---------------------------
-What: devfs
-When: July 2005
-Files: fs/devfs/*, include/linux/devfs_fs*.h and assorted devfs
- function calls throughout the kernel tree
-Why: It has been unmaintained for a number of years, has unfixable
- races, contains a naming policy within the kernel that is
- against the LSB, and can be replaced by using udev.
-Who: Greg Kroah-Hartman <greg@kroah.com>
+What: /sys/devices/.../power/state
+ dev->power.power_state
+ dpm_runtime_{suspend,resume)()
+When: July 2007
+Why: Broken design for runtime control over driver power states, confusing
+ driver-internal runtime power management with: mechanisms to support
+ system-wide sleep state transitions; event codes that distinguish
+ different phases of swsusp "sleep" transitions; and userspace policy
+ inputs. This framework was never widely used, and most attempts to
+ use it were broken. Drivers should instead be exposing domain-specific
+ interfaces either to kernel or to userspace.
+Who: Pavel Machek <pavel@suse.cz>
---------------------------
---------------------------
-What: drivers depending on OBSOLETE_OSS_DRIVER
-When: January 2006
-Why: OSS drivers with ALSA replacements
-Who: Adrian Bunk <bunk@stusta.de>
+What: raw1394: requests of type RAW1394_REQ_ISO_SEND, RAW1394_REQ_ISO_LISTEN
+When: June 2007
+Why: Deprecated in favour of the more efficient and robust rawiso interface.
+ Affected are applications which use the deprecated part of libraw1394
+ (raw1394_iso_write, raw1394_start_iso_write, raw1394_start_iso_rcv,
+ raw1394_stop_iso_rcv) or bypass libraw1394.
+Who: Dan Dennedy <dan@dennedy.org>, Stefan Richter <stefanr@s5r6.in-berlin.de>
---------------------------
-What: RCU API moves to EXPORT_SYMBOL_GPL
-When: April 2006
-Files: include/linux/rcupdate.h, kernel/rcupdate.c
-Why: Outside of Linux, the only implementations of anything even
- vaguely resembling RCU that I am aware of are in DYNIX/ptx,
- VM/XA, Tornado, and K42. I do not expect anyone to port binary
- drivers or kernel modules from any of these, since the first two
- are owned by IBM and the last two are open-source research OSes.
- So these will move to GPL after a grace period to allow
- people, who might be using implementations that I am not aware
- of, to adjust to this upcoming change.
-Who: Paul E. McKenney <paulmck@us.ibm.com>
+What: dv1394 driver (CONFIG_IEEE1394_DV1394)
+When: June 2007
+Why: Replaced by raw1394 + userspace libraries, notably libiec61883. This
+ shift of application support has been indicated on www.linux1394.org
+ and developers' mailinglists for quite some time. Major applications
+ have been converted, with the exception of ffmpeg and hence xine.
+ Piped output of dvgrab2 is a partial equivalent to dv1394.
+Who: Dan Dennedy <dan@dennedy.org>, Stefan Richter <stefanr@s5r6.in-berlin.de>
---------------------------
-What: raw1394: requests of type RAW1394_REQ_ISO_SEND, RAW1394_REQ_ISO_LISTEN
-When: November 2005
-Why: Deprecated in favour of the new ioctl-based rawiso interface, which is
- more efficient. You should really be using libraw1394 for raw1394
- access anyway.
-Who: Jody McIntyre <scjody@steamballoon.com>
+What: ieee1394 core's unused exports (CONFIG_IEEE1394_EXPORT_FULL_API)
+When: January 2007
+Why: There are no projects known to use these exported symbols, except
+ dfg1394 (uses one symbol whose functionality is core-internal now).
+Who: Stefan Richter <stefanr@s5r6.in-berlin.de>
+
+---------------------------
+
+What: ieee1394's *_oui sysfs attributes (CONFIG_IEEE1394_OUI_DB)
+When: January 2007
+Files: drivers/ieee1394/: oui.db, oui2c.sh
+Why: big size, little value
+Who: Stefan Richter <stefanr@s5r6.in-berlin.de>
---------------------------
What: Video4Linux API 1 ioctls and video_decoder.h from Video devices.
-When: July 2006
+When: December 2006
Why: V4L1 AP1 was replaced by V4L2 API. during migration from 2.4 to 2.6
series. The old API have lots of drawbacks and don't provide enough
means to work with all video and audio standards. The newer API is
---------------------------
-What: remove EXPORT_SYMBOL(panic_timeout)
-When: April 2006
-Files: kernel/panic.c
-Why: No modular usage in the kernel.
-Who: Adrian Bunk <bunk@stusta.de>
-
----------------------------
-
-What: remove EXPORT_SYMBOL(insert_resource)
-When: April 2006
-Files: kernel/resource.c
-Why: No modular usage in the kernel.
-Who: Adrian Bunk <bunk@stusta.de>
-
----------------------------
-
What: PCMCIA control ioctl (needed for pcmcia-cs [cardmgr, cardctl])
When: November 2005
Files: drivers/pcmcia/: pcmcia_ioctl.c
---------------------------
-What: ip_queue and ip6_queue (old ipv4-only and ipv6-only netfilter queue)
-When: December 2005
-Why: This interface has been obsoleted by the new layer3-independent
- "nfnetlink_queue". The Kernel interface is compatible, so the old
- ip[6]tables "QUEUE" targets still work and will transparently handle
- all packets into nfnetlink queue number 0. Userspace users will have
- to link against API-compatible library on top of libnfnetlink_queue
- instead of the current 'libipq'.
-Who: Harald Welte <laforge@netfilter.org>
-
----------------------------
-
-What: EXPORT_SYMBOL(lookup_hash)
-When: January 2006
-Why: Too low-level interface. Use lookup_one_len or lookup_create instead.
+What: remove EXPORT_SYMBOL(kernel_thread)
+When: August 2006
+Files: arch/*/kernel/*_ksyms.c
+Why: kernel_thread is a low-level implementation detail. Drivers should
+ use the <linux/kthread.h> API instead which shields them from
+ implementation details and provides a higherlevel interface that
+ prevents bugs and code duplication
Who: Christoph Hellwig <hch@lst.de>
---------------------------
---------------------------
-What: START_ARRAY ioctl for md
-When: July 2006
-Files: drivers/md/md.c
-Why: Not reliable by design - can fail when most needed.
- Alternatives exist
-Who: NeilBrown <neilb@suse.de>
-
----------------------------
-
-What: au1x00_uart driver
-When: January 2006
-Why: The 8250 serial driver now has the ability to deal with the differences
- between the standard 8250 family of UARTs and their slightly strange
- brother on Alchemy SOCs. The loss of features is not considered an
- issue.
-Who: Ralf Baechle <ralf@linux-mips.org>
-
----------------------------
-
What: eepro100 network driver
When: January 2007
Why: replaced by the e100 driver
---------------------------
-What: Legacy /proc/pci interface (PCI_LEGACY_PROC)
-When: March 2006
-Why: deprecated since 2.5.53 in favor of lspci(8)
-Who: Adrian Bunk <bunk@stusta.de>
+What: drivers depending on OSS_OBSOLETE_DRIVER
+When: options in 2.6.20, code in 2.6.22
+Why: OSS drivers with ALSA replacements
+Who: Adrian Bunk <bunk@stusta.de>
---------------------------
---------------------------
+What: Usage of invalid timevals in setitimer
+When: March 2007
+Why: POSIX requires to validate timevals in the setitimer call. This
+ was never done by Linux. The invalid (e.g. negative timevals) were
+ silently converted to more or less random timeouts and intervals.
+ Until the removal a per boot limited number of warnings is printed
+ and the timevals are sanitized.
+
+Who: Thomas Gleixner <tglx@linutronix.de>
+
+---------------------------
+
What: I2C interface of the it87 driver
When: January 2007
Why: The ISA interface is faster and should be always available. The I2C
probing is also known to cause trouble in at least one case (see
bug #5889.)
Who: Jean Delvare <khali@linux-fr.org>
+
+---------------------------
+
+What: Unused EXPORT_SYMBOL/EXPORT_SYMBOL_GPL exports
+ (temporary transition config option provided until then)
+ The transition config option will also be removed at the same time.
+When: before 2.6.19
+Why: Unused symbols are both increasing the size of the kernel binary
+ and are often a sign of "wrong API"
+Who: Arjan van de Ven <arjan@linux.intel.com>
+
+---------------------------
+
+What: mount/umount uevents
+When: February 2007
+Why: These events are not correct, and do not properly let userspace know
+ when a file system has been mounted or unmounted. Userspace should
+ poll the /proc/mounts file instead to detect this properly.
+Who: Greg Kroah-Hartman <gregkh@suse.de>
+
+---------------------------
+
+What: USB driver API moves to EXPORT_SYMBOL_GPL
+When: February 2008
+Files: include/linux/usb.h, drivers/usb/core/driver.c
+Why: The USB subsystem has changed a lot over time, and it has been
+ possible to create userspace USB drivers using usbfs/libusb/gadgetfs
+ that operate as fast as the USB bus allows. Because of this, the USB
+ subsystem will not be allowing closed source kernel drivers to
+ register with it, after this grace period is over. If anyone needs
+ any help in converting their closed source drivers over to use the
+ userspace filesystems, please contact the
+ linux-usb-devel@lists.sourceforge.net mailing list, and the developers
+ there will be glad to help you out.
+Who: Greg Kroah-Hartman <gregkh@suse.de>
+
+---------------------------
+
+What: find_trylock_page
+When: January 2007
+Why: The interface no longer has any callers left in the kernel. It
+ is an odd interface (compared with other find_*_page functions), in
+ that it does not take a refcount to the page, only the page lock.
+ It should be replaced with find_get_page or find_lock_page if possible.
+ This feature removal can be reevaluated if users of the interface
+ cannot cleanly use something else.
+Who: Nick Piggin <npiggin@suse.de>
+
+---------------------------
+
+What: Interrupt only SA_* flags
+When: Januar 2007
+Why: The interrupt related SA_* flags are replaced by IRQF_* to move them
+ out of the signal namespace.
+
+Who: Thomas Gleixner <tglx@linutronix.de>
+
+---------------------------
+
+What: i2c-ite and i2c-algo-ite drivers
+When: September 2006
+Why: These drivers never compiled since they were added to the kernel
+ tree 5 years ago. This feature removal can be reevaluated if
+ someone shows interest in the drivers, fixes them and takes over
+ maintenance.
+ http://marc.theaimsgroup.com/?l=linux-mips&m=115040510817448
+Who: Jean Delvare <khali@linux-fr.org>
+
+---------------------------
+
+What: Bridge netfilter deferred IPv4/IPv6 output hook calling
+When: January 2007
+Why: The deferred output hooks are a layering violation causing unusual
+ and broken behaviour on bridge devices. Examples of things they
+ break include QoS classifation using the MARK or CLASSIFY targets,
+ the IPsec policy match and connection tracking with VLANs on a
+ bridge. Their only use is to enable bridge output port filtering
+ within iptables with the physdev match, which can also be done by
+ combining iptables and ebtables using netfilter marks. Until it
+ will get removed the hook deferral is disabled by default and is
+ only enabled when needed.
+
+Who: Patrick McHardy <kaber@trash.net>
+
+---------------------------
+
+What: PHYSDEVPATH, PHYSDEVBUS, PHYSDEVDRIVER in the uevent environment
+When: October 2008
+Why: The stacking of class devices makes these values misleading and
+ inconsistent.
+ Class devices should not carry any of these properties, and bus
+ devices have SUBSYTEM and DRIVER as a replacement.
+Who: Kay Sievers <kay.sievers@suse.de>
+
+---------------------------
+
+What: i2c-isa
+When: December 2006
+Why: i2c-isa is a non-sense and doesn't fit in the device driver
+ model. Drivers relying on it are better implemented as platform
+ drivers.
+Who: Jean Delvare <khali@linux-fr.org>
+
+---------------------------
+
+What: IPv4 only connection tracking/NAT/helpers
+When: 2.6.22
+Why: The new layer 3 independant connection tracking replaces the old
+ IPv4 only version. After some stabilization of the new code the
+ old one will be removed.
+Who: Patrick McHardy <kaber@trash.net>
+
+---------------------------
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff