI namespace is effectively the symbol list for
- the BIOS. The device names are completely arbitrary
- and have no place being exposed to user-space.
+What: fakephp and associated sysfs files in /sys/bus/pci/slots/
+When: 2011
+Why: In 2.6.27, the semantics of /sys/bus/pci/slots was redefined to
+ represent a machine's physical PCI slots. The change in semantics
+ had userspace implications, as the hotplug core no longer allowed
+ drivers to create multiple sysfs files per physical slot (required
+ for multi-function devices, e.g.). fakephp was seen as a developer's
+ tool only, and its interface changed. Too late, we learned that
+ there were some users of the fakephp interface.
- For those interested in the BIOS ACPI namespace,
- the BIOS can be extracted and disassembled with acpidump
- and iasl as documented in the pmtools package here:
- http://ftp.kernel.org/pub/linux/kernel/people/lenb/acpi/utils
-Who: Len Brown <len.brown@intel.com>
+ In 2.6.30, the original fakephp interface was restored. At the same
+ time, the PCI core gained the ability that fakephp provided, namely
+ function-level hot-remove and hot-add.
----------------------------
+ Since the PCI core now provides the same functionality, exposed in:
-What: ACPI procfs interface
-When: July 2007
-Why: After ACPI sysfs conversion, ACPI attributes will be duplicated
- in sysfs and the ACPI procfs interface should be removed.
-Who: Zhang Rui <rui.zhang@intel.com>
+ /sys/bus/pci/rescan
+ /sys/bus/pci/devices/.../remove
+ /sys/bus/pci/devices/.../rescan
----------------------------
+ there is no functional reason to maintain fakephp as well.
-What: /proc/acpi/button
-When: August 2007
-Why: /proc/acpi/button has been replaced by events to the input layer
- since 2.6.20.
-Who: Len Brown <len.brown@intel.com>
+ We will keep the existing module so that 'modprobe fakephp' will
+ present the old /sys/bus/pci/slots/... interface for compatibility,
+ but users are urged to migrate their applications to the API above.
+
+ After a reasonable transition period, we will remove the legacy
+ fakephp interface.
+Who: Alex Chiang <achiang@hp.com>
---------------------------
-What: JFFS (version 1)
-When: 2.6.21
-Why: Unmaintained for years, superceded by JFFS2 for years.
-Who: Jeff Garzik <jeff@garzik.org>
+What: i2c-voodoo3 driver
+When: October 2009
+Why: Superseded by tdfxfb. I2C/DDC support used to live in a separate
+ driver but this caused driver conflicts.
+Who: Jean Delvare <khali@linux-fr.org>
+ Krzysztof Helt <krzysztof.h1@wp.pl>
---------------------------
-What: sk98lin network driver
-When: July 2007
-Why: In kernel tree version of driver is unmaintained. Sk98lin driver
- replaced by the skge driver.
-Who: Stephen Hemminger <shemminger@osdl.org>
+What: CONFIG_RFKILL_INPUT
+When: 2.6.33
+Why: Should be implemented in userspace, policy daemon.
+Who: Johannes Berg <johannes@sipsolutions.net>
+
+----------------------------
+What: CONFIG_X86_OLD_MCE
+When: 2.6.32
+Why: Remove the old legacy 32bit machine check code. This has been
+ superseded by the newer machine check code from the 64bit port,
+ but the old version has been kept around for easier testing. Note this
+ doesn't impact the old P5 and WinChip machine check handlers.
+Who: Andi Kleen <andi@firstfloor.org>
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff