---------------------------
-What: MXSER
-When: December 2007
-Why: Old mxser driver is obsoleted by the mxser_new. Give it some time yet
- and remove it.
-Who: Jiri Slaby <jirislaby@gmail.com>
+What: old static regulatory information and ieee80211_regdom module parameter
+When: 2.6.29
+Why: The old regulatory infrastructure has been replaced with a new one
+ which does not require statically defined regulatory domains. We do
+ not want to keep static regulatory domains in the kernel due to the
+ the dynamic nature of regulatory law and localization. We kept around
+ the old static definitions for the regulatory domains of:
+ * US
+ * JP
+ * EU
+ and used by default the US when CONFIG_WIRELESS_OLD_REGULATORY was
+ set. We also kept around the ieee80211_regdom module parameter in case
+ some applications were relying on it. Changing regulatory domains
+ can now be done instead by using nl80211, as is done with iw.
+Who: Luis R. Rodriguez <lrodriguez@atheros.com>
---------------------------
---------------------------
-What: old NCR53C9x driver
-When: October 2007
-Why: Replaced by the much better esp_scsi driver. Actual low-level
- driver can be ported over almost trivially.
-Who: David Miller <davem@davemloft.net>
- Christoph Hellwig <hch@lst.de>
-
----------------------------
-
What: Video4Linux API 1 ioctls and video_decoder.h from Video devices.
When: December 2008
Files: include/linux/video_decoder.h include/linux/videodev.h
---------------------------
-What: a.out interpreter support for ELF executables
-When: 2.6.25
-Files: fs/binfmt_elf.c
-Why: Using a.out interpreters for ELF executables was a feature for
- transition from a.out to ELF. But now it is unlikely to be still
- needed anymore and removing it would simplify the hairy ELF
- loader code.
-Who: Andi Kleen <ak@suse.de>
-
----------------------------
-
What: remove EXPORT_SYMBOL(kernel_thread)
When: August 2006
Files: arch/*/kernel/*_ksyms.c
---------------------------
-What: CONFIG_FORCED_INLINING
-When: June 2006
-Why: Config option is there to see if gcc is good enough. (in january
- 2006). If it is, the behavior should just be the default. If it's not,
- the option should just go away entirely.
-Who: Arjan van de Ven
-
----------------------------
-
What: eepro100 network driver
When: January 2007
Why: replaced by the e100 driver
---------------------------
-What: USB driver API moves to EXPORT_SYMBOL_GPL
-When: February 2008
-Files: include/linux/usb.h, drivers/usb/core/driver.c
-Why: The USB subsystem has changed a lot over time, and it has been
- possible to create userspace USB drivers using usbfs/libusb/gadgetfs
- that operate as fast as the USB bus allows. Because of this, the USB
- subsystem will not be allowing closed source kernel drivers to
- register with it, after this grace period is over. If anyone needs
- any help in converting their closed source drivers over to use the
- userspace filesystems, please contact the
- linux-usb-devel@lists.sourceforge.net mailing list, and the developers
- there will be glad to help you out.
-Who: Greg Kroah-Hartman <gregkh@suse.de>
-
----------------------------
-
-What: vm_ops.nopage
-When: Soon, provided in-kernel callers have been converted
-Why: This interface is replaced by vm_ops.fault, but it has been around
- forever, is used by a lot of drivers, and doesn't cost much to
- maintain.
-Who: Nick Piggin <npiggin@suse.de>
-
----------------------------
-
What: PHYSDEVPATH, PHYSDEVBUS, PHYSDEVDRIVER in the uevent environment
When: October 2008
Why: The stacking of class devices makes these values misleading and
---------------------------
-What: i2c_adapter.list
-When: July 2007
-Why: Superfluous, this list duplicates the one maintained by the driver
- core.
-Who: Jean Delvare <khali@linux-fr.org>,
- David Brownell <dbrownell@users.sourceforge.net>
-
----------------------------
-
What: ACPI procfs interface
When: July 2008
Why: ACPI sysfs conversion should be finished by January 2008.
---------------------------
-What: i2c-ixp2000, i2c-ixp4xx and scx200_i2c drivers
-When: September 2007
-Why: Obsolete. The new i2c-gpio driver replaces all hardware-specific
- I2C-over-GPIO drivers.
-Who: Jean Delvare <khali@linux-fr.org>
-
----------------------------
-
-What: 'time' kernel boot parameter
-When: January 2008
-Why: replaced by 'printk.time=<value>' so that printk timestamps can be
- enabled or disabled as needed
-Who: Randy Dunlap <randy.dunlap@oracle.com>
-
----------------------------
-
-What: drivers depending on OSS_OBSOLETE
-When: options in 2.6.23, code in 2.6.25
-Why: obsolete OSS drivers
-Who: Adrian Bunk <bunk@stusta.de>
-
----------------------------
-
What: libata spindown skipping and warning
When: Dec 2008
Why: Some halt(8) implementations synchronize caches for and spin
---------------------------
-What: Legacy RTC drivers (under drivers/i2c/chips)
-When: November 2007
-Why: Obsolete. We have a RTC subsystem with better drivers.
-Who: Jean Delvare <khali@linux-fr.org>
+What: i386/x86_64 bzImage symlinks
+When: April 2010
+
+Why: The i386/x86_64 merge provides a symlink to the old bzImage
+ location so not yet updated user space tools, e.g. package
+ scripts, do not break.
+Who: Thomas Gleixner <tglx@linutronix.de>
---------------------------
-What: iptables SAME target
-When: 1.1. 2008
-Files: net/ipv4/netfilter/ipt_SAME.c, include/linux/netfilter_ipv4/ipt_SAME.h
-Why: Obsolete for multiple years now, NAT core provides the same behaviour.
- Unfixable broken wrt. 32/64 bit cleanness.
-Who: Patrick McHardy <kaber@trash.net>
+What (Why):
+ - include/linux/netfilter_ipv4/ipt_TOS.h ipt_tos.h header files
+ (superseded by xt_TOS/xt_tos target & match)
+
+ - "forwarding" header files like ipt_mac.h in
+ include/linux/netfilter_ipv4/ and include/linux/netfilter_ipv6/
+
+ - xt_CONNMARK match revision 0
+ (superseded by xt_CONNMARK match revision 1)
+
+ - xt_MARK target revisions 0 and 1
+ (superseded by xt_MARK match revision 2)
+
+ - xt_connmark match revision 0
+ (superseded by xt_connmark match revision 1)
+
+ - xt_conntrack match revision 0
+ (superseded by xt_conntrack match revision 1)
+
+ - xt_iprange match revision 0,
+ include/linux/netfilter_ipv4/ipt_iprange.h
+ (superseded by xt_iprange match revision 1)
+
+ - xt_mark match revision 0
+ (superseded by xt_mark match revision 1)
+
+ - xt_recent: the old ipt_recent proc dir
+ (superseded by /proc/net/xt_recent)
+
+When: January 2009 or Linux 2.7.0, whichever comes first
+Why: Superseded by newer revisions or modules
+Who: Jan Engelhardt <jengelh@computergmbh.de>
---------------------------
-What: The arch/ppc and include/asm-ppc directories
-When: Jun 2008
-Why: The arch/powerpc tree is the merged architecture for ppc32 and ppc64
- platforms. Currently there are efforts underway to port the remaining
- arch/ppc platforms to the merged tree. New submissions to the arch/ppc
- tree have been frozen with the 2.6.22 kernel release and that tree will
- remain in bug-fix only mode until its scheduled removal. Platforms
- that are not ported by June 2008 will be removed due to the lack of an
- interested maintainer.
-Who: linuxppc-dev@ozlabs.org
+What: b43 support for firmware revision < 410
+When: July 2008
+Why: The support code for the old firmware hurts code readability/maintainability
+ and slightly hurts runtime performance. Bugfixes for the old firmware
+ are not provided by Broadcom anymore.
+Who: Michael Buesch <mb@bu3sch.de>
---------------------------
-What: mthca driver's MSI support
-When: January 2008
-Files: drivers/infiniband/hw/mthca/*.[ch]
-Why: All mthca hardware also supports MSI-X, which provides
- strictly more functionality than MSI. So there is no point in
- having both MSI-X and MSI support in the driver.
-Who: Roland Dreier <rolandd@cisco.com>
+What: init_mm export
+When: 2.6.26
+Why: Not used in-tree. The current out-of-tree users used it to
+ work around problems in the CPA code which should be resolved
+ by now. One usecase was described to provide verification code
+ of the CPA operation. That's a good idea in general, but such
+ code / infrastructure should be in the kernel and not in some
+ out-of-tree driver.
+Who: Thomas Gleixner <tglx@linutronix.de>
+
+----------------------------
+
+What: usedac i386 kernel parameter
+When: 2.6.27
+Why: replaced by allowdac and no dac combination
+Who: Glauber Costa <gcosta@redhat.com>
---------------------------
-What: sk98lin network driver
-When: Feburary 2008
-Why: In kernel tree version of driver is unmaintained. Sk98lin driver
- replaced by the skge driver.
-Who: Stephen Hemminger <shemminger@linux-foundation.org>
+What: remove HID compat support
+When: 2.6.29
+Why: needed only as a temporary solution until distros fix themselves up
+Who: Jiri Slaby <jirislaby@gmail.com>
---------------------------
-What: i386/x86_64 bzImage symlinks
-When: April 2008
+What: print_fn_descriptor_symbol()
+When: October 2009
+Why: The %pF vsprintf format provides the same functionality in a
+ simpler way. print_fn_descriptor_symbol() is deprecated but
+ still present to give out-of-tree modules time to change.
+Who: Bjorn Helgaas <bjorn.helgaas@hp.com>
-Why: The i386/x86_64 merge provides a symlink to the old bzImage
- location so not yet updated user space tools, e.g. package
- scripts, do not break.
-Who: Thomas Gleixner <tglx@linutronix.de>
+---------------------------
+
+What: /sys/o2cb symlink
+When: January 2010
+Why: /sys/fs/o2cb is the proper location for this information - /sys/o2cb
+ exists as a symlink for backwards compatibility for old versions of
+ ocfs2-tools. 2 years should be sufficient time to phase in new versions
+ which know to look in /sys/fs/o2cb.
+Who: ocfs2-devel@oss.oracle.com
+
+---------------------------
+
+What: SCTP_GET_PEER_ADDRS_NUM_OLD, SCTP_GET_PEER_ADDRS_OLD,
+ SCTP_GET_LOCAL_ADDRS_NUM_OLD, SCTP_GET_LOCAL_ADDRS_OLD
+When: June 2009
+Why: A newer version of the options have been introduced in 2005 that
+ removes the limitions of the old API. The sctp library has been
+ converted to use these new options at the same time. Any user
+ space app that directly uses the old options should convert to using
+ the new options.
+Who: Vlad Yasevich <vladislav.yasevich@hp.com>
+
+---------------------------
+
+What: CONFIG_THERMAL_HWMON
+When: January 2009
+Why: This option was introduced just to allow older lm-sensors userspace
+ to keep working over the upgrade to 2.6.26. At the scheduled time of
+ removal fixed lm-sensors (2.x or 3.x) should be readily available.
+Who: Rene Herman <rene.herman@gmail.com>
---------------------------
-What: shaper network driver
-When: January 2008
-Files: drivers/net/shaper.c, include/linux/if_shaper.h
-Why: This driver has been marked obsolete for many years.
- It was only designed to work on lower speed links and has design
- flaws that lead to machine crashes. The qdisc infrastructure in
- 2.4 or later kernels, provides richer features and is more robust.
-Who: Stephen Hemminger <shemminger@linux-foundation.org>
+What: Code that is now under CONFIG_WIRELESS_EXT_SYSFS
+ (in net/core/net-sysfs.c)
+When: After the only user (hal) has seen a release with the patches
+ for enough time, probably some time in 2010.
+Why: Over 1K .text/.data size reduction, data is available in other
+ ways (ioctls)
+Who: Johannes Berg <johannes@sipsolutions.net>
---------------------------
+
+What: CONFIG_NF_CT_ACCT
+When: 2.6.29
+Why: Accounting can now be enabled/disabled without kernel recompilation.
+ Currently used only to set a default value for a feature that is also
+ controlled by a kernel/module/sysfs/sysctl parameter.
+Who: Krzysztof Piotr Oledzki <ole@ans.pl>
+
+---------------------------
+
+What: ide-scsi (BLK_DEV_IDESCSI)
+When: 2.6.29
+Why: The 2.6 kernel supports direct writing to ide CD drives, which
+ eliminates the need for ide-scsi. The new method is more
+ efficient in every way.
+Who: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
+
+---------------------------
+
+What: i2c_attach_client(), i2c_detach_client(), i2c_driver->detach_client()
+When: 2.6.29 (ideally) or 2.6.30 (more likely)
+Why: Deprecated by the new (standard) device driver binding model. Use
+ i2c_driver->probe() and ->remove() instead.
+Who: Jean Delvare <khali@linux-fr.org>