---------------------------
+What: MXSER
+When: December 2007
+Why: Old mxser driver is obsoleted by the mxser_new. Give it some time yet
+ and remove it.
+Who: Jiri Slaby <jirislaby@gmail.com>
+
+---------------------------
+
+What: V4L2 VIDIOC_G_MPEGCOMP and VIDIOC_S_MPEGCOMP
+When: October 2007
+Why: Broken attempt to set MPEG compression parameters. These ioctls are
+ not able to implement the wide variety of parameters that can be set
+ by hardware MPEG encoders. A new MPEG control mechanism was created
+ in kernel 2.6.18 that replaces these ioctls. See the V4L2 specification
+ (section 1.9: Extended controls) for more information on this topic.
+Who: Hans Verkuil <hverkuil@xs4all.nl> and
+ Mauro Carvalho Chehab <mchehab@infradead.org>
+
+---------------------------
+
What: /sys/devices/.../power/state
dev->power.power_state
dpm_runtime_{suspend,resume)()
---------------------------
-What: dv1394 driver (CONFIG_IEEE1394_DV1394)
-When: June 2007
-Why: Replaced by raw1394 + userspace libraries, notably libiec61883. This
- shift of application support has been indicated on www.linux1394.org
- and developers' mailinglists for quite some time. Major applications
- have been converted, with the exception of ffmpeg and hence xine.
- Piped output of dvgrab2 is a partial equivalent to dv1394.
-Who: Dan Dennedy <dan@dennedy.org>, Stefan Richter <stefanr@s5r6.in-berlin.de>
-
----------------------------
-
What: Video4Linux API 1 ioctls and video_decoder.h from Video devices.
When: December 2006
Why: V4L1 AP1 was replaced by V4L2 API. during migration from 2.4 to 2.6
---------------------------
-What: pci_module_init(driver)
-When: January 2007
-Why: Is replaced by pci_register_driver(pci_driver).
-Who: Richard Knutsson <ricknu-0@student.ltu.se> and Greg Kroah-Hartman <gregkh@suse.de>
-
----------------------------
-
-What: Usage of invalid timevals in setitimer
-When: March 2007
-Why: POSIX requires to validate timevals in the setitimer call. This
- was never done by Linux. The invalid (e.g. negative timevals) were
- silently converted to more or less random timeouts and intervals.
- Until the removal a per boot limited number of warnings is printed
- and the timevals are sanitized.
-
-Who: Thomas Gleixner <tglx@linutronix.de>
-
----------------------------
-
What: Unused EXPORT_SYMBOL/EXPORT_SYMBOL_GPL exports
(temporary transition config option provided until then)
The transition config option will also be removed at the same time.
---------------------------
-What: mount/umount uevents
-When: February 2007
-Why: These events are not correct, and do not properly let userspace know
- when a file system has been mounted or unmounted. Userspace should
- poll the /proc/mounts file instead to detect this properly.
-Who: Greg Kroah-Hartman <gregkh@suse.de>
-
----------------------------
-
What: USB driver API moves to EXPORT_SYMBOL_GPL
When: February 2008
Files: include/linux/usb.h, drivers/usb/core/driver.c
---------------------------
-What: find_trylock_page
-When: January 2007
-Why: The interface no longer has any callers left in the kernel. It
- is an odd interface (compared with other find_*_page functions), in
- that it does not take a refcount to the page, only the page lock.
- It should be replaced with find_get_page or find_lock_page if possible.
- This feature removal can be reevaluated if users of the interface
- cannot cleanly use something else.
-Who: Nick Piggin <npiggin@suse.de>
-
----------------------------
-
What: Interrupt only SA_* flags
-When: Januar 2007
+When: September 2007
Why: The interrupt related SA_* flags are replaced by IRQF_* to move them
out of the signal namespace.
---------------------------
-What: i2c_adapter.dev
- i2c_adapter.list
+What: i2c_adapter.list
When: July 2007
-Why: Superfluous, given i2c_adapter.class_dev:
- * The "dev" was a stand-in for the physical device node that legacy
- drivers would not have; but now it's almost always present. Any
- remaining legacy drivers must upgrade (they now trigger warnings).
- * The "list" duplicates class device children.
- The delay in removing this is so upgraded lm_sensors and libsensors
- can get deployed. (Removal causes minor changes in the sysfs layout,
- notably the location of the adapter type name and parenting the i2c
- client hardware directly from their controller.)
+Why: Superfluous, this list duplicates the one maintained by the driver
+ core.
Who: Jean Delvare <khali@linux-fr.org>,
David Brownell <dbrownell@users.sourceforge.net>
---------------------------
-What: IPv4 only connection tracking/NAT/helpers
-When: 2.6.22
-Why: The new layer 3 independant connection tracking replaces the old
- IPv4 only version. After some stabilization of the new code the
- old one will be removed.
-Who: Patrick McHardy <kaber@trash.net>
+What: drivers depending on OBSOLETE_OSS
+When: options in 2.6.22, code in 2.6.24
+Why: OSS drivers with ALSA replacements
+Who: Adrian Bunk <bunk@stusta.de>
---------------------------
---------------------------
-What: ACPI hotkey driver (CONFIG_ACPI_HOTKEY)
-When: 2.6.21
-Why: hotkey.c was an attempt to consolidate multiple drivers that use
- ACPI to implement hotkeys. However, hotkeys are not documented
- in the ACPI specification, so the drivers used undocumented
- vendor-specific hooks and turned out to be more different than
- the same.
-
- Further, the keys and the features supplied by each platform
- are different, so there will always be a need for
- platform-specific drivers.
-
- So the new plan is to delete hotkey.c and instead, work on the
- platform specific drivers to try to make them look the same
- to the user when they supply the same features.
-
- hotkey.c has always depended on CONFIG_EXPERIMENTAL
-
-Who: Len Brown <len.brown@intel.com>
-
----------------------------
-
What: /sys/firmware/acpi/namespace
When: 2.6.21
Why: The ACPI namespace is effectively the symbol list for
the BIOS can be extracted and disassembled with acpidump
and iasl as documented in the pmtools package here:
http://ftp.kernel.org/pub/linux/kernel/people/lenb/acpi/utils
-
Who: Len Brown <len.brown@intel.com>
---------------------------
+What: ACPI procfs interface
+When: July 2007
+Why: After ACPI sysfs conversion, ACPI attributes will be duplicated
+ in sysfs and the ACPI procfs interface should be removed.
+Who: Zhang Rui <rui.zhang@intel.com>
+
+---------------------------
+
What: /proc/acpi/button
When: August 2007
Why: /proc/acpi/button has been replaced by events to the input layer
---------------------------
-What: JFFS (version 1)
-When: 2.6.21
-Why: Unmaintained for years, superceded by JFFS2 for years.
-Who: Jeff Garzik <jeff@garzik.org>
+What: sk98lin network driver
+When: July 2007
+Why: In kernel tree version of driver is unmaintained. Sk98lin driver
+ replaced by the skge driver.
+Who: Stephen Hemminger <shemminger@osdl.org>
+
+---------------------------
+
+What: Compaq touchscreen device emulation
+When: Oct 2007
+Files: drivers/input/tsdev.c
+Why: The code says it was obsolete when it was written in 2001.
+ tslib is a userspace library which does anything tsdev can do and
+ much more besides in userspace where this code belongs. There is no
+ longer any need for tsdev and applications should have converted to
+ use tslib by now.
+ The name "tsdev" is also extremely confusing and lots of people have
+ it loaded when they don't need/use it.
+Who: Richard Purdie <rpurdie@rpsys.net>
+
+---------------------------
+
+What: i8xx_tco watchdog driver
+When: in 2.6.22
+Why: the i8xx_tco watchdog driver has been replaced by the iTCO_wdt
+ watchdog driver.
+Who: Wim Van Sebroeck <wim@iguana.be>
+
+---------------------------
+
+What: Multipath cached routing support in ipv4
+When: in 2.6.23
+Why: Code was merged, then submitter immediately disappeared leaving
+ us with no maintainer and lots of bugs. The code should not have
+ been merged in the first place, and many aspects of it's
+ implementation are blocking more critical core networking
+ development. It's marked EXPERIMENTAL and no distribution
+ enables it because it cause obscure crashes due to unfixable bugs
+ (interfaces don't return errors so memory allocation can't be
+ handled, calling contexts of these interfaces make handling
+ errors impossible too because they get called after we've
+ totally commited to creating a route object, for example).
+ This problem has existed for years and no forward progress
+ has ever been made, and nobody steps up to try and salvage
+ this code, so we're going to finally just get rid of it.
+Who: David S. Miller <davem@davemloft.net>
+
+---------------------------
+
+What: read_dev_chars(), read_conf_data{,_lpm}() (s390 common I/O layer)
+When: December 2007
+Why: These functions are a leftover from 2.4 times. They have several
+ problems:
+ - Duplication of checks that are done in the device driver's
+ interrupt handler
+ - common I/O layer can't do device specific error recovery
+ - device driver can't be notified for conditions happening during
+ execution of the function
+ Device drivers should issue the read device characteristics and read
+ configuration data ccws and do the appropriate error handling
+ themselves.
+Who: Cornelia Huck <cornelia.huck@de.ibm.com>
+
+---------------------------
+
+What: i2c-ixp2000, i2c-ixp4xx and scx200_i2c drivers
+When: September 2007
+Why: Obsolete. The new i2c-gpio driver replaces all hardware-specific
+ I2C-over-GPIO drivers.
+Who: Jean Delvare <khali@linux-fr.org>
+
+---------------------------
+
+What: drivers depending on OSS_OBSOLETE
+When: options in 2.6.23, code in 2.6.25
+Why: obsolete OSS drivers
+Who: Adrian Bunk <bunk@stusta.de>
---------------------------
+
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff