---------------------------
+What: old static regulatory information and ieee80211_regdom module parameter
+When: 2.6.29
+Why: The old regulatory infrastructure has been replaced with a new one
+ which does not require statically defined regulatory domains. We do
+ not want to keep static regulatory domains in the kernel due to the
+ the dynamic nature of regulatory law and localization. We kept around
+ the old static definitions for the regulatory domains of:
+ * US
+ * JP
+ * EU
+ and used by default the US when CONFIG_WIRELESS_OLD_REGULATORY was
+ set. We also kept around the ieee80211_regdom module parameter in case
+ some applications were relying on it. Changing regulatory domains
+ can now be done instead by using nl80211, as is done with iw.
+Who: Luis R. Rodriguez <lrodriguez@atheros.com>
+
+---------------------------
+
What: dev->power.power_state
When: July 2007
Why: Broken design for runtime control over driver power states, confusing
---------------------------
-What: old NCR53C9x driver
-When: October 2007
-Why: Replaced by the much better esp_scsi driver. Actual low-level
- driver can be ported over almost trivially.
-Who: David Miller <davem@davemloft.net>
- Christoph Hellwig <hch@lst.de>
-
----------------------------
-
What: Video4Linux API 1 ioctls and video_decoder.h from Video devices.
When: December 2008
Files: include/linux/video_decoder.h include/linux/videodev.h
---------------------------
-What: eepro100 network driver
-When: January 2007
-Why: replaced by the e100 driver
-Who: Adrian Bunk <bunk@stusta.de>
-
----------------------------
-
What: Unused EXPORT_SYMBOL/EXPORT_SYMBOL_GPL exports
(temporary transition config option provided until then)
The transition config option will also be removed at the same time.
---------------------------
-What: vm_ops.nopage
-When: Soon, provided in-kernel callers have been converted
-Why: This interface is replaced by vm_ops.fault, but it has been around
- forever, is used by a lot of drivers, and doesn't cost much to
- maintain.
-Who: Nick Piggin <npiggin@suse.de>
-
----------------------------
-
What: PHYSDEVPATH, PHYSDEVBUS, PHYSDEVDRIVER in the uevent environment
When: October 2008
Why: The stacking of class devices makes these values misleading and
---------------------------
-What: The arch/ppc and include/asm-ppc directories
-When: Jun 2008
-Why: The arch/powerpc tree is the merged architecture for ppc32 and ppc64
- platforms. Currently there are efforts underway to port the remaining
- arch/ppc platforms to the merged tree. New submissions to the arch/ppc
- tree have been frozen with the 2.6.22 kernel release and that tree will
- remain in bug-fix only mode until its scheduled removal. Platforms
- that are not ported by June 2008 will be removed due to the lack of an
- interested maintainer.
-Who: linuxppc-dev@ozlabs.org
-
----------------------------
-
-What: sk98lin network driver
-When: Feburary 2008
-Why: In kernel tree version of driver is unmaintained. Sk98lin driver
- replaced by the skge driver.
-Who: Stephen Hemminger <shemminger@linux-foundation.org>
-
----------------------------
-
What: i386/x86_64 bzImage symlinks
When: April 2010
---------------------------
----------------------------
-
-What: i2c-i810, i2c-prosavage and i2c-savage4
-When: May 2008
-Why: These drivers are superseded by i810fb, intelfb and savagefb.
-Who: Jean Delvare <khali@linux-fr.org>
-
----------------------------
-
-What: bcm43xx wireless network driver
-When: 2.6.26
-Files: drivers/net/wireless/bcm43xx
-Why: This driver's functionality has been replaced by the
- mac80211-based b43 and b43legacy drivers.
-Who: John W. Linville <linville@tuxdriver.com>
-
----------------------------
-
-What: ieee80211 softmac wireless networking component
-When: 2.6.26 (or after removal of bcm43xx and port of zd1211rw to mac80211)
-Files: net/ieee80211/softmac
-Why: No in-kernel drivers will depend on it any longer.
-Who: John W. Linville <linville@tuxdriver.com>
-
----------------------------
-
-What: rc80211-simple rate control algorithm for mac80211
-When: 2.6.26
-Files: net/mac80211/rc80211-simple.c
-Why: This algorithm was provided for reference but always exhibited bad
- responsiveness and performance and has some serious flaws. It has been
- replaced by rc80211-pid.
-Who: Stefano Brivio <stefano.brivio@polimi.it>
-
----------------------------
-
What (Why):
- include/linux/netfilter_ipv4/ipt_TOS.h ipt_tos.h header files
(superseded by xt_TOS/xt_tos target & match)
- xt_mark match revision 0
(superseded by xt_mark match revision 1)
+ - xt_recent: the old ipt_recent proc dir
+ (superseded by /proc/net/xt_recent)
+
When: January 2009 or Linux 2.7.0, whichever comes first
Why: Superseded by newer revisions or modules
Who: Jan Engelhardt <jengelh@computergmbh.de>
---------------------------
-What: Solaris/SunOS syscall and binary support on Sparc
-When: 2.6.26
-Why: Largely unmaintained and almost entirely unused. File system
- layering used to divert library and dynamic linker searches to
- /usr/gnemul is extremely buggy and unfixable. Making it work
- is largely pointless as without a lot of work only the most
- trivial of Solaris binaries can work with the emulation code.
-Who: David S. Miller <davem@davemloft.net>
-
----------------------------
-
What: init_mm export
When: 2.6.26
Why: Not used in-tree. The current out-of-tree users used it to
code / infrastructure should be in the kernel and not in some
out-of-tree driver.
Who: Thomas Gleixner <tglx@linutronix.de>
+
+----------------------------
+
+What: usedac i386 kernel parameter
+When: 2.6.27
+Why: replaced by allowdac and no dac combination
+Who: Glauber Costa <gcosta@redhat.com>
+
+---------------------------
+
+What: remove HID compat support
+When: 2.6.29
+Why: needed only as a temporary solution until distros fix themselves up
+Who: Jiri Slaby <jirislaby@gmail.com>
+
+---------------------------
+
+What: print_fn_descriptor_symbol()
+When: October 2009
+Why: The %pF vsprintf format provides the same functionality in a
+ simpler way. print_fn_descriptor_symbol() is deprecated but
+ still present to give out-of-tree modules time to change.
+Who: Bjorn Helgaas <bjorn.helgaas@hp.com>
+
+---------------------------
+
+What: /sys/o2cb symlink
+When: January 2010
+Why: /sys/fs/o2cb is the proper location for this information - /sys/o2cb
+ exists as a symlink for backwards compatibility for old versions of
+ ocfs2-tools. 2 years should be sufficient time to phase in new versions
+ which know to look in /sys/fs/o2cb.
+Who: ocfs2-devel@oss.oracle.com
+
+---------------------------
+
+What: SCTP_GET_PEER_ADDRS_NUM_OLD, SCTP_GET_PEER_ADDRS_OLD,
+ SCTP_GET_LOCAL_ADDRS_NUM_OLD, SCTP_GET_LOCAL_ADDRS_OLD
+When: June 2009
+Why: A newer version of the options have been introduced in 2005 that
+ removes the limitions of the old API. The sctp library has been
+ converted to use these new options at the same time. Any user
+ space app that directly uses the old options should convert to using
+ the new options.
+Who: Vlad Yasevich <vladislav.yasevich@hp.com>
+
+---------------------------
+
+What: CONFIG_THERMAL_HWMON
+When: January 2009
+Why: This option was introduced just to allow older lm-sensors userspace
+ to keep working over the upgrade to 2.6.26. At the scheduled time of
+ removal fixed lm-sensors (2.x or 3.x) should be readily available.
+Who: Rene Herman <rene.herman@gmail.com>
+
+---------------------------
+
+What: Code that is now under CONFIG_WIRELESS_EXT_SYSFS
+ (in net/core/net-sysfs.c)
+When: After the only user (hal) has seen a release with the patches
+ for enough time, probably some time in 2010.
+Why: Over 1K .text/.data size reduction, data is available in other
+ ways (ioctls)
+Who: Johannes Berg <johannes@sipsolutions.net>
+
+---------------------------
+
+What: CONFIG_NF_CT_ACCT
+When: 2.6.29
+Why: Accounting can now be enabled/disabled without kernel recompilation.
+ Currently used only to set a default value for a feature that is also
+ controlled by a kernel/module/sysfs/sysctl parameter.
+Who: Krzysztof Piotr Oledzki <ole@ans.pl>
+
+---------------------------
+
+What: ide-scsi (BLK_DEV_IDESCSI)
+When: 2.6.29
+Why: The 2.6 kernel supports direct writing to ide CD drives, which
+ eliminates the need for ide-scsi. The new method is more
+ efficient in every way.
+Who: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
+
+---------------------------
+
+What: i2c_attach_client(), i2c_detach_client(), i2c_driver->detach_client()
+When: 2.6.29 (ideally) or 2.6.30 (more likely)
+Why: Deprecated by the new (standard) device driver binding model. Use
+ i2c_driver->probe() and ->remove() instead.
+Who: Jean Delvare <khali@linux-fr.org>